Used Scraper for sale (631)

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Hnedpfx Asphvl Tobkju Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Year of construction: 2010, operating hours: 10,000 h, condition: refurbished (used), functionality: fully functional, MEWA UC 120 B with HNDE, 2 x 30kW / 15 RPM. Large bale infeed hopper. Hnsdpfoz A R I Ssx Abkju Includes a discharge conveyor and a 10-meter-long inclined conveyor. Neodymium magnet roller at the head. The UC 120 B was manufactured in 2010 and completely overhauled in 2025. The cutter unit is brand new. New blades, new shafts, new bearings, new scrapers. Plus costs for dismantling and transport.

Condition: used, Year of construction: 1999, functionality: fully functional, overall weight: 12,000 kg, power: 5.5 kW (7.48 HP), input voltage: 400 V, empty load weight: 5,200 kg, DGUV certified until: 02/2027, We are offering this used Husmann SPB 20 FKL press container, manufactured in 1999, for sale. Type: SPB 20 FKL Machine No.: 18590 Volume: 20.0 m3 Power: 5.5 kW Unladen weight: 5200 kg Hodpfxezg Ha Ie Abkjnu Permissible total weight: 12000 kg Voltage: 400 V Year of manufacture: 1999 Last maintenance (UVV & DGUV): 02/2026 Two-part lid for ramp access Steel scraper Fully functional If you have any questions or require further information, please do not hesitate to contact us.

Year of construction: 1989, condition: ready for operation (used), Max. Operating pressure: 20 bar, max. temperature range: 120°C. Hnodpfx Aetphubsbkeu

Year of construction: 2024, condition: like new (used), functionality: fully functional, Cream cooker "Creamco" with 80 litre bowl, demonstration model (year of manufacture 2024) with warranty, almost as good as new, only used for demonstration purposes, for puddings, batters, creams, fillings, cooked and boiled items and much more, with multi-walled stainless steel container, easy (tool-free) removal of stirring tool including plastic scrapers, digital thermostat and timer. Mobile machine, made entirely of stainless steel, with triple wall for optimum heat insulation and even heat distribution, including side and bottom scrapers. Includes removable lid with separately closable filling opening. Also perfect for making or preparing sensitive products such as choux pastry, baking cream, chocolate, fondant, fruit jam, coatings, fillings, and similar products that require even heating and mixing/stirring. There are 2 stirring speeds to choose from, as well as stirring without heating, e.g. for pre-mixing ingredients or cooling. Manual or automatic operation via digital thermostat and timer. The kettle can be easily tilted using a crank handle to remove the product, even by more than 90 degrees, making cleaning relatively easy. AVAILABLE NOW! Technical data: Capacity: 80 litres, maximum filling quantity approx. 50 litres, recommended minimum filling quantity: approx. 7 - 10 litres, max. temperature: 150°C, thermal oil volume: 19.5 litres, heating power: 9 kW, agitator motor power: 0.6 kW / 0.8 kW (1st / 2nd speed), connection values: 400 V - 3Ph - 50Hz, approx. 10 kW, 32A CEE plug Hodoyugb Nspfx Abkjnu Dimensions: approx. 96 x 74 x 165 cm (W x D x H), filling height: approx. 127 cm, weight: approx. 160 kg

Condition: good (used), Finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: Homag, profile scraper from edge banding machine BRANDT KM 36 / KM35 -Quantity: 1 piece available -Dimensions: 510/430/H570 mm -Weight: 62 kg Hnedpfx Asgylq Sobksu

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 202.03.008.17, functionality: fully functional, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 12 m/min, total height: 1,693 mm, total length: 4,620 mm, total width: 1,200 mm, Equipment: CE marking, documentation/manual, FORMAT4 Tempora F800 60.08 e-motion Edgebander Manufacturer: FORMAT4 / Felder Group Model: Tempora F800 60.08 e-motion Year of manufacture: 2017 Serial number: 202.03.008.17 Location: Slovenia Well-maintained FORMAT4 Tempora F800 60.08 e-motion edgebander in very good technical condition. The machine has processed approximately 63,000 linear meters. It is fully operational, regularly maintained, and ready for production. The machine is currently connected and can be inspected and tested while powered on. Technical data: - Feed speed: 12 m/min - Workpiece thickness: up to 60 mm - Coiled ABS/PVC edge thickness: 0.4–3.0 mm - Strip edge material: up to 8 mm - Electrical connection: 400 V / 50 Hz / 3-phase Hnodpfjztbutex Abkju - Rated power: 11 kW - Rated current: 28 A - Required compressed air pressure: 7 bar Overall dimensions: - Length: approx. 4,620 mm - Machine width without extended front support: approx. 1,200 mm - Height with safety hood closed: approx. 1,693 mm - Required operating depth with front support extended: approx. 1,775 mm - Height with safety hood open: approx. 2,068 mm Equipment: - Pneumatic-mechanical workpiece stop at the infeed - Premilling unit with replaceable cutters - Premilling working height up to 64 mm - Infrared heating lamp - EVA glue pot - Reversing function of the glue roller - e-motion end-trimming unit with two motors - Pneumatically tilting end-trimming saws, adjustable from 0° to 15° - Tandem copying unit - Rondomat corner-rounding unit for edge thicknesses from 0.4 to 3 mm - Motorized positioning of the Rondomat unit - Radius scraper unit with pneumatic activation - Flat scraper unit for nesting applications - Release agent spray unit - Sliding agent spray unit - LED interior working lights The machine is being sold due to investment in a newer edgebander. Availability is by agreement. Dismantling, loading, and transport are at the buyer's expense unless otherwise agreed. Please contact me through Machineseeker for further information, additional photos, a video demonstration, or to arrange an inspection.

Year of construction: 2012, condition: used, functionality: fully functional, PERMOLEX-POLAR K 81 H – a complete process line for de-oiling and separating metal chips. For sale is a complete industrial system for de-oiling, oil removal, and separation of aluminum and steel chips. Type: Permolex-Polar K 81 H Year of manufacture: 2012 Application: de-oiling and separation of loose aluminum and steel chips Capacity: max. approx. 3.4–6 m³/h Throughput: approx. 160 tons of chips per month Control: Siemens SIMATIC S7-300 / operator panel TP177B Rotational speed: 980 rpm Power supply: 400 V / 50 Hz Offered for sale is a complete set of equipment forming an industrial system for centrifuging liquids from chips and further separating aluminum and steel chips. The process includes: chip feeding → buffer tank → conveyor → PERMOLEX-POLAR centrifuge → oil/coolant discharge → magnetic separation → chip separation → transport to containers. Chip transfer points are enclosed, which reduces the lifting of material during transport. The system includes: • PERMOLEX-POLAR K 81 H chip centrifuge, Hedjz Hw R Uopfx Abkonu • approx. 7.5 m³ buffer tank for chips, • 3 x KF 600 scraper conveyor, • double separating shaft with neodymium magnets, • vibratory conveyor, • approx. 250 l oil/coolant tank, • submersible pumps, • floor trays, • complete Rittal control cabinet, • Siemens S7-300 controller, • TP177B operator panel, • supporting structures and system components. Application The system is designed for the continuous processing of a mixture of aluminum and steel chips. The process includes: chip feeding → de-oiling/oil removal → separation of steel fraction → transport of separated chips to tanks/containers. The system is designed for handling large quantities of material and features automatic control and level monitoring. Technical condition Used equipment from an industrial installation. The photos show signs of normal operation, dirt, and surface wear on the components. It is recommended to inspect and verify the completeness and technical condition of individual components before purchase. Sold as a complete system or individually, as agreed. Due to its size and complex structure, dismantling, loading, and transport require prior agreement. Technical/design documentation regarding the equipment layout can be provided to interested buyers. 📞 Contact Interested parties are invited to contact us for pricing, additional photos, technical documentation, and to arrange an inspection.

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: AB00040876, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 550 kg, Equipment: CE marking, documentation/manual, Automatic edge banding machine SCM ME 40TR in CE version, manufactured in 2026. Equipped with a glue pot and features compliant with European directives, including a rectifying unit and a special rounding saw unit. Features include: a saw unit with an automatic on/off system, a scraper with an automatic on/off system, a brushing unit, a glue scraping unit with an automatic on/off system, an automatic strip feed system with a magazine, a glue pot for polyurethane adhesive with rapid discharge, an infrared lamp, an anti-stick unit, a spraying system for finishing the edge band, a “Nesting” copy unit for the routing unit and for the edge band scraper, and internal lighting. The optional edge band scraping unit is designed for processing edge bands thicker than 1 mm. Hedpfxsz Nlmqo Abkonu

Condition: excellent (used), functionality: fully functional, 3000L paddle mixer with column loading system | Double-shaft mixer for meat and fillings Hnjdpoz Rq Hrsfx Abkou Type: Double-shaft paddle mixer Bowl capacity: 3000 liters Mixing system: Double paddle shaft Discharge system: Pneumatically/hydraulically operated bottom/front flap Loading system: Integrated column lift This 3000-liter double-shaft paddle mixer is a highly efficient machine designed for continuous industrial operation. It is suitable for use in large meat processing plants, butcher shops, delicatessen facilities, ready-to-eat food factories, and in the pet food and vegetable processing industries. It is designed for mixing, standardizing, and gently kneading various types of meat fillings, finely and coarsely ground sausages, salads, dumpling fillings, or vegetable mixtures. The core of the machine is a double paddle shaft system with specially shaped scrapers, which ensure fast, uniform, and thorough mixing of the entire batch without damaging the raw material's structure. The counter-rotating motion of the paddles eliminates dead zones in the bowl, allowing for optimal distribution of spices, brines, and functional additives. The integrated column lift enables the automation of the loading process. The machine features a robust construction that prevents vibrations during operation with heavy loads. The appropriately shaped bottom of the chamber, combined with the pneumatically operated discharge flap, allows for quick and hygienic discharge of the finished product directly into a buffer, unloader, or onto a conveyor belt.

Condition: used, Year of construction: 2019, Used machine Hjdpfx Aezpzy Isbkjnu Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: good (used), Stephan UMC12-F Universal machine Stainless, Bowl capacity 12L, jacketed bowl, with vacuum, variable speed, with Haake D8 circulating waterbath, top mounted bowl scraper, on mobile stainless frame, 3Ph Hnjdpfoz It Ilsx Abkou

Condition: used, Year of construction: 2014, functionality: fully functional, Travel ranges Travel distance X-axis [mm] 760 Travel distance Y-axis [mm] 530 Travel distance Z-axis [mm] 560 Hjdpfx Aez Dttgebkenu Distance from spindle bottom edge to table [mm] 150-710 Work table Table length [mm] 900 Table width [mm] 500 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 500 Feed Rapid traverse X- and Y-axis [m/min] 40 Rapid traverse Z-axis [m/min] 36 Max. axis acceleration X-axis [m/sec²] 6 Max. axis acceleration Y-axis [m/sec²] 5 Max. axis acceleration Z-axis [m/sec²] 5 Max. feed force X-axis [kN] 6.951 Max. feed force Y-axis [kN] 6.951 Max. feed force Z-axis [kN] 11.31 Diameter of ball screw X- and Y-axis [mm] 45 Diameter of ball screw Z-axis [mm] 45 Main spindle Main spindle speed min. [1/min] 30 Main spindle speed max. [1/min] 12,000 Main spindle power [S6-40% duty cycle kW] [kW] 25 Main spindle torque max. [Nm] 159 Tool holder SK 40 DIN 69871 A Tool magazine Number of tool magazine positions 30 Tool change time chip-to-chip [sec] 4 Max. tool diameter [mm] 76 Max. tool diameter with adjacent space available [mm] 125 Max. tool length [mm] 280 Max. tool weight [kg] 7 Coolant system Coolant tank volume [l] 300 Through-spindle cooling pressure [bar] 3.5 Through-spindle cooling [l/min] 60 Internal coolant supply pressure [bar] 20 Internal coolant supply [l/min] 25 Chip flushing pressure [bar] 3.5 Chip flushing [l/min] 60 Coolant spray gun yes External compressed air supply yes Separate oil cooler for main spindle yes Oil cooling circuit [l] 100 Separate air supply for main motor yes Basic machine data Installation area width [mm] 2,540 Installation area depth [mm] 2,600 Machine height [mm] 2,930 Weight of basic machine [kg] 6,400 Electrical connection power [kVA] 25 Required pneumatic connection [bar] 6 Required compressed air [l/min] 300 Control system Manufacturer Heidenhain Control system type iTNC 530 HSCI with SmarT.NC Chip disposal Internal screw conveyor 2 Scraper belt conveyor to the outside 1

Condition: excellent (used), Year of construction: 2023, Biesse Akron 1330 A Edgebander Single-sided edgebander AKRON 1330-A Gluing Unit SP03 End trimming Unit IT03 Fine trimming Unit RF02 Corner rounding Unit AR02 PRE-MILLING UNIT RT02 Symmetrical diamond tools H=45 mm Z=2+2 30° included. EDGE SCRAPER RB02 Tools are not included. GLUE SCRAPER UNIT RC02 BRUSHING UNIT SZ02 SUPPLEMENTARY LATERAL PANEL SUPPORT KIT FOR THE INSTALLATION OF THE PANEL RETURN SYSTEM MANUAL INFEED SYSTEM FOR NARROW PIECES KIT FOR PROCESSING "SHADOW LINE" PROFILE PANELS STRAIGHT AIR TABLE AT THE MACHINE INFEED ANTIADHESIVE UNIT ADZ02 PAIR DIAMOND-COATED MILLING CUTTERS H=65 mm Z=2+2 30°.In replacement of standard tools. HYBRID GLUING CHUCK FOR GRANULATED EVA/PUR GLUE INSTEAD OF THE STANDARD SYSTEM TM15 HYBRID PREMELTER FOR EVA/PUR GLUE ADAPTIVE INFRA RED LAMP AdIRL-700 AX-4, NC AXIS ON FINE TRIMMING UNIT PRO-NESTING KIT FOR FINE TRIMMING UNIT Pair of multiprofile milling cutters for fine trimming unit: chamfering 25 degrees, R=2 mm + R=1 mm, straight profile for solid wood AX-2, NC AXIS ON CORNER ROUNDING UNIT ROUNDING FUNCTION ONLY SLIDING UNIT FOR CORNER ROUNDING UNIT Pair of milling cutters, R=2 mm, for corner rounding unit Pair of milling cutters, R = 1 mm, for corner rounding unit AX-4, NC AXIS ON EDGE SCRAPER PRO-NESTING KIT FOR EDGE SCRAPER UNIT Pair of knives R=2 mm, for edge scraper Pair of knives R=1 mm, for edge scraper CLEANING UNIT LPT02 Hodpsyyb Icjfx Abkenu (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,174 h, product length (max.): 4,770 mm, This HOMAG KDF 230 edgebander was manufactured in 2014. It has processed a total of 65,428 workpieces and 108,908.92 meters of edge length. The machine features a digital touchscreen control panel and a multi-flexible overhead dust extraction system. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KDF 230 machine we have for sale. Contact us for further details. - Total Operating Hours: 1174:30.12 h- Total Workpieces Processed: 65,428 Stck- Total Edge Length Processed: 108,908.92 m- Application Unit Temperature: 190 °C (Target), 76 °C (Actual)- Feed Speed: 11 m/min- Working Height: 950 mm- Pneumatic Connection: min. 6 bar- Overall Machine Length: 4,770 mm- Workpiece Width min.: 70 mm (at 8-22 mm thickness), 120 mm (at 23-40 mm thickness), 150 mm (at 41-60 mm thickness)- Workpiece Overhang: 38 mm- Workpiece Thickness: 8 - 60 mm- Edge Material Roll: 0.4 - 3 mm (max. cross section 135 mm² for PVC, 100 mm² for veneer, roll diameter max. 830 mm)- Edge Material Strip: 0.4 - 6 mm (max. cross section 165 mm²)- Control System: EasyTouch 2- Operating Voltage: 400 V / 3Ph / 50Hz- Joint Trimming Unit: 2 x 2.2 kW, 200 Hz with DIA cutter set (100 x 65 x 30 mm, Z=3, max. workpiece thickness 60 mm)- Gluing Unit: Standard A6 with workpiece pre-heater and quick-change application unit (suitable for Granulate / PU)- End Trimming Unit: 2 x 0.18 kW, 200 Hz, 12,000 rpm (swivel range 0-15 degrees) with pneumatic adjustment- Fine Trimming Unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm with pneumatic adjustment (chamfer/radius/straight), DFC combination cutters, and multi-roller sensing - Corner Rounding / Form Trimming Unit: 1 x 0.35 kW, 200 Hz, 12,000 rpm (max. edge thickness 3 mm, max. workpiece thickness 60 mm, min. workpiece length 250 mm) with structural floor attachment- Profile Scraper Unit: Quick-change heads, pneumatic adjustment, and special multi-roller sensing- Glue Joint Scraper Unit: Included with top/bottom tracing and dust extraction- Buffing Unit: 2 motors x 0.09 kW, tilt and height adjustable- Pressure Line: Smooth PU top pressure rollers- Additional Features: Hood internal lighting, feed fence extension (+300 mm), automatic edge infeed (KDX 1210/1400) Technical Specification Feed Speed 11 m/min Hnodpfozzwhfsx Abkeu

Condition: used, Year of construction: 2013, Manufacturer : OLSA Model : Fusore CP 1000 Year : 2013 Type : Melter Vessel : Total volume: 1,130 L Operating temperature: −10 to +95 °C Pale anchor-type agitator + scrapers Bottom-mounted dissolver Number of scrapers: 3 Pressure: atmospheric Jacketed : Volume : 55 L Operating temperature: −10 to +95 °C Pressure : 0 - 4 bars Atmospheric pressure Skid: CIAT plate heat exchanger + pump: Year : 2013 Model : PWB8 11 025H00 Min./max. permissible temperature (TS): 0 / 110 °C Min./max. permissible pressure (PS): 0 / 10 bar Test max. pressure (PT): 15 bar Electrical cabinet with PLC + HMI Hedpfezxifqsx Abkjnu Technical Data available  

Condition: good (used), Year of construction: 2011, machine/vehicle number: AH005553, functionality: fully functional, total length: 8,100 mm, overall weight: 4,000 kg, Main specifications: * Panel thickness: max. 60 mm * Edge thickness: 0.4 - 3 mm (Solid wood up to 12 mm) * Feed speed: up to 25 m/min * Glue system: EVA / PUR Configuration: * Pre-milling unit Hnjdpjzvb Uxsfx Abkeu * Gluing unit with pressure rollers * End-trimming unit * Top/Bottom trimming unit (rough & fine) * Corner rounding unit * Radius edge scraper * Glue scraper * Buffing unit Machine Condition: * Excellent working condition. * Regularly maintained. * Available for inspection and testing while powered on.

Condition: used, GRIESER Hnsdpfx Aozix Ehjbkju Type: VPL 3.0 Total volume of the mixing chamber: 3.0 liters Usable volume: 0.3 to 2.0 liters Pressure in the mixing chamber: 0 to 1.2 bar (absolute) Pressure in the stainless steel double jacket: N/A Critical speed: 1800 rpm Speed range under load: Impeller mixing tool: 38-282 rpm Scraper: 9-90 rpm Rated voltage: 3/PE/50Hz, 400V L/PE/N/50Hz, 230V Control voltage: 24V DC Power: 1.3 kW Rated current: 5.0A Main switch: 32A Fuse: 16A Weight: 250 kg Sold from our location! Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We offer you: CNC machining center, universal, with pallet automation Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: Machine 2023 / Automation 2025 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4020 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Scraper-type chip conveyor with cleaned filter screen - Internal coolant supply (IKZ) 40 bar, consisting of: - Paper band filter - 600 l tank - Cabin roof - Rotary through-feed in the spindle - Double filter - Blow-off air through the spindle center - Rotating viewing window - Flushing gun for chip removal - Oil and emulsion mist separator - Infrared measuring probe, manufacturer Heidenhain TS 460 (if available) - Tool measurement system, manufacturer Heidenhain TT160 (if available) - Preparation for 3D quickSET - Automation interface PH Cell, consisting of: - Interface - 4-channel rotary through-feed - Automatic loading door - Operating mode 4 - Tracy surface interpolation - Pallet loading and unloading system PH 150, consisting of: - 10-position pallet storage - External electronic handwheel (if available) Hjdsz A A Dxopfx Abkenu Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to change and errors in the technical data and information, as well as prior sale!

Year of construction: 2006, condition: used, Manufacturer: Terlet Hnodoz E R Hgopfx Abkju Model: stirring kettle Year: 2006 Condition: Used Serial number: 0511170-001-001/002 Stock number: 3423 Capacity: 2 x 1000 liters Heating: thermal oil Infeed height: 1950 mm Outfeed height: 1050 mm Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 8.6kW (2x) Dimensions: 2900 x 5700 x 2600 mm Weight: 2 x 1500 kg 2x tilting stirring kettles with scraper agitator. Includes Endress + Hauser Promag P flowmeter. Includes Carnitech L25-1-4209 mobile lift for standard containers, year 2006.

Condition: used, Year of construction: 2017, operating hours: 3,500 h, Equipment: Base package AK635 Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 25,000 kg Hydraulically adjustable support leg Splash guards (inner and side fenders) Mercedes-Benz diesel engine OM502LA, 440 kW at 2,000 rpm, compliant with EUROMOT IIIB emission standard Load-dependent feed control including automatic scraper floor reversal Separate drives for feed roller and scraper floor (twin drive) Fuel tank 750 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted toothed segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: flail tip “Streusel” Additional hydraulic connection 20 l/min Centrally arranged wear strips Electric pump for operating cylinder functions (e.g. raise/lower support leg and open/close rear basket, fold/unfold rear conveyor, release drive) when the engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket with flap (mesh size from 30 - 280 mm, gradation on request) Rear conveyor: belt length 6,150 mm, belt width 1,500 mm, discharge height 4,500 mm, hydraulically foldable, with anti-magnetic centre section Lower conveyor: belt length 1,700 mm, belt width 1,400 mm Scraper floor with 34 slats Radio remote control incl. transmitter, receiver, 230 V charging station, 12/24 V charging cable, transmitter bracket. The following functions can be controlled: engine stop, engine speed +/-, material feed: on/off/reverse, fine shredding basket: open, rear/lower conveyor: on/off, feed roller: reverse, scraper floor stop/reverse/forward, support leg: raise/lower, drive preparation: stop/reverse/forward/release Drive preparation Acoustic start-up warning Paint finish: RAL2011 deep orange Fine shredding basket 60 mm Optional equipment: Impact plate with impact bar Overband magnet -Neodymium- Frame for overband magnet Smooth feed roller Hjdpfx Abey D Nktekjnu Scraper floor with cleaning holes Delivery date to be agreed

Condition: used, Chip conveyor, scraper conveyor with coolant tank, BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Width of metal links: 200 mm Distance between carrier bars: approx. 380 mm Length of possible chip discharge: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width at the top: 400 mm Hopper width at the bottom: 170 mm Conveying height – discharge height: approx. 1250 mm Motor power, belt drive: 0.37 kW Hnedpohwt H Aefx Abkju Mains connection: 400 volts, 50 Hz - Drive of the scraper chain via geared motor - Coolant tank without coolant pump Space requirement L x W x H: 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for the chip transport of a milling machine, lathe, or machining center.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, Wendelmixer Diosna W401A - machine for 400 kg of dough - 2 speeds - control panel with program memory - 4 bowls - machine after refurbishment, in excellent condition - year of manufacture 2012 + Diosna HK1200 dough tipping device with drive and bowl scraper Hnjdpfx Asztz E Eebkeu - complete with safety cage - year of manufacture 2020

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Hedpfoxix Hxjx Abkjnu Manufacturer: Felder Model: Tempora 60.06, F600 Year of manufacture: 2019 Fully automatic operation from the control panel. Jointing unit: Yes End trimming unit: Yes Radius milling unit: Yes Radius scraper: Yes

Condition: ready for operation (used), DMN GS-150 Rotor: stainless steel (scraper blades) Housing: steel 2.5 liters per revolution 20 rpm Motor: 0.37 kW Fpjcmsz Rpn Uo E Tipren 1380/20 rpm Hnedpfoz Rpraox Abkeu 1.24 A 2 units available Note: older BL-150 model with DN150 flange, PN6 flange size.