Used Thermal Oil Furnace for sale (8,358)

Condition: used, Year of construction: 2018, Manufacturer: EISENMANN, Type: 2860, Year of construction: 2018, Serial No. 81-231-F01, Heating medium: natural gas, Heating value: 10 kWh/Nm³, Exhaust gas volume: 35,000 Nm³/h, Reaction temperature: 730 °C, Burner heating capacity: 4,250 kW, Control system, Total boiler length: approx. 15 m. Fpjdpfx Aisy Ua Evsvsn

Condition: excellent (used), Max. operating temperature: 300°C Fpsdoy Uwr Hopfx Aiven Internal dimensions (W x H x D): 400 x 380 x 370 mm Internal volume: 57 liters Power consumption: 1.4 kW Electrical connection: 230 V Footprint: 750 x 610 x 550 mm Approximate weight: 50 kg

Condition: used, Manufacturer: HERAEUS Model: RL 250 Internal dimensions: Diameter: 315 mm Depth: 450 mm Fjdpfx Aoy Nlcveivspn

Condition: good (used), Internal item no.: 25121 Hardening furnace Nolzen WL 20 / 19 / 40 Max. temperature: 1150°C Fpjdpfx Aeyxpdcoiven Power: 8KW Connection: 380V Internal chamber dimensions: W 20 / H 19 / D 40 cm Dimensions (LxWxH): 60 x 76 x 84 cm Weight: approx. 200 kg

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Fpsdjv Si Szopfx Aivon Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total width: 2,350 mm, total length: 6,000 mm, inner dimension length: 3,000 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Oven dimensions: 3,000 x 1,600 mm MACHINE DETAILS External dimensions (L x W): 6,000 x 2,350 mm Firing: Gas Orientation: Vertical, for use with vacuum bags; connection to vacuum port inside oven EQUIPMENT 2 x trolleys included Fjdpfx Aexur Ndoivjpn The following data is from a general offer; the seller accepts no liability for its accuracy. This also applies to the data sheet in the appendix. Electrical Voltage: 400 V Current: 16 A Frequency: 50 Hz Gas Type: Natural gas / Propane / LPG Connection: 1"1/4 Gas pressure: 20–60 mbar Propane/LPG consumption (4 burners): 8 kg Propane/LPG consumption (8 burners): 16 kg Natural gas consumption (4 burners): 9.6 m³ Natural gas consumption (8 burners): 19.2 m³ Temperature range (4 burners): 40–150 °C Temperature range (8 burners): 40–320 °C Power output (4 burners): 96 kW Power output (8 burners): 192 kW

Condition: good (used), approx. 7 pieces Sato printer CG408DT-LAN thermal printer with LAN connection | label printer - used - : Price per piece from location: only €85 (net)! Manufacturer: Toshiba Fpsdpfovx E Rasx Aiven Type: CG408DT-LAN Year of manufacture: unknown Sato printer CG408DT-LAN - label printer with LAN connection Sato printer CG408DT-LAN, a reliable thermal printer for professional labeling in various areas of application such as warehouse, logistics or office. The LAN connection means the printer can be easily integrated into the network, which ensures flexible use. Product details: • Model: Sato CG408DT-LAN • Print technology: Thermal printing (direct thermal printing) • Print resolution: 203 dpi • Print speed: Up to 152 mm/s • Media width: 25 mm to 112 mm • Connection: LAN connection (network capable) • Areas of application: Label printing for logistics, shipping, warehouse, retail The printer is in perfect condition and offers high print quality with fast turnaround times. Ideal for a variety of label formats. Condition: good Available: immediately Location: Braunschweig

Condition: ready for operation (used), Kodak Thermal Imaging Head Part-Number R507-00134A • 50W 630nm • 10mW 680nm Fodpfjiy Nx Aox Aivopn

Condition: new, Electrically heated conveyor furnace Fodsgvmg Hjpfx Aivspn

Year of construction: 2015, condition: used, external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm mesh belt: 480 mm width clear height 140 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz Fsdpfx Aeclupdjivepn power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

Condition: new, High temperature chamber furnace, make VEI max. temperature: 1.200°C useable dimensions (w x h x d): 2750 x 500 x 1.100 mm heating power: electrically, 42 kW Fsdpfxsdyvkye Aivopn

Year of construction: 2015, condition: new, Vertical furnace height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm Fpedpfx Aijcdi D Djvsn electrically heated: 40 kW circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz temperature: max. 750°C

Condition: new, # suitable for treatment under inert gas Fpodjcdi R Eepfx Aivjn # with rapid cooling by fan external dimensions (w x h x d): 1500 x 1600 x 2500 mm useable dimensions (w x h x d): 750 x 600 x 1100 mm temperature: 1200°C electrical heated: approx.. 42 kW charge weight: 700 kg

Year of construction: 1999, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Management Act Dear Sir or Madam, We offer a 10,000-liter double-walled storage tank for diesel storage, as follows: Nominal capacity 10 cbm. Quantity: 1 unit. Used, but fully overhauled, meaning the container has been cleaned, refurbished, primed, and painted. Fpsdpfxjc Nkw Is Aivjn Color: RAL paint. However, you can also specify your own color preferences at any time. Material: Steel in steel, material S235JRG2. Documents: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and type plate. All our tank systems can also be offered without a diesel pump. Also on offer: Liquid fertilizer - AHL tank systems in sizes from 10,000 to 100,000 liters. Of course, you can also participate in the design of your tank system! All our systems are thoroughly inspected and checked by selected employees in our company. Upon request, we also offer cost-effective delivery. You can inspect our systems at any time. Further tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Price/Shipping: The price for the tank system applies ex works Warstein, free on truck. Delivery can be offered at a reasonable additional cost. Delivery time: immediately. You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and can, as a certified specialist company according to the Water Management Act (WHG), professionally empty, clean, dismantle, and transport them. Sincerely, From Warstein Tank & Environmental Protection Wozniack

Year of construction: 2023, condition: new, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Management Act Dear Sir or Madam, we offer a 50,000-liter double-walled storage tank for the storage of heating oil. EN 12285-2 standard. Delivery time: immediately. Nominal capacity: 50 cubic meters, new. Color: Painted RAL 7035. Material: Steel in steel, material S235JRG2. Documents: Manufacturer's certificate / Type plate. Quantity: 1 dipstick. Quantity: 1 vent pipe. Quantity: 1 filling nozzle. Quantity: 1 new level sensor. Quantity: 1 new leak detection device. Quantity: 1 ladder. Quantity: 1 suction line. Container dimensions: approx. 10,900 mm. Diameter: approx. 2,500 mm. Weight: approx. 9,000 kg. Storage: Above ground. Delivery time: immediately. Sincerely, from Warstein Fpjdpek Dprujfx Aivon Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 2023, condition: new, Tank & Environmental Protection Wozniack – Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 10,000-liter double-walled storage tank for storing heating oil. EN 12285-2 standard. Nominal capacity: 10 cubic meters, new. EN 12285-2 standard. Color: Painted RAL 7035 Material: Steel, steel S235JRG2 Documents: Manufacturer’s certificate / Type plate 1 dipstick 1 vent pipe 1 fill pipe 1 new level sensor 1 new leak detection device 1 ladder 1 suction line Container dimensions: approx. 5,300 mm Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Fodpfx Aek Dpv Aeivspn Storage: Above ground Delivery time: September Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 2022, condition: new, Tank & Environmental Protection Wozniack – Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 50,000-liter double-walled storage tank for the storage of heating oil. Nominal capacity: 50 cubic meters, new Color: Painted RAL 7035 Material: Steel in steel, material S235JRG2 Documents: Manufacturer's certificate/type plate 1 dipstick 1 vent connection 1 fill connection 1 new limit value sensor 1 new leak detection device 1 ladder 1 suction line Tank dimensions: approx. 10,900 mm Diameter: approx. 2,500 mm Weight: approx. 9,000 kg Storage: Above ground Delivery time: September Sincerely, From Warstein Fodpfx Aoh Ukuloivjpn Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Condition: new, Year of construction: 2023, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Management Act Dear Sir or Madam, We offer a 50,000-liter double-walled storage tank for the storage of heating oil / diesel / HVO100. Color: RAL 7035 Material: Steel, grade S235JRG2 Documents: Manufacturer’s certificate / type plate according to EN 12285-2, Ü marking Tank suitable for above-ground installation outside earthquake / flood zones. Equipment/fittings: Manway 600 mm with manway cover, screws, and gasket 1.1 Equipment/fittings: Manway 500 mm with manway cover and gasket 1 -Filling pipe 2” with TW closure (filling cap) (from 20 m³ = 3”) -Suction pipe 1 ¼” -Dipstick and dipstick closure - Tank content indicator -Vent pipe with cap 1 ½” -Limit switch with type approval -Leak detection device (optical) = LAS with leak detection fluid -Access ladder with platform for side mounting, supplied separately Sincerely, from Warstein Tank- und Umweltschutz Wozniack Enkerbruch 2 Fodpeh Ukupefx Aivjpn 59581 Warstein

Condition: new, El. heated chamber furnace, make VEI type: KO_EB recirculation: horizontal airflow max. furnace temperature : 650°C internal dimensions (w x h x t): 800 x 800 x 1000 mm heating power: 51 kW fan power: 5,5 kW Fodpfx Aoipvgioivepn connected load: 61 kVA

Condition: new, Electrically heated continuous furnace, make VEI-Engineering type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C Fedpsd Sg Hhsfx Aivopn working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm heating power: 2 x 30 kW fans: 2 x 5,5 kW Cooling water for 2 heat exchangers: inlet max. 2 bar PLC: Siemens S7

Condition: used, Lubrication pump, oil pump for central lubrication, REICHERT lubrication unit Central lubrication pump, oil pump for central lubrication, hydraulic pump Oil central lubrication pump, hydraulic power unit Year of manufacture: approx. 1990 Fsdjxrgucepfx Aivepn Operating pressure: 30 bar Flow rate: 2.75 liters/min Motor power: 0.25 kW Tank capacity: 44 liters - 1 piece of hydraulic pump REICHERT, type PA1 / 1.6 U - 1 piece of pressure gauge 40 bar Space required (L x W x H): 660 x 350 x 650 mm Weight: 46 kg Good condition Sold without oil contents

Condition: new, working temperature: 600°C max. allowed furnace chamber temperature: 750°C cennected load (el.): 2,5 kVA gas pressure: 60 mbar gas type: natural gas Fpodpocf U S Sofx Aivon heating power: 130 kW (max. 150 kW) external dimensions (approx.) (w x h x d): 2000 x 3530 x 2500 mm useable dimensions (w x h x d): 1100 x 1330 x 1500 mm

Condition: new, Year of construction: 2024, machine/vehicle number: 5.3495.0, Kaeser Oil/water separator Type: Aquamat CF 6 Fpodpfx Aisv Ta D Devon Tested and certified condensate treatment The AQUAMAT treatment system enables the compressor operator to carry out condensate treatment in-house, thereby greatly reducing the amount remaining for disposal. An AQUAMAT can save approximately 90% of the costs associated with arranging for the full volume of condensate to be treated and disposed of by a specialist contractor, therefore the initial investment is very quickly recovered. Technical data Suitable for max. compressor delivery volume 3.8 m³/min (using: Sigma Fluid MOL or S 460; for Kaeser rotary screw compressors in climate zone 2*) Receiver volume 18.6 l Fill volume 11.7 l Condensate inlet connection 2 x G 1/2 Water drainage connection (hose diameter) DN 10 Net weight approx. 5.8 kg Permissible condensate temperature +5 to +60 °C Dimensions (W x D x H) 387 x 254 x 595 mm Specifications subject to change without notice. Factors such as compressor type and oil type must be taken into consideration when selecting AQUAMAT condensate treatment systems.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, type plate available, Oil-Free Screw Compressor RENNER RSF 250 D – 250 kW – 45,000 l/min – Year 2015 Technical Specifications • Manufacturer: RENNER Kompressoren • Model: RSF 250 D Fpedpfozm Nhnjx Aivon • Year of manufacture: 2015 • Serial number: 545073 • Motor power: 250 kW • Air flow rate: 45,000 l/min (45 m³/min) • Working pressure: 7.5 bar • Maximum permissible pressure: 13 bar • Soundproofed enclosure • Electronic control with digital display • Fully automatic operation • Industrial design for continuous service

Condition: good (used), Max. External Dimensions: Diameter: 580 mm Height: 1160 mm Weight: approx. 50 kg Fpodpfx Aezqc E Uoivjn Condition: good, second-hand