Used Shaving Machine for sale (64,803)

Condition: used, Year of construction: 1977, max. grinding diameter 400 mm grinding width 0 mm Cjdpot Hwnvsfx Aqgorf max. module min. module total power requirement 3 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features * Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunately the machine does not have many accessories. It would therefore be a good investment as a second machine if you already have suitable accessories available.

Condition: excellent (used), Year of construction: 2014, max. wheel diameter 20 - 320 mm gear width 150 mm max. module 8 Crodpfx Aev Nracoqgsf min. module 1 surface area 1200 x 190 mm tool diameter 175 - 260 mm turning speeds 45 - 465 U/min Control Siemens total power requirement 13 kW weight of the machine ca. 5,2 t Machine in excellent condition, with many accessories. Retrofitted in 2014, Siemens control system.

Condition: new, Year of construction: 2026, WOOD SHAVINGS MACHINE KÄLIN Hobeltechnik, mod. MPC-P • Quantity of fresh shavings by hour: 3.800 Kg/hour • Measures logs box: 2.800mm x 1100mm x 1.300mm • Max. log input length: 2.650mm • 2 removables symmetrical cutterheads. Lenght 1.140mm. Each one in 3 pieces of: - Diameter: 200mm - Length: 380mm Csdpfxovk Saxs Aqgerf - Number of knifes: 8 - Sharpening full cutterheads, without removing knifes!! • 2 extra removables symmetrical cutterheads, for replacement during sharpening. Super fast cutterheads change patented system!! • Power of the cutting heads: 90 kW/120 HP • Feeding speed controlled by ELECTRONICAL INVERTER: 6 to 36 m/min • Automatic control of the forward-charge ratio of the machine • Power of the feed motor: 15 kW/20 HP • Control System of the material level inside the logs box, to avoid working without logs • Cabinet and control panel. Touch screem to control the machine • Motorized conveyor belt for the wood shavings. 800mm x 5.000mm • Weight: 11.000 Kg • CE

Condition: used, Year of construction: 2002, Technical details: Cedpfeyud Tpjx Aqgorf max. wheel diameter: 150 mm gear width: * mm max. module: 3,5 min. module: 1,25 total power requirement: * kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,35 x 2,10 x 2,35 m Width of teeth: 45 mm boring diameter: 100 mm surface area: 1300 x 300 mm

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 150 mm gear width: * mm Credpfx Aoyud Tieqgjf max. module: 3,5 min. module: 1,25 total power requirement: * kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,35 x 2,10 x 2,35 m Width of teeth: 45 mm boring diameter: 100 mm surface area: 1300 x 300 mm

Condition: excellent (used), Year of construction: 2003, 2003 Mitsubishi CNC Shaving Gear cutter grinder Model ZA30CNC, Year 2003, With Fanuc Series 16i-M HMI, Includes Credpfxoywftkj Aqgof FN-0013 Dust Collector, Power 200/220 Volts / 3 Phase , Weight 15000 Lbs.

Condition: new, Year of construction: 2026, operating hours: 24 h, functionality: fully functional, machine/vehicle number: AVB-HELIX100ST4, total length: 6,500 mm, total width: 2,600 mm, total height: 3,500 mm, height adjustment type: mechanical, overall weight: 16,000 kg, compressed air connection: 8 bar, shaft diameter: 260 mm, warranty duration: 12 months, input voltage: 380 V, input frequency: 50 Hz, infeed height: 800 mm, control cabinet width: 600 mm, control cabinet length: 2,200 mm, control cabinet height: 2,000 mm, working length: 3,000 mm, workpiece width (max.): 800 mm, empty load weight: 16,000 kg, workpiece length (max.): 3,000 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 3,000 rpm, FEATURES OF THE WOOD SHAVING MACHINES  Bin size: 3000 mm  Hopper is equipped with the Speed Control System  The robust machine frame structure of single-piece steel construction  Heavy body structure against vibration caused by long-term use of the machine  Conveyor extraction: 1000 mm wide outfeed provided with a rubber band or PVC 4 mm thickness  Direct motor operation with an independent control panel with a digital screen,  PLC-controlled electric panel independent from the machine, minimum 5-6 meters away from the machine,  Can be operated with 380V 50-60 Hz (additional transformers can be added for foreign countries operating at different voltages, optional)  Adjustable knife heights and cutter heads  Possibility to adjust shavings thickness between 0,4 and 1,2 mm(for straight blade models)  Blades and speed can be varied to produce Large Flakes (Equestrian), Small Flakes (Poultry Layers), Fine flakes (Poultry Broilers)  To avoid downtime, a few sets of spare blades should be ordered together with each machine.  Shavings outlet: Gravity discharge from the cutter heads to the belt conveyor  easy cutter head blade adjustment system;  All cutter head blocks are moved out on the machine during the blade changing.  We are also supported by our customers with blade purchasing,  All parts used in our machines are CE certified and selected with the high-efficiency principle  Knives T.C.T. Carbide 14*14*2,0 mm CERATIZIT Made in EU, bearings COC, motors use the highest quality Turkish or imported products (WEG, SIEMENS, optional).  Automatic lubrication system for the whole machine's essential parts  All machines will be CE standards  The hydraulic system will work with the proportional valve.  Double-armed hydraulic system for the extra power of heavy-duty work  Control panel designed with Mitsubishi Electric, AB (Allen Bradley), Siemens, Schneider, or ABB  Modem Ethernet connection for the main company  The wood shaving machine output will be on the right side or the left side  digital display screen for control in one touch  All blades Diamond 14*14 mm or 15*15 mm, 500 pcs long-life blades  Directly mounted to the cutter head for all-electric motors to prevent losing power  Specially produced spiral helix mobile roller system with a T.C.T. carbide knife (first and only in Turkey)  Separate the control panel and the user interface panel TECHNICAL SPECIFICATIONS Number of Cutterheads 4 Length of Cutter Head 100 cm Number of Blades 500 Carbide/cutter head Power Supply 4 *37 KW = 148 KW (198,5 HP) Hopper Working Stationery Codpogmbtqjfx Aqgsrf Hopper Dimensions mm 3100*1200*1000 Working Voltage 380 V-400V-460V-560V 50-60 Hz Conveyor Band Motor 0,75 KW Hydraulic Motor 22-30 KW Total Power 181 KW Cutterhead Speed 2800 rpm Cutterhead Diameter 230 mm Shaving Depth 0,03 mm - 0,05 mm Max.Log Input Length 150-300 cm Max.Log Input Width 10-90 cm Working Distance 2200 mm Machine Dimensions L6450 x H3014 x W2514 mm Weight 17.000 Kg Production capacity: 4.500-5.000 kg/h

Year of construction: 2023, condition: new, TECHNICAL DESCRIPTION OF AVB-HELIX100BB The size of the log hopper can be adjusted to meet the customer's needs. The hopper dimensions are 230-250 cm in length, 100 cm in width, and 110 cm in height. The cutter heads are designed to be movable for simple operation. The hopper speed is adjustable to control the thickness and amount of shavings produced. It also has a sensitive shaving type for continuous use. The hopper is constructed with heavy-duty steel and has a total weight of 7,000 kg. Its dimensions are 540 cm x 165 cm x 185 cm. The cutter heads are run by two electric motors, each with a power of 37 kW. They operate at 3,000 RPM and are equipped with inverters. The production rate for shavings is between 2,800 and 3,000 kilograms per hour. double hydraulic cylinder to move the log hopper. We offer a cutter head design that is particularly suited for small flake production, with the added benefit of being available for chicken farms. Additionally, we also have a larger flake option that would be suitable for horse stables. Our cutter heads are equipped with T.C.T. carbide blades and designed in a spiral helix type to create mini flakes. We place 400-500 pieces of carbide blade to ensure top-quality wood shavings for animal bedding industries. The size and thickness of the shavings can be easily controlled by adjusting the head RPM and the travel speed of the hopper. Crjdpfonl Efxsx Aqgjf Our bearings cups are equipped with high-quality heavy-duty types such as COC, TIMKEN, or SKF. Adding lubrication oil is hassle-free. Our hydraulic motor has 15 KW power with a speed control unit drive. Additionally, we have an anti-jamming system between the plate and the hopper to prevent splinters. Our machine can handle any type of wood, including slabs, about to the shape of the cutter heads. You can also use off-cuts and all types of residues for perfect results. If needed, we can add a pneumatic press to the machine hopper for even better performance. TECHNICAL SPECIFICATIONS AVB-HELIX100BB Number of Cutterheads 2 Operation Length of Cutter Head 100 cm Number of Blades 500 T.C.T / cutter head Power Supply 2 *37 KW = 74 KW( 99,23 HP) Hopper Working Hydraulic Hopper Dimensions mm 2200*1000*1000 Working Voltage 380 V 50-60 Hz Conveyor Band Motor 1,5 KW Hydraulic Motor 15 KW Total Power 90,5 KW Cutterhead Speed 3000 rpm Cutterhead Diameter 250 mm Shaving Depth 0,03- 0,5 mm Max.Log Input Length 150-220 cm Max.Log Input Width 10-95 cm Working Distance 2200 mm Machine Dimensions L5400xH1650xW1850 mm Weight 7.000 Kg Production Capacity 3000 kg/h

Year of construction: 2025, operating hours: 24 h, condition: new, functionality: fully functional, machine/vehicle number: AVB-48, AVB-48 Wood Shaving Machine Heavy-Duty Performance. Industrial Reliability. The AVB-48 is one of our most popular heavy-duty wood shaving machines, engineered for high industrial capacity and consistent performance. Designed to process both round logs and offcuts with minimal material size requirements, this model is ideal for log shaving as well as wood waste processing. Built with a robust, long-lasting body structure, the AVB-48 ensures durability even under intensive use. It comes equipped with T.C.T. carbide blades for superior cutting precision and extended service life. Also, we can be equipped with straight blades for horse shavings production as well. For enhanced versatility, the machine can be fitted with an optional hopper pressing system—perfect for handling small pieces and offcuts efficiently. The AVB-48 supports both planer blade and carbide blade working principles, offering flexibility to match your production needs. TECHNICAL DETAILS; TECHNICAL SPECIFICATIONS AVB-48 or AVB-48HELIX Number of Cutterheads 4 Length of Cutter Head 60 cm Crsdpfoxwizpex Aqgsf Number of Blades 190 T.C.T. blades/cutter head or 7 straight blades Power Supply 4 *11 KW = 44 KW (59 HP) Hopper Working Hydraulic Hopper Dimensions 1500*600*900 mm Working Voltage 380 V 50-60 Hz Conveyor Band Motor 0,75 KW Hydraulic Motor 7,5 KW Total Power 52,25 KW Cutterhead Speed 3000 rpm Cutterhead Diameter 160 mm Shaving Depth 0,2 mm - 1,2 mm Max.Log Input Length 75-150 cm Max.Log Input Width 10 - 45 cm Working Distance 1200 mm Machine Dimensions L4300 x H1700x W1600 mm Weight 3.500 kg Production Capacity 1000-1200 kg/h

Condition: good (used), Year of construction: 1993, Equipped with: 9" Cutter Head Power Stocks Crowning Auto Loader Heidenhein Scales Variable Feed/Speed Cutter Head RS232 Serial Port Trabon Lube Coolant W/Magnetic Chip Separator AC Servo Motors Full Splash Guards Stack Light Manuals Specifications: Work Gear Pitch Diameter 9" & 12" Cutter Head: 1-12", 1-8" Work Gear Max. O.D. 9" & 12" Cutter Head: 12 1/2", 8 1/2" Diameter Pitch Range: 4-20 Distance Between Centers: 23" Cutter RPM 9" & 12" Cutter Head" 50-500, 50-400 Max. Table Travel Conventional, Tangential, Diagonal: 5", 2" 5"-2" Diagonal Traverse Angle Straight Shaving: 0 Deg. - 90 Deg. Traverse Angle Crown Shaving: 45 Deg. Max. Approx. Max. Table Angle Crowning: 5 Deg. Max. Table Angle Taper: 1 Deg 30' Max. Cutter Head Crossed Axes Angle Left & Right: 25 Deg. Crodjruahwepfx Aqgef Table Cross Feed Inches Per Minute: .5-35 Table Up-Down Feed Inches Per Minute: .004-12.5 Table Up-Down Travel: 8 1/8" Approx. Weight: 9600 lbs

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Cedpozrnkrjfx Aqgerf Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: good (used), Year of construction: 2013, 480mm swing over bed, 257mm Swing over the Cross-slide, 1250mm between centres, 80mm spindle bore, 25-2500rpm spindle, Codpfxszqr Hns Aqgorf 7.5kW Spindle Motor, coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 11876, travel distance X-axis: 1,524 mm, travel distance Y-axis: 596 mm, travel distance Z-axis: 584 mm, quill travel distance: 127 mm, quill diameter: 105 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 40 rpm, table width: 355 mm, overall weight: 3,750 kg, table load: 850 kg, XYZ SMX 5000 CNC Bed Type Milling Machine Model: SMX 5000 S/No.: 11876 Year: 2013 Control: ProtoTrak SMX Table Size: 1930 x 355mm Travels (X,Y,Z axis): 1524 x 596 x 584 Quill Diameter: 105mm Codpfx Aqoznkkaogerf Max. Quill Travel: 127mm Spindle Taper: 40 ISO Spindle Speed Range: 40 – 5000 RPM Spindle Motor Power: 7.5 HP Max. workpiece weight: 850 kgs

Condition: used, Year of construction: 2017, Used 2014 XYZ SMX 5000 CNC / Manual Bed Milling Machine. Supplied with ProtoTRAK SMX Control, Electronic Handwheels, TRAKing & DXF File Reader, Power Drawbar, Fully Programmable Spindle Drive and Custom-Made Splash Guards. SPECIFICATION: TRAVELS: X Axis: 1,524 mm Y Axis: 596 mm Z Axis: 540 mm Maximum Daylight Under Spindle: 610 mm Quill Travel: 140 mm TABLE: Length: 1,930 mm Width: 356 mm T-Slot Width: 15.9 mm Maximum Table Load: 850 kg SPINDLE: Motor Power: 5.75 kW (7.5 HP) Speed Range: 40 - 5,000 rpm Taper: ISO 40 Quill Diameter: 116 mm Programmable Spindle Drive HEAD: Crjdszgwq Djpfx Aqgsf Head Tilt Left: 45° Head Tilt Right: 45° CONTROL: ProtoTRAK SMX Conversational CNC Control Electronic Handwheels TRAKing Function EQUIPMENT: Power Drawbar Splash Guards GENERAL: Machine Weight: 3,100 kg

Condition: excellent (used), XYZ SLX 555 x 3M CNC Lathe (2016) Crsdpfox Hp I Rox Aqgjf Stock Number 2851 Protrak SLX CNC Swing over bed 560mm Swing in gap 935mm Swing over cross slides 350mm Distance between centres 3000mm Spindle bore 104mm Additional Features Protrack SLX Control Drilling Attachment 4 Way Toolpost 3 Jaw Chuck 3 Point Steady

Condition: new, mileage: 1 km, power: 50 kW (67.98 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,850 kg, lifting power: 1,000 kg/m, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, Equipment: additional headlights, cabin, GG010 The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Price 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg SPECIFICATIONS Model: GG10 Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Cedoiit Erspfx Aqgjrf Wheelbase: 2170mm Track: 1285 mm MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Bale clamp: 950 Eur Grass clip: 950 Eur Lawnmower: 1450 Eur Snowplow: 1375 Eur

Condition: used, New 2013 Table size 1474 x 356 mm X axis 1016 mm Y Axis 596 mm Z Axis 584 mm (Head Traverse) Spindle Speeds 40 – 5000 rpm & 40ISO 7.5 hp Spindle Drive. Max Table load 850 kg Crodpfx Ajyhdi Rsqgof

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Csdpfszkbirox Aqgorf Jet Machinery Stock Number:79248 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Codpfx Ajzi Awhoqgorf Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, XYZ SMX 2000, Year 2017, from research and development facility, tooling and vices in images not included. Prot Trak SMX Control Codjx Saulopfx Aqgorf

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm Crodjzb Ipzjpfx Aqgof 1750 mm between centres Coolant pump and tank

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 660 x 450 x 500mm, Cjdpfjzbituox Aqgorf Table size 720mm x 420mm, table load 500kgs, spindle speed 12,000rpm, spindle motor power 28Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 24m/min, Spindle taper BT40, 12 station ATC

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Credpfsq R Tnzex Aqgjf Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, swarf auger.

Condition: used, Year of construction: 2019, operating hours: 692 h, travel distance X-axis: 4,500 mm, Third-generation CMA drilling center for steel profiles and structural parts, built 2019 with only approx. 692 operating hours. OMRON touchscreen CNC with dialog and DIN/ISO programming, 4,500 mm X-travel, BT40 spindle 50-4,000 rpm (13.1 kW, up to 125 Nm) for solid drilling up to dia. 36 mm and tapping up to M24 in steel. Pendulum operation for loading during machining, 10-position tool changer, Z-Reader height probing and coolant through spindle. Fully functional. Crjdpfx Aqjzmyzfegef

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: Specification Value Manufacturer X-TEK Systems Ltd., England Model RTR160UF Type Ultra Focus X-Ray System Max. X-ray voltage 160 kV Max. power 60 W Focal spot size 5 (Ultra Focus) Manipulator 50 kg, 5 axes Power supply 230 VAC, 50/60 Hz Serial number RTR/124 Cjdpszl Screfx Aqgorf Model: RTR160UF X-ray source: 160 kV, 60 W, 5 m Ultra Focus Manipulator: 50 kg, 5-axis Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, likely designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging.