Used Rod Machine for sale (66,344)

Condition: used, Year of construction: 2002, Voltage: 400V / 50/60Hz / 3 phases Machining method: Immersion Maximum workpiece size: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table dimensions: 900x600 mm Distance from floor to table: 900 mm Total dielectric fluid volume: 1200 L Axes X, Y, Z, U and V Travel ranges X, Y, Z: 550 x 350 x 400 mm Travel ranges U, V: 550 x 350 mm Collision protection: Axes X, Y, U, V, Z Tapered cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (Option 0.1/0.2/0.3 mm) Wire guide type: Closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 kg (P5) Hsdpfxoza U Nle Ab Eer Dielectric fluid Paper filter: 2 cartridges Dielectric fluid temperature: +/- 1°C Total volume of ion exchange resin: 20 L Maximum injection pressure: 20 bar Generator: Dual source Isopulse Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 microns Ra Measuring system: Glass scales Measuring resolution: 0.5 microns Servo motors: AC type All technical specifications are subject to change without notice; errors and omissions excepted. The machine was fully functional until it was dismantled. Warranty is excluded.

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 3,000 mm, total width: 2,300 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 560 mm, workpiece length (max.): 800 mm, type of input current: AC, overall weight: 2,500 kg, input voltage: 400 V, positioning accuracy: 0.001 mm, Equipment: cooling unit, documentation/manual, CHMER A422S Wire EDM Machine Year of manufacture: 2008, used Travel in X: 400 mm Travel in Y: 250 mm Travel in Z: 220 mm Maximum workpiece size: 800 x 560 x 215 mm Maximum workpiece weight: 250 kg Travel in U x V: +/- 30 mm Maximum taper angle: +/- 14.5° / 80 mm Wire diameter: 0.15 to 0.3 mm Axis drive system: AC servo motors Glass scales in X and Y axes Achievable surface accuracy: RA 1.6 µm Anti-electrolysis generator Hsdezhvhwspfx Ab Esr CNC control: FANUC compatible 15“ TFT touch screen monitor Handheld remote control Automatic wire threading with thermal wire cutting, Threading without water jet in 6 seconds Dielectric cooler Block for automatic vertical and conical wire alignment Documentation in English Connection: 400 V, 3-phase, 13 kVA Dimensions (L x W x H): 230 x 300 x 200 cm Machine weight: 2,500 kg Optional Hirschmann clamping frame: € 2,000.00 Commissioning, price based on effort Basic training, price based on effort

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 3,000 mm, total width: 2,300 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 560 mm, workpiece length (max.): 800 mm, type of input current: AC, overall weight: 2,500 kg, input voltage: 400 V, positioning accuracy: 0.001 mm, Equipment: cooling unit, documentation/manual, CHMER A422S Wire EDM Machine Hsdpfx Abozhvhde Esr Year of manufacture: 2008, used Travel in X: 400 mm Travel in Y: 250 mm Travel in Z: 220 mm Maximum workpiece size: 800 x 560 x 215 mm Maximum workpiece weight: 250 kg Travel in U x V: +/- 30 mm Maximum taper angle: +/- 14.5° / 80 mm Wire diameter: 0.15 to 0.3 mm Axis drive system: AC servo motors Glass scales in X and Y axes Achievable surface accuracy: RA 1.6 µm Anti-electrolysis generator CNC control: FANUC compatible 15” TFT monitor Handheld remote control Automatic wire threading with thermal wire cutting Threading without water jet in 6 seconds Dielectric cooler Block for automatic vertical and conical wire alignment Documentation in English A horizontal rotary axis (6th axis) is included. This was removed due to lack of need and was not in use. Connection: 400 V, 3-phase, 13 kVA Dimensions (L x W x H): 230 x 300 x 200 cm Machine weight: 2,500 kg Optional Hirschmann clamping frame: €2,000.00 Commissioning, price based on effort Basic training, price based on effort

Year of construction: 2006, condition: used, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling cutter Corner rounding unit Grooving unit Pressing system Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Hjdpfx Aey Ur Hlsb Esr Number of motors: 2 Positioning via NC Edge processing unit 2: Rough milling, top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522

Year of construction: 2017, condition: as good as new (ex-display), › ideal for all shirt fabrics (FX 1000) 1000mm belt › seperate feeding and transport belts, "cool feeding" Hsdpfopfa Nhex Ab Eer › special insulation, little heat radiation › upper and lower heating individually controlled, with temperature limiters (1000 mm - 39 .37 inch long) › seperate heating zones selectable, TOP (shirt), BOTTOM (outerwear) › special speed-heat up function, for fast heating of the machine › touch screen for program storage and service functions › optional air and compression cooling › failure diagnostic system

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 986U042310279, Size B2, water-based coating unit for digital finishing, corona unit, high capacity feeder, high capacity stacker. Machine can be installed inline with an HP Indigo 12000 or 15000. Hodjx Apdnopfx Ab Ejr

Condition: new, Year of construction: 2026, total width: 2,100 mm, total height: 2,600 mm, working range: 3,800 mm, total length: 5,500 mm, compressed air connection: 10 bar, warranty duration: 12 months, overall weight: 2 kg, input current: 10 A, working width: 3,800 mm, working height: 1,700 mm, power: 4 kW (5.44 HP), PALLETMAX: Less workforce more productivity! Hjdefci D Nepfx Ab Eor Make your customized pallets easily! Machine has replaceable pallet templates. Templates can be changed within 10 minutes. With this solution, you can produce many different kind of pallets. Do not need to adjust the entire machinery and spend a lot of time for adjusting. The best and easiest way to produce different pallets. ProductionAnalytics – are digital solution specifically designed for pallet production companies to automatically collect, display, and interpret production data. This solution offer flexibility for operators, line leaders, and executives by displaying data according to their needs on various devices, from screens on factory floor walls to iPads and mobile devices. The main purpose of ProductionAnalytics solutions is to improve the visibility and productivity of factories through 24/7 monitoring of production machines. This continuous monitoring allows executives to easily identify downtime and take action to minimize them, thereby enhancing production quality, view production volumes, reducing machine downtime and more. UPDATE: Pallet stacking robot ABB IRB6700 can be integrated in PALLETMAX machine for automatic pallet stacking.

Condition: new, Year of construction: 2026, total width: 10,000 mm, total height: 2,700 mm, working range: 2,500 mm, total length: 10,000 mm, compressed air connection: 10 bar, type of input current: three-phase, warranty duration: 12 months, overall weight: 4 kg, input current: 18 A, working width: 1,700 mm, working height: 180 mm, feed length X-axis: 2,500 mm, feed length Y-axis: 1,700 mm, power: 11 kW (14.96 HP), 1 Operator pallet production equipment is designed to produce standard and non-standard pallets up to 2500 mm long. The boards are loaded into the pallet template manually. Pallets are easily programmed and saved in the Windows operating system. Automatic pallet unloading make the operator's work easier, there is no need to unload pallets manually. After setting the number of pallets to be loaded, the ABB Robot will unload the pallets automatically. Installation capacity per 1 shift: 300 – 500 pallets. Hedpfx Abowm Ihce Eor

Condition: used, functionality: fully functional, total height: 190 mm, total width: 115 mm, total length: 180 mm, input voltage: 380 V, Bottle unloader for 1-liter AF standard bottles, with a capacity of 2,000 to 20,000 bottles per hour. The machine operates from right to left. No bottle transport chain is available; only a drive for the conveyor belt is provided. Hedpfszd Th Tex Ab Eor

Year of construction: 1990, condition: used, Weigl ER - 1500 Brief description: Start hole eroding machines Waldmann & Description: Immediately available from site : Start hole eroding machines Waldmann & Weigl Type ER - 1500 Year of manufacture 1990 table size 500 x 500 mm installation height 400 mm twist drill 0,1 - 20 mm taps M 2 - M 20 electrodes 1 - 12 mm drilling machine Interkrenn Economy 280 S height adjustment 700 mm throat 180 mm quill stroke 80 mm speed range 120 - 2580 rpm Tool holder MK 2 Hsdpfx Abenzh Ivj Ejr

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox PrimeLink C9070’ Object of sale: 1 x Xerox PrimeLink C9070 with the following equipment: incl. Fiery Server EX C9065 incl. Paperdeck A-CF01 incl. booklet finisher A-FN13 incl. SquareFold with front trim incl. Vivid kit for changing. Colours: White, gold, silver, transparent incl. fluorescent kit for changing colours. Colours: fluorescent cyan, magenta, yellow Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Meter readings: Total: Approx. 1,189,345 pages Colour: Approx. 1,049,230 pages Black: Approx. 140,115 pages Condition: Hsdpfxovtycyj Ab Ejr This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 91160677-0-001, Pasteurizer in excellent condition, worked in a winery Hedpjvq Snisfx Ab Eer

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,425 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 220 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, empty load weight: 2,450 kg, Machine completely cleaned and overhauled. 0.1 mm option available. Hjdpfx Asy Tvtmob Eor Available for viewing at our facilities in Semsales, Switzerland.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,500 mm, total height: 1,900 mm, total length: 5,000 mm, Oy Foudila Ab is a company based in Kaskinen, Finland, with over 45 years of experience in wood handling equipment. For the past 15 years, we have also been active in the pallet industry and have developed numerous machines for nailing, automatic feeding, and stacking of wood over the years. We manufacture both standard machines and custom-tailored solutions to meet customer requirements. The DNM1600 is a flexible, compact, and efficient pneumatic nailing machine designed for the production of decks in the pallet industry. The user-friendly program allows for very rapid changeover, and the machine can store settings for over 100 different deck specifications. It features Bostitch nail guns equipped with nail magazines for jumbo coils with indicators. The machine enables the manufacturing of asymmetrical decks and is fitted with flexible cassettes for boards. A protective cover ensures noise reduction and safe operation. The machine is operated via a 10-inch touchscreen and utilizes a Beckhoff control system. Standard machine specifications: - Deck board: Length 600–1600 mm, width 75–125 mm, height 16–28 mm - Stringer: Length 600–1500 mm, width 50–125 mm, height 16–28 mm - Deck/Stringer pallet size: Length 600–1600 mm, width 600–1500 mm A two-way pallet kit is available as an additional option, allowing the production of stringer pallets/two-way pallets with a maximum stringer height of 100 mm. Capacity: - 3 decks/min (with 5 deck boards) Machine dimensions: - Length: 5000 mm, width: 2500 mm, height: 1900 mm The machine is CE-marked. The machine can be equipped with automatic board feeding and automatic deck/pallet stacking. Hodpey Izb Ejfx Ab Esr For more information, pictures, or videos, please get in touch.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 440 mm, total height: 1,900 mm, total length: 5,000 mm, Oy Foudila Ab is a company based in Kaskinen, Finland, with over 45 years of experience in wood handling equipment. For 15 years, we have also been active in the pallet industry and over the years have developed a wide range of machines for nailing, automatic feeding, and stacking of timber. We manufacture both standard machines and customized solutions tailored to customer requirements. DNM3500 is a flexible, compact, and efficient pneumatic nailing machine for the production of deck or stringer pallets (2-way pallets). The machine features motorized conversion for stringer channels. Its user-friendly software enables very rapid changeovers, and the machine can store settings for over 100 different deck formats and pallets. It uses Bostitch nail guns equipped with nail magazines for jumbo coils, including indicators. There are options for producing asymmetric deck/stringer pallets. The machine is fitted with flexible cassettes for boards. An acoustic enclosure provides noise reduction and ensures safe operation. The machine is operated via a 10-inch touchscreen. Beckhoff control system. Standard machine specifications: - Deck board: length 600–3500 mm, width 75–125 mm, height 16–50 mm - Stringer: length 600–1500 mm, width 50–125 mm, height 16–100 mm - Deck/stringer pallet size: length 600–3500 mm, width 600–1500 mm Capacity: - 3 decks/min (with 5 deck boards) Machine dimensions: Hsdpfjy Izblox Ab Ejr - Length 5000 mm, width 4400 mm, height 1900 mm The machine is CE-marked. The machine can be equipped with automatic board feeding and deck/pallet stacking systems. For more information, pictures or videos, please contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 5,200 mm, total height: 2,000 mm, total length: 3,800 mm, Oy Foudila Ab is a company based in Kaskinen, Finland, with more than 45 years of experience in woodworking machinery. For the past 15 years, we have also been active in the pallet industry and have developed numerous machines for nailing, automatic wood feeding, and stacking during this time. We manufacture both standard machines and custom solutions – as standalone units or complete production lines, entirely according to customer requirements. The LNM-355 is a flexible, compact, and highly efficient pneumatic nailing machine for producing blocks for pallet manufacturing. The user-friendly control program allows for extremely fast changeover times; furthermore, settings for over 100 different block variants can be stored. Five pneumatic nailers equipped with jumbo coil magazine systems and nail detection indicators are installed. Blocks consisting of 2–5 sub-blocks per block can be produced. Between 1 and 9 nails can be inserted per nailing pattern. The machine features a large board cassette magazine. A soundproof and safety enclosure ensures quiet and safe operation. Control is performed via a 10" touchscreen with Beckhoff control system. The adjustment of block positions can be done manually or automatically. A large buffer for finished blocks is provided. Hedpfx Abjy Iy Udo Ejr Optionally, the machine can be equipped with an optimized block cutter, automatic block infeed, automatic board feeding, and automatic block stacking. Material dimensions for the standard machine: - Boards: Length 500–3500 mm, Width 60–150 mm, Height 16–32 mm - Blocks: Length 60–150 mm, Width 60–150 mm, Height 50–125 mm Performance: - 35 blocks/minute Machine dimensions: - Length 3800 mm, Width 5200 mm, Height 2000 mm The machine is CE-certified. For further information, pictures, and videos, please do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,450 mm, total height: 1,790 mm, total length: 3,470 mm, Oy Foudila Ab is a company based in Kaskinen, Finland, with over 45 years of experience in developing equipment for the wood processing industry. For the past 15 years, we have also been active in the pallet industry and, over the years, have developed numerous machines for nailing, automatic wood feeding, and stacking. We manufacture both standard machines and customized solutions tailored to our customers’ requirements. Foudila Deck Nailing Machine DNM-153 Hsdpfx Aey Iy I Deb Esr The Foudila Deck Nailing Machine DNM-153 is a compact, flexible, and efficient unit for the production of boards for the pallet industry – offering outstanding value for money. Thanks to its high production speed, user-friendly design, and large board magazines, the machine is ideal for manufacturing both standard and custom products in small and large batches – all with just one operator. More than 1,000 decks can be produced per shift. The machine is equipped with three nailing units, each with magazines for large nail coils. Each nailing pattern can contain 1–3 nails and can be stapled if required. Boards are loaded into large buffer magazines – three cassettes for blocks/bottom boards and one cassette for deck/top boards. The machine is controlled and programmed via a modern, user-friendly software on a 10" touchscreen with Beckhoff control technology. Due to its compact design, the machine requires only a very small footprint in production and allows for quick and uncomplicated installation, as it can be delivered fully pre-assembled. The machine can, of course, be equipped with a finished goods conveyor, an automatic stacker, and an automatic board feeder. These options can also be retrofitted, enabling step-by-step investment. Please feel free to contact us for more information, technical specifications, and pricing.

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: J20M0956, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, controller model: MITSUBISHI ADVANCE, No reserve price – guaranteed sale to the highest bidder! Placing a bid constitutes a binding commitment to collect the machine on time between 04.05.26 and 07.05.26. TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 350 mm Travel Z-axis: 300 mm Travel U and V axes: ±75 mm Taper angle at workpiece width: 15° Maximum workpiece dimensions: 1,050 x 800 x 295 mm Maximum workpiece weight: 1,500 kg Table dimensions: 780 x 630 mm Permissible wire diameter: 0.07 – 0.3 mm Feed rate X- and Y-axes: 1,300 mm/min MACHINE DETAILS Control unit: MITSUBISHI ADVANCE Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,000 x 2,500 mm Weight: 4,000 kg EQUIPMENT Coolant system Transformer Documentation Note: The machine can be transported with a standard truck. External reference: 58 Hsdpfxjyr Niqj Ab Ejr

Condition: reconditioned (used), Year of construction: 2013, Equipment: fridge, AGIECHARMILLES CUT400 wire EDM machine, manufactured in 2013. Travel: X 800, Y 550, Z 510, U 800, V 550 mm. Maximum taper: 30°/510 mm. Maximum workpiece dimensions: 1,300 x 1,000 x 510 mm. Maximum workpiece weight: 3,000 kg. Threading height up to 510 mm. Available wire diameters: 0.10 - 0.33 mm. Best surface finish: 0.20 Ra. Wire spools up to 25 kg. CHILLER UNIT. Dielectric volume: 1,700 liters. Hodpfx Aozbimhsb Eor INCLUDED SOFTWARE: TAPER-EXPERT, CT-EXPERT, PROFIL EXPERT, POWER EXPERT, SURFACE EXPERT. Wide selection of technologies for the most common workpiece/wire materials.

Condition: like new (used), Year of construction: 2019, CAP 30 APPLICATOR 1000 FOR HELICAP 23 PRO: YOM 2019 VERSION 400v Hodpfx Abjyynd Rj Esr 9.000 RUNNING HOURS NEW CONDITION THE MACHINE IS IN PRODUCTION TILL MAY 15TH.

Condition: like new (used), Year of construction: 2016, TETRA PAK CARDBOARD PACKER CBP 32 V400 NEW CONDITION, FOR MULTI CARTON FORMATS LAST VERSION 600V YOM 2016 5477 RUNNING HOURS ONLY!! NORDSON PROBLUE FLEX UNIT NEW CONDITION LOCATION - POLAND Hodpfx Aboylny Us Ejr READY FOR SHIPPING

Condition: good (used), functionality: fully functional, Welding line with logistics (URBAN year 2008 / SOENEN year 2018) URBAN welding line – €10,000 Hjdpfx Aov Enw Neb Eer SOENEN welding line with logistics – €25,000

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 331965, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, wire diameter (max.): 0.25 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 250 mm Z-axis travel: 200 mm (U/V) axis travel: 400 x 250 mm Taper angle: +/- 30° at 200 mm height Workpiece weight: 500 kg Workpiece height (max): 200 mm Workpiece width (max): 500 mm Workpiece length (max): 850 mm Hsdpjyz Rxaofx Ab Ejr MACHINE DETAILS Standard wire guides: 0.25 mm Dimensions & weight Dimensions (L x W x H): 1,800 x 1,600 x 2,180 mm Machine weight: 2,190 kg Injection pressure upper nozzle: 0 - 11.5 bar Injection pressure lower nozzle: 0 - 11.5 bar

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 350900, workpiece weight (max.): 1,000 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, wire diameter (max.): 0.25 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 250 mm Travel Z-axis: 400 mm Travel U-axis: 400 mm Travel V-axis: 250 mm Workpiece weight: 1,000 kg Workpiece height (max.): 400 mm Workpiece width (max.): 500 mm Workpiece length (max.): 850 mm Hedpfx Aeyz Rvlsb Eer Taper angle: +/- 30° at 400 mm height MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,600 x 2,230 mm Machine weight: 2,500 kg Standard wire guides: 0.25 mm EQUIPMENT Collision protection in X/Y/U/V/Z

Year of construction: 1990, condition: good (used), I sell the door production machine MAKA, year 1990. Combined oscillating mortiser and drilling machine. Hsdpfjgiwl Dox Ab Ejr Available immediately