Used Trumatic 600 L for sale (69,055)

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 12,850 h, controller model: Siemens Sinumerik 840 D, laser power: 2,400 W, stroke rate (max.): 600 1/min, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, TECHNICAL DETAILS Laser type: TLF 2400 turbo Laser power: 2,700 W Working area X-axis without repositioning: 3,085 mm Working area Y-axis max.: 1,650 mm Travel speed X-axis max.: 90 m/min Travel speed Y-axis max.: 60 m/min Simultaneous travel speed: 108 m/min Stroke frequency max.: 600 1/min Punching diameter max.: 76.2 mm Sheet thickness max.: 8 mm Punching force: 220 kN Workpiece weight max.: 230 kg Number of tools in the magazine: 18 pcs. MACHINE DETAILS Control system (software version): Siemens Sinumerik 840 D Pneumatic connection: 25 Nm³/h Electrical connection: 65 kVA Operating hours since power-on: 12,850 h (as of 07/01/2026) Dimensions & Weight Footprint (L × W × H): 7,900 × 8,700 × 2,400 mm Machine weight: 25,000 kg EQUIPMENT Capacitive distance control ContourLas Compact dust extractor Slag detection 18 tool cassettes 18 die holders 3 clamping jaws Automatic tool changer with 18 stations Rotation of all tools NC-controlled digital, maintenance-free AC drives Automatic repositioning Rapid shutdown of the hydraulics Fpods Aiuybepfx Aikep Automatic shutdown Tool length compensation 2 small parts slides 500 × 500 mm with sensors Quality list Punch scrap extraction Forming capability Programmable punch lubrication Programmable clamping system Adaptive stroke length control Safety devices Remote diagnostics RJ45 network connection Detailed operating manual Extensive tool set including 18 setup cassettes Storage cabinet, green TRUMPF Quickset TRUMPF Easylod Table extensions (custom-built) for processing sheets up to 4 m in length Existing spare parts, uninspected and without storage Chip conveyor with container Air-cushioned installation Multitool Thread forming

Condition: good (used), functionality: fully functional, EWD High-Performance Frame Saw – HDN 600 / GDZ 600 / LSH Several EWD high-performance and full-frame saws in very good technical condition are available for sale. The machines can be offered individually or together, depending on the model. Complete overhaul possible upon request. EWD HDN 600 – High-Performance Frame Saw / High-Speed Frame Saw Well-maintained, high-performance EWD HDN 600 full-frame saw in very good condition. Already renewed or modernized: * Struts renewed (2026) * Flywheel renewed (2026) * Water-cooled guides installed (2026) Technical Data Manufacturer: EWD Type: HDN 600 Frame width: 710 × 735 mm Stroke: 600 mm Speed: 310 rpm Equipment / Scope of delivery * Fully hydraulic design * Automatic overhang adjustment * Hydraulic saw tensioner * Hydraulic saw chuck Fpjdj Ahfmdjpfx Aikep * Pre-selection gearbox * Drive motor * Hydraulically driven splitting wedge, type AVER * Remotely controlled clamping carriage * Electrical control cabinet with control system The system is in very good technical condition and can be completely overhauled and delivered upon request. --- EWD GDZ 600 – Full-Frame Saw / Frame Saw An EWD GDZ 600 is also available in very good condition. Equipment / Scope of delivery * Hydraulic saw tensioner * Splitting wedge * Pre-selection gearbox * Remotely controlled clamping carriage H38 * Cabin The EWD GDZ 600 can also be offered with a complete overhaul upon request. --- EWD LSH Frame Saw In addition, 1 x EWD LSH frame saw is in stock. Further details on design, equipment and technical condition are available upon request. Availability All machines can be inspected by appointment. Further technical data, photos, prices and information on the respective scope of delivery are available upon request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, controller manufacturer: Siemens, controller model: Sinumerik 840 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, laser power: 5,000 W, Equipment: cooling unit, dust extraction, safety light barrier, SPECIAL OFFER: MACHINE INCLUDING INSTALLATION!! MACHINE UNDERWENT A COMPLETE OVERHAUL IN 2019 TRUMPF Trumatic L 3050 – 5 kw INCLUDING INSTALLATION!! MACHINE WAS COMPLETELY OVERHAULED IN 2019! Regular maintenance has been performed since then (twice a year). TECHNICAL DATA: Manufacturer: TRUMPF Type: Trumatic L 3050 – 5 kw Year of Manufacture: 2003 Working Area: 3,000 x 1,500 x 115 mm Control System: Siemens Sinumerik 840 D Laser Power: 5,000 Watts Max. Sheet Thickness (Mild Steel): 25 mm Max. Sheet Thickness (Stainless Steel): 20 mm Max. Sheet Thickness (Aluminum): 12 mm Operating Hours (Laser): approx. 56,000 h / Beam: 19,000 h STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit - Laser unit: CO2 laser TLF 5000, high-frequency excited, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor for small parts/scrap - Drives: Gantry drive in combination with linear direct drives - Laser power control - HI-LAS high-pressure cutting - Plasma sensor system PMS - Fast processing with SprintLas - ContourLas for producing small holes - Programmable power cycles - Microweld - Cutting gas pressure setting programmable - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Quick-change device for cutting heads - Automatic sheet edge detection - Capacitive height control (DIAS) - Position laser diode - Automatic focus adjustment AutoLas Plus - Automatic shutdown - Work area lighting - Control system SIN 840D: Open control system based on PC, easy operation, online help, diagnosis functions, maintenance log, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: Multi-beam light barriers, beam guidance completely encapsulated and ventilated with nitrogen, monitoring system, multi-chamber extraction and compact dust collector, protective cabin - Network connection: BNC/RJ-45 network connection Fjdpfxj Ah Ughe Aikopp - Electrical equipment for three-phase 400 V / 50 Hz - Paint: Textured paint, white RAL 9002 / gentian blue RAL 5010 ADDITIONAL EQUIPMENT: - Additional laser cutting head with 9-inch lens

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 93,782 h, laser type: CO₂ laser, laser hours: 8,500 h, laser power: 2,700 W, Equipment: CE marking, cooling unit, dust extraction, fume extraction, safety light barrier, TruMatic 6000 K01 (1600) Large-format, 2700 Watt NC: 94,000 hours Laser on: 37,300 hours Beam on: 8,300 hours Sheetmaster Gripmaster+ shear Loading and unloading trolley Fire extinguishing system Parts conveyor Options: Fsdj Afxugepfx Aikopp Multishear Thread forming Marking/Signing

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 70,192 h, laser hours: 21,800 h, laser power: 2,700 W, TruMatic 6000 K01 (1600) Large-format, 2700 Watt NC: 70192 h Laser on: 70000 h Beam on: 21800 h Sheetmaster Gripmaster+ shear Loading and unloading cart Fire extinguishing system Parts conveyor Options: Feds Afxvgepfx Aikjpp Multishear Thread forming Marking/Signing

Condition: used, Year of construction: 2006, A CNC laser cutting machine with a 5kW CO₂ laser and automatic loading and unloading system is offered. Working area X/Y/Z: 4000mm/2000mm/115mm. Laser power: 5000W. Laser unit: CO₂ laser TLF 5000. Max. sheet thickness mild steel: 25mm. Max. sheet thickness stainless steel: 20mm. Max. sheet thickness aluminum: 15mm. Operating hours: Laser-on hours: 39625h. Beam-on hours: 14346h. Control: Siemens Sinumerik 840D. The system is equipped with an automatic loading system that supports sheet metal handling. Inspection possible by prior arrangement. Fsdpfx Aijz Sr Nkekjpp

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6471 REF: MM6471 2021 CERTUSS complete steam generator system (Type – CERTUSS Universal 600 TC) with chemical dosing and blow-down vessel, automatically PLC controlled. Fpjdpfxozn Rcij Aiksp The 2021 CERTUSS Universal 600 TC Complete Steam Generator System is a high-performance industrial steam generator designed to deliver reliable, energy-efficient process steam for continuous production environments. With a steam capacity of 600 kg/hour, the system is ideal for food and beverage processing, bakeries, meat and fish processing, ready meal production, pharmaceutical manufacturing, commercial laundries, chemical processing, and other industrial applications. Technical specification: ✅ Manufacturer - CERTUSS Dampfautomaten GmbH & Co. KG, Germany ✅ Model - Universal 600 TC FG/LPG. ✅ Serial number - 15716. ✅ Date of manufacture - 2021. ✅ Steam output - 600 kg/hour. ✅ Fuel - LPG (propane). ✅ Electrical supply - 3 x 415 V / 50 hz, 5.66 kVA, 16 A. ✅ Control - automatic, PLC. ✅ Run time - under 200 hours logged, according to the owner. Supplied with chemical dosing and blow-down vessel. Any further water treatment equipment is not confirmed. Located in Cullompton, Devon. Viewing by appointment. Buyer to remove.

Condition: good (used), functionality: fully functional, Year of construction: 1999, laser power: 2,400 W, sheet thickness (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,740 mm, overall weight: 23,000 kg, total length: 9,100 mm, total width: 7,900 mm, total height: 2,400 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, The machine is in good condition. Fpedpfx Aioymrn Eskop

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 71,929 h, machine/vehicle number: A0220A0610, control type: NC control, degree of automation: automatic, actuation type: electric, controller manufacturer: SIEMENS, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser source model: TLF4000, laser hours: 31,707 h, laser power: 4,000 W, type of cooling: water, total length: 3,000 mm, total width: 1,500 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Model Year: 2003 Resonator model: TLF4000 Total Cutting Hours: 14,124 hours Fpedpfszquhusx Aikjp Maintenance records are available for the machine since the year it was purchased. All functions of the machine are in working order. All maintenance has been completed thoroughly. The machine's RF tube has been recently replaced. The machine will be supplied with a Riedel cooling unit and a Vanterm suction unit. Total Operating Hours: 71,929 hours (This time only shows the number of hours the machine was on.) Total Laser Active Operating Hours: 31,707 (This time does not show the cutting hours; it only shows the hours the laser was active (on.) - In addition to sheet metal cutting, the machine also cuts pipes/profiles. - Cutting range: Black sheet metal 20mm max. Stainless steel: 8-10mm max. Aluminum: 5mm max. - Pallet dimensions: 1500x3000mm All maintenance on the machine has been performed on time and completely. Documentation is available. There are no malfunctioning parts on the machine.

Condition: excellent (used), Year of construction: 2020, operating hours: 3,700 h, functionality: fully functional, A scrap shear in perfect condition is for sale. Fjdpfxj Aia S De Aikjpp The machine can be inspected at any time.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: A0220A0572, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens Simunerik, laser type: CO₂ laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, workpiece weight (max.): 710 kg, input voltage: 400 V, input frequency: 50 Hz, overall weight: 11,500 kg, total length: 9,300 mm, total width: 4,600 mm, total height: 2,600 mm, year of last overhaul: 2023, Equipment: CE marking, documentation/manual, All services and overhauls carried out directly by the manufacturer (Trumpf). Inspection possible at any time. Assembly plan included. The machine was dismantled and stored with the assistance and supervision of Trumpf. Support with assembly and commissioning is also available upon request. Machine assembly plan attached to the documentation. The machine is being delivered including LIFTMASTER type LMZ3050 0556817 / 256417 / 9000 N load capacity / year of manufacture 2003. See details in the photos. Including loading and unloading cart Including longitudinal and transverse conveyor belts for small parts/waste Including safety barrier fencing The machine comes with a large spare parts inventory (price obtained from Trumpf: purchase value EUR 42,000.00). See list in the attachment. Fsdpfx Ajx Rt Ddjikopp Loading and transport of the machine was carried out by SCHWERLAST Austria (costs within Austria approx. EUR 6,000.00).

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, total height: 2,240 mm, overall weight: 3,500 kg, spindle speed (max.): 10,000 rpm, This 3-axis WAGNER WMC 600 L was manufactured in 2021, featuring a robust cast-iron frame and linear guides on all axes. It includes a Siemens 828 Basic ShopMill, an automatic double-arm tool changer with 16 stations, and a complete coolant system. The spindle supports speeds up to 10,000 rpm with a power of 11 kW. If you are looking to get high-quality milling capabilities consider the WAGNER WMC 600 L machine we have for sale. Contact us for more information. Additional equipment • Rigid cast-iron frame construction • Linear guides on all three axes • Automatic double-arm tool changer (16 stations) • Complete coolant system • Central automatic lubrication • Air blast system for spindle cleaning • Machine enclosure with doors • Machine and signal lights • Documentation in English • CE-certified Machine Benefits Qualitative Machine Benefits • Machine is in excellent condition. Technical Machine Benefits • Spindle motor power (siemens s6 40%): 11 kw spindle motor power (siemens s1 100%): 5. 5 kw • Tool magazine capacity: 16 tools • Tool holder: din 69871 a sk 40 • Maximum tool diameter: 89 mm Fjdpfx Aiozvu Rmekopp • Maximum tool weight: 7 kg • Tool change time: 2 seconds • Chip-to-chip time: 7 seconds • Table clamping surface: 800 x 400 mm • Table load capacity: 300 kg Extra Information Machine still under power Dimensions Machine Depth 2100 mm Technical Specification Taper Size SK 40

Condition: used, Trumpf Type: TC 6000 L 1300 Laser and punching machine Technical data: Power supply: 400V/50 Hz Fuse rating: 3 x 100 A Connected power: 65 kVA Working area X x Y without repositioning: Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (including 20 kN holding-down device): 220 kN Active holding-down device (programmable in stages): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum clearance height: In punching operation: 35 mm In laser operation: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous movement: Punching: 900 min Marking: 2800 min C-axis: Punching: 60 revolutions/min Thread forming: 330 revolutions/min Tools: Tool stations on linear magazine: 19 with 2 grippers Number of tools when using a multi-tool: 19 to 190 tools Rotation of all tools: 360° Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm on all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Positioning deviation: ± 0.1 mm Average position spread: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Loading and dismantling must be handled by the buyer! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Fpedezd Ulaspfx Aikjp We will be happy to answer any further questions you may have by telephone.

Year of construction: 1996, condition: ready for operation (used), A CNC punching and laser machine from Trumpf requiring repair, including laser source and high-frequency generator, is available. Cutting force: 220kN, laser power: 1500W, clamping power: 11kW, weight: approx. 18000kg. Error message: NCK deleted and buffer battery empty. An on-site inspection is possible. Fpodpfx Aiszfaaleksp

Condition: ready for operation (used), Year of construction: 1983, Hofmann AHW 600 L Surface Planer Planing width: 600 mm Cutter block with 2 strip knives Fpjdox S Na Rjpfx Aikjp Table length: 3000 mm Heavy cast iron construction Motor power: 5.5 HP Weight: 1050 kg Cutter block speed: 5000 rpm

Year of construction: 2006, operating hours: 46,547 h, condition: excellent (used), functionality: fully functional, Laser punch press Trumpf TruMatic 6000 L with TrumaLift SheetMaster, ToolMaster and GripMaster as well as and scissor lift table. SheetMaster: not only loads and unloads the machine, it also sorts the parts the parts reliably ToolMaster: automatically changes the tools quickly, safely and conveniently GripMaster: reliably moves residual grids and strips TECHNICAL DETAILS working area: 2585 x 1280 mm Control: Siemens Sinumerik 840 D laser power: 3200 watt sheet thickness mild steel: max. 8 mm sheet thickness stainless steel: max. 8 mm sheet thickness aluminum: max. 4 mm workpiece weight: max. 200 kg Accuracy: +/- 0.1 mm Punching force: 22 t punching diameter: max. 76,2 mm C-axis punching: 330 rpm stroke sequence: 450 - 1000 1/min stroke sequence marking: 2800 1/min MACHINE DETAILS Laser switch-on time: 46,547 h cutting time: 23.580 h length: 7500 mm width: 8100 mm Fedpfjn Nxw Dox Aikopp height: 2400 mm Weight: 16000 kg (basic machine) Operating voltage: 400 V / 50 Hz Connected load: 76 kVA

Condition: like new (used), Year of construction: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade 560 mm Motor power 6,5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100 - 4200 m/min Saw height control: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed 0 - 40 mm/s infinitely adjustable Cutting length 5-950 mm (9999 mm multiple stroke) Feed speed max. 500 mm/s Weight approx. 1900 kg Dimensions LxWxH 2200mm x2700mm x1950mm The machine is in mint condition, both technically and visually, following a completed retrofit. Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The programmed HMI control system ensures simple and very profitable operation of the machine. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI user interface - Replacement of the ball screw - Replacement of servo motor and servo inverter - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve terminal - Optimization of extraction performance - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab The machine also has: - Soundproof cabin - Splitting extension (for a high-quality cutting surface without return marks) - Height control fully electronic Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Mass clamping device for parallel sawing of several workpieces Fjdjuiy Hrepfx Aikjpp - Flat magazine for automatic feeding of up to 6 m long primary materials - Roller conveyors for primary material - Reinforced motor 18.0 KW (frequency-controlled) - Delivery and installation on your premises - Training of your employees

Condition: good (used), Year of construction: 2005, operating hours: 63,102 h, machine/vehicle number: A0230A1162, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 28,387 h, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, TRUMPF Trumatic L3050 Laser Cutting Machine Year of manufacture: 2005 Control system: Sinumerik 840D Laser type: TLF 6000 Laser power: 6000 W Working area X: 3000 mm Working area Y: 1500 mm Working area Z: 115 mm Max. speed X: 60 m/min Max. speed Y: 60 m/min Laser on hours: 63,102 h, Beam on hours: 28,387 h Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 15 mm Equipment: HI-LAS high-pressure cutting Cutting head with 5" lens Cutting head with 7.5" lens Quick-change cutting heads Sheet position detection system Laser positioning diode Programmable selection of cutting gases with stepless pressure adjustment Micro welds PMS plasma monitoring system Sprint-Las Head distance regulation (DIAS III) ContourLas AutoLas Plus Oil spray system Hydraulic pallet changer Work area lighting Fpsdpex Ap A Rofx Aikep Longitudinal conveyor Sectional extraction system Filtration system Automatic shut-off Light barriers Tele-service RJ 45 3.5'' floppy disk drive User manual Used machine in good condition, inspected by qualified personnel. Machine available in March 2026.

Year of construction: 2003, condition: ready for operation (used), Travel path X/Y/Z: 3000mm/1500mm/115mm, laser power: 5000W, cutting capacity mild steel/stainless steel/aluminium: 25mm/20mm/12mm, travel speed: 200m/min, cutting accuracy: 0.1mm. Machine dimensions X/Y/Z: 11000mm/4600mm/2400mm, weight: 12000kg, control: Siemens Sinumerik 840D. Includes conveyors, laser cutting heads with various lens sizes, Liftmaster R, and other peripheral equipment. Documentation available. An on-site inspection is possible. Fedpfxsxaph Us Aikepp

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,202 h, laser power: 2,700 W, travel distance X-axis: 2,500 mm, number of axes: 3, This 3-axis TRUMPF TRUMATIC L 2530 Plus was manufactured in 2005 and will come with a Storemaster. It features a powerful 2700 W laser and includes advanced equipment such as a laser cutting head with 3.75" and 7.5" lenses, automatic sheet edge detection, and programmable cutting gas selection. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L 2530 Plus CO2 laser cutting machine we have for sale. Contact us for further details. Fpjdpfxjz R Aa Rs Aikep - Mains Supply: 400 V / 50 Hz- Connected Load: 63 kVA- Control Voltage: 24 V =- Required Fuse Protection: 3x 100 A- Compressed Air Connection: 7-10 bar- Nitrogen Connection (N2): 30 bar- Oxygen Connection (O2): 16 bar- Standard Equipment: Hi-Las high-pressure cutting, Laser cutting head with 3.75" lens, Laser cutting head with 7.5" lens, Cutting head quick-change device, Automatic sheet outer edge detection, Positioning laser diode, Programmable cutting gas selection/pressure setting, Microweld, SprintLas, Capacitive height control (DIAS III), ContourLas, AutoLas Plus, Oil spray device, Automatic pallet changer, Working area lighting, Slag/small parts chute, Multi-chamber dust extraction, Compact dust extractor, Automatic shut-off, Safety devices, ToPs 100 lite, Tele-diagnosis device, RJ45 network connection- Special Equipment & Accessories: 3.5" floppy disk drive, Detailed operating manual, Automatic pallet changer with safety light barrier, AutoLas Plus, Clamping jaws for Pallet A+B (4 pcs each), Additional 3.75" laser cutting head, Loading device (overhauled in workshop 2017), Programming software TRUMPF TruTops Laser, Gas fittings, Teleservice via Internet- Chiller Unit (Riedel L15/21-TR3.23, YOM: 10/2004): 400 V / 50 Hz, 42 A, IP54, Refrigerant R134a (11.5 kg), Max working pressure 20.2 barStoremaster:- Drawer Usable Area: 2,500 x 1,250 mm- Max Load per Drawer (evenly distributed): 3,000 kg- Max Load per Top Level (evenly distributed): 3,000 kg- Max Load per Rack Block (evenly distributed): 60,000 kg- Max Load at Crane Hook: 325 kg- Max Load under Vacuum Lifter (evenly distributed): 180 kg- Special Equipment: SCHMALZ vacuum lifter- Dimensions (from technical drawing): Height ca. 3,500 mm / 4,170 mm (modified/adjusted height ca. 3,500 mm), Width ca. 3,600 mm - 5,900 mm depending on layout/extension, Depth ca. 2,700 mm - 4,700 mm- Upper Grid Floors Capacity: 7,500 kg surface load each

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive Fpsdpfx Aisuthz Tsksp - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Condition: used, Year of construction: 2008, machine/vehicle number: 02027-030418, Defects: Fodpfx Ais Aid D Iekopp - Lateral gas pressure cylinder defective - 1 aluminum part with a small crack (see photo)

Condition: good (used), Year of construction: 1995, SERIAL NUMBER: 6572818 Fodpjy T Ig Ejfx Aikspp PAPIER STAPELLIFT

Condition: used, Year of construction: 2004, Horizontal band saw HEMA HTR 600 Year of manufacture: 2004 Fpsdpfe Aigk Tox Aikep For various materials (depending on the installed saw blade) Technical data: Wheel diameter: 600 mm Working height: 955 mm Total height: 1800 mm Total width: 2550 mm Total length (conveyor belt): 2820 mm Max. cutting height (distance conveyor belt - saw blade): 140 mm Saw blade length: 5600 mm Saw blade width: 8 to 25 mm Saw blade thickness: 0.65 mm Cutting speed: 1640 m/min Conveyor belt speed: 0.5 to 5 m/min Conveyor belt width: 650 mm Weight approx. 700 kg Dust extraction connections - Cutting point: 100 mm - Deflection point: 100 mm - Conveyor belt extraction connection: 100 mm Motor power - machine: 2.2 kW Motor power - feed: 0.12 kW Voltage: 3 x 400V

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0100A0637, laser type: CO₂ laser, laser source manufacturer: trumpf, laser power: 2,000 W, input voltage: 24 V, input current: 100 A, input frequency: 4,000 Hz, type of input current: three-phase, type of cooling: water, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Trumpf Trumatic 6000, manufactured in 2007 – still in use and fully operational (used for stainless steel sheets, 0.8 – 2 mm thick). Fodoz Iwvgopfx Aikopp