Used Scrap Baler for sale (1,519)

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, total width: 3,450 mm, total height: 4,090 mm, total length: 10,020 mm, input voltage: 400 V, overall weight: 27,000 kg, noise level: 85 dB, pressure: 300 bar, transport height: 2,300 mm, power: 37 kW (50.31 HP), Fully automatic channel baler with pre-press flap available immediately. The machine includes a conveyor belt with a floor-mounted section. The baler is supplied in refurbished condition and the conveyor belt underwent a belt overhaul at the beginning of this year. The machine was taken out of production at the beginning of October and is currently stored in our facility. It can be demonstrated in operation at our location. This machine is particularly suitable for baling paper/cardboard and various types of plastics such as PET, HDPE, and big bags. Technical specifications baler: Drive: 37 kW Press force: 71 tons Bale dimensions: 1100 x 720 x 1300 mm (length adjustable) Number of wires: 4 vertical Filling hopper dimensions: 1620 x 1080 mm Bale weight: up to 600 kg (depending on material) Capacity: up to 20 tons per hour (depending on material) Transport weight: 27,000 kg Hedpfx Aajxl Rqbecjfn Technical specifications conveyor belt: Length of horizontal section: 3,000 mm Length of inclined section: 7,424 mm Angle: 29° Filling option: at floor level

Condition: good (used), Year of construction: 2018, functionality: fully functional, Horizontal baler Dixi 80 SLD with lift/tilt device, semi-automatic, year of manufacture 2018 Manufacturer: Dixi Model: Dixi 80 SLD Year: 2018 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: paper, cardboard, foil Documentation available. Please note: All technical data are based on manufacturer specifications. We accept no liability for the stated information or for possible errors. Hodpfxoxg Hhxs Aacofn This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works against advance payment, without warranty or guarantee.

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, Harris TGS57 - fully refurbished. Baler complete with drive, hydraulic pumps, valves, motors and complete piping. Electric control consisting of the main control panel, control desk. Circulating pump, filter and cooling system. Hodpfx Aaevmf Nrscofn

Condition: used, Year of construction: 2020, operating hours: 2,530 h, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 20719 Specifications: Hfodswrl U Rjpfx Aacjn Model year: 2020 Operating hours: approx. 2,530 Engine power: 129 kW Undercarriage: See photo Interchangeable jaws Includes one extra jaw for finer fractions Description:Arjes waste shredder, model year 2020, primarily used for processing wood and bark. Equipped with interchangeable jaws, and delivered with an additional jaw suitable for producing finer output fractions.Quick delivery available. Hours: 2530 Own weight: 14500 Model: Impaktor 250

Condition: ready for operation (used), Year of construction: 2008, pressing force: 54 t, filling opening width: 1,195 mm, filling opening length: 650 mm, bale length: 1,200 mm, bale width: 1,200 mm, bale height: 1,100 mm, bale weight: 550 kg, total width: 1,780 mm, total height: 2,985 mm, total length: 1,568 mm, overall weight: 2,403 kg, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400V Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 x 65 cm Condition: very good! Function tested. FLITS Rental & Sales service: With every machine, we provide a bundle of baling wire (120 wires). Need more baling wire bundles? Request a free quote without obligation. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for both businesses and individuals. We focus on delivering efficient solutions in internal logistics, cleaning, waste processing, and working at heights. Waste baler, Paper baler, Cardboard baler, Plastic baler, Waste compactor, Recycling, Textile baler, Waste processing. Hedoxhg Dvopfx Aacjfn

Year of construction: 2013, condition: ready for operation (used), A metal press RMH MB (Mini Baler) by RMH Diebels Recyclingmaschinen is offered. Filling box dimensions: approx. 815mm/350mm/510mm, bale size: approx. 350mm/200mm, pressing cycle: approx. 1min, cutting blades on three sides of the filling box, lid shear force: 20t, bottom ram force: 40t, operating pressure: approx. 220bar, machine dimensions X/Y/Z: approx. 2450mm/1200mm/1400mm, weight: approx. 1800kg. An on-site inspection is possible by appointment. Hjdpfexn Aayex Aacsfn

Condition: used, Year of construction: 2006, operating hours: 54,050 h, pressing force: 80 t, filling opening width: 1,020 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, oil tank capacity: 2,100 l, power: 94 kW (127.80 HP), empty load weight: 21,000 kg, Technical data baler: Manufacturer Paal Hsdpfxexcxm Ee Aacsfn Typ Konti 275 E Year of construction 2006 Hours of operation in total 54,050 hours Press power main press 80 tons at 300 bar Specific press capacity 9,7 kg/cm² Feed channel 1,600 x 1.020 mm (l x w) Throughput capacity under operating conditions 350 m³/hour Bale size 750 x 1,100 mm, length variable Driving motor 75 kW Connected load 94 kW Rated current 180 A Tying system 4-fold vertical, fully automatic Bale weight up to 750 kg, depends on material Volume hydraulic oil tank 2,100 l SPS controller (manuf., type) Siemens Simatic S7-300 Operating panel (manuf., type) Siemens Multi Panel Transport dimensions only baler 11,152 x 2,152 x 3,000 mm (l x w x h) Machine weight baler approx. 21 tons Condition of the baler: The press and conveyor belt are in satisfactory working condition, see photo documentation. Further technical data and dimensions for the conveyor belt are not currently available. The plant is currently still in operation and is to be replaced by a larger press plant in the coming months. Scope of delivery: Bale press, bale chute, conveyor belt and machine documentation. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Dismantling and loading is the responsibility of the buyer. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2000, operating hours: 28,155 h, Baler Paal Konti 200 D, year of manufacture 2000, optionally available with matching Paal KEM-1400 conveyor belt Technical data: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, variable length Hfsdpfxjxgp Ibj Aacon Binding: 4-fold automatic Throughput at 35 kg/m³: approx. 9.5 t/h 60 kg/m³: approx. 16.5 t/h 100 kg/m³: approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, cardboard, film The baler was dismantled from running operation. Complete documentation available. Please note: All technical data is based on information provided by the manufacturer. We do not accept liability for the details provided or for any possible errors. Subject to prior sale; the offer is non-binding and may be withdrawn at any time. Inspections are possible by prior arrangement. Sale is on a prepayment basis, ex works, without warranty or guarantee.

Condition: reconditioned (used), Year of construction: 2008, operating hours: 23,000 h, machine/vehicle number: 00834, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,315 mm, bale width: 1,100 mm, bale height: 720 mm, warranty duration: 3 months, power: 30 kW (40.79 HP), year of last overhaul: 2025, Equipment: documentation/manual, Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler, hereby offers the following machine(s) A repaired HBC60 (30kw) Repaired – in very good technical condition Year of construction: 2008 Hsdpfxjxck U Uj Aacefn Volume capacity m3/hr max. 365 334 321 301 Volume weight kg/m3 max. 15 30 50 80 Weight capacity T/hr max. 5.5 10 16 24 Bale weight 400 – 800 kg, depending on S.G. of material and bale length Bale length - adjustable Bale height - 720 mm Bale width - 1100 m Filling opening - 1100 mm x 1320 mm Max. size supply - 1500 mm x 1200 mm Pressure force ram - max 60 tonf. Pressure force pre-press flap - max 25 tonnes Cycle time - 18 seconds Motor - 45 kW Motor Twistomat - 2.2 kW Motor counter pressure pump - 1.1 kW Following repairs have been done in our official Bollegraaf OEM Refurbishment Workshop: * Safety doors needle installation replaced with new * Ram wheels behind replaced with new * Bronze strip above ram replaced with new * Movable beam position switch ram replaced with new * Scraper above ram replaced with new * Sealing pre press cylinders replaced with new * New steel beams channel cylinder * nieuwe buisjes oplassen en wielen gangbaar maken * New pusher cylinder underneath vertical tying unit * Safety hatch behind needle installation replaced with new * Several cables and asi modules replaced with new * New air filter * New oil filters

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 91-01611001, pressing force: 16 t, filling opening width: 545 mm, filling opening length: 680 mm, bale length: 800 mm, bale width: 600 mm, bale height: 550 mm, bale weight: 80 kg, total width: 860 mm, total height: 1,680 mm, total length: 3,530 mm, overall weight: 1,200 kg, power: 3 kW (4.08 HP), Horizontal baler that can be loaded via a chute, allowing the use of a light barrier. Tying is done manually twice with strapping tape. Price proposals are welcome. Hfodpfxev T R Uto Aacen

Condition: used, Year of construction: 2020, We offer, directly and on behalf of the owner: Cardboard baler, used Hfjdpfxexg I Aws Aacon Manufacturer: Unibaler (Denmark) Model: UX 4 Year of manufacture: 2020 Pressing force: 4 t Feed opening: 710 x 446 mm Feed height: 746 mm Chamber height: 1082 mm Stroke length: 550 mm Bale size: 710 x 560 x 630 mm Bale weight – Cardboard: 30 - 60 kg Bale weight – Plastic: 40 - 60 kg Strapping tape width: 9 mm Power supply: 230V, NO three-phase power required! Dimensions: 853 x 734 x 1986 mm Weight: 515 kg The baler comes from a reputable, well-maintained operation and is only being sold due to insufficient capacity.

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, cutting force: 700 t, power: 300 kW (407.89 HP), empty load weight: 115,000 kg, total width: 3,000 mm, total length: 17,000 mm, total height: 4,000 mm, overall weight: 91,000 kg, cutting length (max.): 7,100 mm, year of last overhaul: 2024, pressure: 360 bar, Taurus K773.L1E Cutting force 700 tons Cutting width 950 mm ( blade 1000 mm ) Cutting height 650 mm Box 7100 mm rammer 900 kN Central lubrication system Included 300 kW drive power Revision 2024 (year of construction 2006) Revision includes the following work: - Replacing the HARDOX carriage guides - Replacing the carbon guides on the blade carriage - Installation of new knife seats top/bottom - Installation of new blades and screws top/bottom - Welding on the worn parts in the scissor mouth - Dismantling of both covers, fitting new hinges, fitting new shafts, reassembly - Overhaul of all 4 HPR 160D pumps at LINDE Poland - Sealing the valves on the left/right valve bank - Installation of new piston rod feed (180 x 8.29 m) - Installation of new feed guide bushes incl. sealing package - Overlay welding of feed block and hold-down device, followed by milling to size - Inspection of side cylinders, in some cases installation of new seal packs, if required - Replacing piston rods and honing pipes - General repair work on hydraulic pipes, clamps, in some cases - Replacement of damaged hoses - General repair work on structure, covers and platform construction Hodjuptmyjpfx Aacjfn - Repainting of the system - Steel frame for mounting the machine Ready for immediate use. Available from December 2024 with repainting

Condition: good (used), Year of construction: 2012, operating hours: 12,078 h, functionality: fully functional, pressing force: 88 t, filling opening width: 1,100 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 30,000 kg, oil tank capacity: 2,000 l, power: 98 kW (133.24 HP), volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2012 Total operating hours: 12,078 hours, as of September 2025 Pump operating hours 6,616 hours (effective pump running time) Number of bales pressed: 65,792 bales, as of September 2025 Main press force 880 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 98 kW Total current consumption 192 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a Hfodpfxsxcngne Aacen bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 18,000 x 4,300 x 3.270 mm (l x w x h) Press dimensions with conveyor system 18,000 x 22,000 x 5,765 mm (l x w x h) Transport weight baler approx 30 t (Main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2012 Drive power 7.5 kW Belt speed 0.05 – 0.4 m/second Length of feeding conveyor 6,000 mm Height of side wall from feeding conveyor 400 mm Length of incline conveyor 9,000 mm Height of side wall from incline conveyor 800 mm Length of gooseneck 1,500 mm Incline 30° Nominal width 1,800 mm Useful width 1,700 mm Belt quality EP-500/4 Steel cleats on the rubber belt 50 x 50 mm Hollow pin chain, pitch 125 mm, rollers 36 mm Height of drive axle above ground 4,284 mm Overall height of conveyor belt 5,765 mm Transport dimensions of feeding conveyor approx. 7,000 x 2,200 x 1,250 mm (l x w x h) Transport dimensions of the incline conveyor 13,000 x 2,500 x 2,900 mm (l x w x h) Pit dimensions for the conveyor belt 14,765 x 3,260 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, baling press with bale chute, and wire drawing stations are available for sale, but without the wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2019, operating hours: 1,022 h, functionality: fully functional, Baler Presto CC 20 M, year of manufacture 2019, pressing force 20 t, with retention device. Hjdpfx Asxfh H Heacsfn Technical data: Manufacturer: Presto Model: CC 20 M Year of manufacture: 2019 Operating hours: 1022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Tying: 3-fold, manual Throughput capacity at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: paper, cardboard, film Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find a video on our website or YouTube channel. Inspections, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a service fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the information given or for any potential errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. The sale is ex location, without warranty or guarantee.

Condition: used, Year of construction: 2021, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 20857 Specifications: Design: Mobile, mounted on a trailer easy transport and flexible operation Rotor: Diameter: 700 mm Length: 2,800 mm Variable speed: 0%u2013200 RPM Automatic rotation direction and cleaning system 140 flat knives (60x60x30 mm), replaceable and reversible Hjdpfx Aaswvzryscefn 5 static counter knives, reversible F ring system: Automatic, hydraulic feeder Cutting technology: Progressive cutting for smooth and efficient material processing Engine and operation: Engine type: Diesel Brand: SCANIA DC 13 EURO 6 Power: 407 kW Emission system: Separate AdBlue tank Control panel: Touch screen %u2013 user-friendly and in accordance with EEC standards Remote control included Efficient material handling: Hydraulic raising/lowering of the feed hopper Rubber track with hydraulic outlet Overbelt magnet for efficient metal separation Weight: Total weight approx. 32,000 kg   Description: MOBILE INDUSTRIAL GRINDER %u2013 MAC-S 28%u201370 HYDRO MOBILE We offer a MAC-S 28%u201370 HYDRO MOBILE, specially designed for maximum performance and flexibility. Perfect for recycling, waste management or other coarse grinding. Can be delivered within a short time. Own weight: 32000 Model: MAC-S 28-70

Year of construction: 1990, condition: good (used), strip width: 900 – 2.050 mm strip thickness: 1 – 6 mm edge strip width: 5 – 50 mm Hjdpfx Ajbicbzeacefn material (strength): 1.000 N/mm²

Condition: used, Year of construction: 1997, functionality: fully functional, power: 110 kW (149.56 HP), empty load weight: 30,000 kg, Channel baler BAUER Model: Taurus Bale dimensions: 680x1100x variable Technical data as per attached PDF. Including belt control Hjdpfx Asw Ip E Djacefn The baler is available immediately

Condition: excellent (used), Year of construction: 2015, operating hours: 19,750 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, oil tank capacity: 2,000 l, empty load weight: 33,000 kg, volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2015 Operating hours 19,750 hours, as of July 2025 Number of bales pressed: 24,760 bales, as of July 2025 Main press force 1000 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 121 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 110 kW Total current consumption 213 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 12,130 x 4,800 x 3.270 mm (l x w x h) Press dimensions with conveyor system 35,000 x 8,480 x 7,745 mm (l x w x h) Transport weight baler approx 33 t (Main press approx. 12 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Hfodpfx Aajxb Dvvjcjn Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition and is cleaned, lubricated and maintained by the operator on a weekly basis in accordance with the manufacturer's specifications. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2015 Belt speed 0,36 m/sec. Length feeding conveyor 7,000 mm Length elevating conveyor 14,500 mm Length goose neck 1,550 mm Grade 30° Nominal width 1,800 mm Effecting width 1,638 mm Height conveyor over all 7,745 mm Pit dimensions to conveyor belt 11,200 x 3,000 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, the transverse distribution belt and the baling press are for sale, with bale chute but without wire pulling stations and without wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Baler Presto CC 50 M, semi-automatic, year of manufacture 2015, pressing force 50 t, with lifting and tipping device Technical data: Manufacturer: Presto Model: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Tying: triple, wire, manual Throughput (bulk density): 35 kg/m³ – 1.3 t 60 kg/m³ – 1.7 t 100 kg/m³ – 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4000 kg Materials: paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find a video on our website or on our YouTube channel. Inspections, including under power, are possible at any time by appointment. We also offer test runs with your material for a handling fee upon request. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00, and Friday from 08:00 to 13:00. Please note: All technical data are based on information provided by the manufacturer. We do not accept liability for any information given or for possible errors. This offer is subject to confirmation, prior sale, and may be revoked at any time. Inspections are possible by appointment. The sale is ex works against prepayment, without warranty or guarantee. Hfjdpfx Aasxfh Htscsn

Condition: used, Year of construction: 2017, operating hours: 6,500 h, Field of application: Construction Serial number: W09306325H2D3xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19454 Specifications: - 2017 model - Hours: Approx. 6500 - Weight: 25,000 kg - Central grease Hfjdpfx Asvyf Dvjacon - Mobile - Magnetic tape - Comb extension - Follows with full comb with blades of approx. 90% - Includes 2 new original tapes - Services are taken by owner - Ready for delivery Description: Opportunity to secure a Doppstadt DW3060 from 2017. The machine is used for wood and waste. It is sold with a full comb with blades and 2 new ribbons. 3 tooth holders are broken, but the owner has both holders and blades lying around. Ready for delivery. Hours: 6500 Own weight: 25000 Total Weight: 25000 Model: DW-3060

Year of construction: 1990, condition: good (used), strip width: 900 – 2.050 mm strip thickness: 1 – 6 mm Hfjdpfxogrug Ao Aacsn edge strip width: 5 – 50 mm material (strength): 1.000 N/mm²

Condition: excellent (used), Year of construction: 2004, operating hours: 34,480 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 19,000 kg, transport height: 3,300 mm, oil tank capacity: 750 l, power: 45 kW (61.18 HP), Technical data baler: Manufacturer Bollegraaf Typ HBK 100 Year of construction 2004 Hours of operation 34,480 hours Press power main press 100 tons Press power of pre-press max. 42 tons Feed channel 1,600 x 1,100 mm Filling volume 3.15 m³ Theoretic cycle time 22 sec. Theoretic throughput capacity up to 450 m³/hour Hfedpexbgnhjfx Aacjn Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 13 tons/hour bulk weight of 50 kg/cbm approx. 20 tons/hour bulk weight of 100 kg/cbm approx. 30 tons/hour Throughput rate with ruffler approx. 20 tons/hour Bale weight 550 up to 750 kg, depends on material Volume hydraulic oil tank 750 l SPS controller Telemecanique TSX Micro Transport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h) Machine weight baler approx. 19 tons Comments: Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but cuts the material between blades on the press ram and the counter blade in the frame. This makes it a cutting edge press, similar to a Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compressing paper from document destruction. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2016, operating hours: 2,074 h, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Technical data: Manufacturer: HSM Model: V-Press 1160 plus Year of manufacture: 2016 Operating hours: 2,074 Pressing force: 55 t Drive power: 4 kW Cycle time (idle): 25 s Filling height: 1,115 mm Hfsdpoxfh Dlefx Aacen Filling opening: 1,195 x 650 mm Bale size: 1,200 x 1,100 x max. 1,200 mm Bale weight: 550 kg Dimensions: 1,700 x 1,800 x 2,200 mm (W x D x H) Weight: 2,430 kg Materials: Paper, cardboard, cartons, films, plastics, PET The operating manual and EC declaration of conformity are available in German. Remarks: The machine is in very good condition. It has been inspected and tested at our site in 28816 Stuhr. The video can be found on our website or YouTube channel. Inspections, including under power, can be arranged at any time by appointment. Upon request, we also carry out tests with your material for a handling fee. If you have questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00–14:00. On Fridays, we are available from 08:00–13:00. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. Offers are non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is ex location, without warranty or guarantee.

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm Hjdpfxognyglj Aacofn speed: approx. 60 m/min

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm strip thickness: 0,4 – 2 mm Hsdsgrug Repfx Aacofn edge trimming width: 5 - 60 mm speed: approx. 60 m/min