Used Rod Machine for sale (66,357)

Condition: used, functionality: fully functional, overall weight: 310 kg, Weight: 310 kg Dimensions: 900x700x1550(h) mm Motor power: 3 kW Pedpex I Rdiofx Acvspp Solid square: 20x20 mm Solid round: 20 mm diameter Handrail: 60x12 mm

Year of construction: 2010, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rotational speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 8,500 mm Y-axis travel: 480 mm Z-axis travel: 325 mm Max. spindle speed: 15,000 rpm Spindle power: 5.5 kW Tool holder: BT 30 MACHINE DETAILS Ppsdpfsypbmijx Acvsp Tool changer: 8 positions EQUIPMENT Tools

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 6,450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, rotational speed (max.): 6,000 rpm, tool diameter: 80 mm, TECHNICAL DETAILS X-axis travel: 6,450 mm Y-axis travel: 400 mm Z-axis travel: 380 mm Machining length: 6,500 mm Number of tools: 8 pcs. Tool holder: BT30 Tool change time: 1.2 s Maximum tool diameter: 80 mm Spindle speed: 6,000 rpm Feed rate X: 34 m/min Feed rate Y+Z: 18 m/min MACHINE DETAILS Podpfx Acsyg D A Iovepp Total power requirement: 8.5 kW Dimensions & Weight Dimensions: 9,800 x 3,000 x 2,400/3,300 mm Weight: 5,400 kg

Year of construction: 2022, condition: excellent (used), functionality: fully functional, machine/vehicle number: 122000029, We are offering this very well-maintained elumatec SBZ 122/75 profile machining centre, year of manufacture 2022. Type: 122/75 Pedpfx Asywku Tocvspp Serial number: 122000029 Year of manufacture: 2022 Voltage: 400 V Frequency: 50/60 Hz Power: 17.5 kW Current consumption: 25 A Maximum motor current: 20 A Short-circuit withstand strength (Ik/SCCR): 5 kA Compressed air pressure: 7 bar Weight: 3,800 kg Maximum profile diameter: 180 mm Spindle speed: 6,000 rpm Maximum speed: 20,000 rpm If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1500050123, rotational speed (max.): 18,000 rpm, working length: 12,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. speed: 18,000 rpm Machining length: 12 m Pneumatic collets: 20 pcs MACHINE DETAILS Electrical data Voltage: 400 V Phases: 3 ~ Frequency: 50 Hz Pjdpoxnz Ivefx Acvopp Current draw: 76 A Operating pressure: approx. 8 bar EQUIPMENT Automatic tool changer Angle head

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1500050285, travel distance X-axis: 7,800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 14, Submitting a bid obligates the buyer to collect the item on time on 23.12.2025! TECHNICAL DETAILS Travel X-axis: 7,800 mm Travel Y-axis: 1,000 mm Travel Z-axis: 630 mm Rapid traverse X-axis: 70 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min Max. workpiece length: 7,300 mm Max. spindle speed: 24,000 rpm Spindle motor power: 15,000 W Number of spindles: 1 Number of tool magazine slots: 14 Tool diameter: 100 mm Ppjdpfexx Uf Nox Acvjp MACHINE DETAILS Input voltage: 400 V Type of input current: Alternating current (AC) EQUIPMENT Documentation/manual included Magazine can be equipped with nine standard tools, five special tools, and one saw blade Ten clamping devices Two separate work areas for pendulum operation 15" color display Floppy disk drive DOS operating system

Condition: used, Disc sander with spindle sander KURT EHEMANN type V K8 Combined drum sanding machine - double sanding machine, cylindrical rod sanding machine Machine no. No. 6812420 Year of construction 1968 Sanding disc diameter 800 mm Table support on sanding disc 900 x 300 mm Sanding disc speed 940 rpm Table height of sanding disc 900 mm Spindle sanding unit with sanding sleeve Ø 50 mm Table support for spindle sanding unit Ø 500 mm Table height spindle sanding unit 1000 mm Pjdpfxerk U Edj Acvopp Spindle sanding unit speed 1410 / 2420 rpm pole-changing Motor power sanding disc 3 kW Motor power spindle grinding unit 1.1 / 1.6 kW Mains connection 380 Volt, 50 Hz - inclinable sanding table, 30° downwards/ 15° upwards - the entire table can be swiveled away from the plate for changing sandpaper - Spindle sanding unit with clockwise/anticlockwise rotation (1410 rpm for clockwise rotation, 2420 rpm for anticlockwise rotation) - Spindle sanding unit with oscillating stroke movement 10 mm - Height-adjustable grinding spindle in the table - Spindle sanding unit with inclinable rotary table, inclinable by approx. 30° - Rotary table with removable segment inserts Ø 54 / 84 / 308 mm - Pipe connection for extraction system, rectangular 100 x 170 mm Space requirement L x W x H 1500 x 1100 x 1400 mm Weight 550 kg Very good condition

Year of construction: 1985, condition: used, machine/vehicle number: 112-176, Technical data: Ppsdsc I Snzspfx Acvsp -Bending mot. Automatic or manual mode -Bending performance square steel ST 37 up to approx. 25 mm -Bending performance flat iron ST 37 to approximately 30 x 8 mm -Bending length betw. the rotating units adjustable up to approx. 1000 mm -Faceplate with various recording profile perforations -Tailstock / recovery storage -Delay start bending / bending length twisting preselection - right - left rotation -Space requirement approx. B 1750 x H 1100 X 500 mm -Drive 400 V / 0,75 kW -Weight approx. 150 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 750x1000x1350 mm Weight 420 kg Podpfx Aovz Hdtscvopp Total power requirement 2,7 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 920x760x1000 mm Weight 250 kg Podovz Hdmopfx Acvspp Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1050x850x1300 mm Weight 420 kg Ppsdpfx Acovz Hfqjvsp Total power requirement 4,5 kw

Condition: new, Year of construction: 2025, The 5-axis machine is designed for the industrial machining of aluminium and steel profiles with large volume and weight. The machine is equipped with a 450 mm saw blade. Ppedsxt D Szopfx Acvsp Window construction profiles, special fabrications, façade profiles, and steel profiles are suitable for processing on this machining centre. The frame is made of a welded construction that is mechanically machined. The material thickness of the frame exceeds 14 millimetres to ensure a flat surface and to avoid deformation during transport and/or movement of the machine. The frame is fitted with 12 adjustable steel feet that adapt to any type of flooring, each equipped with rubber pads to prevent the transmission of vibrations to the floor. A movable carriage made from welded steel tubing is mounted on the frame and connected via multiple supports to guarantee maximum stability and to prevent deflection of the support even during demanding operations on steel or other high-strength materials. Machining area X: 7,100 mm Machining area Y: 460 mm (4 axes) Machining area Z: 300 mm Machining axis A: 180° Machining axis C: 360° Maximum speed X: 90 m/min Maximum speed Y: 60 m/min Maximum speed Z: 30 m/min Maximum speed A: 3,600°/min Maximum speed C: 1,800°/min

Condition: new, Year of construction: 2025, The SZ 200 is a 4-axis milling machine designed for a wide range of production processes and precisely tailored to the needs of various industries. It is a unique, reliable, and cost-effective product that optimizes working conditions for operators. The SZ 200 comes equipped with four automatic clamping devices and a high-performance electrospindle. With a power output of 5.6 kW and a speed of 20,000 rpm, it easily handles all production requirements. The machine features comprehensive equipment: enclosure, tool changer, standard clamping system, and tools. The ergonomic control panel, like the entire machine, is extremely compact. Even complex profiles and machining operations can be carried out within a footprint of just 10 m². Podpjxt D R Djfx Acvepp The tool changer offers 12 tool positions. X-axis travel: 3,010 mm Y-axis travel: 245 mm – 320 mm Z-axis travel: 250 mm A-axis rotation: 180° X-axis max. speed: 55 m/min Y-axis max. speed: 40 m/min Z-axis max. speed: 30 m/min A-axis max. speed: 3,000°/min

Year of construction: 2017, condition: excellent (used), functionality: fully functional, FOM Industrie ARGO 70 3-axis CNC machining center for drilling and milling operations on steel or aluminum profiles. TECHNICAL DETAILS X-axis top only: 6.780 mm X axis top + heads: 6.630 mm Y and Z axis for machining on top and rear side: 545 mm x 295 mm Y and Z axis for machining on 3 profile sides: 440 mm x 295 mm Pneumatic rotation: 0°, 90°, 180°. Ppjdpfx Acolu E Naovjp Rotational speed: max. 17.000 rpm profile width: max. 545 mm bar length: max. 6.780 mm Number of milling spindles for aluminum: 1 tool change places: 12 POSITIONING AND CLAMPING Clamping devices with controlled and independent positioning: 4 Number of pneumatic clamps: 4 Max. Number of clamps: 8 MACHINE DETAILS main motor: 6,5 kW total power 8,3 kW speed axis X: 100 m/min EQUIPMENT - Multiple workpiece - Tool clamping system - pendulum operation - Minimum quantity lubrication - Chip discharge conveyor - Rigid tapping - Air cooling - Tool holder - Tool rest with 12 places at the head - Operator terminal with PC - 23" screen - 3D visualization for FomCam

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 9,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 24,000 rpm, machine/vehicle number: 031809, TECHNICAL DETAILS X-axis travel: 9,500 mm Y-axis travel: 1,000 mm Z-axis travel: 630 mm Feed rate X-axis: 70 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Swivel angle A-axis: ±110°, freely programmable in 0.1° increments Swivel angle C-axis: ±182°, freely programmable in 0.1° increments Spindle speed: max. 24,000 rpm Spindle power: 15 kW S1 Maximum milling cutter diameter: 100 mm Maximum disc milling cutter diameter: 100 mm Maximum saw blade diameter: 400 mm Tool holder: HSK-63F MACHINE DETAILS Compressed air connection: 7 bar Electrical connection: 400 V, 3~, 50 Hz, 80 A Air consumption: approx. 200 l/min with misting EQUIPMENT Machining operations: milling, drilling, tapping, thread milling, notching, and sawing with stationary profile bar Podoycul Sspfx Acvopp 6-sided machining: front optional, underside possible Profile protection: machining with stationary profile bar Robust, low-wear direct drives on all axes Axes: 5-axis CNC control for complex 3D machining Display: 15-inch colour monitor Interfaces: USB ports, network connection 2-layer machining for pendulum operation Associated tooling (HSK tool holders) Two circular saws for aluminium Note: Documentation for disassembly of the machine is included.

Year of construction: 2023, operating hours: 50 h, condition: excellent (used), functionality: fully functional, number of tool turrets: 1, Note: This offer concerns the assignment of a leasing agreement. Pulsed cleaning laser Narran ROD 500W, equipped with an IPG Photonics source. The machine is in very good condition, with approximately 50 operating hours, used mainly for demonstrations. Technical data: - Average power: 500 W - Peak power: 2.5 MW - Wavelength: 1064–1070 nm - Frequency: 2–50 kHz - Fiber optic cable length: 10 m - Head weight: 1.5 kg - Dimensions: 1.4 x 0.6 x 1.1 m - Device weight: 195 kg - Rated power: 3.5 kW - Power supply: 220/230 V (16A) The following accessories are also included: - TBH LN 265 filter – high-performance extraction system with a compact and mobile design; - Extraction fan with hose and nozzles; - 6 pairs of special protective goggles for laser operation; - Interchangeable lenses for the working head; - 3M mask/face shield; - Protective partitions/separators to enclose the workspace; - Manuals in Polish and English, technical documentation (DTR) in Polish, and site-specific instructions; Podpfxsx Ezw Us Acvjpp - Domain, website, and e-mail address. The listed price is the sum of the net principal leasing instalments, excluding additional costs, and is for informational purposes only. Offer does not include any transfer fee.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,280 h, functionality: fully functional, travel distance X-axis: 4,200 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 24,000 rpm, swivel angle A-axis (max.): 180 °, TECHNICAL DETAILS Pjdpfx Acow Svmisvjpp Max. machining length without end face processing: 4,200 mm Max. machining length with end face processing: 4,080 mm Travel distances X-axis travel: 4,200 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Traverse speeds X-axis traverse speed: 65 m/min Y-axis traverse speed: 60 m/min Z-axis traverse speed: 60 m/min Swivel range A-axis: 0° - 180° Positioning accuracy X-axis positioning accuracy: ± 0.1 mm Y-axis positioning accuracy: ± 0.1 mm Z-axis positioning accuracy: ± 0.1 mm A-axis positioning accuracy: ± 0.1° Max. spindle speed: 24,000 rpm Spindle rated power: 7 kW S1 Tool holder: HSK-F63 Max. cutter diameter: 80 mm Max. saw blade diameter: 200 mm MACHINE DETAILS Air consumption: approx. 180 l/min Machine weight: 4,200 kg Operating hours Spindle hours: 1,280 h Machine hours: 13,066 h

Year of construction: 2007, operating hours: 4,100 h, condition: good (used), functionality: fully functional, The machine is not more needed for our production and therefore its for sale. The machine is in our ownership from 2007 and it is regularly maintained. Everything works normal. Dismantling and load on truck are in price. Ppjdpswwtw Defx Acvjp Some more informations: 5-axis profile machining centre Designed for flexible and efficient machining of aluminium Autonomous clamp positioning Max. working lenght: 9.300 mm 12 pneumatic clamps Tool magazine with 20 tools capacity and saw blade 500mm Spindle working hours 4100h Additional tehnical specifications available on request

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1400040164, workpiece length (max.): 7,900 mm, spindle speed (max.): 21,000 rpm, The spindle motor was completely factory overhauled a few years ago and has only operated for approximately 100 hours since. TECHNICAL DETAILS Workpiece length: 7,900 mm Speed: 21,000 rpm Ppedpfx Aoxy Hciecvep MACHINE DETAILS Pneumatics Pressure: 8 bar Electrical Data Connection type: 3/PEN Voltage: 400 V Frequency: 50 Hz Current: 24 A

Condition: new, Applications: Production of concrete blocks for wall, foundation, pillars, roofs, chimneys. Production of concrete pieces for water drainage Advantages: optimal distance between the mould and the over-mould ensures a comfortable position for the operator - Handling the steering wheel requires minimal effort thanks to a gear force reducer; - Simple operation and maintenance professional vibrator with low power consumption Automated stopping of the vibration once demolding occurs Wide variety of molds - there is the possibility of installing moulds for high concrete elements (maximum 370mm)* Technical specifications: Maximum mold dimensions: 800x500mm Maximum height of end product: 370mm Cycle duration: 60 seconds Supply power: 0.28kW Supply voltage: 220V Overall dimensions: 1.35x 1.55 x 1.7 m Machine weight (including a mold): 400 kg Ppsdpfxoiwut Te Acvop Vibrator rotation speed: 3000rpm Concrete consumption: 2 m3/hour Recommended concrete mixer: MX300L

Condition: new, Year of construction: 2025, Gravel and aggregate production equipment is used to crush, screen, and process stones, rocks, and other materials for the construction industry. This equipment is essential in producing various types of aggregates, including crushed stone, gravel, sand, and recycled concrete, which are used in the construction of roads, buildings, bridges, and other infrastructure projects. Here are some common types of equipment used in gravel and aggregate production: 1. Jaw Crusher: - Jaw crushers are primary crushers used to break down large rocks into smaller, more manageable pieces. They are essential for the initial stage of aggregate production. 2. Impact Crusher: - Impact crushers are used to crush rocks and stones with the help of impact force. They are suitable for shaping and producing fine aggregates. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They produce well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They are suitable for processing materials with high abrasiveness. 5. Screens: - Vibrating screens are used to separate different sizes of aggregates. They classify the material based on particle size and ensure that the final products meet specified gradation requirements. 6. Scalping Screens: - Scalping screens are used to remove oversized materials before they reach the primary crusher. This helps to optimize the crushing process and prevent damage to the equipment. Pjdpfeq Nxz Djx Acvepp 7. Washing Equipment: - Washing equipment, such as sand screws or log washers, is used to remove impurities and fine particles from aggregates. This is particularly important for producing high-quality concrete sand. 8. Conveyors: - Conveyors are used to transport materials between different stages of the crushing and screening process. They play a crucial role in enhancing efficiency in material handling. 9. Stackers and Reclaimers: - Stackers are used to create stockpiles of processed aggregates, while reclaimers are used to retrieve the material from the stockpile. Both are essential for efficient material storage and handling. 10. Crushing Plants: - Complete crushing plants include various types of crushers, screens, and conveyors integrated into a single system. These plants are designed to handle large volumes of material efficiently.

Condition: new, Year of construction: 2026, functionality: fully functional, SMART Professional dry ice blaster Pjdpfx Aevff H Iecvopp like new 1 year warranty Free delivery Including accessories car deteiling, car cleaning, machine cleaning, motor cleaning

Condition: excellent (used), Year of construction: 2016, ELOPAK Shikoku S-PS60EC Carton Filling Machine Year: 2016 The ELOPAK Shikoku S-PS60EC is a reliable, industrial-grade carton filling machine designed for the forming, filling, and sealing of gable-top cartons for liquid food products. Manufactured by Elopak in cooperation with Shikoku Kakoki, this machine reflects the proven engineering and hygiene standards for which both companies are globally recognized. Key Capabilities: -Gable-top carton forming, filling, and sealing in a single integrated system -Suitable for liquid products such as milk, juices, water, and other chilled beverages -Designed for medium-to-high output production, typically up to ~6,000 cartons per hour (depending on configuration and carton size) -Compatible with common carton volumes, generally ranging from 250 ml to 1,000 ml -Blank-fed operation with precise carton forming prior to filling -Hygienic & Robust Design The S-PS60EC is built for food-grade production environments, featuring: -Stainless steel construction in product contact areas -Hygienic design suitable for dairy and beverage applications -Automated filling accuracy and consistent sealing quality Ppsdpfx Aceyxgxksvop -Designed for clean-in-place (CIP) integration, depending on configuration Cartoning Machine is located at former dairy in the South of Ireland. The machine is still on location and viewing can be arranged. The site is reachable by Shannon International Airport & Cork International Airport. Contact for more information.

Condition: excellent (used), Year of construction: 2021, operating hours: 537 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 650 mm, travel distance Z-axis: 200 mm, total height: 2,215 mm, total length: 2,820 mm, total width: 1,700 mm, wire diameter (max.): 0.2 mm, workpiece height (max.): 510 mm, workpiece width (max.): 510 mm, workpiece length (max.): 510 mm, type of input current: three-phase, overall weight: 3,220 kg, empty load weight: 3,320 kg, feed length X-axis: 650 mm, feed length Z-axis: 200 mm, feed rate X-axis: 240 m/min, feed rate Z-axis: 240 m/min, table load: 500 kg, input voltage: 400 V, working range: 510 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, tank capacity: 930 l, cutting speed: 240 mm/min, travel speed (max.): 240 mm/min, input frequency: 50 Hz, input current: 11 A, Equipment: documentation/manual, 2021 Agie Charmilles CUT AM 500 Wire EDM Machine Podpfx Ajxtfwxocvjpp Discover premium Swiss precision with this 2021 Agie Charmilles CUT AM 500 CNC Wire EDM Machine This high-performance wire EDM machine has only 537 erosion hours and comes from a medical device manufacturing environment, ensuring meticulous maintenance and minimal wear. Ideal for high-precision applications in medical, aerospace, automotive, and mold-making industries. Machine Overview Make/Model: Agie Charmilles CUT AM 500 Machine Type: CNC Wire EDM Machine Year: 2021 Control System: GF Control Erosion Hours: 537 hrs Condition: Very Good – ready for immediate operation Technical Specifications Work Area Max. part dimensions: 510 x 510 x 510 mm Max. part weight (base + parts): 500 kg Dielectric level (min/max): 250–305 mm Performance Max. machining speed: 240 mm²/min Surface roughness (Ra):

Condition: good (used), Beer / Brewery Production Equipment 9 qty insulated tanks, approx 1000 lts capacity each 2 qty large tanks, approx 1500 lts capacity each All associated pumps, chiller pump units, wash station. 2 qty tanks with lids, approx 1000 lts each 2 qty large tanks with lids, approx 1500 lts each Ppjdpfxsyg R Azs Acvsp All associated pumps, water filteration system 2 qty timber clad tanks, approx 1000 lts and 1500 ltd capacity each 2 qty insulated tanks, approx 1000 lts capacity each All associated equipment, heat exchanger, pumps,