Used Tnl for sale (60)

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, total height: 2,000 mm, total length: 2,600 mm, total width: 1,800 mm, overall weight: 4,700 kg, TONGTAI TOPPER TNL - 100 / CNC lathe / Fanuc OT control -CE marking -Fanuc OT control -TOOL EYE - tool measurement system -Max. turning diameter 390mm Gbodpfx Ajzyz U Teikew -Max. turning length 580mm -Bar capacity 51mm -Axis travels X / Z 200 & 600mm -Rapid traverse rate X / Z axis 20 & 24 m/min -Spindle bore diameter 62mm -Spindle speed range 45 - 4500 rpm -Turret 12 stations -Tool shank 25mm -Tool holder diameter 32mm -Spindle motor 15 KW -Tailstock -Foot switch -Machine feet -Chip conveyor -Complete documentation Dimensions L x W x H 2.6 x 1.8 x 2 meters / Weight 4700 Kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Control system: Traub TX 8i Main spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Counter spindle Max. bar diameter: 26 mm Gsdpez Erdtjfx Aiksbw Max. speed: 8,000 rpm Tooling system Number of turrets: 2 (upper and lower turret) Tool positions per turret: 12 stations, without drive Front tool holder, 5-position, with Z3 slide, without drive Rear machining station (5 tools), without drive Bar loader: IEMCA BOSS 432/44

Condition: used, Year of construction: 2017, operating hours: 13,700 h, machine/vehicle number: IntNr2316661, A CNC vertical turning center, TRAUB TNL 12, manufactured in 2017, equipped with a TRAUB TX8i-s control system and comprehensive peripherals, is for sale. The machine comes from the medical technology sector and is in exceptionally well-maintained condition, both visually and technically. General technical data Manufacturer: INDEX-Werke GmbH & Co. KG (TRAUB) Model: TNL 12 Year of manufacture: 2017 Control system: TRAUB SYSTEM TX8i-s CNC axes: 11 axes Max. bar diameter: 13 mm Max. turning length: 130 mm Operating hours (recorded) Control system ON: 22,868 h Production time: 13,620 h Spindle running time: 9,945 h Main spindle Max. speed: 12,000 rpm Drive power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-axis resolution: 0.001° Counter spindle Max. speed: 12,000 rpm Drive power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-axis resolution: 0.001° Tool carrier / Machining Tool turret: 2 turrets Tool stations: 6 stations each Powered tools: on all turret stations Tool drive (turret): Up to 8,000 rpm Tool drive power: 1.5 kW (25% duty cycle) Front machining unit: 4 tool stations Rear machining unit: 4 tool stations Simultaneous machining: Depends on the number of tool carriers Equipment and peripherals Bar feeder: FMB minimag 20 CO₂ extinguishing system: Kraft & Bauer FB 703 Coolant treatment: RESY compact belt filter system Oil mist extraction: NOVA, mounted on the machine Electrical connection data Gbsdps Ahfarefx Aikjw Voltage: 400 V / 50 Hz / 3-phase Connected power: 16 kW / 19 kVA Rated current: 27 A The machine can be inspected by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 8,000 rpm, number of axes: 7, This 7-axis TRAUB TNL 32 7B swiss type turning machine was manufactured in 2014. It features a TX8i-s control with a 64-bit RISC CNC/PLC processor, color TFT display, and electronic handwheel. The main spindle supports a 32 mm bore, and the machine includes a sub-spindle with a C-axis. It offers a dual-driven upper tool turret and a lower turret with nine tool holders. Consider the opportunity to buy this TRAUB TNL 32 7Bswiss type turning machine. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber-optic PC; color TFT flat-panel display; electronic handwheel • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), tapping without compensating chuck, parting tool breakage monitoring, parting tool ejection monitoring, axis shutdown, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bore/bar capacity; C-axis max speed 8,000 rpm • Max stroke: 305 mm (L version) / 127 mm (K version) • Sub-spindle: Partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter-spindle operation • Measuring/feedback: Glass scales on X-axis (upper and lower turrets); rotary encoder on C-axis • Back working: 8-position back table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal device and counter clamping pressure device on main and counter spindles • Coolant system not included, it is currently connected to a central one • Extraction: Connection D 150 mm for central extraction Additional equipment Gbodpfx Aiex D Drcjkjw • bar feeder • 7B Version Technical Specification Counter Spindle No

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr2316671, A CNC vertical turning centre, TRAUB TNL 12, manufactured in 2005, equipped with a TRAUB TX8i-s control system and extensive peripherals, is for sale. This machine originates from the medical technology sector and is in exceptionally well-maintained condition, both visually and technically. General Technical Data Manufacturer: INDEX-Werke GmbH & Co. KG (TRAUB) Model: TNL 12 Year of Manufacture: 2005 Control System: TRAUB SYSTEM TX8i-s CNC Axes: 11 axes Max. Bar Diameter: 13 mm Max. Turning Length: 130 mm Operating Hours (Recorded) Control ON: 38,120 h Production Time: 22,345 h Spindle Run Time: 15,543 h Main Spindle Max. Speed: 12,000 rpm Drive Power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-Axis Resolution: 0.001° Gjdo Ahfavepfx Aikobw Counter Spindle Max. Speed: 12,000 rpm Drive Power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-Axis Resolution: 0.001° Tool Carrier / Machining Tool Turret: 2 turrets Tool Stations: 6 stations each Powered Tools: on all turret stations Tool Drive (Turret): Up to 8,000 rpm Drive Power (Tool Drive): 1.5 kW (25% duty cycle) Front Machining Unit: 4 tool stations Rear Machining Unit: 4 tool stations Simultaneous Machining: Depends on the number of tool carriers Equipment and Peripherals Bar Feeder Magazine: FMB minimag 20 CO₂ Extinguishing System: Kraft & Bauer FB 703 Coolant Treatment: RESY compact belt filter system Oil Mist Extraction: NOVA, mounted on the machine Electrical Connection Values Voltage: 400 V / 50 Hz / 3-phase Connected Load: 16 kW / 19 kVA Rated Current: 27 A The machine can be inspected by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Year of construction: 2003, condition: used, Max. bar capacity: 13mm, max. turning length: 130mm, connected load: 18kW, control system: TRAUB SYSTEM TX8i-s, including FMB Minimag 3200 bar feeder. Machine is fully functional, no known technical defects. An on-site inspection is possible. Gbjdpfx Ao Ahq Rajikow

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Gbodpfozxihxjx Aikow

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Gsdpfx Aiozxigzjkobw

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Gsdpfx Aezxihfsikjbw

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Gsdpfezxihrjx Aikobw

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Gbodpfx Ajzxiguoikjw

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Gedozxig Ispfx Aikebw

Condition: used, Swiss-type cnc lathe TRAUB TNL 12/7 Gbedezxii Aepfx Aikjw

Condition: good (used), Benzinger TNL / TRP I CNC Precision Lathe Manufacturer's specifications, deviations are possible. Center height: 80.5 mm Gbsdpshufc Ejfx Aikjw Max. turning length: 100 mm Max. swing diameter over bed: 220 mm Max. swing diameter over cross slide: 130 mm Max. travel length in x direction: 300 mm Max. travel length in z direction: 240 mm Power supply: 380 V 50 Hz CNC Numerical Control: Bosch CC 100 T Accessories/Special Equipment: TRP Swing Loader Complete factory closure, large selection of storage platforms, pallet racks, shelving units, and paternosters. High-quality industrial machines, lathes, grinders, and hand tools Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Gedjzxih Ejpfx Aikjbw

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Gbsdpfozxiicjx Aikjw

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Gedezxihlepfx Aiksbw

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Godpfszxignex Aikjbw

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Gjdozxiiijpfx Aiksbw

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Gbsdpjzxih Sofx Aikew

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Gbjdpfezxiipjx Aikew

Condition: excellent (used), CNC machine Traub TNL 26 Condition used, in good condition Sale to the exclusion of any warranty Gjdpfxohlp Sde Aikjbw

Condition: good (used), Benzinger TNL NCS1J Lathe  Manufacturer's machine data, deviations possible.  centre height: 80 mm max. turning length 100 mm max. turning diameter over. bed 220 mm max. revolving diameter over. face slide 140 mm max path length in x 300 mm Gjdpfx Asg Icb Esiksbw max path length in z 240 mm Mains connection: 380 V 50 Hz Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 2003, condition: used, Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible. Gsdozuzz Aspfx Aikebw

Condition: used, Swiss-type cnc lathe TRAUB TNL 12/7 Gedpfx Aozxii Neikebw