Used Tensile Testing Machine for sale (70,514)

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FA005TN.A50.002 Article No. Base Machine: 1004473 Z005 TN AllroundLine Table-Top The system is a comprehensively equipped ZwickRoell Z005 TN AllroundLine tabletop testing machine. The system has been specifically configured for mechanical and functional testing of automotive injectors and injection systems. In addition, the system features pneumatic sample holders, a visual color recognition system, and a precision scale, as well as extensive product-specific accessories. Technical data: Testing machine: Maximum testing force of the load frame: 5 kN Total testing space height: 1,164 mm Testing space height at the bottom without attachments: 1,030 mm Testing space height at the top without attachments: 1,015 mm Testing space width: 440 mm Crosshead speed: 0.0005 to 3,000 mm/min Return speed: max. 3,000 mm/min Deviation of the drive speed: max. 0.05 % Drive stroke resolution: 0.959431 nm Positioning repeatability: ±2 µm Control: adaptive Control cycle: 1,000 Hz Load cell: Type: Xforce HP Rated force: 0.5 kN / 500 N Suitable for static and dynamic tensile and compressive forces Accuracy class 1 from 1 N Accuracy class 0.5 from 5 N Maximum operating force: 150 % of the rated force Limit force: 150 % of the rated force Breaking force: 300 % of the rated force Protection class: IP54 Connection thread: M28 × 1.5 Connection pin: Ø 20 mm Measuring and control electronics: ZwickRoell testControl II machine electronics DCSC measuring module for strain gauge load cells Measured value acquisition rate: 400 kHz Measured value transmission to PC: 500 Hz Automatic zero point correction Measured signal time correction Ethernet interface to PC Measuring amplifier for strain gauge full bridges Measuring range: 0.2 to 165 % of the rated measured value Measured value acquisition rate of the DCSC module: max. 10 kHz Force measurement technology according to ISO 7500-1 and ASTM E4 Testing device for automotive injectors: Article No.: 3002956 Maximum testing force: 200 N Dimensions: approx. 396 × 235 × 309 mm Weight: approx. 20 kg Pneumatic sample holders: Article No.: 3001461 Maximum testing force: 200 N Maximum opening width: 40 mm Closes on both sides and symmetrically Interchangeable clamping jaws Dimensions of the load frame: Height without base profiles: 1,314 mm Height with base profiles: 1,528 to 2,108 mm Width without base profiles: 680 mm Width with base profiles: 856 mm Width including machine electronics: 1,044 mm Depth with base profiles: 650 mm Depth including machine electronics: 690 mm Weight: Load frame with machine electronics: approx. 161 kg Base profiles: approx. 31 kg Machine with typical attachments: approx. 226 kg + Laser measuring system / visual color recognition system from Keyence + Precision scale: Article No.: 085770 Maximum load: 220 g Bdodjzwvu Nspfx Aa Ish Readability: 0.1 mg Repeatability at 200 g: 0.1 mg Linearity: 0.25 mg RS232 interface for data transmission Separate weighing cell, display unit and operating terminal + PC with ZwickRoell testXpert III testing software, version 1.2 + Microphone and many other accessories shown in the pictures Condition: used Optical condition according to the pictures Functional scope according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Shipping or freight shipping is possible. Subject to changes, errors and prior sale.

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material analysis Testing of tensile strength, bond tensile strength, and shear strength of masonry and wood connections, etc. - Nail pull-out test - Compression test on cement and mortar prisms - Bending test on cement and mortar specimens - Compaction test - Bending test on wood and concrete - Shear strength test on wood - Splitting test on wood Bsdsxmv H Ropfx Aa Ijdh - Scaffolding connection test - Shear strength test on walls - Tensile test on walls - Tensile test on structural steel - Tensile test on wood - Pull-out test on structural steel - Reversal bending test on structural steel - Anchor pull-out test - Bond tensile test I have made a video demonstrating the function of the testing machine. I can send this video to a mobile number via WhatsApp or Signal! Shipping and loading are possible at my warehouse!

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: TR-A-16/2024, working height: 900 mm, workpiece weight (max.): 120 kg, total width: 1,400 mm, total length: 4,670 mm, total height: 3,550 mm, empty load weight: 550 kg, height adjustment type: mechanical, load capacity: 120 kg, table width: 3,500 mm, table length: 3,000 mm, We offer this ROL-PAS TR-A BOX machine for the assembly and testing of roller blinds, in like-new condition, manufactured in 2024. Manufacturer: ROL-PAS Model type: TR-A BOX Serial number: TR-A-16/2024 Date of manufacture: 12/2024 If you have any further questions or require more information, please do not hesitate to send us a message or call us. Bdsdjz Hmbiepfx Aa Ish

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Bedpfx Aozwvtxea Isdh Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Bjdpfszimgtex Aa Isdh Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: excellent (used), Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 Material Testing Machine, 20 kN Manufacturer: Zwick / Roell Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Machine Type: Servo-electric Material Testing Machine / Universal Testing Machine Max. Testing Force: 20 kN For sale is a used Zwick / Roell Z020 Allround-Line material testing machine with testControl II control system, industrial PC, and installed testXpert V3.5 software. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, and numerous other materials, and is used in testing laboratories, quality assurance, research and development, and training. Technical Data: Manufacturer: Zwick / Roell Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Max. Testing Force: 20 kN Testing Direction: Tensile and Compression Testing Space Height: 1,000 mm Crosshead Speed: 0.0005–1,000 mm/min Power Supply: 230 V / 50–60 Hz Power Consumption: 8 A Control System: testControl II Software: testXpert V3.5 Load Cell: Zwick / Roell Xforce P 20 kN Zwick / Roell Xforce P 2.5 kN Dimensions: Machine Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Machine Weight: approx. 212 kg Equipment: testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Testing fixture Connection and cabling Accessories as shown in the pictures Shipping Data: Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Shipping Weight: approx. 212 kg Condition: Used Optical condition as shown in the pictures. Functional scope as shown in the pictures. Nameplates present. Scope of Supply: Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Bsdpfx Aozra Rqea Ijdh Testing table Testing fixture Connection and cabling Further accessories as shown in the pictures The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: used, Zwick Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Footprint: 1600 cm² Technical data: Fmax: 50 kN Vmax: 1500 mm/s Bedpfxjzil Uio Aa Ijdh Maximum test chamber height: 1370 mm Test chamber width: 565 mm Accessories: Kistler force sensor 50 kN via NI-Labview Hydraulic power unit 280 bar Mounting surface: 415 cm² Clamping device / specimen holder included (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Weight approx. 1200 kg without frame, etc. (Subject to alterations and errors in technical data; all information provided without guarantee!) For further questions, please feel free to contact us by phone.

Condition: used, functionality: fully functional, Used tensile testing machine, model Zwick Z2.5 Zwicki, equipped with new control electronics and Windows-based PM-Soft-Smart software for tensile, compression, and bending tests up to 2.5 kN. Bedpoykpamefx Aa Isdh The testing machine has been retrofitted with a new control unit featuring an MFC controller and can be operated exclusively via PC. Connection to a standard PC or laptop is established via a USB cable. The PM-Soft-Smart Windows software is a highly versatile control and evaluation software, allowing the user to create any number of custom test programs. The delivery also includes a test specification created according to customer requirements. Suitable grips for virtually all testing tasks are available as accessories. Technical data: Single-column testing machine incl. 2.5 kN load cell Crosshead travel: 800 mm Test space depth: 100 mm Displacement resolution: 0.0001 mm Test speed: 0.2–1000 mm/min Power supply: 230V AC Dimensions (D x W x H): 414 x 320 x 1260 mm Weight: approx. 40 kg

Condition: excellent (used), Zwick Type: BZ2.5/TN1S Zwick table-top testing machine, tensile strength testing machine Bdjdpfx Aajzdry Io Ioh Application area: Wide range of applications, from testing plastics and elastomers to testing paper, textiles, foam, and wire, as well as component testing. Load frame: Max. test force FN in tension/compression: 2.5 kN Height (h1) approx. 770 mm Width with electronics unit: 320 mm Depth with electronics unit: 414 mm Height of the working area h min ... h max: Travel carriage angle mounted upwards: 227 ... 573 mm Travel carriage angle mounted rotated by 180°: 57 ... 403 mm (each without connecting bolt) Connection values: Electrical connection: 115/230 V 4/2A-1PH/PE/N Power consumption: 0.4 kVA Mains frequency: 50/60 Hz 2.5 kN Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Zwick tensile testing machine Model: Z20 Controller: BX1-EZ020.A4K-000 Bdedpfxozil Upj Aa Ish Technical Data: Stroke: 200 mm Piston dimensions (H x W x D): 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: ClipOn extensometer 13.5 mm Extensometer MFA 25 (temperature range up to +200°C) Computer + Software: testXpert II V3.5 Climate chamber: Airtemp LKG-K-TK-50-040/150 Temperature range: -40°C to +150°C Climate temperature range: 20°C to +90°C Humidity range: 10% to 95% Test chamber volume: 50 liters Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Voltage: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Condition: used Total weight: approx. 1500 kg Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) For further questions, we are happy to assist you by phone. Written orders possible by email or fax.

Year of construction: 2015, operating hours: 100 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4S 10kN 2268/000 1215 902, Dyna-Mess TP 10kN HF Cyclic Testing Machine / Endurance Testing System – Top Condition, including temperature chamber (up to 120°C) & software Description: Manufacturer: DYNA-MESS Prüfsysteme GmbH Model: TP 10kN HF (Servopneumatic High-Frequency Cyclic Testing Machine) Maximum test force: 10 kN (static and dynamic range) Maximum machine travel: 12 mm Bdedpfx Aozunz Nja Ish Date of purchase: December 2015 Condition: Almost new, very little use, immediately ready for operation (Plug & Play) Availability: Immediately For sale is a compact, high-precision cyclic testing machine from the premium manufacturer DYNA-MESS with a 10 kN nominal load and 12 mm stroke. The system was acquired for dynamic endurance tests and lifetime determination as part of a research project, and has not been used since. It is in excellent, virtually new condition both visually and technically. The complete package includes a matching temperature chamber with controller up to 120°C. This enables standard-compliant, dynamic testing of components and materials under realistic thermal environmental conditions. System & Scope of Supply: Load frame Dyna-Mess TP 10kN HF with high-precision force and displacement sensors. Complete PC including installed and calibrated control software DYNA-TCC under Windows 7. The system operates completely independently and is immediately ready for use. Temperature chamber with external control unit for tests up to 120°C. All associated documentation and connection cables. The machine is perfectly suited for laboratories, universities, or quality assurance departments looking for a reliable system for fatigue and endurance testing without incurring the cost of a new machine. Inspection of the machine is possible by prior arrangement. As this is a commercial sale, the machine is sold ex works without warranty or guarantee. The sale is preferably to a buyer who arranges self-collection (dismantling and transport must be organized by the buyer). Price: €20,000 negotiable plus VAT.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH Bdodpoz Eh Egefx Aa Ijh

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 101210/001, For sale is a VISCOM Inline-AOI S3088-III, manufactured in May 2011, serial number 101210. The system is no longer in its original technical condition from 2011. At the end of 2022, it underwent a comprehensive modernization and maintenance by a VISCOM service technician. Approximately €29,000 was invested in the modernization, including hardware, software, and service. Condition: Used, functional. Technical specifications: - Manufacturer: VISCOM AG - Model: S3088-III - Year of manufacture: 05/2011 - Serial number: 101210 - VISCOM upgrade to VEG 101 - VISCOM conversion kit RK.C.0119 - Software: vVision - System is recognized as S3088 Flex on the software side - 8M-CBW4 (4SR) Combi camera module, White Left - 4 orthogonal cameras + 4 cameras for oblique view - VISCOM Type 126.209.B.47e - vVerify - VISCOM 2D libraries - ePM interface, dongle-based, for test program creation based on Gerber data and component/part data - Import of pad geometries for post-reflow test program creation - Multilingual user interface, including German, English, French, Italian, Spanish, Portuguese, Czech, Polish, Hungarian, Romanian, Russian, Swedish, and Chinese New system computer: Bodpfx Aajzuw R Hj Iedh As part of the modernization, a new system computer was installed: Intel Core i7-11700K 32 GB RAM Windows 10 Enterprise Additionally, a new 24" touchscreen monitor from Fujitsu was installed. The following work was carried out, among other things: - VEG-101 upgrade - Installation of the new system computer - Data transfer from the previous to the new system computer - Switch to vVision - M3 annual maintenance - Cleaning of the sensors - General cleaning of the system The work performed is documented in the available VISCOM service reports and invoices. The scope of supply includes, among other things: - VISCOM calibration case - Calibration plates - UPS system - UPS equipped with a new RBC123 battery in August 2026 - Operating manual - Transportation manual - VISCOM service reports - Invoices for the work performed - VISCOM training materials - vVision user training materials Special feature of the machine This system is not simply an older S3088-III in its original condition. The machine has undergone extensive technical modernization and has been equipped with a new system computer, a more up-to-date VISCOM operating environment vVision, and the VEG-101 platform. The investment of approximately €29,000 in modernization, hardware, software, and VISCOM service is accordingly documented. The system is particularly suitable for companies that are looking for a VISCOM inline-AOI with extensive features and completed modernization and prefer a used system over a new machine.

Condition: ready for operation (used), throat depth: 150 mm, overall weight: 80 kg, Reicherter Stiefelmayer BRIRO VAK Hardness Tester, including VAT. Manufacturer: Reicherter Type: BRIRO VAK Outreach: approx. 150mm Max. test height: 250 - 300mm Weight: approx. 80 kg You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Bdodeznh Nyspfx Aa Ioh Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: ready for operation (used), Reicherter Stiefelmayer BRIRO R Hardness Tester, including VAT. Manufacturer: Reicherter Type: BRIRO R Outreach: approx. 150mm Max. test height: 240mm Weight: approx. 100 kg You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Bsdpfxoznh U As Aa Isdh Deviations in technical data and errors in the description of the article may occur and are subject to change.

Condition: good (used), Zwick Type: BZ1.0 / TH1S Zwick table-top testing machines Bsdpfjzdryzjx Aa Iodh Zwick with a maximum force of 1.0 kN. Stroke length: 1150 mm. Testing speed: 0.1 ... 1800 mm/min Scope of delivery: (See images) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg. Bdjdpfx Aaoxw N Uvs Ieh

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Bdodpfxoxxb Rro Aa Ijh Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Bsdpfxoyahv Se Aa Isdh Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: used, Year of construction: 2021, Canon CX-1 system, including computer, packed in its original manufacturer’s boxes. Serial number: 210141 – Year of purchase: 2022 Bedozmxqrspfx Aa Iedh The system was purchased for a brief clinical study and has seen very limited use; it is in excellent condition.

Year of construction: 2011, condition: used, functionality: limited functionality, machine/vehicle number: 8802L1280, We offer this used Instron 2527-113 / 104999 servo-hydraulic dynamic testing machine, model 8802, manufactured in 2011. Manufacturer: Instron Model: 2527-113 / 104999 Serial number: 8802L1280 Control type: Digital control electronics Force: 160 tons Working width: 1120 mm Bdjdpfozgvrtox Aa Ijh Stroke: 0 - 200 mm Stroke rate: 0 - 6000 1/min Table area: 800 x 560 mm Ram adjustment: 0 - 1100 mm Weight: 2.5 tons Space requirement (W x D x H): 1.1 x 1.2 x 3.6 m If you have any questions or require further information, please feel free to contact us.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Bdjdpsx D Tbmsfx Aa Ish Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Bdjdpfx Aozizlqsa Ioh Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: excellent (used), Zwick Type: BT1-FR050TH.A1K 50 kN Universal Testing Machine Zwick/Roell BT1-FR050TH.A1K Material Testing Machine – Precise Strain Gauge Testing Note: PC not included!! Bdsdpszii Ugofx Aa Ijh Highlights: - Test force: 50 kN (tension/compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) - Measuring range: 0.2 – 165% of nominal value, data acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) - Positioning repeatability: ±10 µm - Crosshead speed: 0.0005 – 600 mm/min - Robust construction - Compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth - Low noise: 59 dB(A) - Ambient conditions: +10 to +35 °C, humidity 20–90% Special features: - Ideal for research, development, or industrial material testing Dimensions & weight: Load frame: - Test force (tension/compression): 50 kN - Load frame height: 1,714 mm - Overall height: 1,814 – 2,688 mm - Load frame width: 760 mm - Overall width: 936 mm - Load frame depth: 477 mm - Overall depth: 722 mm Weight: - With electronic unit: 230 kg - With typical accessories: approx. 300 kg Condition: used Scope of delivery: (see picture) - ZwickRoell BT1-FR050TH.A1K testing machine - Operating manual (Specifications are subject to change and errors excepted!) If you have any questions, we are happy to answer them by phone.

Condition: good (used), Year of construction: 2023, A pre-owned Optos California ultra-widefield retinal imaging system, acquired in 2024, is supplied in its original Optos transport packaging. The complete system was purchased in 2024. Some individual components may have manufacture or procurement dates from 2023, which is normal for a multi-component system. Configuration: FA Model: California / P200DTx Manufacturer: Optos Condition: Pre-owned – used during a short clinical study The Optos California platform is designed for ultra-widefield retinal imaging and provides up to a 200° field of view in a single capture. This FA configuration supports fluorescein angiography in addition to the retinal imaging modalities available on the California platform. Included configuration: Scan head Touchscreen tablet & stand Image server with monitor Specialized device table OptosAdvance software Color & Red-free imaging Autofluorescence Fluorescein angiography The system is currently securely packed and palletized for transport. The shipment includes the Optos system and associated device table as shown in the image. Bedpoz Dq Stsfx Aa Isdh Inspection is available by appointment. Worldwide shipping can be arranged.