Used Salad Bar for sale (14,073)

Year of construction: 2023, operating hours: 11 h, condition: as good as new (ex-display), machine/vehicle number: MA0144_1922, Exhibit: Compressor Kaeser SX 8 (10 bar) with SIGMA CONTROL 2 Year of construction: 2023 Operating hours: 1 Bh Techn.Daten: Volume flow at 10 bar: 0.67 m³ / min Motor power: 5.5 kW Electrical connection: 400 V / 3/50 Hz Dimension W x D x H: 590 x 632 x 970 mm Weight: 155 kg Connection compressed air: G 3/4 " Sound pressure level: 64 dB (A) Chodpfxjh Ey Rcj Ad Ioc Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors

Condition: refurbished (used), Year of construction: 2003, operating hours: 7,951 h, functionality: fully functional, total width: 2,450 mm, total length: 7,600 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, overall weight: 9,000 kg, rotational speed (max.): 2,100 rpm, empty load weight: 9,000 kg, year of last overhaul: 2025, water pressure: 1,000 bar, pump capacity: 205 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit, Hammelmann HDP 402, housed in a WAB container. Similar to, but not a Kamat, Uraca, or Woma. Chodeipadxopfx Ad Ioc Pump type: Hammelmann HDP 402 PRESSURE STAGE 1: Operating pressure: 880 bar Flow rate: 242 l/min PRESSURE STAGE 2: Operating pressure: 1000 bar Flow rate: 205 l/min Drive speed: 2100 rpm Plunger: d50 mm Drive power: 400 kW with a 442 kW Caterpillar C-15 2CPXL14.6ESK diesel engine with workshop and changing room. Dimensions L x W x H: approx. 7600 x 2450 mm Weight: approx. 9000 kg Year of manufacture: 2003 Operating hours: 7951 Condition: The high-pressure pump has been fitted with new valves. New batteries. In good used condition.

Condition: used, Q 33.0 m³/h P 15,0 kW max. 20 bar Cedpfx Aeikwapjd Iohc max. 110 C° H 90.0 m Nr. 4932869340 232 kg

Condition: good (used), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 290 mm -Recess inlet: Ø 268 mm -Bolt circle: Ø 168 mm Cjdpfob E N Txox Ad Ishc -Mounting hole: Ø 21/31 mm -Mounting hole spacing: 148 mm -Through hole: Ø 70 mm -Weight: 43.5 kg

Year of construction: 2000, condition: good (used), 3-jaw collet chuck Cjdpfx Ajd Sym Ajd Iohc Manufacturer: SMW, Type: HG 200, year of manufacture approx. 2000 Bore diameter: 50 mm Flange mounting diameter: 170 mm Without jaws, with chuck key. Chuck in good condition.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 7 h, machine/vehicle number: MA0036_S0053901, Screw compressor ALMIG BELT XP 8 - 10 bar (air cooled) Year 2024 / IMMEDIATELY AVAILABLE! Hours: 7 h Technical specifications Type: BELT XP 8 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 0.99 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 7,5 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 63 dB (A) Length: 800 mm Width: 670 mm Cjdsd S Dq Eopfx Ad Ijhc Height: 1100 mm Weight: 274,5 kg Compressed air connection: G 3/4 "

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -for: Harbs K2V folding machine -Max. Pressure: 70 bar Cedpfx Asdwc I Isd Iehc -Motor: 0.75 kW 1400 rpm -Dimensions: 650/460/H600 mm -Weight: 60 kg

Condition: new, 🚀 Modular powder coating systems with rod transport system Our modern coating systems with rod transfer systems offer maximum flexibility while minimizing space and energy consumption. All process steps – from pretreatment to oven drying – can be implemented in a continuous line. 💡 Ideal for the following applications: Powder coating and wet painting Sandblasting Chemical pretreatment Curing and cooling 🔁 Intelligent transfer system The transport system moves the workpieces safely and efficiently through all stations of the system: Manually or motor-driven Optionally with a lifting device for heavy workpieces Parking stations for buffering and intermediate storage Compatible with automatic and walk-in coating booths The movement is fully automatic with a continuously variable drive, which enables precise control of the cycle times. 🏗️ Structure & components: Single-rail conveyors for longitudinal movement Transverse guide units for changing direction Movable carriages with product holders Supporting steel structure for permanent load Control via control panel with speed regulation ⚙️ Efficiency through well-thought-out design The system allows for non-contact handling – the workpiece is hung onto the loading station and remains in the same position until it is removed. This ensures consistently high quality and minimizes handling times. 🔧 Lifting device for loading and unloading The integrated rod lifting device enables ergonomic and safe working with heavy parts. The staff can position the lifting rod precisely by pressing a button (raise/lower) – ideal for large components. ✅ Your advantages at a glance: Fully automatic material flow For workpieces of any size and weight Reduced space requirements Cjdpfxody Ezdj Ad Ijhc Minimal maintenance, maximum service life High energy efficiency Adaptable to your individual requirements This solution is perfectly suited for modern coating processes where flexibility, ergonomics and efficiency are the focus. Our experienced engineering teams will adapt the system precisely to your production requirements. 👉 Contact us for a customized solution or visit our website for more information.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, machine/vehicle number: MA0138_MAXXI4,0D_270st, Demonstration machine: new piston compressor available immediately (Plug and Play): AIRKO MAXXI 4.0 D - 270 ST - 10 bar with standing 270 liter compressed air tank The compressor has 1 operating hour and is available immediately. 2 cylinders Pressure: 10 bar Rated power: 4.0 kW Delivery quantity at 7 bar: 495 l / min Sound level: 78 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 155 x 59 x 113 cm Weight: 134 kg Convenient leasing via our house bank possible. Visit our shop. Codsd Hy T Aopfx Ad Ijhc We always have a large selection of new and used compressors in stock! Immediately available.

Condition: new, FG170 flat bar and square tube polishing machines are equipments with a solid construction and ready for intensive work in bars or rectangular tubing. These machines enable the work up to 170mm width with multiple combinations of belt heads and brushes. FG170 Z has one abrasive belt unit, while FG170 ZK combines the abrasive belt head with an abrasive brush. A double abrasive belt machine, FG170 2Z, and double abrasive belt plus brush, FG170 2ZK are also available. Other options such as 3 abrasive belts or modification of order of belts and brushes can also be supplied. Different configurations: Finishing and removing imperfections of square and rectangular tubes, flat bars or any flat component with different combinations of abrasive belt and brush stations. Abrasive brush head: Smooth finishing after belt grinding operation with non-woven brush. Codsd Ix Ntspfx Ad Iohc Square or rectangular tube finishing: High quality of surface finishing on stainless steel tubes, tube after tube also flat bars. Quick abrasive belt replacement: Tool-free abrasive belt replacement. Fast and easy belt change in few seconds. Fixed working height: FG machines have a constant working height. The adjustment for different thicknesses is made by the movement of the abrasive stations, keeping the conveyor belt always at the same level. This helps the work of long tubes and bars without having to adjust roller tables. Technical Details - FG170 Working capacity (Ø mm) 170x200 No. belt stations (Z) 1-3 No. brush stations (K) 0-2 Abrasive belt dimensions (mm) 170x2000 Abrasive brush dimensions (mm) 170xØ200 Abrasive belt speed (m/s) 20 Abrasive brush speed (m/s) 15 Feeding speed (m/m) 6+12 Abrasive belts motor per head (kW) 4 Abrasive brush motor per head (kW) 3 Feeding motor (kW) 0.45 Total power (kW) 8.5 (ZK) Consumption (A) 18 (ZK) Dust extraction connection per head (Ømm) 80 Dimensions (mm) 1500x1000x1900 (ZK) Weight (kg) 740 (ZK)

Condition: used, Welding bar -from: vacuum device Roschermatic VM 45/2 -Price: per piece -Number: 4 pieces Chodpod I Hizjfx Ad Isc -Length: 635 mm/15 mm/30 mm -Weight: 2.2 kg/piece

Condition: as good as new (ex-display), Year of construction: 2026, PTC JTR-C Cold Water Trailer – similar to, but not a Dynajet, Oertzen, Falch, ROM, Rioned, Karo, etc. - Single-axle trailer with a hot-dip galvanized frame, support leg with wheel, parking brake, automatic reverse gear, stand feet, taillights and reflectors, tow hitch for 50 mm coupling, 13" tires and ABS. The following cold water models are available: JTR-C 60/200 | 60 l/min at 200 bar | Engine: Kohler KDW 1404 26 kW JTR-C 75/150 | 75 l/min at 150 bar | Engine: Kohler KDW 1404 26 kW JTR-C 75/210 | 75 l/min at 210 bar | Engine: Kohler KDW 2204 37.5 kW JTR-C 84/190 | 84 l/min at 190 bar | Engine: Kohler KDW 2204 37.5 kW JTR-C 102/150 | 102 l/min at 150 bar | Engine: Kohler KDW 2204 37.5 kW Engine type: TIER III (Kohler) or Stage V (Yanmar) Codjfdkbgopfx Ad Iehc - Dimensions: 3,370 x 1,640 x 1,540 - Unladen weight: approx. 600 kg - High-pressure pump: HPP - HD hose reel: fixed and manual or hydraulic with a maximum of 100 m of 1/2" and 60 m of 3/4" hose (included) - Water supply hose reel: manual with 50 m of 3/4" hose - Water tank: 600 l - Options such as remote control, warning light, work light and accessories available upon request.

Condition: as good as new (ex-display), Year of construction: 2025, PTC CTR-C cold water trailer, similar but without ROM, Rioned, Karo, etc. - Single-axle trailer with hot-dip galvanized frame, support leg with wheel, parking brake, automatic reverse gear, stand feet, rear lights and reflectors, tow hitch for 50 mm coupling, 13" tires and ABS. Codpfxjfdvkrj Ad Iehc The following cold water models are available: CTR-C 43/180 | 43 l/min at 180 bar | Petrol engine: Honda GX690 17.7 kW CTR-C 55/160 | 55 l/min at 160 bar | Petrol engine: Honda GX690 17.7 kW CTR-C 60/150 | 60 l/min at 150 bar | Diesel engine: Kohler KDW 1003 19 kW CTR-C 20/350 | 20 l/min at 350 bar | Diesel engine: Kohler KDW 1003 19 kW - Dimensions: 3,045 x 1,390 x 1,190 - Unladen weight: approx. 350 kg - High-pressure pump: Comet TW Premium with integrated gearbox - HD hose reel: manual, with max. 60 m of 1/2" hose (included). Model CTR-C 55/160 OPTIONAL with electric HD hose reel. - Water supply hose reel: manual, with 35 m of 3/4" hose - Water tank: 400 l - Options such as remote control, booster pump, warning light, work light, aluminum hose cover, and accessories available upon request.

Condition: as good as new (ex-display), Year of construction: 2012, ⭐ PREMIUM LOW-HOURS BORING MILL — READY FOR IMMEDIATE USE ⭐ Bohrwerk SCHIESS SMT BMT 130 (2012) | Low Hours (~10k) | Heidenhain iTNC 530 | Ball Bar Tested ​Description: ​PREMIUM OFFER: LOW HOURS & VERIFIED GEOMETRY ​The Opportunity: You are looking at a Schiess SMT BMT-130 (Year 2012) with a transparent history of light usage. With only ~10,000 Spindle Hours (and 8,900 Program Run Hours), this machine has averaged less than 1 shift per day since new. It is NOT a tired production machine. ​✅ JUST COMPLETED (Ready for Inspection): ​Geometry Verified: Passed the Renishaw Ball Bar Test with excellent results (Proof of precision available). ​Aesthetics: Professional Fresh Paint applied. The machine looks excellent. ​Functionality: Automatic Tool Changer (ATC) fully serviced and tested. ​TECHNICAL DATA (Verified on Screen): ​Control: Heidenhain iTNC 530 ​Spindle Time: approx. 10,090 h ​Program Run: approx. 8,900 h ​Spindle Diameter: 130 mm (ISO 50) ​WHY BUY THIS MACHINE? ​Authentic Condition: The low hours are genuine and verified by the control unit. ​Ready to Work: Geometry checked, ATC working, looking great. ​Price: At €230,000, it offers the best Price/Performance ratio on the market for a 2012 machine. ​VIDEO PROOF by request Technical data: Spindle diameter - 130mm Spindle Type - ISO 7:24 No50 Chodopa N Uhopfx Ad Ioc Spindle Speed - 3000 RPM W axis - 800mm Y axis - 2000mm Z axis - 1600mm X axis - 4000mm Table size - 1800x2200mm Table loading capacity - 12.000kg General dimensions - 6800x6300x4600mm Machine Weight - 35000kg

Condition: good (used), Year of construction: 2002, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station Cedpopy Rx Tefx Ad Ijhc -Manufacturer: Couperus Hydrauliek, hydraulic station made of slats/blind production -Housing: material VA -Motors: 5x elsto 1.5 kW -Pressure: up to 250 bar -Flow rate: 10 l/min -Individual components: see photos -Dimensions: 2100/660/H1040 mm -Weight: 554 kg

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with chassis Cjdjpz Sf Nepfx Ad Ijhc -Motor: kW -Pressure: up to 200 bar -Flow rate: 48 l/min -Individual components: see photos -Dimensions: 1580/1040/H1200 mm -Weight: 632 kg

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station Chodpfxep Tbaao Ad Ioc -Manufacturer: Couperus Hydrauliek, hydraulic station made of slats / blind production -Housing: material VA -Motors: 7x elsto 2.2 kW -Pressure: up to ca. 250 bar -Flow rate: ca. 10 l/min -Individual components: see photos -Dimensions: 3000/560/H1000 mm -Weight: 380 kg

Condition: ready for operation (used), Rexroth SR 8 3842998020 swivel arm robot SN: 4810354, used, in good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Chsdpfx Aoqb Tdbod Iec

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with chassis Codpfxspvqy Ie Ad Ishc -Motor: kW -Pressure: up to 300 bar -Flow rate: 20 l/min -Individual components: see photos -Dimensions: 1500/1030/H1210 mm -Weight: 555 kg

Condition: new, Year of construction: 2025, KAESER compressed air tank 10000 liters standing, galvanized 16 bar include fittings Year of construction: 2025 High-quality compressed air tank in galvanized design. Galvanized inside and outside according to DIN EN ISO 1461 in immersion bath. Connecting piece for conical threads. Technical specifications: Volume: 10000 liters Chjdpfx Aokzizged Ijc Overpressure max: 16 bar -Diameter: 1600 mm Container height: 5415 mm Mass: 2550 kg Connection compressed air inlet: 2x DN 200 Connection compressed air outlet: 2x DN 200 Connection safety valve: G 2 " Connection condensate drain: G 1 1/2 " Container acceptance: RL2014 / 29 / EU Min. Operating temperature: - 10 ° C Max. Operating temperature: + 50 ° C Surface coating: galvanized For new machines comfortable leasing via our house bank possible. Visit our shop. We always have a large selection of new and used compressors in stock!

Condition: used, Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump Chedpfx Adjul H Ebo Ioc -Manufacturer:Si Smiths Industries, hydraulic pump hydraulic unit -Type: 102680-13-24 -Voltage: 24 V -Pressure: 160 Bar -Dimensions: 160/130/H330mm -Weight: 10.1 kg

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: 5053-4053142274002, power: 30 kW (40.79 HP), Bar shears, make Peddinghaus, type Caddy 63 Technical data: Chsdpfxjtukpao Ad Ijc Shearing force/diameter (max.): 2000 kN/63 mm Drive power: 30 kW Equipment/special feature: bar magazine, 6 m

Condition: used, Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 220 mm -Taper cone: Ø mm -Mounting hole circle: mm -Through hole: 50 mm -Exchangeable jaws: Chedpfx Adednaz Ne Isc -Weight: 25 kg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Motor: 0.25 kW 1410 rpm Chodpfxodpyzrj Ad Iec -Max. Pressure: 110 bar -Max. Liter output: l/min -Hydraulic tank -Pressure relief valve: 1 -Valve: 1 -Dimensions: 350/250/H435 mm -Weight: 32 kg

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High-pressure cleaner PTC Torpedo Compact 21/250, 21/350, and 15/500 – similar to, but not a Dynajet, Oertzen, Falch, etc. - Cold water/hot water at approx. 95°C and steam at 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only in versions with 250 and 350 bar) and a chemical-free weed control function with approx. 99°C. The following models are available: - Torpedo Compact 23/250 | 23 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16 l/min. at 500 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 PS (high-pressure steam) | 16 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 PS (high-pressure steam) | 16 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Dimensions and empty weight without water tank: 1205x1250x1330mm, approx. 280kg - Dimensions and empty weight with 300 l water tank: 1250x1900x1330mm, approx. 350kg - Dimensions and empty weight with 500 l water tank: 1250x1900x1330mm, approx. 350kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hour counter - Manometer - Pressure regulator Csdpfodqkrwox Ad Iehc - Safety valve - High-quality frame made of painted steel with forklift slots - Covers made of stainless steel - Magnetic descaling device - incl. 20 m high-pressure hose, spray gun, lance, and flat jet nozzle 25° - Further accessories such as a frame for the water tank, water tank 300 or 500 l, water-sandblasting kit, surface cleaner, rotating nozzle, sludge suction pump, steam nozzle, weed control lance and bar available on request.