Used Tester for sale (192)

Condition: used, Chroma Type: ATE 17020 The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification. Particularly strong in: - Lifetime testing, BMS verification, and validation of complex charging cycles - High energy recovery – up to 85% efficiency - Flexible expansion through numerous channels or higher current ranges - Enterprise deployment with extensive safety features & data persistence Technical data – Chroma ATE 17020 PTS Dedpfx Afewwrxaonekh Feature Specification Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge test) Channel output: 600 W to 60 kW (modular and scalable) Total output: Up to 600 kW (depending on configuration) Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher current up to 2,600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Transition time (charge/discharge): < 50 ms Sampling rate (measured data): up to 50 kHz (with BatteryPro) Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recuperation Temperature monitoring: Optionally integrable, range 0–90°C ±2°C Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg) Mains connection: 3-phase, 400 V AC (depending on model) Applications: E-mobility, battery development, quality assurance, cell research Weight: approx. 455 kg Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), Professional ATEQ F620 leak and pressure tester, designed for quality control and production testing. The device enables precise pressure-based (air) leak testing, ideal for applications in automation, pneumatics, automotive, and serial production. Very good technical condition – the device powers up correctly and is ready for use. Current calibration/service: 16.04.2024 (ATEQ) – visible on seals and labels. Features and equipment: • clear LCD display • automatic ZERO function • test programs • communication ports (RS232 / MODBUS / PROFIBUS – depending on configuration) • analog and digital outputs • integrated pneumatic system with filter • robust industrial housing • 230 V power supply Laboratory and production-grade equipment – this is not workshop or amateur equipment. Dksdpfxsyc H T Ij Afnsh

Condition: used, This listing is for the Palltronic Flowstar 1V The unit is in full working condition and is ready for immediate use Palltronic Flowstar IV Filter Integrity Testing Instrument (and variants like Pall FFS04 S Palltronic Flowstar IV Filter Integrity Test Instrument / Pall Flowstar IV FFS04 Filter Integrity Tester) are precision filter integrity test instruments designed to check whether sterilising-grade membrane filters and associated assemblies have defects (like leaks or incomplete retention) before they are used in critical processes — particularly in pharmaceutical manufacturing and biotech Typical Uses These instruments are most commonly used in environments where sterility is critical: Dkodoyfhdmepfx Afneh Final filtration before sterile drug product filling. Leak testing of single-use assemblies and filter housings. Quality control in vaccine production, biologics manufacturing, and related biotech workflows.

Condition: used, This listing is for The Palltronic Flowstar XC The unit is in full working condition and is ready for immediate use Dkjdpfx Asydqf Defnjh The Palltronic Flowstar XC is a filter integrity testing instrument used mainly in biopharmaceutical, lab, and industrial filtration environments. It’s part of the Flowstar family of integrity testers designed to assess the performance and integrity of filters by directly measuring flow, which helps ensure that filtration systems are operating correctly and safely

Condition: excellent (used), Pharmatron 5Y tablet tester The hardness tester is ideal for measuring the breaking of tablets. Cycle time 25 tablets / 3mins, up to 33mm tablet diameter, 1Ph Djdjiy Nm Rjpfx Afnskh

Condition: used, Year of construction: 2007, voltage 400 V current capacity 800 VA frequency 50 Hz weight of the machine ca. ca. 355 kg In our opinion, the machine is in good used condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Dodpfx Ajxwdxcjfnekh Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: TGL, pressure tester Dodeycczujpfx Afnskh -Pressure range: 0 to 25 bar -Case dimensions: 330/200/H140 mm -Weight: 3.6 kg

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: Hydrotechnik Limburg, pressure tester -Pressure range: 2x 0 to 10 bar -Dimensions: 260/150/H205 mm Dksdpfeyccvfsx Afnsh -Weight: 3.2 kg

Condition: used, Adixen / Alcatel Alcatel ASM 122D Helium Leak Detector – mobile For sale is a professional Adixen / Alcatel ASM 122D helium leak detector from industrial use. This device is designed for highly precise leak detection and leak testing with helium and is used in industrial settings, research, and laboratories. It allows for the detection of extremely small leaks in vacuum systems, pipelines, valves, vessels, and assemblies. The leak detector features an integrated forepump and turbomolecular pump, various operating modes (vacuum / sniffer), as well as a digital display with automatic functions. Technical data (excerpt): Manufacturer: ALCATEL Model: ASM 122D Measurement principle: Helium mass spectrometer Detection limit: up to approx. 1 × 10⁻¹² mbar·l/s Power supply: 200–240 V / 50–60 Hz Power consumption: approx. 800–1200 W Dedpjyapwkofx Afnskh Made in France Weight: approx. 100 kg Condition: used Scope of delivery: (see picture) (Specifications and information subject to change and error!) If you have any further questions, please feel free to contact us by phone.

Condition: used, Adixen Dksdjyankiopfx Afnjh Adixen ASM 142 Helium Leak Detector Description: For sale is an Adixen ASM 142 helium leak detector. This device is suitable for highly precise leak detection in vacuum and pressurized systems and is used professionally in industry, laboratories, and research. The ASM 142 is equipped with an integrated turbomolecular pump, various measurement and test modes, as well as a clear digital display of the leak rate. Thanks to its sniffer mode and automatic test cycles, the device offers flexible application possibilities. Highlights: - Very high measurement accuracy - Vacuum and sniffer operation - Graphical & acoustic leak indication - Robust industrial design on casters Technical Data: Test gas: Helium Dimensions: approx. 110 × 60 × 70 cm Detection limit: down to approx. 5 × 10⁻¹² mbar·l/s Power supply: 230 V / 50–60 Hz Power consumption: approx. 1000 W Weight: approx. 100 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and possible errors!) For further questions, please feel free to contact us by phone.

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm Dksdpfou N Avxex Afnjh workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: excellent (used), Impact hardness tester Type according to Professor Baumann Type: No.523 Dedpfxjd R Rhwo Afnekh Operating instructions available Box has the dimensions : L.380 x W.220 x H. 95 mm Weight 5.5, kg

Condition: excellent (used), KARG KARG Industrietechnik MeltFlow on – MFI/MVR Melt Flow Index Tester For sale is a MeltFlow on melt flow index tester (MFI/MVR) from KARG Industrietechnik, Made in Germany. The unit was used in plastics quality assurance and is in very good, well-maintained condition. Ideal for laboratories, quality assurance, development, and production in plastics processing. Technical data: Manufacturer: KARG Industrietechnik Model: MeltFlow on Code: 3200.000 Rated power: 1.6 kW Rated current: 7 A Voltage: 230 V / 50 Hz CE marking: yes Features & scope of delivery: - MeltFlow on tester - Set of weights: - 5.000 kg - 2.160 kg Dkedjx Trg Nspfx Afnsh - 1.200 g - 5.000 g - Piston / plunger - Cleaning tool - Software CD: K-BASE software program V4.1 SP0 Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and details are subject to changes and errors!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), functionality: fully functional, A Bareiss digital hardness tester in good, used condition is for sale, as shown in the pictures. Technical data: • Manufacturer: Bareiss Prüfgerätebau GmbH • Model: Digi-Test II • Hardness testing method: Shore A - D - IRHD M • The modular digi test II offers you maximum flexibility in hardness testing of elastomers, polymers, soft elastic materials, composite materials, and foams. In just a few simple steps and without tools, the numerous measuring devices can be exchanged according to Shore, VLRH, or IRHD, allowing you to quickly switch between different measuring methods. The hardness measurements are fully automatic, reducing user influence to a minimum. A connected electronic unit recognizes the selected measuring device, automatically switches to the appropriate measuring method, and guides you through the test sequence via the user-friendly menu. • With many accessories, operating instructions, drivers • Condition: Used, functional Insured shipping costs: €30 You will receive an invoice with VAT shown separately. Dkedpfxsyfmm Ts Afnsh Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale. Storage location: Shelf 1

Condition: used, This listing is for a Sartorius Sartocheck 3 Plus Filter Integrity Tester. The unit is in full working condition and is ready for immediate release. Dksdpfexxyarox Afnjh The Sartorius Sartocheck 3 Plus Filter Integrity Tester is an advanced instrument designed for the precise testing of membrane filter systems, making it essential for biochemistry and pharmaceutical applications. Here’s a detailed breakdown of its features and specifications: Key Features: Microprocessor Control: Offers programmable protocols for testing filter systems, allowing users to store up to 60 programs directly and expand to 240 with a memory card. Integrity Testing: Designed to ensure the integrity of membrane filters, minimizing the risk of using defective cartridges. Comprehensive Testing Protocols: Includes a variety of tests such as: - Diffusion Test - Bubble Point Test - Combined Diffusion and Bubble Point Test - Water Intrusion Test - Water Flow Test - Pressure Drop Test - Multipoint Diffusion Test - Data Reporting: Generates complete paper reports to meet cGMP requirements, detailing: - Test parameters (pressure, time) - Results (net volume, pressure drop, evaluations) - Filter cartridges used and products tested - User-Friendly Cleaning Protocol: Provides on-screen instructions for cleaning, compatible with any cleaning reagent due to its stainless steel construction. Manufacturer Specifications: Power Requirements:Operating Voltage: 100-240 V ±10% Phases: 1 Ph/N Grounding Conductor: Separate SL (yellow-green) Frequency: 47-63 Hz Protection Rating: IP 44, indicating resistance to dust and splashing water. Pressure Specifications: Maximum Operating Pressure: 10 bar g Operating Pressure: Minimum 4 bar g Internal Limit Pressure: 10 bar g Maximum Power Input: 74 Watts Installation: Must adhere to VDE regulations.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 51720166-1, overall weight: 400 kg, Zeltwanger Leak Testing System F56BEV – Year of Manufacture 2018 For sale is an automated leak testing system from the renowned manufacturer Zeltwanger. The F56BEV system is designed for precise and reproducible leak and tightness testing in industrial production environments, making it ideal for both serial and random-sample inspections. Technical Data: Manufacturer: Zeltwanger Type / Model: Leak Testing System F56BEV Project No.: 51720166 Machine Number: 51720166-1 Year of Manufacture: 2018 CE Marking: Present Dkjdpfx Afoydl Dnonoh Electrical Data: Connection: 230 V / 1~ / 50 Hz Max. Fuse Protection: 16 A Max. Power Consumption: 10 A Power Input: 0.5 kW Supply Line: 3 × 1.5 mm² Control Voltage: 24 V DC Mechanical / Pneumatic Data: Machine Weight: approx. 400 kg Pneumatic Supply: min. 5 bar (oil-free compressed air) Advantages & Features: High-precision leak and tightness testing Robust industrial-grade design Low energy consumption Compact construction Easy integration into existing production lines Proven Zeltwanger quality Typical Applications: Automotive industry & suppliers Plastics and metal processing Medical technology Industrial and special machinery construction Quality assurance / end-of-line testing

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 51720166-2, Zeltwanger Leak Testing System F56BEV – Year of Manufacture 2018 For sale is a high-quality leak testing machine from the renowned manufacturer Zeltwanger, known for precise and reliable testing and automation solutions in industrial applications. The F56BEV system is ideally suited for automated leak testing of components and assemblies, impressing with its compact design, easy integration, and robust industrial construction. Technical data: System designation: Leak testing F56BEV Project No.: 51720166 Machine No.: 51720166-2 Year of manufacture: 2018 CE marking: available Electrical data: Supply voltage: 230 V / 1~ / 50 Hz Max. fuse rating: 16 A I-Max: 10 A Power consumption: 0.5 kW Supply cable: 3 × 1.5 mm² Control voltage: 24 VDC Mechanical / Pneumatic data: Machine weight: approx. 400 kg Pneumatic supply: min. 5 bar (oil-free compressed air) Highlights: - Proven Zeltwanger quality - Ideal for series and single-part testing - Robust industrial construction - Low power consumption - Compact design - CE compliant Fields of application: - Automotive industry - Supplier industry - Medical technology - Plastics and metal processing - General custom machine engineering Dedpfxsydd Uxj Afnjkh

Condition: used, Technical details: Surftest SJ-210 Dkedpoyhwncefx Afneh Year of manufacture (purchased): 2017 Price: EUR 1,500 Granite surface plate 400 x 250 x 70 Price: EUR 850

Condition: good (used), Analyzer, vapor pressure tester, Minivap VPS -Manufacturer: Grabner, steam pressure tester Minivap VPS -Type: 210-000-00 -Carton dimensions: 200/185/H320 mm Dkodjwbd Twepfx Afneh -Weight: 7.9 kg

Condition: used, Contour measuring device, contour measuring device, contourograph, contourograph, roughness measuring device, roughness measurement, roundness measurement, roughness probe -Manufacturer: Hommel, probe holder for roughness measuring device -Type: KVA type P2/115 Dkodsk H R Huopfx Afnjh -Tactile path: s= 12 mm -Dimensions box: 345/130/H85 mm -Weight: 1.7 kg

Condition: used, Alignment tester, shaft aligner, laser shaft aligner -Manufacturer: db Prüftechnik, alignment tester Optalign 1.5 -Accessories: see photos -Dimensions transport box: 420/290/H555 mm -Weight: 20 kg Dedeiwuzaopfx Afnokh

Condition: good (used), Device tester, power supply -For: 15V devices Dkjdpfx Afjcdlt Ssnoh -Measuring range -Measuring current: max. 300 mV -Dimensions: 250/260/H120 mm -Weight: 1.9 kg

Condition: used, tester, torque wrench, torque tool, torque wrench tester, torque wrench tester -Manufacturer: Norbar, Digital torque tester with case -Type: TruCheck 2 Plus -Part No.: 43521 -Measuring range: 3 - 65 Nm -Mounting: 3/8" -Accessories: see photos -Dimensions: 205/60/H110mm Dodjr H Nlzopfx Afnokh -Weight: 3.8 kg

Condition: good (used), Legionella Water Tester Dkodpfxeb A Sh Te Afnsh -With documents in English -Dimensions: 480/380/H180 mm -Weight: 3.2 kg

Condition: good (used), Year of construction: 1965, Measuring machine, manual Erichsen cupping testing machine, cupping testing machine, sheet metal testing machine -Manufacturer: Klingenthal -Type: 05 -Sheet metal testing machine: Erichsen cupping, up to 2.0 mm Dkodpfx Asw H N Dlefnsh -Accessories: see photos -Dimensions: 460/360/H335 mm -Weight: 20.5 kg