Used Thermal Oil Furnace for sale (7,722)

Condition: repair required (used), Year of construction: 2003, Nabertherm HT 64/16 – High-Temperature Furnace For sale: Nabertherm HT 64/16 high-temperature furnace. The device is electrically operational. The furnace starts correctly, and the control system works properly. Currently, the heating elements need replacement. This model is designed for high-temperature applications and is frequently used in laboratories, the ceramics industry, and for processing specialist materials. Hedsy N S N Aspfx Aagjnl The visual condition is as shown in the photos. Sale in current condition. EU-wide transport can be arranged.

Year of construction: 2019, condition: used, We are offering this used German Kiln Technology HERDWAGENOFEN car kiln, year of manufacture 2019. Reference number: 118004 Year of manufacture: 2019 Operating voltage: 3 × 400 V Current: 64 A Frequency: 50 Hz Fuel: natural gas Hnedpfxoycvxme Aagol Calorific value: 10.3 kWh/Nm³ Thermal output: 1650 kW Gas operating pressure: 8 kPa Air operating pressure: 10 kPa Air preheating: 550 °C Kiln temperature: 1500 °C TNV temperature: 930 °C Usable volume: 4.3 m³ If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 2009, power: 2,000 kW (2,719.24 HP), input voltage: 380 V, Operated with gas, 16 x impulse burners Hnjdpfxeyr Sa Se Aagsl max. batch weight: 50t usable furnace dimensions: 6m x 3m x 2m must be dismantled and collected 450 to 1050 degrees process controller SE 504

Condition: used, Rotary vane vacuum pump Manufacturer: Leybold Type: SV 630 B and BF Hnodpfedf Il Dsx Aagel Cat. No.: 960863 & 960867 Voltage: 50/60Hz 400V Ultimate pressure: 0,8 hpa(mbar) Status: Refurbished Warranty: 12 months Included: engine re-storage, repainting, electric check Delivery time: ex stock

Condition: good (used), Rotary vane vacuum pump oil lubricated Manufacturer: DVP Type: LB. 4 Warranty: 12 months Status: Refurbished Motor: 230V Suction power: 4m³/h Ultimate pressure: 2mbar (abs.) = 99.8% vacuum Hnsdpjb Erqbofx Aagel Accessories: Operating instructions

Condition: as good as new (ex-display), vacuum drying oven Inside: 700 x 700 x 600mm deep Heating capacity: 3 KW Temperature range 1-120°C Outer dimensions: 1280 x 950 x 1280 Pressure range: Atmosphere - 0 Bar (Not suitable for overpressure) A suitable vacuum pump is provided depending on the application. Hnjdofbl T Nepfx Aagjl Supply line: 3ph , N, PE 400V, 50Hz CEE plug The interior installation can of course be completely removed!

Condition: excellent (used), REF: MM5767 1 x Adpak Machinery Systems Ltd stainless steel flow wrapper fitted with an ICE Zodiac Hawk thermal transfer printer and a fixed folding box. Hodpjulc Sqefx Aagenl Model - GSP 65. Date of manufacture - 2009 approx, refurbished by Midas Motion in 2020. Sealing jaws - 300mm long. Fixed folding box - 40mm wide. Came out of production in 2023, this unit was previously used to individually wrap ice lollies.

Condition: like new (used), temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 process control controller: yes weight: 700 kg voltage: 400 V 3/N current consumption: 63 A PLC: Siemens S7 control cabinet: brand new - With an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - Controllable cooling housing with autom. valve Hnjdpfx Aasyxnk Uegjl - Automatic exhaust damper - Automatic exhaust flap - Monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor.

Condition: used, Gas heated double chamber furnace type: KA_GB 10.14.14/d heating: natural gas usable dimensions per chamber width: 1.000 mm height: 1.400 mm depth: 1.400 mm max. temperature: 550°C working temperature: 250 – 550°C uniformity: ±5 K total connected load: 15 kVA hot gas circulator power: 2 x 5,5 kW (1470 min-1) combustion air blower power: 1 x 1.5 kW (5520 rpm at 95 Hz) burner output: 2 x 100 kW (expandable to max. 2 x 150 kW) Hnsdpjdyvipefx Aagel number of control groups: 2

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 weight: 700 kg voltage: 400 V 3/N current consumption: 63 A PLC: Siemens S7 control cabinet: brand new Hjdpfjmfn Rujx Aagenl - with an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new.

Condition: excellent (used), Viessmann Vitoplex/105kw low-temperature boiler with oil burner Hnsdpfxowauaxo Aagol

Condition: excellent (used), Viessmann Vitoplex heating boiler 150 kW (0069) oil burner Hnsdpfsx Htirox Aagsl

Condition: ready for operation (used), Oil mist extractor, emulsion mist separator, GTI GT40L, Used machine Manufacturer: GTI Glob Tec Model: GT 40L Dimensions: 1374 x 857 x 2283 mm Weight: 400 kg Airflow rate: 4000 m³/h Hnodpfoy Ezbaex Aagol Electrical power: 3.7 kW Max. 400 V; 50 Hz Total filter surface: 38.9 / 108 m²

Condition: used, Oil mist extractor, emulsion mist separator, GTI GT40L, Used machine Manufacturer: GTI Glob Tec Model: GT 40L Overall dimensions: Width: 857 mm Depth: 1319 mm Hodey Ezapopfx Aagonl Height: 2287 mm Weight: 400 kg Year of manufacture: 2020 Airflow rate: 4000 m³/h Electrical power: 400V; 3.7 kW Total filter surface area: 38.9 / 108 m² Number of filter cartridges: 4 + 2 HEPA Filter types: FilterStufe2 L1020/300/2 – 4 pcs HEPA LH 1020/1 – 2 pcs

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 20100449, functionality: fully functional, input voltage: 230 V, type of input current: three-phase, volume flow: 2,000 m³/h, overall weight: 95 kg, empty load weight: 95 kg, cooling capacity: 1.5 kW (2.04 HP), Used Absolent ODF 2000 industrial oil mist collector for sale. The unit is designed for CNC machines and automatic lathes to extract oil mist and improve air quality in industrial environments. Manufacturer: Absolent AB (Sweden) Model: ODF 2000 Part No.: 11002050 Technical data: Hedsy Nlzxopfx Aagenl Voltage: 400 V Frequency: 50 Hz Power: 2.2 kW Rated current: 4.53 A Power factor: 0.84 Used in production environment. Additional photos and running video available on request. Location: Poland

Condition: used, Large Gas-Fired Furnaces for Sale: 7500 long x 2780 wide x 2000 height. Hedpovitnhefx Aagonl These are Internal - bed sizes Gas fired Eurotherm Control 4102. Will heat up steel to 1000 degrees C plus. Both installed and working order. Spares available including a controller and thermocouples.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, working width 430mm max height 100mm Hjdpey N N Sbsfx Aagjnl outfeed conveyor 3500mm variable regulated brushes speed variable regulated rolls speed year 2011

Year of construction: 2008, condition: used, functionality: fully functional, Unit was used for grinding oil cleaning for carbide machining. Eckert cooling unit 3 filter towers with sludge bag Filter capacity 80-100 l/min. Filter fineness 3-5 µm Hnjdpfolczcwex Aagel In the description the unit is described with sludge drum, technical data are similar. Original instructions available in paper form Videos available on request.

Condition: excellent (used), Despatch LCC2-14NV-3 Hodpfx Aaeyvlauogenl Year of manufacture: approx. 2018 Max. temperature: 260 °C / 500 °F Power: 415V - 1PH - 50 Hz Full Load Amps: 25.2 AMPS S.C.C.R: 5 kA Heater: 16 kW / 22.3 AMPS Largest Motor Amps: 2.1 AMPS Total Motor Amps: 3.2 AMPS

Condition: as good as new (ex-display), Year of construction: 2011, Used storage tank made of steel according to EN 12285-1 (with test certificate) double-walled, for underground storage of fuel oil and diesel fuels, 1 dome (alternatively 2 domes possible). Capacity: 100,000 liters diameter: 2.900 mm length: approx. 15.750 mm Weight: approx. 18,800 kg In addition, we can also equip our tanks with the following accessories: - Leakage monitoring with under- and overpressure leak detector - Dome shaft with shaft cover in walkable or traversable drive-over design - Partition walls (as multi-chamber tank) - Interior coatings (e.g. 2-component epoxy resin), partial or full linings - Content and level measuring devices as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or gasoline - Dispensers for diesel, biodiesel and gasoline - with complete tank data acquisition on request Hnodpfxoi Enxdj Aagol - External tank insulation with PU foam Tank is cleaned inside and outside coating is overhauled and checked with 14 kV. A cost-effective delivery with our own truck is possible. Just tell us the delivery place, you will get the exact freight cost immediately. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters.

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure Hodpfx Aaovm Uwxegonl - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 40,000 liters Diameter: 2,500 mm Length: approx. 8,700 mm Weight: approx. 7,200 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need further information, just call us or send us an email. Trade-in and purchase of Tanks/containers are possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 60,000 liters Diameter: 2,500 mm Length: approx. 12,650 mm Weight: approx. 9,950 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including an operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need any further information, just call us or send us an email. Trade-in and purchase of tanks/containers is possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Hedpfovm Uxisx Aagjnl Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate) double-walled, for above ground storage, with saddle feet, 1 dome, optical leakage warning device, limit value transmitter and complete tank fitting consisting of: - Filling pipe 3" with TW-lock - dipstick pipe 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hour) - 1 vent pipe 2" with vent cap. Tank is equipped with the above fittings at the factory and is cleaned on the inside. Capacity: 50.000 liters diameter: 2.500 mm length: approx. 10.800 mm Weight: approx. 8.800 kg The tank can be repainted in the RAL color of your choice and optionally equipped with a ladder incl. operating platform. A cost-effective delivery with our own truck is possible. Just let us know the place of delivery and you will immediately receive the exact freight costs. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us for this. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters. Tank and apparatus Barth Ltd. Werner-von-Siemens-Str. 36 Hjdpfohvmiwsx Aagjnl 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate) double-walled, for above ground storage, with saddle feet, 1 dome, optical leakage warning device, limit value transmitter and complete tank fitting consisting of: - Filling pipe 3" with TW-lock - dipstick pipe 1" with dipstick - Suction combination suction pipe (1 1/2" or 2") Hsdpfx Aasguzhcsgsnl - 1 vent pipe 2" with vent cap Tank is factory equipped with the above fittings and is cleaned inside. Capacity: 100.000 liters diameter: 2.900 mm length: approx. 15.750 mm Weight: approx. 18.800 kg The tank can be repainted in the RAL color of your choice and optionally equipped with a ladder incl. operating platform. A cost-effective delivery with our own truck is possible. Just let us know the place of delivery and you will immediately receive the exact freight costs. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us for this. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters. Tank and apparatus Barth Ltd. Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 30,000 liters Diameter: 2,000 mm Length: approx. 9,9400 mm Weight: approx. 5,200 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including an operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need any further information, just call us or send us an email. Trade-in and purchase of tanks/containers is possible, just contact us. Hnjdpjvm Uvnofx Aagsl Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst