Used Round Turntable for sale (4,812)

Condition: used, Spring actuated self-levelling pallet turntable, capacity 2000 kg Spring actuated turntable, which keeps palletised loads at an optimal working height, using a system of calibrated springs and shock absorbers. No power source or compressed air required. Lowers the risk of fatigue and injury. Reduces the time taken for loading and unloading pallets by over 40%. Fitted with fork pockets for easy relocation. Smooth running ball bearing turntable, which eliminates the need to walk around or stretch over the unit. Height 240mm (compressed), 710mm (extended). Turntable dia. 1100mm. Ledpfozz Ranox Abysru Weight: 160kg. CE marked.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21801014943, empty load weight: 4,150 kg, maximum load weight: 13,850 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,900 mm, loading space width: 2,480 mm, total length: 8,900 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, Year of construction: 2026, Equipment: center pivot plate, - Attention: archive photos! #Chassis turntable drawbar trailer - Outer frame slightly inclined with "Load-Lock" profile for hooking in lashing straps - 9 pairs of additional lashing eyes recessed in the outer frame, 5 t each - Wheel chocks with holder - Aluminium side guards - Steel underrun protection - Quarter mudguards ahead of and behind each axle - with anti-spray mud flaps - 1 row of lashing/stake rails recessed lengthwise in the centre of the floor (from end of front cross member to start of rear cross member), approx. 80/110 mm high, with cut-outs at top and bottom for Fliegl plug-in stakes 80 x 80 mm; at the bottom an angle plate as stop, half open downwards, for inserting stakes 80 x 80 mm - 3 lashing/stake rails recessed crosswise in the floor (cut-outs approx. 63 x 63 mm) across the full width up to the outer frame, approx. 80/110 mm high, with cut-out - 1 aluminium storage box with stainless steel lid, w=600/h=400/d=500 mm, lockable - Container locking: 2 pairs of locking cut-outs recessed in the floor for 1 x 20 ft container, 2 pairs of container locking adapters #Drawbar turntable trailer - Drawbar with certified 40 mm drawbar eye, mechanically length-adjustable by 6 x 100 mm and lockable - Parking sockets for electrics/EBS and air couplings on drawbar #Axles + suspension - SAF drum brake axles - One axle check rope per axle for turning or loading the trailer - Air suspension with raise & lower valve, front and rear separately operable #Wheels and tyres - 235/75 R 17.5" - make at manufacturer's choice - Steel rims in twin configuration, factory silver - TPMS tyre pressure monitoring system acc. to ECE R 141, display in towing vehicle via EBS #Braking system - 2-line compressed-air braking system - Spring-brake parking brake - Duomatic coupling at front, with connecting line to the truck - EBS electronic braking system with EBS socket at front, detachable coiled cable - Attention: the trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! - Drawbar lock release button and double release valve mounted at front turntable - Vehicle stability system - Axle load detection via EBS CAN bus signal, for display in the driver's cab #Floor - Floor for forklift with gross weight up to 4 900 kg - Film-faced plywood approx. 30 mm thick - Premium floor sealing, joints sealed all round #Paintwork - Frame hot-dip galvanised incl. passivation - 15-year warranty against rust-through - Currently without headboard/dropsides and folding stakes, but available as an option #Headboard/front corner stakes - 25 mm aluminium hollow profile, 1 350 mm high, steel front corner stakes, transversely mounted - Headboard additionally lined inside with 1250 mm high film-faced plywood #Dropsides - 25 mm aluminium hollow profile, 600 mm high, fold-down and removable - without tarpaulin groove - Dropsides with Kinnegrip locks, also at front on headboard #Centre stakes - 2 pairs of folding stakes at dropside height, fold-down and removable, make Kinnegrip (flush or nearly flush with dropsides where possible) #Rear wall/rear corner stakes - 1 pair of folding stakes at dropside height, fold-down and removable, make Kinnegrip - 25 mm aluminium hollow profile, 600 mm high, fold-down and removable, with folding step inside Lredpfjz Eg N Dex Abyju - Attention: archive photos!

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Lsdpfx Abozmt U Ejyoru

Condition: defective spare-parts repository (used), functionality: not functional, Year of construction: 1972, * Former Berlin Fire Department truck. * MAN 450 HD-L. Built in 1972. Registration card available. * Engine - Frost damage. Spare engine available. Lrsdpfx Abowlqzcjyju

Condition: used, Round sieve - weight: 780 kg Lsdpfovv Eb Hsx Abyoru - manufacture: Bühler - model: DFDT-31 - year of production: 2005 - capacity: 8-10 t/hour

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, SUPER PRICE!!! NOW ONLY 6,000 EUR!!! Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing its basic structure, except for the computer. A newer, more modern HP computer with a small form factor is included. Max. diameter: 350 mm Max. test piece height: 500 mm (higher is possible, measured in two sections, up to a maximum of 1000 mm) Self-centering of the workpiece: +/- 5 mm Max. weight of the test piece: 40 kg The system has been used very little and has only had two owners. The original owner, from whom I purchased it, was an implant company in Hamburg. It was used there in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password). It is also on the USB stick, perhaps to be installed on another machine at your location. Lrsdpfxszcqy Ej Abyou Accessories are included: the original Taylor Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase individually. A sample/pattern lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight forwarder. It is already securely fastened to them. The Talyrond 265 and the desk will be well-protected for transport with bubble wrap, etc., and wrapped with stretch film, and the system itself is secured with "transport safety screws." Shipping will be at the buyer's expense and will be carried out on two Euro pallets. The measuring system should definitely be set up and put into operation by a Taylor Hobson service technician, who can then recalibrate the system on-site. This is now recommended after a few years. Errors can be made during setup and commissioning. For example, some locking screws are installed for transport, and if you forget to remove them, the system can be damaged when it starts up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, load capacity: 1,500 kg, Equipment: documentation/manual, Used rotating device in very good condition. - Year of manufacture 2016, mobile, rotatable 360° for assembly, welding, etc. - One unit driven, the other unit rotates passively. - CE certified, with documentation. - Adjustable axle distance. - Max. component weight 1500 kg. - Max. diameter 1600 mm. - Max. component torque 2080 Nm. - 2-hand operation. - Optional foot control. - Protection 16 A. - Own weight 670 kg. Lrodpfx Asz S U Rdebyou Like new. 2 units available for sale.

Condition: like new (used), Year of construction: 2004, operating hours: 2,177 h, functionality: fully functional, machine for producing cylindrical logs with a diameter of up to 400 mm and a length of up to 10 m. Lodpfezcgtbsx Abysru

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi11, Stretch Winder Synthesi Freezer -30 IP65 TECHNICAL DETAILS Turntable / base frame / Ø 1500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Lredpfx Abez Iq I Aoysu Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S23SynthesiWaage03, Exhibition machine, like new. SYNTHESI integrated with scale Pallet weighing system integrated in the machine FILM SLIDE TYPE “FE” (ELECTROMAGNETIC BRAKE) Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ TECHNICAL DETAILS: Turntable 1500mm (Optional 1650mm) Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min Lrjdpfxez Ipdvo Abyju F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Lrsdpfx Aez Ipwcobysu Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Condition: excellent (used), Year of construction: 2011, CATALOGUE NUMBER 8016 TECHNICAL DATA - Range of diameters of processed pins: 60-160mm - Max. diameter of input material: 210mm - Min. length of input material: 1000mm - Max. allowance for machining per side: 30mm - Fitted sleeve with a diameter of 90mm - Cutting head drive motor: 22kW - Smooth feed speed adjustment + forward/reverse via frequency inverter - Feed motor: 1.5kW In sequence: - Infeed trough - Toothed pull rollers: 6 pcs - 4-knife cutting head - Smooth pull rollers: 6 pcs - Includes 10 sleeves - Dimensions (L/W/H): 2800x1300x2150mm - Weight: approximately 2200kg Ledpfx Aszrui Ijbysru ADVANTAGES – Manufactured by the Polish brand SAFO – DTR+CE documentation included – Includes sleeves – Used turning machine, very good condition Net price: 98,900 PLN Net price: 23,000 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL Lrodpez Iqnvofx Abyeu 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) Ledpfx Ajz Iqp Tebysru F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: used, Year of construction: 2000, Used Machine Year of manufacture: 2000 Features and Technical Specifications: - For vertical edge processing with edge thicknesses up to 3 mm - With automatic milling feed - With base frame - Electrical connection: 230 V Lrjdezw N Eujpfx Abysu - Compressed air connection: min. 6 bar - Workpiece thickness: max. 45 mm - Tool: r = 2.5 or r = 3

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Lsdpfx Abjz Ipr Hjysru Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, load capacity: 4,000 kg, Equipment: documentation/manual, Sideros Syncrolift Column Lifting and Rotating Device, 4000 kg load capacity, like new condition. Minimum height: 450 mm Lrsdpfx Aoyrz Hnjbysu Maximum height: 1950 mm Travel: 1500 mm Diameter of clamping disc: 800 mm Overall height: 2505 mm Total weight: 1300 kg Torque: 5500 N/m Speed: 0.75 RPM.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23EVA01, Stretch wrapper EVA TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Options: Turntable 1650mm ramp mounting frame Light scanner for black products Lredpsz Ip S Hofx Abysu Other systems available from the Ludwigsburg warehouse.

Condition: excellent (used), Year of construction: 2006, 513 USED KEMPER MINI QUADRO ROUND bun divider-rounder. Line for rolls, ciabatta, and bread. Production: - square and elongated buns - round buns - stamping/marking - 4 rounding drums - moistening station - seeding station TECHNICAL DATA: - year of production: 2006 The price is a net price. Ledozugm Dopfx Abyoru Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: like new (used), functionality: fully functional, 3-axis positioning system, rotating, lifting, and pivoting, 7500 kg load capacity. Lrjdpfx Abezvqwieyeu Condition: absolutely like new, only used for measurement purposes. Position can be set using limit switches. Includes hand-held remote control. Faceplate diameter: 1000 mm. Faceplate speed: 1 RPM, including speed controller. Torque: 5500 Nm. Maximum turning radius: 1700 mm. Tilting range: +/- 180° relative to the horizontal faceplate. Tilting moment: 14500 Nm. Tilting speed: 180°/min. Tilting axis: 200 mm above the upper edge of the faceplate. Lifting speed: 1000 mm/min. Lower faceplate height: 500 mm. Upper faceplate height: approx. 2000 mm. Includes complete documentation, plans, operating instructions, and EC declaration of conformity. New price: approx. €75,000.

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi07, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) Lredjz Iqtfopfx Abyju F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: A-260304, input voltage: 400 V, overall weight: 75 kg, type of input current: three-phase, total length: 1,200 mm, total width: 1,200 mm, control voltage: 230 V, input frequency: 50 Hz, input current: 1 A, Subject: A260304 Hoba rotary table with a deck diameter of 1200 mm. Machine information: Machine direction of rotation: Adjustable during installation. Total machine width: 1.2 meters Total machine height: 0.7 to 1 meter Electrical connection: Power supply: 400 volts, N+PE Power consumption: 3.2 kilowatts Plug type: CEE Form 5-pin 16 Amp (round red plug) Compressed air required: No Machine description: The machine is fully constructed from stainless steel box sections and stainless steel angle sections. The table is driven indirectly by a rubber wheel. The base frame is mounted on 4 swivel casters, 2 with brakes and 2 without. Ledpfx Aoz Erz Esbysru Warranty: 3 months

Condition: used, functionality: fully functional, This is a round filter coffee machine, a Bravilor Bonamat B20 HW. This coffee machine is ideally suited for supplying coffee in large establishments during peak hours, such as care facilities, catering businesses, company canteens, etc. The B HW series is equipped with a separate hot water tap. The containers can be easily transported. The unit has undergone a thorough inspection in our in-house workshop and is fully functional. It has only been operated with a water softening system, so there are no limescale deposits in the system. Lrsdpfx Aszxn Aujbyeu The matching drip tray for dispensing coffee is not shown in the picture, but is also included. The base cabinets shown in the pictures are not included in the offer, but can be purchased as an optional extra. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul / inspection & expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3 standard. Technical data: W x D x H: approx. 1173 x 600 x 947 mm Model with 1 brewing system and 2 containers Separate hot water tap With sight glass Coffee brewing unit Peak capacity: 40 liters Hourly output: approx. 90 liters Brewing time: approx. 14 min. / 20 liters Hot water unit Peak capacity: 4.6 liters Hourly output: approx. 20 liters Frequency: 50/60 Hz Voltage: 400 V 3 N Connection value: 11.2 kW Further information: 1 brewing column in the center 1 coffee container on the right and left, removable With hot water dispensing: Coffee is kept warm in a container Audible signal at the end of brewing With timer Digital display Total and daily counters Descaling system Stainless steel housing Fixed water connection Condition: Used, thoroughly inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to request a consultation, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions (GTC).

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi3, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable Lredpfx Absz Ipclsyou F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Condition: like new (used), functionality: fully functional, load capacity: 1,000 kg, Equipment: documentation/manual, Lifting, rotating 360°, swiveling 360°, also overhead operation Severt L manipulator, 4 units, lifting capacity of 1000 kg and 2000 kg, price per unit PRODUCT TYPE S10 TYPE CODE S10.1-1HH 1000 kg / 2000 kg LIFTING CAPACITY (KG) 1000 / 2000 kg LIFT (MM) 1000 ARM LENGTH (MM) 1500 / 2000 Torque CLAMPING PLATE (NM) 1400 BENDING MOMENT Lsdszk Rdxepfx Abyjru SUPPORT ARM (NM) 3000 FREQUENCY CONVERTER yes LIFT DRIVE hydraulic SELF-WEIGHT (KG) 1700 All machines come with documentation and operating instructions. Price per unit.