Used Scraper for sale (644)

Year of construction: 2023, condition: ready for operation (used), Two Vecoplan scraper chain conveyors are available. 1) VKU 800, year of construction: 2023, drive power: 5.5kW, belt speed: 24m/min, conveying capacity: approx. 120m³/h, belt width: 820mm, max. incline: 70°, section length: 10.2m. 2) VKU 1100, year of construction: 2023, drive power: 11kW, belt speed: 24m/min, conveying capacity: 180m³/h, belt width: 1150mm, max. incline: 70°, section length: 22mm. Documentation available. On-site inspection is possible. Itjdpfx Alst Iw Ryotsk

Year of construction: 2022, condition: ready for operation (used), A Ruez cooling lubricant system as good as new is available. Capacity: 34720l, filling volume: 32710l, usable volume: 22020l + clean tank volume: 6000l. Level indicator: OWE 2C, inlet/distributor: screen basket, machine dimensions X/Y/Z: approx. 7400mm/2800mm/6000mm. Including integrated sludge scraper and chip conveyor. Including two-part Ruez lamella separator, Ruez safety trough, clean tank, Ruez magnetic roller filter, chip cart superstructure. Without belt filter and sediment system. Documentation available. On-site inspection is possible. Iodpfsudm Dtjx Altotk

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Iodpfx Alezf Nbxetstk

Condition: ready for operation (used), Year of construction: 2008, Offered is a CNC horizontal milling machine. Working area X/Y/Z: 1000mm/800mm/850mm, pallet size: 630x630mm, table load: 1300kg, B-axis indexing: 0.001°, spindle speed: 6000rpm, spindle power: 30kW, spindle torque: 600Nm, tool holder: SK50, magazine positions: 120, spindle internal cooling pressure: 70bar, pump capacity LD: 150l/min at 3bar, pump capacity MD: 40l/min at 7bar, pump capacity HD: 32l/min at 70bar, cooling capacity cooling unit: 11.8kW, control: FANUC 31iMA. Equipped with additional pallets with threaded grid (24xM16 in 125mm grid), direct absolute scales, spindle internal cooling system, automatic scraper belt chip conveyor with 1000l dirty water fine filtration, recirculating chiller, washing shower, mist extraction system, touch probe. Weight: approx. 18500kg, overall dimensions X/Y/Z: approx. 6800mm/4200mm/3400mm. Inspection possible by arrangement. Ijdpfoy T N H Hex Altjtk

Year of construction: 2001, condition: ready for operation (used), A paving stone production line Omag, which has been continuously optimized and upgraded to the latest technical standards, is available. Overhauls: 1) Conversion for an additional hydraulic unit for additional load in 2020. 2) Conversion to servo-vibration with Siemens S7 control in 2016. 3) Conversion to digital path measurement of mould and ram in 2017. 4) New core filling carriages in 2017. Plant components: 1) Board destacker and board stacker including roller conveyor. 2) Board feeder (advance) and board conveyor (scraper) to the lifting frame. 3) Board turner. 4) Horizontal and vertical bundling units Ridder & Signode, years of manufacture: 1994 and 1983. 5) Trafo lifting platform including motors and without control, year of manufacture: 1983. 6) Doppler including hydraulic unit, year of manufacture: 2004. 7) Stone packer Omag K1400 including hydraulic unit, year of manufacture: 1997. The line has no base boards. 8) Stone finisher Omag S22 140-90, year of manufacture: 2001. Documentation available. An on-site inspection is possible. Iodpfx Aljw R Uzijtstk

Year of construction: 1994, condition: ready for operation (used), A Thyssen Henschel intensive mixer with an AEG motor is available. Volume: 1000l, double jacket volume: 95l, max. operating temperature: 200°C, permissible operating pressure: 5bar, speed: 532rpm, motor type: KA7318M-BB059-Z, power: 184kW. Including tools type FM, floor scraper and fluidizing blades. On-site inspection is possible. Itedpfowv Umqex Altjk

Condition: ready for operation (used), Year of construction: 2007, A CNC machining center Chiron factory-overhauled by the manufacturer in 2017 is available. Travel path X/Y/Z: 450mm/270mm/310mm, NC head swivel: -20°/115°, tool positions: 40, tool holder: HSK-A40, speed: 15000rpm, control: Siemens 840D, operating hours: approx. 22500h. Including rotary table package AWU 160 with D105, collet chuck, handling, bar feeder Irco SiMag 100.1-3000, through-coolant preparation, scraper belt conveyor (1050mm), duplex filter Mahle, vacuum rotary filter Knoll VRF 400, approx. 500 tool holders HSK-A40 and various spare parts. Documentation vorhanden. An inspection on site is possible. Ijdpoyn Nz Eofx Altetk

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 21071601, input voltage: 380 V, power: 6.05 kW (8.23 HP), Sinmag mixer, entirely made of stainless steel, with a 100L capacity. Itedpfozpfnpex Altok Equipped with a bowl, a whisk, a spiral beater, a paddle, and 1 scraper.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 2,700 mm, total width: 1,950 mm, overall weight: 7,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25,000 W, product length (max.): 3,308 mm, number of axes: 3, This 3-axis DECKEL MAHO DMP 60V was manufactured in 2003. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 425 mm. The machine is equipped with a spindle speed range of 20 to 18,000 rpm and a tool changer with 25 magazine positions. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMP 60V vertical machining centre we have for sale. Contact us for further details. Itjdpfx Aleznc T Hjtjk - Control Unit: Siemens 840D / SINUMERIK 840D powerline- Spindle Speed Range: 20 to 18,000 rpm- AC Main Drive Power: 35/25 kW (40/100% ED)- Tool Changer / Capacity: 25 magazine positions- Tool Holder Taper: HSK-A 63- Worktable Type: Swivel / Pallet Changer- Clamping Surface Area: 2x 660 x 400 mm- Internal Coolant Supply (IKZ): 40 bar / 23 l/min / 600 L tank- Coolant / Filtration System: Interlit Kompakt-Filteranlage (Type: SPB 3/600, Filter surface: 0.7 m², Tank capacity: 600 l, YOM: 2003) with gravity paper belt filter unit- Coolant / Chip Management: Scraper belt chip conveyor (1000 mm discharge height) with auxiliary 200 L coolant tank- Accessories: Electronic handwheel, integrated blow-off/spray gun attached to front cabinet- Machine Dimensions (Height): 2700 mm (Machine height), 2645 mm (Transport height)- Machine Dimensions (Width): 1950 mm (Without control panel), 2990 mm (With control panel / door open), 1950 mm (Transport width)- Machine Dimensions (Length): 3308 mm (Machine length), 3850 mm (Transport length with swivelled control)- Required Floor Area: 6000 x 4000 mm (Standard), 6000 x 5200 mm (With chip conveyor), 6000 x 5300 mm (With chip conveyor and coolant system)- Transport Dimensions (L x W x H): Approx. 3400 x 2000 x 2700 mm- Documentation Included: Machine Handbook

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,243 h, spindle speed (max.): 20,000 rpm, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle motor power: 35,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 75 monoBLOCK was manufactured in 2017. It features a Siemens SINUMERIK 840 D control system and a high-pressure pump for internal coolant supply at 20 bar. The machine includes a 3D measuring probe from Heidenhain and has 60 magazine positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 monoBLOCK universal machining centre we have for sale. Contact us for further details. - Spindle Power: 35 kW (40% duty cycle), 25 kW (100% duty cycle)- Tool Taper: SK 40 according to DIN 69871 (Optional HSK-A 63 according to DIN 69893)- Tool Magazine: Chain magazine with double gripper, 60 tool pockets (SK40 / HSK-A63)- NC Swivel Rotary Table: Integrated in rigid table, 800 mm x 650 mm- Control System: CELOS with Siemens 840D sl Operate, including 21.5" ERGOline Control with Multi-Touch Screen- Features: MPC (Machine Protection Control), Chip flushing, Integrated coolant tank 500 l- Coolant / Chip Disposal included: * Production Package: Scraper belt chip conveyor with coolant system 600 liters, paper band filter, discharge height 950 mm, width 670 mm * Internal Coolant Supply (IKZ): 40 bar / 20 l/min through spindle center (AD) * External Coolant Supply: 4 bar / 40 l/min * Washdown Pistol with pump (2 bar / 10 l/min) * Oil and Emulsion Mist Extraction System: Mechanical filter, airflow rate 600 m³/h- Measuring / Monitoring: * Infrared Measuring Probe: Heidenhain TS 649 (SK40 / HSK-A63) * 3D quickSET: Tooling check and inspection of kinematic accuracy for 4/5-axis machine configurations Technical Specification Through-spindle Coolant Yes Taper Size SK 40 Iedezdzmwjpfx Altjtk

Condition: new, Year of construction: 2026, machine/vehicle number: N2097535010017, Basic machine G350 access-SERIE - FACTORY | NEW MACHINE - Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 770.0 mm Travel path of the Z-axis 805.0 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector 800 m³, filter class ISO ePM1 80% Stainless-steel internal work area enclosure HEIDENHAIN TNC 640 with GROB4Pilot access Control panel at tool loading and unloading position Tilting table unit (A'-axis) Itodpfx Aleqqi Dkjtsk Rotary table with T- slots (B‘- axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication Compact double disk-type magazine HSK-A 63 with 90 tool pockets Tool cleaning device Electromechanical tool breakage detection device Scraper conveyor , discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) machine cooling unit with air- cooled cooling unit (4 kW) Compressed air feed through spindle center Air gun at the work area Flush gun at the work area Flushing unit (Z- axis) Compressed air cleaner bar for safety screen in work area door Rotary distributor in B'-axis rotary table with hose installation Remote machine diagnostics with access control switch 12 month warranty

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Ijdpey Urtfsfx Altstk Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Iodpfxovvkd Ts Altotk

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Iedjvvkfdjpfx Altjtk

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Isdpfxjvvkfqo Altstk Storage location: Nattheim

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Itodpsxyiilsfx Altjk

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Isdet Ac Efjpfx Altotk Very good condition

Condition: excellent (used), Year of construction: 2001, x-travel 2200 mm y-travel 3200 mm z-travel 1250 mm Control FIDIA C20 c-axis +/- 200 ° milling-head swivable +/- +90 ° Isdpfx Aexa Hl Roltetk milling-head swivable +/- -100 ° feeds X-axis 50 m/min feeds Y-axis 50 m/min feeds Z-axis 50 m/min tool taper HSK A63 tool change unit 16 Pos. spindle turning speed range 18000 U/min distance between columns 4060 mm dist. milling spindle - table surface 1796 mm connected load 238 kVA weight of the machine ca. 45 t dimensions of the machine ca. 9 x 7 x 5 m This JOBS LinX6 is in very good condition and can be viewed under power by arrangement with the seller. Description: Jobs LinX6 Type: 5-axis milling machine with movable gantry and fixed table Control: FIDIA C20 Year of manufacture: 2001 Travel X: 2200 mm Y travel: 3200 mm Z travel: 1250 mm A-axis travel: +90° / -100° C-axis travel: +200° / -200° Max. feed rate in X/Y/Z: 50 m/min Table clamping surface: 4000 x 2500 mm Clearance between columns: 4060 mm Clearance height between table and portal: 1807 mm Clearance height between table and spindle nose: 1796 mm Milling head: T2K D.01.06 Tool holder: HSK A63 Tool changer: 16-fold Spindle power: S1 from 6800 rpm 40KW Spindle speed: 250 - 18000 rpm Total connected load: 238 kVA Special equipment: - Siemens linear motors in all axes - JIMS / preparation for semi-automatic motor spindle change - Replacement spindle as spare part - External coolant supply / 1000L tank - Minimum quantity coolant dosing - Scraper conveyor - Renishaw TS27 tool measuring system - Ethernet connection - Manual control module Other: Complete documentation available Machine weight: approx. 45 tonnes Space requirements: 8.7 m (width) x 6.7 m (depth) x 5.1 m (height)

Condition: excellent (used), Year of construction: 2000, x-travel 2500 mm y-travel 800 mm z-travel 750 mm Control HEIDENHAIN TNC430i table dimension - longitudinal 3220 mm table dimension - cross 800 mm tool taper ISO SK40 spindle turning speed range 15000 U/min connected load 25 kVA tool change unit 40 Pos. weight of the machine ca. 20 t dimensions of the machine ca. 6,5 x 3,8 x 3,7 m This HEDELIUS BC80 is in good condition and can be viewed under power by arrangement with the seller. Description: Designation: Hedelius BC80 Type: 4-axis machining centre Control: Heidenhain TNC430i Year of manufacture: 2000 Travel distance X: 2500 mm Travel distance Y: 800 mm Itedpfxjxa Hl De Altsk Travel distance Z: 750 mm Table clamping surface: 3220 x 800 mm Tool holder: SK40 Tool changer: 40-fold Spindle power: 10 kW S1 / 15 kW S6 Spindle speed: 50 to 15,000 rpm Total connected load: 25 kVA Special equipment: - Partition wall for pendulum machining - Internal coolant supply - 4th axis Hoffmann with counter bearing, hydraulically clamped - Belt filter - Scraper belt chip conveyor - Flushing guns - Renishaw TS27R tool measuring system - Renishaw infrared workpiece measuring system - Ethernet connection - Hand-held control module Other: - Ball screw drive in X and Y replaced in 2018 - Complete documentation available Machine weight: Approx. 20 t Space requirement: 6.5 (width) x 3.8 (depth) x 3.7 m (height)

Year of construction: 2021, condition: good (used), functionality: fully functional, machine/vehicle number: 221-0404, Please refer to the images for the description. Manufacturer: JAUDT Dosiertechnik Maschinenfabrik GmbH Type: 6305 (scraper wheel lock) Year of manufacture: 2021 Order number: 221-0404 Serial number: 0463888 Dimensions: 350 × 350 mm (according to drawing ZSR 350x350/670) Isdpfx Alszhmiljtotk Weight: approx. 350 kg Motor: SEW-Eurodrive DRN100L8, 1.1 kW, IE3 Complete documentation in German is available. If you have any questions, please do not hesitate to contact us.

Condition: new, This listing is for informational purposes only and does not constitute a legally binding offer. The ultra-light straight snow blade features a compact, lightweight design, making it ideal for winter maintenance of agricultural land as well as municipal areas such as clearing yards, walkways, parking lots, and residential streets. The low dead weight allows it to be used with carrier vehicles of low engine power. The scraper bar is available either in wear-resistant steel or rubber. Blade angle adjustment is manual in one of five positions (optional hydraulic adjustment directly from the driver's cab via a hydraulic cylinder). The plough is equipped with a support leg. 1500 mm Working width: 1500 mm Length: 910 mm Width in working position: 1470 mm Height: 630 mm Weight: 136 kg Sheet thickness / blade profile: 4 mm Number of rubber blade segments: 3 pcs. Price: 1000 € net 1190 € gross 1800 mm Working width: 1800 mm Length: 910 mm Width in working position: 1750 mm Height: 630 mm Weight: 148 kg Sheet thickness / blade profile: 4 mm Number of rubber blade segments: 4 pcs. Price: 1100 € net 1309 € gross 2000 mm Working width: 2000 mm Length: 910 mm Width in working position: 1930 mm Itjdpoyk Tvfofx Altek Height: 630 mm Weight: 156 kg Sheet thickness / blade profile: 4 mm Number of rubber blade segments: 4 pcs. Price: 1200 € net 1428 € gross

Condition: new, functionality: fully functional, power: 26.48 kW (36.00 HP), color: red, overall weight: 2,800 kg, Year of construction: 2024, operating hours: 1 h, Equipment: 4 in one shovel, all wheel drive, cabin, pallet forks, We deliver machines to any European country! The FARMER 811 PRO wheel loader is one of our most popular models. We have been selling it for 10 years, meaning that hundreds of satisfied customers rely on it. Equipped with a 4-cylinder, 36 HP engine and a 2-speed transmission, this is a reliable machine for all industries. Its strong and robust design ensures operation under all conditions. TECHNICAL SPECIFICATIONS: - Manufacturer: KINGWAY DEUTSCHLAND e. K. - Model: 811 PRO - Full cab with heating, ventilation, road and work lighting, rear-view camera, radio - Hydraulic quick coupler - Suspension seat ENGINE DETAILS: - Engine: Yunnei DEF20NJF4 - Diesel - Cylinders: 4 - Emission standard: Euro 5 - Max. rated output: 18.2/25 kW / 25/36 HP at 2,800 rpm - Max. torque: 66.9 Nm at 1,600 rpm - Cooling system: Water-cooled - Noise level: 101 dB - Power supply: 12V - Battery: 12V / 120 Ah DRIVE: - Drive unit: Torque converter (2 driving ranges) - 4x4 wheel drive - Travel speed (range 1): 0-8 km/h - Travel speed (range 2): 8-20 km/h CAPACITIES AND PRESSURES: - Fuel tank capacity: 40 liters - Hydraulic oil tank capacity: 55 liters - Max. hydraulic oil flow: 48 L/min - Max. hydraulic pressure: 180 bar WEIGHTS: - Operating weight: 2,800 kg - Max. tipping load: 1,800 kg - Max. lifting capacity (at mount): 1,000 kg DIMENSIONS: - Steering angle: 42° - Turning radius (inner/outer): 2,350 mm / 4,200 mm - Lift height (lower edge of standard bucket): 2,580 mm - Dumping height (with standard bucket): 2,080 mm - Dumping angle: 39° - Standard bucket: 0.5 m³ capacity - Overall length: 4,650 mm - Overall width: 1,600 mm - Overall height: 2,450 mm - Track width: 1,270 mm - Wheelbase: 2,140 mm TYRES: - Standard: 31x15.5-15 agricultural tread - Optional: 10-16.5 industrial tread FEATURES: - Very high-quality, robust construction - Standard Euro mount - Lockable cab, tank and engine hood - Heating / ventilation - Rear-view camera - Spacious comfort cab - Easy operation Iodpfevz U Sxjx Altotk - Extremely maneuverable - Compact and highly versatile - Lighting system / road lighting - Hydraulic quick-change system - Third hydraulic circuit for attachments - CE certified to the latest standards and guidelines - Sale available net of VAT (with VAT ID only) - FINANCING available SCOPE OF DELIVERY: - FREE delivery within 200 km - One FARMER 811 wheel loader / yard loader - Including bucket + fork (4-in-1 bucket available on request) - Hydraulic quick coupler - Joystick control - 4x4 all-wheel drive - EURO MOUNT - ROAD APPROVAL - Float position - Operating permit for Germany For any of our loaders you can also order: - Trailer coupling - Additional counterweights - Any possible accessories such as scraper, grapple, snow plow, high-volume buckets, sweeper, grab bucket PRICE: €17,800 net €21,182 gross WARRANTY: - Each machine comes with a 12-month warranty, extendable for an additional year. - After the warranty expires, we ensure access to all spare parts for our customers. SERVICE: - We have our own mobile service, which supports all our customers both within and outside of Germany.

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment Iedpslht Hzefx Altstk (radius, bevel, flush milling)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Itodjzrd Rzepfx Altok Working width (min/max) mm 250 / 2500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 35 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Snipping Unit HL86 (2 x Kw 0,22) Rough Trimming Unit BF10 (2 x Kw 0,55) Fine Trimming Unit PF20 (2 x Kw 0,4) FRRE SPACE for Corner Rounding unit ( Contour Trimming) FF 12 (2 x Kw 0,4) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: excellent (used), Double side - First (1st) machine in a line Machine Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Iodpfx Aljzrd Nqjtotk Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 195 / 1500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 32 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Rough Trimming unit BF10 (2 x Kw 0,55) Fine Trimming unit PF20 (2 x Kw 0,4) FRRE SPACE Milling grooving unit UF 11 (1 x Kw ?) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)