Used Hecht for sale (12)

Condition: ready for operation (used), Conveyor length: 3000 mm, conveyor diameter: 250 mm, on-site inspection is possible, not energized. Pjdpfxjzhnu No Ad Sogr

Condition: new, Year of construction: 2026, Length measuring device ASB ----- - Freely selectable setpoint - Switchover from absolute to relative measurement Pgedpfx Adszr U Nbo Sjr - Easy readability thanks to digital display - Automatic display shut-off - Low installation effort Technical data Length measuring device ASB Measuring range: ASB: 1,000 mm - 6,000 mm Accuracy: +/- 0.1 mm over 3,000 mm Resolution: ± 0.01 mm

Condition: new, Year of construction: 2026, functionality: fully functional, cutting length (max.): 3,000 mm, saw blade diameter: 350 mm, air pressure: 6 bar, section length (min.): 50 mm, HECHT Double Mitre Saw Exenso DS350E - 3000 mm for wood, glass strips, mullions, profile strips, aluminum strips, etc. Item number 942.5103, 1 piece, HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inward) to 135° (outward) - Right head is adjustable - Saw blade mounting Ø 350 mm - Incl. 1 piece of center support. - Clamping of the units is pneumatic. - Positioning control Exenso DS3 with touch panel, 15" display in a dust-protected monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Input of cutting data manually - Processing of data from a cutting list (data set according to specifications) - Processing of measuring tape data (radio measuring gauge GMF) - Ethernet connection 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor and software licenses. Item number 942.5203, 1 x DS feed device, hydropneumatic Item number 723.0121, 2 x DS saw blade for wood Bevel/bevel/flat tooth - positive - Item number 942.5236, 2 x DS workpiece clamping, combined (4 x horizontal, 4 x vertical clamping elements) Combined workpiece clamping consisting of: Swivel clamp, pneumatic - for clamping the material from above. (Free access to the work table) Horizontal clamp, pneumatic - torsion-resistant clamping cylinder with pressure piece. The clamps can be selected individually via the saw's control system. The clamping sequence can also be set via the control system. Including safety pre-tensioning pressure Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item number 942.5241, 1 set DS350 table support, grooved (standard groove), Special grooving according to customer drawing on request! Podpfxszr Uu Ro Ad Ssgr - Documentation: 1 x German or in the respective national language - Item number 945.2007, Packaging DS350 (transport frame) - Item number 944.1023, GMF measuring gauge, 3000 mm complete set (1500 mm plus extension 1500 mm) incl. charger and receiver. A robust aluminum measuring rail with a measuring range of 3,000 mm is ideal for measuring glass strips. Function For use on doors and large window sashes, the GMF measuring gauge can be extended mechanically and safely up to a measuring length of 3,000 mm. Base length: 1,500 mm Extension: 1,500 mm, automatic detection and calculation.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: documentation/manual, Exenso Comfort – Length stop - Exenso positioning control with storage function - Network-compatible Windows operating system - 15” touchscreen control panel - Data import: CSV file (order list) - TeamViewer installed for remote diagnostics & service Pjdpfjzr Ufvex Ad Sogr Automatic mode: Processing of cutting lists Connection options for barcode scanner and label printer Software: Optimization of material consumption, feedback to industry software, and more GMF radio measuring rod: Direct determination of actual dimensions TECHNICAL DATA: Adjustable lengths: Standard: 2,600 mm / 3,600 mm / 4,600 mm / 6,000 mm (special lengths on request) Accuracy: ± 0.2 mm / 3,000 mm Working height: approx. 910 mm + max. 50 mm Mounting side: right or left Operating system: Windows with HECHT Exenso software Power connection: 230 V

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, input voltage: 230 V, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 65 mm, workpiece length (max.): 2,500 mm, workpiece height (max.): 65 mm, workpiece width (max.): 1,000 mm, Equipment: documentation/manual, Stock machine – subject to prior sale! Tactile 3-axis measuring table for fast and precise measurement of flat workpieces. Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Operation | Control | Operating system: 15” touchscreen | HECHT DesQ II software | Windows Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Pedpfx Ajzr Ud Sjd Ssgr Accuracy: Absolute accuracy X/Y +/- 0.10 mm Typical repeatability X/Y +/- 0.02 mm Relative accuracy Z +/- 0.05 mm Typical repeatability Z +/- 0.02 mm Resolution 0.01 mm Measurement: ⦁ Length, width, thickness (relative) ⦁ X/Y distances ⦁ Angularity ⦁ Parallelism ⦁ Borehole position X/Y ⦁ Borehole diameter ⦁ Borehole depth (relative) ⦁ Radii / diameter ⦁ Groove position ⦁ Groove depth (relative) ⦁ Fold position ⦁ Fold depth (relative) ⦁ X/Y/Z position of horizontal bores ⦁ Depth of horizontal bores (relative) Measuring program: 8-point measurement for 4-sided parts (e.g. rectangle, parallelogram, or trapezoid) Procedure: 8 points of the workpiece are scanned (two points each on every line at the corners) Result: Display of 2 x length (top, bottom), 2 x width (right, left), 4 x angle Protocol: When target values and tolerance specifications are entered, a target/actual comparison is created with deviations and displayed in a table. Storage of the measurement results as a PDF (protocol) or in an SQL database for statistical analysis. Inspection and documentation of the manufacturing status in the production process, after cutting, after edging or after drilling the workpieces, depending on the value-added process. Vacuum system (Venturi principle) 6 vacuum suction cups integrated in the measuring field fix the workpiece during the measuring process. Technical data: Dimensions (L x W x H): approx. 2,950 mm x 1,050 mm x 2,090 mm Weight: approx. 450 kg Power connection: 230 V Compressed air connection: 6 bar Air consumption: 90 l/min Operation/Control 17” Touchscreen HECHT DesQ II software Windows 11

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, input voltage: 230 V, measuring range X-axis: 2,750 mm, measuring range Y-axis: 1,250 mm, measuring range Z-axis: 85 mm, overall weight: 2,600 kg, Measuring range: 2,750 x 1,250 mm Demonstration machine – subject to prior sale - Operating system: Windows 11 For measuring external dimensions and performing one-sided inspections of vertical and horizontal boreholes in plate-shaped workpieces. APPLICATION AREA: Tooling aid: Measurement of the first production part Sample inspection: Measurement of samples MEASUREMENT CRITERIA: Dimensions: Length, width, angle Borehole, vertical: Position, diameter, depth, borehole spacing Borehole, horizontal: Position, diameter, depth, distance to the top of the plate. (NOTE: Test pins or inserted dowels are required). Groove: Edge distance, width, depth Pgedpjzr Udrjfx Ad Sjr Radius: Center point position, radius Flange: Width, depth Recesses: Width, edge distance Technical data: Workpiece length (X-axis) min./max.: 180 mm – 2,750 mm Workpiece width (Y-axis) min./max.: 50 mm – 1,250 mm (Note: the measurement of vertical and/or horizontal boreholes as well as grooves and flanges on the Y-axis is possible up to the position 1,150 mm) Workpiece thickness (Z-axis) min./max.: 5 mm – 85 mm NOTE: Other sizes available on request. Accuracy: +/- 0.1 mm Resolution: 0.01 mm (NOTE: Consistent lighting conditions are required to maintain accuracy - independent of daylight) Measuring plane: High-precision, ground granite plate 3,200 x 1,340 x 150 mm Working height above floor: approx. 1,000 mm +/- 50 mm Space required approx. L/W/H: approx. 5,000 mm / 2,000 mm / 1,700 mm Weight approx.: 2,400 kg + control cabinet including control panel approx. 200 kg Total electrical connection: 2500 W Compressed air connection: 6 bar Operating side: left Operating voltage: 230 V / 16 A – (CEE7/7) Network connection: RJ45 Ambient temperature: max. 35 degrees Celsius (NOTE: At higher temperatures, an air conditioning unit in the control cabinet is recommended – available as an option.) Subject to technical changes. The above performance data assumes that suitable workpieces are used. Scope of supply: ⦁ Automatic measuring table with 2-axis servo drive ⦁ Automatic camera height positioning ⦁ 1 x Software license CAD4U and Hecht interface for creating measurement programs on a PC in the preparation area ⦁ 19" PC with CAD4U software license and interface for creating measurement programs, current software version Results and driver for measurement program execution, image processing software ⦁ Camera, lens and lighting for image acquisition ⦁ Operating system Windows Ultimate 64-bit ⦁ Rittal PC cabinet 600x1600x650 mm (W x H x D) ⦁ Test pins for measuring the lateral boreholes: 10 pieces each with diameters 5, 6, 8 ⦁ 4 x right-angle brackets for black parts ⦁ SQL Express database installed on the machine computer Languages: The operating software is available in the following languages: German, English, French, Italian, Spanish, Flemish, Polish, Lithuanian, Russian and Chinese. Other languages available on request. SAFETY AND PROTECTION DEVICES EMERGENCY STOP switch All machines for EU member states with CE marking according to EC Machinery Directive 2006/42/EC Technical documentation stored on PC The measuring table must be completely separated by a protective fence. This and other protective devices are not included in the scope of supply.

Condition: excellent (used), Year of construction: 2018, Number of motors 1 Stück 0 2500 mm Control nein Hecht ES 350 single-sided glazing bead saw ----- Pneumatic pivoting against fixed stops. 45º/ 90º/ 135º with pneumatic sawblade feed pneumatic tilting via manual tilt stop with machine base, pneumatic clamping HM sawblade 350 x 3.0/2.2/30 Z 100 Saw stand dimensions: length 700 mm, depth 1,600 mm, height 1,500 mm 1.5 m touch stop 1.5 m support with support 3 m touch stop Support extension from 1.5 m to 3 m with support Table inserts grooved for rebated glazing beads HECHT ASB manual length stop with digital display, 2,500 mm Psdpovpr N Refx Ad Sjgr With dust extraction unit (Technical specifications according to the manufacturer - no guarantee!)

Condition: as good as new (ex-display), Year of construction: 2026, Number of motors 2 Stück 0 3000 mm Control ja/CNC loading dimensions L x W x H 4000 x 1500 x 1500 mm Weight 800 kg HECHT Double Miter Saw Exenso DS350E - 3000 mm ----- For wooden glazing beads, mullions, profile strips, aluminum strips, etc. Item 1.1 Article number 942.5103 1 pc. HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Includes 1 pc. center support. - Pneumatic clamping of the components. - Exenso DS3 positioning control with 15" touch panel display in a dustproof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Manual input of cutting data - Processing of data from a cutting list (data set according to specifications) - Processing of measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Includes control cabinet, motor, and software licenses. Item 1.2 Part number 942.5203 DS hydropneumatic feed unit Item 1.3 Part number 723.0121 2 pcs. DS saw blade for wood Bevel/Angle/Flat tooth - Positive Item 1.4 Part number 942.5236 2 sets of DS combined workpiece clamping Combined workpiece clamping consisting of: Pneumatic swivel clamp - for clamping the Materials from above. (Free access to the worktable) Pneumatic horizontal clamp - Anti-rotation clamping cylinder with pressure piece. The clamps can be individually selected via the saw's control system. The clamping sequence can also be set via the control system. Includes safety pre-tensioning pressure. Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item 1.5 Part number 942.5241 DS350 table support grooved (standard groove, special grooves according to customer specifications available on request!) Item 3.1 Part number 945.2007 Packaging DS350 (transport frame) ----- Total price in this configuration ex works - on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of the Offcuts for butt-jointed glazing beads instead of the 2nd set Item 1.3 943.5236 DS workpiece clamping combined! Item 2.1 Item number 942.5201 ES / DS workpiece clamping from the front - 2 clamping cylinders, rotationally secured - 2 cylinder holders with clamping levers ----- OPTIONAL accessories, at extra cost upon request: ----- Item 4.3 Item number 942.5237 DS software "Extra Length" (subsequent steps must be confirmed) Pgsdpfxeyy A Iko Ad Sor Sequence control incl. hardware. After entering a cutting dimension > max. cutting length of the system, the cutting is carried out in a timed sequence. (Left unit cuts, right unit moves the material and cuts to size.) ----- Item 2.1 Item number 944.1023 GMF 3000mm caliper complete set (1500 mm plus 1500 mm extension) Includes charger and receiver. A robust aluminum measuring rail with a measuring range of 3,000 mm is ideal for measuring glazing beads. Functionality For use on doors and large window sashes, the GMF caliper can be mechanically extended safely and quickly to a measuring length of 3,000 mm. Base length: 1,500 mm Extension: 1,500 mm, automatic detection Accuracy of ±0.1 mm Resolutio...

Condition: new, 0 3350 mm Working height bei 90° = 180 mm 0 45°/90°/45° 0 Podpfoy I Dclsx Ad Ssgr Cutting height at 45° 140 mm

Condition: new, mm Working height bei 90° = 315 mm 0 45°/90°/45° 0 weight 2050 kg Pgedpfxsy I Dcfs Ad Ser Cutting height at 45° 230 mm

Condition: new, mm Pedpfxoy I Db Uo Ad Ssgr Working height bei 90° = 290 mm 0 45°/90°/45° 0 weight 1800 kg Cutting height at 45° 210 mm

Condition: used, Max. insertion length: 2,600 mm Direct input of the measurement via touchscreen or via glass scale Pgjdpfjyq Db Esx Ad Ssr Profile carriage can be folded up for loading