Used Traub Tns for sale (90)

Condition: good (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center - TX8 D control - Complete technical data see photos - Year of manufacture 1994 Gtsdoyc Nnzspfx Afnsu - Hydrobar bar feeder - Various driven tool holders - Tool holders - Three-jaw chuck - Complete documentation Subject to errors and omissions.

Condition: used, Year of construction: 1987, Technical details: Gtedpou Ix N Sefx Afnou turning diameter over bed: 180 mm turning length: 490 mm swing diameter: 450 mm cross travel: Z-Weg: 168 mm control: Traub TX8D revolution per minute: 20 - 4000 U/min spindle passage: Ø 60 mm operating hours - idle run: 23.495 h tool turret: 12 tools total power requirement: 38 kW Weight approx.: 4,2 t dimension machine xH: 3,6 x 2,5 x 2,2 m Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device The Traub carries an integrated chip conveyor with an ejection height of 1,100mm (currently without function). Accessories: multiple small parts 8 x machine feet without tailstock i.D. *

Condition: used, Year of construction: 1990, turning diameter 250 mm turning length 450 mm control TX8D bore 80 mm spindle speed: 3150 U/min. Godst Hwq Depfx Afnotu CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Please ask for further details.

Condition: used, Year of construction: 1995, Traub Type TNC 42/65 DG CNC Lathe with Traub System TX8F Control,Twin Spindle with Collet Chucks, (2) x 10 Station Turrets, Swarf Conveyor. S/No. 251 (1995). Country of Origin: Germany Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Gtjdpsyfgmmsfx Afneu

Condition: used, Year of construction: 2006, operating hours: 37,000 h, functionality: fully functional, TRAUB TNX65 with bar feeder and accessories Year of manufacture: 2006 Operating hours: 37,000 h Control: TX8i Gtsdpfx Ajwm Igfjfnju - Two tool turrets resealed - High-pressure pump replaced - Machine fully functional - Geometry within manufacturer's tolerances Accessories: - 2x Hainbuch chucks - Various tool holders (see images) - Breuer bar feeder (1200 mm) - Number of spindles: 2 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001 [degrees] COUNTER SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 [kW] - Spindle speed: 7,000 [rpm] - Max. bar diameter: 42 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel: 700 [mm] LEFT UPPER TURRET - Number of positions: 10 - Number of motorized positions: 10 - X/Z travel: 175 / 650 [mm] - Y travel: +/- 40 [mm] - Tool type: VDI 30 - Driven tool speed: 6,000 [rpm] - Driven tool power: 5.5 [kW] RIGHT LOWER TURRET - Number of positions: 10 - Number of motorized positions : 10 - X/Z travel: 175 / 650 [mm] - Y travel: +/- 40 [mm] - Tool type: VDI 30 - Driven tool speed: 6,000 [rpm] - Driven tool power: 5.5 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive: 95 [kW] WEIGHT AND DIMENSIONS - Space requirement: 5,450 x 2,318 [mm] - Machine height: 2,258 [mm] - Machine weight: 10,000 [kg]

Condition: used, Year of construction: 1990, Technical details: turning diameter: 445 mm turning length: 2000 mm turning diameter over bed slide: 660 spindle bore: 65 mm Gedpfx Afow I R Ndonjtu spindle speeds:: 16 - 3150 U/min. rapid motion - x-axis: 10 mm/min rapid traverse Z-axis: 15 m/min total power requirement: 34 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 6 x 2,5 x 2,2 m with CNC Control TX 8 D C-axis driven tooling 14 station turret head 3 jaw chuck dia. 315 mm tailstock, steady as NC-axis diverse driven toolholders diverse turning toolholders chip conveyor and coolant attachment *

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t Gtjdpfxewp D Nbe Afnju dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: excellent (used), manufacturer: GRÜN SYSTEMTECHNIK WETZLER including case We offer an original ATC measuring microscope, originally taken from a TRAUB TNA turning center. The unit is designed for installation in the automatic tool changer and can be used on various CNC machines with a suitable toolholder interface (size comparable to TRAUB TNA400 Key Features & Benefits: • Universal application: Suitable for any CNC machine with compatible toolholder interface. • Fast tool setup: Enables direct measurement of cutting edges, tool lengths, and radii inside the machine. • Process reliability: Tool wear can be identified immediately and corrected without removing the tool. • Precise referencing: Useful for checking zero points, bores, and fixtures directly in the setup. • Time savings: Eliminates the need for external presetting devices and reduces downtime. • Compact & robust design: Easy to integrate and operate within the tool changer system. Gtodpfoykaxtsx Afnju This ATC measuring microscope turns your CNC machine into a precise measuring station, helping you achieve higher accuracy, shorter setup times, and improved process reliability.

Condition: used, Year of construction: 1996, max. bar material dia. 65 mm max. swing diameter 175 mm max. bar length 3.000 mm control System TX 8F Gedpfx Ajxbtq Nsfnetu travel -x axis 140 mm travel -z axis 520 mm CNC lathe | TRAUB - TNC 42/65 DG equipped with bar loader. The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DG

Condition: used, Year of construction: 1996, spindle passage 80 mm max. turning diameter 395 mm Max. Turning length 750 mm control System TX 8H max. Spindle speed 3.150 U/min. CNC lathe | TRAUB - TNA 400 Gtjdexbtqvspfx Afnou The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA400 | TNA-400

Condition: used, Year of construction: 2003, max. bar material dia. 65 mm max. bar length 3.000 mm control System TX 8H CNC lathe | TRAUB - TNC 42/65 equipped with bar loader . Gtsdpoxbtp Eefx Afnsu The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 | TNC 42/65

Condition: used, Year of construction: 1997, spindle passage 80 mm max. turning diameter 460 mm Max. Turning length 1.000 mm control System TX 8F max. Spindle speed 2.800 U/min. CNC lathe | TRAUB - TNA 500 Gtsdoxbtpxopfx Afnju The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA500 | TNA-500

Condition: excellent (used), CNC machine Traub TNL 26 Condition used, in good condition Gsdpfehlp Sdox Afnetu Sale to the exclusion of any warranty

Condition: good (used), Year of construction: 2003, operating hours: 18,538 h, functionality: fully functional, machine/vehicle number: 431, overall weight: 7,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 1,900 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i, TRAUB TNK 36 CNC Automatic Lathe - Operating voltage: 460 V - Frequency: 50 Hz - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper tool turret: - Number of tooling stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Position feedback resolution X/Y/Z: 0.0005/0.001/0.001 mm - Thrust force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Thrust force X/Z: 2,800/2,120 N - Position feedback resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Thrust force X/Z: 4,240/4,240 N - Position feedback resolution X/Z: 0.0005/0.001 mm - Including all tool holders shown in the photos, as well as a chip conveyor and coolant system by Resy, and a bar loader by FNB, model: TURBO 5-42. Gtjdpfx Afjyh Ivlsnju Attention: The item must be collected bindingly on a to-be-agreed appointment between 01 and 02 April 2026. FCA D-79115 Freiburg – loaded onto truck

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 344, overall weight: 7,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 1,900 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i, TRAUB TNK 36 CNC Automatic Lathe - Operating voltage: 460 V - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper turret: - Number of tooling stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Scale resolution X/Y/Z: 0.0005/0.001/0.001 mm - Input force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Input force X/Z: 2,800/2,120 N - Scale resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm Gsdoyh Hkzspfx Afnetu - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Input force X/Z: 4,240/4,240 N - Scale resolution X/Z: 0.0005/0.001 mm - Includes the tool holders shown in the photos, a chip conveyor and coolant system from manufacturer Resy, as well as a bar feeder from manufacturer FNB, type: TURBO 5-42 Note: The item must be collected by binding appointment between April 1st and 2nd, 2026, on a date to be mutually agreed upon. FCA D-79115 Freiburg – loaded onto truck

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 6060304, overall weight: 10,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 2,400 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i-S, TRAUB TNL 32/7 CNC Lathe - Operating voltage: 400 V - Rated current: 73 A Gedpfx Aeyh Hgcsfnstu - Maximum fuse: 63 A - Rated power: 46 kW - Frequency: 50 Hz - Main spindle, motor spindle including hollow clamping system - Max. bar capacity: 32 mm - For clamping device diameter: 49 mm - C-axis max. speed: 8000 rpm - Max. stroke: 305 mm - Upper turret X/Y/Z and H-axis: 10 tool stations with dual drive - Lower turret X/Y/Z and H-axis: 9 tool stations with total drive and separate sub-spindle drive - Sub-spindle including partial hollow clamping - Max. clamping diameter: LW 32 mm: C-axis, speed: max. 8000 rpm - Flushing unit mounted on the lower turret - Part length: max. 350 mm - Diameter: max. 32 mm - Incl. chip conveyor and coolant system from manufacturer RESY as well as a bar feeder from manufacturer FNB, type: TURBO 3-36 - Incl. all tools and tool holders shown in the photos Note: The item must be collected definitively between 01 and 02 April 2026 at an exact date to be agreed. FCA D-79115 Freiburg – loaded onto truck

Condition: not inspected (used), Year of construction: 1994, functionality: unexamined, Traub control, turret, tailstock, chip conveyor. Gtsdpjyh Drvofx Afneu

Condition: good (used), Year of construction: 1996, CNC turning center TRAUB Type:TNC65 DG Year 1996 Control TRAUB TX8F Godou Eug Ispfx Afnotu With lots of accessories.

Year of construction: 2005, condition: good (used), 7th piece-driven tool holder Suitable for CNC lathe TRAUB TNA 480 tool holder size VDI 40. Also fits SAUTER tool turrets with VDI 40 holder. Gsdpfx Afehwnfkonstu 7th piece Horizontal No.3/4/5/6/7/8/9/ for drilling and milling Price per piece 550,-€ 2nd piece Horizontal No.1 and No.2 for tapping Price per piece 600,-€ 1.NC - Drill chuck VDI 40 clamping range 1-13mm Price 100,-€ 1.NC - Drill chuck VDI 40 clamping range 2,5-16mm Price 150,-€

Condition: used, Year of construction: 2008, turning diameter 12,7 mm turning length 50 mm control Traub System TX 8i turning speeds 12000 U/min c-axis 0,001° gripping station 12,7 mm c-axis 0,001 ° speeds 12000 U/min rapid traverse 15 m/min turret (x-stations) 6 worktool system 5+3 worktool system 3 Werkzeugsysteme Gedpfxoygm R Ie Afnstu total power requirement 2,5/4 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,4 x 1,1 x 1,7 m CNC turning machine Traub TNL 12K with barloader LNS Tryton 112 Motor drive S8 (rear working with driven tools possible) Motor drive S7 (front working with driven tools possible)

Condition: excellent (used), Year of construction: 2012, ONLY 8,300 spindle hours! Control: TX 8 i-p MAIN SPINDLE Max. bar capacity: 32 mm Max. workpiece length - Swiss-type operation: 245 mm - Short turning operation: 125 mm Max. spindle speed: 6,400 rpm C-axis SUB SPINDLE Max. bar capacity: 32 mm Max. clamping depth of workpiece: 250 mm Max. spindle speed: 6,000 rpm C-axis UPPER TOOL TURRET Number of stations: 10 All driven Max. speed: 12,000 rpm LOWER TOOL TURRET Number of stations: 9 All driven Max. speed: 12,000 rpm BACK WORKING UNIT Number of stations: 8 Driven stations: 3 (T12, 13 and 14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm Parts conveyor Gtsdpfx Aoxrf Etsfnou Chip conveyor Coolant pump 20 bar IFS oil mist filter Bar loader FMB turbo 3-36

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, TX8i control, spindle bore 65 mm, two turrets, turret 1 with Y-axis, turret 2 with steady rest, sub-spindle, chip conveyor, short bar loader. Gjdpfx Afeyghmqenstu

Condition: used, Year of construction: 1988, Technical details: turning diameter over bed: 360 mm turning dia. over face-slide: 160 mm turning length: 800 mm longitudinal traverse (z-axis): 810 mm facing movement (x-axis): 205 mm control: TX-8 spindle passage: 60 mm revolution per minute: 63 - 3150 / 2 step U/min feed:: 10.000 mm/min. tool turret - number of stations: 8 operating hours - idle run: 8834 h tailstock taper ISO: SK30 DIN 2080 tailstock quill stroke: 105 mm operating pressure: 40 bar total power requirement: 38 kW Weight approx.: 3,1 t Gtedpfx Aou Rqabjfnou dimension machine xH: 1,8 x 3,3 x 1,8 m dimensions of hydaulic: 580 x 400 x 750 mm Equipment: Lathe chuck Ø 200 mm, hydraulic Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system control panel Accessories Fine adjustment device for tool set-up *

Year of construction: 1986, condition: ready for operation (used), Turning diameter over bed/face slide: 360mm/160mm, center distance: 800mm, travel X/Z: 205mm/810mm, speed: 3150rpm, spindle bore: 60mm, tool positions: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3300mm/1800mm/1800mm, weight: approx. 3300kg, control: Traub System TX-8. An on-site inspection is possible. Godpewmqx Defx Afnstu

Year of construction: 1996, condition: ready for operation (used), Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible. Gsdpfxev Scrhe Afnjtu