Used Round Baler for sale (7,609)

Condition: used, Year of construction: 2012, Motor: 0.75 kW Technical data: see illustration. Bodpfx Adexctw Sexoww

Condition: good (used), Clamping table, clamping angle, dividing head, rotary table, milling machine table, rotary dividing table -Manufacturer: Stankoimport, round table Bedpfxowxaguj Adxeww -Clamping surface: Ø 250 mm -Center hole: Ø 30 mm -Groove width: 12 mm -Dimensions: 495/340/H150 mm -Weight: 54 kg

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. Bodpju Thhrjfx Adxjww The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), functionality: fully functional, Safe Waste Compactor Bsdpfxsxmbg Ne Adxeww Hydraulic waste compactor that compresses directly into the waste storage container, easily adaptable for standard 1100, 660 (or 770*) litre, 4-wheeled, lidded – most often green – bins (Sulo, Otto, Schäfer, etc.). For bagged and bulk waste Compression ratio is between 1:4 and 1:8 depending on the waste composition, saving approximately 75% in waste transportation costs. Safe design ORWAK bin compactors are robust and can be operated safely. During compaction, it is not possible to reach inside the machine, ensuring operator safety. Both external and internal surfaces are easily accessible for quick and simple cleaning. The waste compactor can be used with all types of standard 1100, 660 (or 770*) litre plastic waste bins, whether with flat or semicircular lids! We can assist with transportation.

Year of construction: 2014, condition: like new (used), functionality: fully functional, Polytype BDM 482 8 colour cup printer 2014 In excellent condition; only 18.500 hours made. Colours : 6 colorheads mounted. up to 8 colors possible. Maximum output/hour : 24.000 cups/hour Minimum cup diameter : 60 mm Maximum cup diameter : 190 mm Minimum cup height : 30 mm Bwedpohbddkjfx Adxow Maximum cup height : 160 mm Uv system : Uviterno Pre treatment : Corona

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, overall weight: 270 kg, warranty duration: 24 months, empty load weight: 265 kg, Robust and compact construction High-quality components with a longer lifespan Above-standard productivity Adjustable bale height (three sizes) Automatic start for efficient compaction Bale trolley for easy transport Material selector for cardboard and plastic Bwedpfsu Tqmdox Adxjw Full bale indicator and service indicator Compliance with EN 16500:2014 safety standards

Condition: good (used), Manufacturer: Comp Tip: SB5 Engine: 2,2 KW Cylinder stroke length: 500 mm Chamber size: 500 x 350 x 400 mm Bjdpfxoh Eic Ao Adxjww

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Bwsdpfswpku Dox Adxjw Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: excellent (used), functionality: fully functional, Technical data for the document shredding system: Manufacturer HSM GmbH + Co KG General data for the two-stage shredder system: Type Duo Shredder 5750 Year of manufacture 2015 Operating hours 3,093 hours Throughput capacity up to 800 kg/hour, depending on material Rated power 30 kW Rated current 62 A Particle cutting size 6 x 40 - 53 mm Fuse protection 63 A gG/gL/C/K Weight of shredder approx. 2500 kg Data on the pre-shredder: Shredder type V 570 Working width of the cutting unit 500 mm Particle size 20 x 155 mm (w x l) Nominal power of pre-shredder 2 x 5.5 kW Bwjdpfx Adewrybrexew Nominal current of pre-shredder 2 x 11.5 A Data on the secondary shredder: Shredder type P 500.2 Working width of the cutting unit 500 mm Particle size 6 x 40 – 53 mm (w x l) Nominal power of secondary shredder 9.2 kW Nominal current of secondary shredder 18 A Security level according to DIN 66399 P-3, O-2, T-3, E-2 Baling press data: Type KP 100.1 Year of manufacture 2015 Operating hours 2,377 hours Pressing force 9 - 12 t Bale weight 40 – 150 kg/bale, depending on material Cycle time 7–16 seconds Feed chute dimensions 450 x 580 mm Bale size 630 x 500 x 400-1000 mm (w x h x l) Triple horizontal binding Press dimensions 3990 x 2225 x 1735 mm (l x w x h) Weight of press approx. 1000 kg Dimensions of entire system, conveyor belt, shredder and press: 9560 x 2071 x 3550 mm (l x w x h) Function description: This is a complete system consisting of a feed conveyor belt, a two-stage shredder and a horizontal baling pres. The material is fed onto the conveyor belt, shredded in two stages and then pressed into stackable bales. A second cutting unit and various motors are available as spare parts for the system. Comments: The documentation (Manual, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Profile bending machine FASTI - Type 2040x2mm -GS identification -Roller diameter 105mm -Max. sheet thickness over entire length 2mm Bedpfjwqzygsx Adxsww -Foot switch -Safety device Dimensions: LxWxH 3x1.1x1.3 meters / Weight 1500Kg Errors / input mistakes excepted

Year of construction: 1993, condition: like new (used), Machine Type Round cup printer Brand Polytype Model BDM400 Year 1993 Bwsdpfxoh Euv Uo Adxow Colours 6 Output/hour 24.000 Minimum cup rim dimensions 70mm Maximum cup rim dimensions 130mm Minimum cup height 35mm Maximum cup height 130mm

Condition: good (used), Clamping table, clamping angle, dividing head, rotary table, milling machine table, rotary dividing table -Rotary table: clamping surface: Ø 120 mm -Groove width: 14 mm -Dimensions: 210/160/H140 mm -Weight: 5.7 kg Bsdpfewuybksx Adxjww

Condition: used, functionality: fully functional, Year of construction: 1997, Very nice hand-operated three-roll bending machine Manufacturer: Fasti Model: 103-20-1.25 Working area: 2040 x 1.25mm According to the nameplate, year of manufacture: 1997 VERY LITTLE USED! The roll surfaces are completely smooth, even if the picture may make it look as though there are "grooves" on the left side. Location: Bremen _____ Our general terms and conditions apply; the seller is not liable for typographical or data transmission errors. The information and images were provided by the owner and approved for publication. The visual condition of the offered items corresponds to their age and the pictures shown. Bwodpowu Euvjfx Adxow The technical condition and wear of the items offered are age-appropriate. Used machines are sold exclusively to commercial customers and without warranty.

Condition: good (used), Manufacturer: MBT Tip: MV-250 S Bwsdpfx Aohzr U Iodxsw Motor: 5,5 kW hopper size: 780 x 600 mm Housing size: 3500 x 1000 x 2200 mm

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Baler Orwak Compactor 3150 Very good condition Bwsdow Rn U Njpfx Adxow

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 25498, roll diameter: 320 mm, roller width: 2,070 mm, TECHNICAL DETAILS Roller width: 2,070 mm Top roll diameter: 320 mm Bottom roll diameter: 320 mm Bsdpfxev Iq Dwj Adxsww Side roll diameter: 260 mm Number of rolls: 4 Bending speed: 0 - 5 Sheet thicknesses Sheet thickness with 5 top roll diameters: 25 mm Sheet thickness with pre-bending: 18 mm Sheet thickness with 3 top roll diameters: 20 mm MACHINE DETAILS Length: 4,700 mm Width: 2,000 mm Height: 2,200 mm Weight: 8,700 kg Operating voltage: 380 V Frequency: 50 Hz Motor power: 26 kW Motor speed: 1 x 5 x 4 d/min

Condition: used, roller (top) diameter: 140 mm, roller length: 2,030 mm, sheet thickness steel (max.): 4 mm, Akyapak 3 roller mill Type 2030 x 140 Roll length 2,030 mm Bjdpfxjwmdw Hj Adxoww Max. plate thickness 3.5 mm Dia. top roller 140 mm ø Machine dimensions (lxwxh) 3,000 x 750 x 1,100 mm Wire grooves 8/12/15mm Price excluding VAT

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Machine weight: 7000 kg Bjdpfjv Amw Nox Adxeww

Condition: new, Type: Motorized Working length: 1.050 mm Roller diameter: 110 mm Pre-bending capacity: 4 mm Bending capacity: 5 mm Bwodpfx Adeug Un Eoxow Motor: 2,2KW Minimum bending diameter: 150mm Upper and lower roller driven by a single gear system. Rollers with SAE 1050 quality certificate of high tensile strength. Conical bending system Induction treated and hardened rollers Wire grooves at the end of the rollers.

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW Bwodpfx Adoxbgg Rexow For technical data, see illustration.

Condition: good (used), functionality: fully functional, machine/vehicle number: 804, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, overall weight: 12,500 kg, 3-roll hydraulic plate bending machine 2500 x 16 mm Manufacturer: KUMLA Type: PV 7 H Serial no.: 804, overhauled in 1987 The machine is of a very robust design and has only been used in single-shift operation. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x H 1900 mm Bwodovxbm Repfx Adxow Working height: 1000 mm Additionally, a staircase platform around the machine can be purchased.

Condition: good (used), Year of construction: 1979, Round vibrator, vibratory grinding system, vibratory grinding machine, vibratory grinding round vibrator, tumbling system, continuous vibrator, vibration conveyor, oscillating conveyor, conveyor trough, spiral conveyor -Manufacturer: OSRO, round vibrator type OS10 -Working container: elastically mounted -Total volume: 600 liters -Outer diameter: 1430 mm -Work basin width: 320 mm -Work basin height: 545 mm -Machine for: deburring, polishing, rounding edges Bwedpfjiqpyujx Adxew -Dimensions: 1570/1430/H1140 mm -Total weight: 1140 kg

Condition: used, Clamping table, clamping angle, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Round table with three-jaw chuck -Chuck size: Ø 315 mm Bedpfot Trw Ssx Adxsww -Spindle bore: Ø 103/28 mm -Dimensions: 460/270/H410 mm -Weight: 123 kg

Condition: used, Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Rotary table: with three-jaw chuck -Chuck size: Ø 160 mm -Spindle bore: Ø 42 mm -Dimension: 510/320/H220 mm -Weight: 50.9 kg Bedpfxoitv A Ej Adxsww

Condition: used, Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Manufacturer: Schmid, rotary table with three-jaw chuck -Type: TWS200 -Chuck size: Ø 200 mm -Dimension: 250/250/H365 mm Bedpfx Adoii E Tnjxoww -Weight: 52 kg