Used Round Baler for sale (7,627)

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Bodpevgrh Uofx Adxelp Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, diameter 4 - 65 mm length 100 - 1270 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery Bljdsxrvmhspfx Adxsp if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: new, Year of construction: 2025, functionality: fully functional, Waste Baler BTS-MF75 in stock and available straight away The BTS-MF75 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 75 kg. With a can crush insert baler is even suitable for crushing individual sheet metal and plastic containers and also cans. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 3.5 Ton Bale weight: up to 75 kg (material depending) Bale size: 1000 H (var.) x 700 W x 500 D mm Machine size: 2335 H x 1040 W x 750 D mm Machine weight: 278 kg Transport height: 2335 / 1800 mm (on request) Loading aperture: 700 W x 698 H mm Cycle times: 24 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Bsdout Tk Hopfx Adxolp Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Retainer for reducing the material spring back Reel holder for 2 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Cans and light sheet metal containers Canisters and light plastic containers Clothes Light valuable materials Optional extras Machine colour RAL Can crusher insert PLC auto compaction cycles with bale full light and E-stop with locking key Strap eject for easy removal of bales Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: used, Brand:CASANOVA Model: PCV 35- 3 RODILLOS Descritción • Capacity 3050 x 20 mm Blsdpfx Ajvx A Amedxsp • Voltage 400v/50h • Weight 15000 kg

Year of construction: 2002, condition: ready for operation (used), diameter 2-23 mm Bsdpfextfzqox Adxelp length 4200 mm

Condition: new, FACTORY NEW ROTARY TABLES Working position: vertical - horizontal Applications: positioning – stepless rotation // interpolation Rotary table clamping surface Ø: 500 / 600 / 800 / 1,000 / 1,200 mm - Clamping surface can also be square - Max. workpiece weight (horizontal): up to 20,000 kg Max. workpiece weight (vertical): up to 4,000 kg Positioning accuracy: ± 3 arc seconds Integration with machines featuring HEIDENHAIN or SIEMENS controls. Bledpfx Ajm Tvz Djdxsp Only inquiries from Germany will be answered /// Nur Anfragen aus Deutschland werden bearbeitet

Condition: used, Year of construction: 2003, functionality: fully functional, Baling Press Presto CC 13 V, Year of Manufacture 2003 Technical Specifications: Manufacturer: Presto Model: CC 13 V Year of Manufacture: 2003 Bledpfx Adsw Tyxljxjp Pressing Force: 13 t Cycle Time: 24 s Drive Power: 4 kW Feed Opening: 780 x 750 mm Feed Volume: 0.39 m³ Binding: triple, automatic Throughput at bulk density of 35 kg/m³ - 1.7 t 60 kg/m³ - 2.5 t 100 kg/m³ - 3.8 t Bale Dimensions: 700 x 750 mm Bale Weight: up to 250 kg Dimensions: 2800 x 1050 x 1830 mm (LxWxH) Machine Weight: approx. 1,900 kg Materials: paper, cardboard, film The press is in good condition and has been function tested. Please note: All technical data is based on manufacturer specifications. We do not assume any liability for the information provided or for possible errors. This offer is non-binding, subject to prior sale and may be withdrawn at any time. Viewing by appointment. Sale is ex works, advance payment required, without warranty or guarantee.

Year of construction: 2001, condition: used, volt 200 V KW 2 KW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Bljdpfx Ajxrg A Tjdxop Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: good (used), Year of construction: 2006, Garbage compactor, garbage press, press container, garbage container, self-compacting compactor, waste press, paper press container, paper container, cabinet press, vertical baler -Manufacturer: Bramidan, cabinet press vertical baler -Type: 4-0 S50 KBP PES243768-2 Bedpfx Ajxnb Nyedxjlp -Drive power: 5.5 kW -Pressure: 50 t -Filling opening: W x H 1350 x 760 mm -Bale ejection device: bale dimensions 1200x800x1100 mm -Transport dimensions: 1400/2040/H2880 mm (press can be laid down for transport) -Weight: 2750 kg

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400V Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 x 65 cm Condition: very good! Function tested. FLITS Rental & Sales service: With every machine, we provide a bundle of baling wire (120 wires). Need more baling wire bundles? Request a free quote without obligation. Bjdpfx Ajxp Dnhjdxolp FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for both businesses and individuals. We focus on delivering efficient solutions in internal logistics, cleaning, waste processing, and working at heights. Waste baler, Paper baler, Cardboard baler, Plastic baler, Waste compactor, Recycling, Textile baler, Waste processing.

Condition: used, Year of construction: 2011, machine/vehicle number: 340000674, The HSM V-Press 403 baler is a compact solution for the efficient compaction of waste and recycling materials. This used baler offers excellent performance and is ideal for companies looking to optimize their waste management and save space. With its robust design and user-friendly operation, it is perfect for use in various industries. Technical details: Machine no. 6113.114 Serial number 340000674 Pressing force: 33 kN Power supply: 400 V / 50 Hz Dimensions: approx. 1,200 x 800 x 1,500 mm (L x W x H) Output: 1.1 kW Rated current: 2.6 AMP Bedjunzn Nepfx Adxelp Year of construction: 2011 Weight: approx. 300 kg

Condition: good (used), Technical data: Working length: 2050 mm Max. bending capacity: 18.0 mm Blsdpfx Adsxruvzjxop Pre-bending: 12.0 mm Top roller diameter: 280 mm Bottom roller diameter: 280 mm Conical bending device Hydraulic drop-end bearing Motor power: 7.5 kW Dimensions (length x width x height): approx. 3650 x 1550 x 1650 mm Weight: approx. 7.5 tonnes The seller is not liable for typing or data transmission errors. The machine's condition in appearance, technology, and wear corresponds to its age; used machines are sold without any guarantee.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Technical data: Manufacturer: HSM Model: V-Press 1160 plus Stock no.: 9960 Year of manufacture: 2016 Pressing force: 55 t Drive power: 4 kW Cycle time (idle): 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions (WxDxH): 1700 x 1800 x 2200 mm Weight: 2430 kg Materials: Paper, Cardboard, Film Operating manual is available. Blodpfx Adsxn Ilzjxjp Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the given specifications or any possible errors. Offers are subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is ex-works, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: good (used), Year of construction: 2001, functionality: fully functional, KAMPWERTH SHD 1600 horizontal baler, incl. 3 interchangeable containers 48000x2800x3000 Paper baler // Waste baler // Refuse baler Bedpfx Adsxm Skrjxelp Baler, 1 unit • Type: Kampwerth SHD 1600 • Year of manufacture: 2001 • Unladen weight: 3,500 kg • 15 kW • Dimensions: 5000x2300x3700 mm (disassembled for transport) Container box for baler, 3 units • Year of manufacture: 2001 • Volume: 28 m³ • Unladen weight: 3,100 kg • Filling weight: 12,000 kg • Dimensions: 7000x2400 mm Location: Bielefeld

Condition: new, Ostas 4-roll round bending machine 4R OHS 2070 x 220 Hydraulic side roller infeed Hydraulic folding bearing Hardened rolls Conical bending device Separate control panel Roller length : 2000 mm Top roller diameter : 220 mm Side roller diameter : 180 mm Total motor power : 4+3 KW Weight : 4900 kg Dimensions (mm) : 4050 x 1550 x 1470 (L x W x H) Performance data bending: Bsdpfx Adetvn D Tsxslp 11 mm with smallest inner diameter (5 x top roll) 9 mm with smallest inner diameter (1.5 x top roller) Bending performance data: 9 mm with smallest inside diameter ( 5 x top roller ) 7 mm for the smallest inside diameter (1.5 x top roller) All bending capacities are calculated on the basis of 250 N/mm2 yield strength Material ( ST 37 - ST 42 structural steel ) Special accessories installed: Infinitely variable rolling speed: NC control:

Condition: excellent (used), Year of construction: 2015, Complete Cheese Production Line – High-Quality, Semi-Hard Cheese This fully integrated production line, including controls and electrical systems, was engineered and designed by Asepto Germany and constructed by ASTA Eisman Germany in collaboration with Schwarte. The line features Siemens S7 controls and color touchscreen HMI operation panels for precise and user-friendly operation. Installed in a factory that was not yet fully operational, the line has seen minimal use from 2015 to 2023, primarily for demonstrations, ensuring excellent condition and longevity. Bedpfx Adjxnyr Hoxolp • Year of Manufacture: 2015 • Cheese Weight: 4–5 kg and 10–12 kg • Cheese Types: Semi-hard varieties, including Gouda, Edam, and similar This production line offers a ready-to-use, reliable solution for high-quality cheese manufacturing with minimal additional setup required.

Condition: new, BRAND NEW ROTARY TABLES // ROTARY-SLIDE TABLES Positioning, Stepless Rotation and Interpolation Bjdpfxsm Tv Azj Adxjlp Rotary table sizes: 1,000 x 1,000 // 1,200 x 1,200 // 1,500 x 1,500 // 1,800 x 1,800 // 2,000 x 2,000 // 2,500 x 2,500 // 3,000 x 3,000 // 4,000 x 3,000 mm --- The clamping surface can also be round instead of square - Maximum workpiece weight: 6,000 to 60,000 kg Optional slide axis: 1,000 to 3,000 mm (in 500 mm increments each) Positioning accuracy: ±5 arcseconds Only inquiries from Germany will be answered // Only inquiries from Germany will be processed

Condition: good (used), ##### ATTENTION: SPECIAL PRICE DUE TO BUSINESS CLOSURE ##### Machine type: Two-roller round bending machine for gutter production Condition: good Offer type: used machine Bodpfxjq R Ub Ae Adxelp Technical data: Capacity: 2040 x 1.0 mm Drive type: electrical/mechanical Drive: 0.8 kW Note: with 4 shafts for different gutter diameters: 55, 60, 70, 85 mm Weight: 550 kg The machine is in good and immediately operational condition and can be inspected and demonstrated at our premises. We would be pleased if our offer is of interest to you. Errors, changes, and intermediate sale excepted.

Condition: used, Year of construction: 2018, operating hours: 40,350 h, Baling Press Presona LP 85 VH2 with Cross Tying, Year of Manufacture 2018 Technical Specifications: Manufacturer: Presona Sweden Model: LP 85 VH2 Year: 2018 Drive Power: 2 x 45 kW Bedpfexm Shqsx Adxjlp Operating Hours: 40,350 Effective Operating Hours: Approx. 22,000 Pre-press Force: 28 t Main Press Force: 85 t Feed Opening: 1500 x 1100 mm Bale Dimensions: 750 x 1100 mm Bale Weight: 450–650 kg Theoretical Throughput Volume: 1,200 m³/h Throughput Capacity at 30–100 kg/m³: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil Tank Capacity: 2,000 L Press Transport Dimensions: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: Approx. 27,000 kg The press was removed from ongoing operation. A spare parts package is included in the scope of delivery. Technical documentation is available. Please note: All technical data refer to the manufacturer’s information. We do not assume liability for the specifications provided or for any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Viewings are possible by appointment. Sale only by advance payment, ex works, without warranty or guarantee.

Condition: not inspected (used), Year of construction: 2013, pressing force: 53 t, bale length: 1,200 mm, bale width: 800 mm, bale height: 1,100 mm, bale weight: 400 kg, total width: 2,003 mm, total height: 3,060 mm, total length: 2,120 mm, overall weight: 3,300 kg, transport height: 2,150 mm, We offer a used Strautmann AutoLoad baler, year 2013. The price includes 5–7 containers. The machine has signs of use. According to our customer, the machine is operational, but some welding work is needed on the door. We have not inspected or tested the machine due to time and space constraints. Sold without warranty. Purchased as seen. Bodpfxoxt Nmde Adxelp The machine is located in Switzerland, Canton Thurgau, and must be collected there. It can be loaded onto a truck. Inspection is possible.

Condition: ready for operation (used), Year of construction: 2009, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2009 Bodpfjxnxntox Adxolp Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: Very good! Checked for proper operation. FLITS Rental & Sales service: every machine comes with a bundle of binding wire (120 wires). Need more binding wire bundles? Request a free quote. At FLITS Rental & Sales you choose speed, clarity, and reliability. We think along with you, respond promptly, and ensure you quickly have access to the right machine. You are welcome to inspect the machines at our location: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, so we can take the time to properly inform you and show you the right machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing

Condition: excellent (used), CATALOG NUMBER 7753 Bodjxhddgjpfx Adxjlp TECHNICAL SPECIFICATIONS - max diameter of machined dowels: 130mm - installed bushing: 110mm - max diameter of input material: 160mm - min length of input material: 800mm - max machining allowance per side: 15mm - cutter head drive motor: 15kW - 3 feed speed options + forward/reverse - feed motor: 1.1kW Configuration: - 3 toothed feed rollers - 3-knife cutter head - 3 smooth discharge feed rollers - dimensions (L/W/H): 3100x1400x1500mm - weight: 2100kg ADVANTAGES – made in Poland – 3-knife cutter head – used rounding machine, very good condition Net price: PLN 36,900 Net price: EUR 8,780 based on an exchange rate of 4.2 PLN/EUR (Prices may vary with significant fluctuations)

Condition: new, functionality: fully functional, Year of construction: 2025, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity, while offering the lowest total cost of ownership. The high-quality components used in this machine, as well as the latest version of the BENDtronic® control system, which is installed as standard on all EVO machines, are particular highlights. HAEUSLER EVO 21015 4-Roll Bending Machine / Roll Bending Machine Manufacturer: Haeusler Bjdpexnnf Iofx Adxjlp Type: EVO 21015 4-Roll Bending Machine / Roll Bending Machine Origin: Germany / Switzerland Condition: NEW, Display Machine Availability: 12-14 weeks Capacity: Working width 2100 mm Rolling capacity 12 mm Pre-bending capacity 9 mm Standard Equipment: • Variable swing arm adjustment of the side rollers VSA® • HAEUSLER Hybrid Drive System HHDS® • Movable 21.5" touchscreen control panel including high-end BENDtronic® control • Continuously adjustable rotation speed between 0 and 8 m/min • Machine prepared for remote maintenance • Electromechanical holding system for the rotation of the upper roller • Automatic pressure adjustment of the lower roller • Automatic pressure compensation of the Bottom roll cylinders: Standard cooling system for ambient temperatures up to 35°C • Automated axis optimization • Automatic hydraulic shutdown for roll positioning • Ultra-compact design to reduce or even eliminate foundation costs • Safety ripcord Optional equipment: • Two-roll drive for the top and bottom rolls • Cone bending device for bending conical workpieces • Advanced cooling system for ambient temperatures up to 45°C • Top support for easier bending of large diameters • Side support for assisting with bending of large diameters • Gas pressure accumulator for calibrating previously welded cylinders • BendIT-Office workstation software • Autonomous bending • Machine prepared for quick top roll changes • Interchangeable top rolls with different diameters for bending small-diameter sections • Hardened rolls for bending black and stainless material • Infeed roller conveyor for easy sheet feeding into the machine • Centering device for the infeed roller conveyor, for automatic centering of sheets before bending Not the right machine? As a Haeusler representative, we can customize and offer you the machine you need. Don't hesitate to contact us.

Condition: used, Item: D-9779-Tank 350L Bledpfxsgh Dmls Adxsp Stainless steel round tank, diameter 1200 mm Agitator from top Lid at top, Capacity 350 L Diverse connections mount from side Flat bottom with conus to outlet, 3 legs

Condition: new, Model Name Shark 282 CCS Bledpfxsgvkbcj Adxop