Insulating glass production machine

Falk Wasseraufbereiter

Condition: good (used), Year of construction: 1981, functionality: fully functional, SINGLE-DIE TUBULAR RIVET HEADER NATIONAL M5 Rebuilt on 2024. New electrical system. Operational, working. Available for any test. Number of die: 1 Number of pieces per min.: 300 Length Rivet: 20 mm. Depth of Pierce (max.): 5 mm. Bsdpotxni Nofx Al Dewn Cutoff diameter: 5 mm. Floor space (width): 1.300 mm. Floor space (length): 2.690 mm. Power of main motor: 7.5 KW Net weight: 3.100 kg. Gross weight: 3.700 kg.

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12 Bwjdpfx Aljdt Rgvo Djn

Condition: used, Weinig Profimat 22 with 4 shafts. Movable left shaft with measurement sensor, for automatic movement based on the width of the pieces inserted into the process. Bwsdpfx Aleryb D Se Djn Dimensions and weight: Cm. 330*145*H160. Weight 1400 kg. (on pallet)

Condition: used, Year of construction: 2000, functionality: fully functional, Trimming line consisting of: centering table H42 (factory-overhauled EWD 2000), chipper canter FZ 3 (factory-overhauled EWD 2000), converted to servo cylinder; infeed BNK with square timber centering, BNK 200/6, year of manufacture 2000; board separator ASV, year of manufacture 2000; hydraulic unit; central lubrication. Without electrical control equipment. Dismantled, chipper canter and BNK stored in the hall. Bwsdpfxjx Tpzds Al Dsn

Condition: good (used), Year of construction: 2003, Automatic hydraulic gluing press Kallesoe Type LV 7821 press is used for gluing wooden elements, e.g. tabletops with maximum dimensions of 7800 mm x 2100 mm, Bwodpfx Aorqzgksl Djn the factor which accelerates gluing is warm water supplied to the press shelf and being in continuous circulation (it can be supplied from CO or heated by heaters mounted on the press) Heating power of the press 72kW Maximum capacity of the press up to 2000 m2 / 7.5h Glue applicator with feeder for Kallesoe press Type KL40 - used to automatically apply glue to each lamella and transfer directly to the press LV7821

Condition: repair required (used), Year of construction: 1993, machine/vehicle number: 624/9, pressing force: 10 t, working height: 805 mm, total length: 1,900 mm, Finger joint press Cycle press for finger joint connections Bwedpfx Alot Sc T Ij Djn Finger jointing press Pressing force 10 t Wood width 80 - 300 mm Wood thickness 18 - 100 mm OPTIONAL with hydraulic unit

Condition: new, functionality: fully functional, Year of construction: 2026, LOADING, UNLOADING, LOADING DOCK, ACCESS, MOBILE RAMP 15T RAMP, 2M WIDTH TM-GROUP ONE OF THE BEST CHOICE ON THE MARKET ✅ Specification: - Manufacturer: TM-GROUP - Maximum load capacity: 15 tons - Internal ramp width: 2150 cm - Ramp barriers on both sides - Ramp rollers for easy movement - Central handle for moving the ramp with a forklift - Angle and flap height adjustment - Lubricated moving parts - Equipped with a winch - Custom ramp dimensions available for an additional fee - Height adjustment with motor (optional) - ! ATTENTION: ADJUST THE WIDTH OF THE NOZZLE TO THE MINIMUM UTILITY NICHE ! ✅ Raid Lattice: - Galvanized grid with anti-slip grooves. Reliable and safe base. The forklift and pedestrian traffic are guaranteed the best possible grip and solid support. ✅ Handle for a forklift (can be installed on both sides): - Convenient and quick attachment for a forklift allows the ramp to be transported in all directions. The specially designed handle allows you to maneuver the ramp even in confined spaces. ✅ Additional adjustable or fixed safety supports - Work safety is essential, the ramp is equipped with a support system known from truck semi-trailers. Solid legs guarantee a stable base under the transported load. ✅ Chain to connect to a truck, wagon or fixed storage ramp A solid steel chain is another advantage of our ramp, additionally the protection excludes the possibility of the ramp moving during loading work. ✅ Solid side rails: - Safety barrier with the possibility of unscrewing and installing a frame/roof (the roof is optional) Bwedpjmt D Sbjfx Al Djn ✅ Electric control of ramp height: - The smooth electro-hydraulic drive uses a high-end 230V pump. ✅ Double sided hand pump: - Hydraulic pump for height adjustment when it is not possible to connect to the electro-hydraulic power supply - two-sided lifting. ⭐️ We offer the following variants: ⭐️ - Driveway widths in 1900 - 2000 cm, 2150 cm and 2500 cm PREMIUM. - Mobile ramps in tonnage of 10 tons, 15 tons and 20 tons and 25 tons PREMIUM. - Thickness of overrun grids 3 - 5 cm. - Colors: red, blue and black. - Mobile ramp with tarpaulin.

Condition: refurbished (used), pressing force: 10 t, working height: 805 mm, total length: 1,700 mm, year of last overhaul: 2026, Hydraulic finger jointing cycle press (Keilzinkpresse), cycle press for finger joint connections with a pressing force of 10 t. Wood width 80 – 300 mm, wood thickness 18 – 100 mm. OPTIONS: With 300 l hydraulic unit and 5.5 kW motor, manufacturer GOD; with electrical installation. Bedpfx Alst Sc Sws Djwn

Condition: good (used), Year of construction: 1962, large band saw with 1250 mm roller diameter with center cutting device 45 kw motor roller width 120 mm with electr. saw blade tensioning Bodpfsfnh T Iex Al Dswn the upper wheel has been removed for transport very good condition because little run was overhauled in 1997

Condition: used, Year of construction: 2005, functionality: fully functional, length stop: 3,200 mm, tool diameter: 400 mm, spindle diameter: 50 mm, spindle stroke: 640 mm, spindle speed (max.): 3,000 rpm, milling spindle length: 320 mm, saw blade diameter: 400 mm, height adjustment type: electric, type of input current: AC, working height: 130 mm, working width: 200 mm, SCM Windor 60/100 – Angle Processing Center Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System The system in question is a window and door production line of the type Windor 60/100 from the manufacturer SCM Group, built in 2005. It is a CNC-controlled angle processing center designed for the industrial machining of frame and sash components. The system is configured for series production and enables precise, repeatable machining in integrated process steps. 2. Main Components of the System 2.1 SCM Windor 60/100 Angle Processing Center The SCM Windor 60/100 features a modular design and is configured as an angle processing unit. Machining takes place on a tenoning side and a profiling side positioned at right angles to each other. The system combines several machining steps – such as milling, drilling, grooving, rebating, and tenoning – in a fully integrated, CNC-controlled process. Key Features: * CNC multi-sided machining * Multiple milling and processing spindles * Automated tool handling and changeover * High dimensional accuracy and repeatability 2.2 Fleximat Drilling Center The Fleximat drilling center is integrated into the system and is used for the precise execution of boreholes for joints and fittings. Machining is CNC-controlled with both vertical and horizontal drilling units. 2.3 Profiler Center The profiler center is designed for contour-forming milling operations and consists of two processing sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour processing Left side: * 24-position tool changer * Automatic tool changing to minimize setup times * Suitable for complex profile milling 2.4 Löwer Surface Sanding Machine A surface sanding machine from Löwer is integrated into the production line. The machine is used exclusively for surface sanding, serving to improve the surface quality of the processed workpieces. 3. Control, Operation, and Safety Bedex Nqqxjpfx Al Dswn The system is equipped with a CNC control unit that manages all machining operations, tool changes, as well as feed and spindle movements. Operation is semi- or fully-automated by trained personnel. The safety features are state-of-the-art as of the time of construction (2005) and include, in particular: * Mechanical guards and enclosures * Emergency stop devices * Safety locks on moving machine parts 4. Optional Expansion: SCM Topset XL Planer (10-spindle) For expansion of the existing machinery, provision has been made for a SCM Topset XL planer with 10 spindles. This machine will be operated as a standalone processing station at a separate location within the production hall and is not directly integrated into the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transportation are to be organized by the buyer. Available from 07.01.2026