Used Rod Shear for sale (21,575)

Condition: excellent (used), Year of construction: 1995, Schroeder HS 2000/1.0 Manual Guillotine Shear Specifications: Manufacturer: Schröder Model: HS 2000/1.0 Year of Manufacture: 1995 Working Length: 2000 mm Hodpfx Aaowhf Ntscsfn Cutting Thickness: 1.25 mm Collecting Tray Rear Paralleling Device via Handwheel Location: Arrives at Warehouse 54634 Bitburg - Available at Short Notice -

Condition: used, Year of construction: 1997, sheet width 3230 mm plate thickness 2.5 mm thickness at "Niro-steel" 1.5 mm no. of strokes 28 - 42 Hub/min cutting angle 1.60 Grad table height 820 mm distance between columns 3540 mm Control ELGO 87P engine output 6.8 kW weight of the machine ca. 3410 kg. range L-W-H 4070 x 2070 x 1400 mm from a maintenance workshop including special accessories (!!) Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - NC electro-motorized back stop - including NC ELGO "TYP 87P" digital control unit * adjustable from the front right * with target/actual value position input * continuous adjustment over the entire travel range * rough adjustment via push buttons * protection of the limit values ??with limit switch - "Duo-Cut" drive with two dynamic, powerful gear motors - support table with recessed grips - hold-down bar with hard rubber strip - all-steel knife with two cutting edges - selector switch for single and continuous stroke - 1x freely movable foot switch - safety device at the rear - original operating instructions Hfodpfx Aaexacd Necen Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts - 1x extra long side stop, including support foot + digital stop - 2x extra long, front support arms * with "SLIDING" mount - for easy moving

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Seldom used guillotine shear, only occasionally for 1.5 mm sheet thickness. Stroke rate: 56/min. Capacity (Rm 400/mm): 3.5 mm. Rated power: 4.0 kVA. Weight: 860 kg. Hjdpfxoxal Uwe Aacsfn

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Usable length: 1030 mm Max. sheet thickness: 2.5 mm - Pneumatic hold-down device - Front support arms 1000 mm - Digital back gauge 750 mm - Right-angle stop - Sheet support device - Forward sheet slide Hfsdpfjv Tzphex Aacsn - Rear area protection with protective cage - Foot switch The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately.

Condition: good (used), You are bidding here on a brand-name guillotine shear from the well-known German manufacturer Schröder. Device features: - Cuts up to 2.5 mm steel according to the nameplate - Working length: slightly over 2.5 m - Back gauge: 750 mm - Side/winkel stop - Sheet metal chute - See pictures: machine has not been refurbished - Foot pedal Hjdpfx Aaow U Sryocsfn - Weight: see image - In proper condition You will receive an invoice with VAT shown separately. Forwarding/shipping can be arranged upon request. Free loading as shown in the pictures. Inspection and test run possible by appointment via phone. Payment in cash upon collection. If you have any other requests, please call me briefly – thank you. Collection should take place within 8 days after end of auction. Location: 97261 Güntersleben Item number: 250801

Condition: new, Year of construction: 2025, power: 2.2 kW (2.99 HP), ABKANTBANK technology KRUSE, Free delivery up to 150km. YOUR competent partner for SHEARS and BENDING BENCHES. We are your contact for high-quality sheet metal processing. Appropriate machines can be demonstrated if required, along with expert advice and professional instruction. We advise you individually - according to your wishes and look forward to your inquiry. Plate shears 3000/1.2mm Hydraulic GLT3050 Hfedpfx Aajtctm Hecen - Working length 3050mm - Stable and robust design for steel plates up to 1.2mm - Large cast iron work table - Open design suitable for endless cuts - Back gauge with scale - Declaration of conformity - CE mark Dimensions: Length: 3500mm Width: 750mm Height: 1150mm Weight: approx. 1000 kg Passage: 80mm - Motor power 2,2 kW - Oil HL 46 - Compressive force 4t - Operating pressure 120-150 bar Shipping within Germany 330€ All prices are subject to 19% VAT. Collection by the customer is possible Cash payment on delivery

Year of construction: 2000, condition: ready for operation (used), Working width: 2550mm, max. sheet thickness: 3mm, cutting angle: 1.7°, stroke rate: 34/min, power: 4kW, weight: approx. 3000kg. The machine has been calibrated several times, but still has inaccuracies that cannot be rectified. Documentation available. On-site inspection is possible. Hjdpfx Aasv Extujcofn

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Hjdsxabc Ropfx Aacofn Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: used, Year of construction: 1999, sheet width 3000 mm plate thickness 3 mm 3 support arms Hsdpor Ngtiefx Aacofn 1 angle stop pneumatic hold-down device Backgauge to be operated by hand

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, sheet thickness steel (max.): 3 mm, back gauge: 1,000 mm, back gauge travel distance Z-axis: 1,000 mm, cutting length (max.): 3,200 mm, Selling a Schröder guillotine shear Model: MHSUV 3200/3.0mm Hsdpfxovzh Tco Aacsfn with electric backstop up to 1000mm (see display) The guillotine shear has a sheet metal holding device for thin sheets to prevent ripples when cutting. The special thing about this guillotine shear is that the cutting material is placed at the front, which is rare with this size arrangement. Particularly advantageous for a smaller workshop. The control has a piece goods counter, etc. The knife cuts perfectly and the backstops work absolutely precisely. The guillotine shear is only being sold because we bought a 4-meter guillotine shear. Viewing and testing expressly desired! Sold without any guarantee or return! Price plus VAT

Condition: used, You are bidding here on a branded guillotine shear from the renowned German manufacturer Schröder. Machine specifications: Hsdpfeww E Tkox Aacofn - Cuts up to 4 mm steel (see type plate) – suitable for aluminium and other materials - Hydraulic cutting (not electric) – higher quality machine - Working length: approx. 2.5 m - Support arms positioned in front of the machine due to space constraints - Rear gauge approx. 1 m - Side/Wedge stop - Work surface with brushes (protects the sheet metal) - Sheet support system - An invoice with VAT shown will be provided - Optional: 2 pairs of spare blades Also available: Press brake from the top manufacturer RAS (Reinhardt Maschinenbau Sindelfingen) - Bending length: slightly over 2 m - Sheet thickness: 3.5 mm steel - Swiveling control panel - Weight approx. 2300 kg - Depth stop and additional rails (see pictures) - Segmented upper beam (new price approx. €6,000 – just for the segments) The press brake comes from a public institution, regularly serviced and well-maintained. Transport can be arranged upon request. Free loading as shown in the photos. Inspection and test runs are possible by prior telephone arrangement. Payment in cash upon collection. If you need any further assistance, please call me – thank you! Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Free loading as shown in the photos. Inspection and test runs are possible by prior telephone arrangement. Payment in cash upon collection. If you need any further assistance, please call me – thank you! Collection should take place within 8 days after the end of the auction. Location: Eisingen (3 minutes from the motorway) Article number:

Condition: new, Year of construction: 2025, ABKANTBANK-Technik Halver, YOUR competent partner for BENDING MACHINES and guillotine shears. We are your contact for high-quality sheet metal processing. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we respond to the needs of our customers on site and see ourselves as an extension of production. Appropriate machines can be demonstrated if required, along with competent advice and professional instruction. We advise you individually - according to your wishes and look forward to your inquiry. Plate shears 2500/1.2mm - Working length 2500mm - Stable and robust construction for steel plates up to 1.2mm - Large cast work table - Open design suitable for continuous cuts - Back stop with scale - Declaration of conformity - CE mark Hfjdpfxsnxlndj Aacen Dimensions: Length: 3000mm Width: 750mm Height: 1150mm Weight: approx. 600 kg Clearance: 8cm Shipping within Germany 360€ All prices are subject to 19% VAT. Pick up yourself Cash on delivery Other dimensions 1000mm and 3000mm on request Contact:

Condition: good (used), Year of construction: 2008, sheet thickness steel (max.): 4 mm, cutting length (max.): 1,530 mm, For sale: 1 piece used motorized guillotine shears Manufacturer: Schröder Model: MHSU 1500/4.0 YEAR OF MANUFACTURE: 2008 Hfedpfx Aetumbyeacjn Effective length: 1.530mm Working height: 800mm Cutting capacity steel 400N/mm²: 4.0mm Mass: 940Kg Incl. back gauge, sheet lifting device, light barriers, protective housing and documentation. The guillotine shear can be inspected in our warehouse in 09599 Freiberg.

Condition: used, Year of construction: 1996, sheet width 2040 mm plate thickness 4.0 mm ST plate thickness 6.0 mm ALU thickness at "Niro-steel" 2.5 mm distance between columns 2100 mm no. of strokes ca. 32 Hub/min cutting angle 2.0 ° table height ca. 820 mm Control SCHRÖDER / ELGO total power requirement 5.5 kW weight 3250 kg range L-W-H 2400 x 1400 x 1100 mm From a maintenance workshop Current new price approx. 35.000 euros Special price upon request The MSS motorized guillotine shear was developed for sheet metal and plastic processing. With these shears, you can effortlessly produce clean cuts in series. The MSS "oscillating cut" is the elegant and powerful way to cut. Thanks to the oscillating cut technology, the applied force is optimally converted into a cutting movement, giving the machine power reserves. Features: - Robust, motorized swing-cut guillotine shears - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - NC electro-motorized backgauge * with SCHRÖDER / ELGO NC control unit - Manual cutting gap adjustment * Centralized - adjustable with a simple handle - 1x hold-down bar - 1x sturdy 1.000 mm side stop - including T-slot and mm scale - 2x front support arms 1.000 mm - Grip recesses in the support table - 1x freely movable foot switch - Rear sheet chute - Operating instructions Hfedpfx Aaexaa Edecen

Condition: new, Year of construction: 2025, Plate shears / guillotine shears 2500mm / 1.2mm NEW The stable construction creates an ideal prerequisite for precise cutting of sheets up to 1.2 mm thick. Available lengths are from 1.30M to 2.50M. Prod Masz machines are synonymous with precision and durability. Our guillotine shears meet all requirements for a precise cut with high productivity. Advantages: high cutting performance, stable steel construction, perfect, is made with the technology of CNC Technical specifications: - Max. Thickness of the cut sheet 1.2mm, - Max. Working width: 2500mm the equipment includes a stop for setting the cutting depth and a frame for holding the sheet Dimensions: Length: 2900mm Width: 750mm Height: 1150mm Weight: approx. 600 kg Price: 7400 euros Delivery date: every week We look forward to your inquiry!! Hedoc I T Rkjpfx Aacsfn

Condition: used, From a business closed some time ago, we offer the following folding machine: Schröder AKV 250 bending brake Bending capacity slightly over 2.5m Bending capacity in steel – 1.5mm, more for aluminum Hedpfx Aastul A Tscefn Foot-closing device Angle display Optional back gauge or other accessories such as segmented top beam, etc. available Schechtl MT 250 guillotine shear Depth stop Sheet extraction table Cutting length slightly over 2.5m Cutting thickness 1.25mm Alternatively, several other guillotine shears from Schröder or Schechtl are available Additionally, we have many more of these machines in stock, as well as equipment and tools for sheet metal processing.

Condition: new, Year of construction: 2025, ABKANTBANK-Technik Halver, YOUR competent partner for SHEARS AND BENDING MACHINES We are your contact for high-quality sheet metal processing. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we respond to the needs of our customers on site and see ourselves as an extension of production. Appropriate machines can be demonstrated if required, along with competent advice and professional instruction. We advise you individually - according to your wishes and look forward to your inquiry. Plate shears 2000/1.2mm - Working length 2050mm - Stable and robust construction for steel plates up to 1.2mm - Large cast work table - Open design suitable for continuous cuts - Back stop with scale - Declaration of conformity - CE mark Dimensions: Length: 2500mm Width: 750mm Height: 1150mm Weight: approx. 500 kg Clearance: 8cm Shipping within Germany 360€ Hodpov Nwx Rsfx Aacjfn All prices are subject to 19% VAT. Pick up yourself Cash on delivery Other dimensions 1000mm and 3000mm on request Contact:

Condition: used, Year of construction: 2002, sheet width 3230 mm plate thickness 3.00 mm thickness at "Niro-steel" 1.75 mm no. of strokes 34 Hub/min cutting angle 1.60 Grad Hjdpexaaq Hsfx Aacjfn table height 820 mm distance between columns 3540 mm Control POS 100 air pressure 6.0 bar engine output 6.8 kW weight of the machine ca. 3510 kg range L-W-H 4070 x 2070 x 1400 mm Current new price including accessories approx. 70.000 Euro From a maintenance workshop Very good condition (!!) Special price upon request Features: - Robust / motorized swing cut guillotine shear - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - NC electro-motorized backgauge * With SCHRÖDER NC POS 100 control unit * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Coarse adjustment via pushbuttons * Limit value protection with limit switches - "Duo-Cut" drive with two dynamic, powerful gear motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel blade - 1x side stop with T-slot and digital mm scale - 2x extended sheet support arms - Selector switch for single and Continuous stroke - 1x freely movable foot switch - Rear safety device (side guards) - Original operating instructions Optional accessories included: - Pneumatically controlled sheet support device for thin sheet blanks * Sheet removal / sheet slide to the front (operator side)

Condition: new, Year of construction: 2025, Heavy-duty hydraulic guillotine shear for universal use for trade and industry. With the hydraulic table shear GLT from Prod-Masz you can make the perfect cut with every job. - The extending table makes it easier to carry large-sized metal sheets on the table - Support table with graduation - robust and compact steel construction - high quality, durable steel knives - extremely stable and heavy cast iron construction - Ground and hardened guillotine shear knives Hfsdpfoc I T E Tox Aacsn - Back gauge system with Scala - CE approved quality - Declaration of conformity - for steel plates up to 1.2mm - Open design suitable for endless cuts - Max. Working width: 3000 mm - Motor power 2.2 kW - HL 46 oil - pressure force 4t - Operating pressure 120-150 bar - has hydraulic compensators from the cutter bar upwards Dimensions: Length: 3500 mm Width: 750 mm Height: 1150 mm Weight about 1000 kg We are looking forward to your contact! We issue the invoices with 0% (intra-Community delivery)

Condition: new, Year of construction: 2025, ABKANTBANK-Technik Halver, YOUR competent partner for BENDING MACHINES and SHEARS. We are your contact for high-quality sheet metal processing. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we respond to the needs of our customers on site and see ourselves as an extension of production. Appropriate machines can be demonstrated if required, along with competent advice and professional instruction. We advise you individually - according to your wishes and look forward to your inquiry. Plate shears 1500/1.2mm - Working length 1500mm - Stable and robust construction for steel plates up to 1.25mm - Large cast work table - Open design suitable for continuous cuts - Back stop with scale - Declaration of conformity - CE mark Dimensions: Length: 2000mm Width: 750mm Height: 1150mm Weight: approx. 300 kg Clearance: 8cm Hsdpfxotctl Te Aacsfn Shipping within Germany 180€ All prices are subject to 19% VAT. Pick up yourself Cash on delivery Other dimensions 1550mm and 3000mm on request Contact:

Condition: new, Year of construction: 2025, Heavy duty manual guillotine shear for trade and industry. With the manual guillotine shear GLT you can make the perfect cut with every job. the extending table makes it easier to guide large-sized metal sheets on the table Support table with graduation robust and compact steel construction high quality, durable steel knife extremely stable and heavy construction made of cast iron ground and hardened guillotine shears Back gauge system with Scala CE mark Declaration of conformity stable and robust construction for steel plates up to 1.2mm Working length 2050mm open design suitable for endless cuts large cast work table Lower storage compartment for storing sheet metal pieces in the price Hjdpfx Aajcl D Hlocefn Dimensions: Length: 2500mm Width: 750mm Height: 1150mm Weight: approx. 500 kg Passage: 8cm Price: 4650 euros marking template free! Delivery date: every week Contact what's app We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery)

Condition: new, Year of construction: 2025, Up to 150km free delivery. ABKANTBANK-Technik Halver, YOUR competent partner in the matter of ABKANTBÄNKE We are your contact for high-quality sheet metal processing. As a distribution partner of the Polish manufacturer PROD-MASZ for many years, we respond to the needs of our customers on site and see ourselves as an extended arm of the production. Appropriate machines can be demonstrated if required, in addition to competent advice and professional instruction. We advise you individually - according to your wishes and look forward to your inquiry. guillotine shear 3000/1,0mm - Working length 3000mm - Stable and robust construction for steel plates up to 1.2mm - Large cast iron work table - Open design suitable for endless cuts - Backgauge with scale - Declaration of conformity - CE mark Dimensions: Length: 3500mm width: 750mm height: 1150mm Weight: approx.700kg Hjdpfxjtctl Ne Aacofn passage: 8cm Shipping within Germany 390€ All prices are subject to 19% VAT. Self collection Cash payment on delivery Other dimension 1000mm to 3000mm on demand Contact us:

Condition: good (used), Year of construction: 2000, sheet thickness steel (max.): 3 mm, cutting length (max.): 1,020 mm, Mechanical guillotine shears Fab. SCHRÖDER Typ. MHSU 1020 x 3mm Year 2000 Technical data Make: SCHRÖDER Type: MHSU 1000 x 3mm Year of manufacture: 2000 Sheet width: 1000 mm Sheet thickness: 3 mm Space requirement: LWH approx. 1.40 x 1.50 x 1.30 m Weight: approx. 720 kg Equipment - Manual backgauge - Operating instructions - Cutting edge lighting - Continuous hold-down device with hard rubber strip - Machine feet Hfedpfxsulrx Ts Aacen All specifications without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 1999, machine/vehicle number: 121841, Offer 25317 Technical data: - Max. working width: 2020 mm - Max. material thickness: 3 mm - Strokes per minute: up to 32 1/min - Cutting angle: 2.0° - Motorized backgauge: 5 - 500 mm - Front material chute - Rear area safety guard - Extendable front material support - Electric foot pedal - Single stroke or continuous stroke selectable - Drive: 400 V / 4 kW - Required space: approx. W 2450 x H 1180 x D 2300 mm - Weight: approx. 1300 kg Hedpfx Aaoxc Ei Hjcofn

Condition: used, Year of construction: 2011, machine/vehicle number: 300195, Lg.no. 24215 Technical data: - max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - stroke rate up to 34 1/min - backgauge with positioning control Pos100 - table height approx. 850 mm - front angle fence - 2 front support arms - Back gauge with light barrier - E- foot switch Hfjdpjtpnldjfx Aacon - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg