Used Rack Milling Machine for sale (67,622)

Condition: excellent (used), Year of construction: 1964, functionality: fully functional, Manufacturer: KNAPP-DONAU Model: UZFM Year of manufacture: 1964 Condition: used Price & Location Location: Rostock, Germany Milling length: 1800 mm Milling width: 260 mm Module - max.: 10 mm Table dimensions incl. coolant channel: 460 x 2100 mm Clamping surface: 250 x 1850 mm Maximum milling cutter width: 100 mm Infinitely variable feed of the milling carriage: 0 - 500 mm/min Rapid traverse: 3000 mm/min Swiveling milling head: +/- 30° Spindle speed range, 9 steps: 29 - 178 rpm Milling head tiltable on both sides for helical gearing: 30° Ljdeytbrajpfx Amnjrl Machine weight: approx. 3.5 t Space requirement: approx. 4 x 1.85 x 1.85 m Equipment/Accessories - 13 vices - Change gears - Clamping devices - Documentation

Condition: excellent (used), functionality: fully functional, Manufacturer: KNAPP-DONAU Model: UZFM Year of manufacture: 1974 Condition: used Price & Location Lrjdpoy Rgmrsfx Amnel Location: Rostock, Germany Milling length: 1800 mm Milling width: 260 mm Module – max.: 10 mm Table dimensions incl. coolant channel: 460 x 2100 mm Table clamping surface: 250 x 1850 mm Maximum milling cutter width: 100 mm Feed rate of milling slide, stepless: 0 - 500 mm/min Rapid traverse: 3000 mm/min Milling head - swivelling: + / - 30° Spindle speed range, 9 steps: 29 - 178 rpm Milling head swivels both sides for helical gearing: 30° Machine weight: approx. 35 t Required floor space: approx. 4 x 1.85 x 1.85 m Equipment/Accessories - 11 vices - Change gears - Clamping devices - Documentation

Condition: excellent (used), functionality: fully functional, Description WMW ZFWVG 250 x 800 Thread Milling Machine Thread Milling Specification: Workpiece diameter over: - Bed: 500 mm - Saddle: 250 mm Milling length: 800 mm Max. module: 7 Centre height over bed: 260 mm Workpiece spindle bore: 102 mm Workpiece turning speeds: 0.0034 – 2.65 rpm Feed rolls: 0.027 – 5.66 mm/rev Longitudinal feeds, infinitely variable: 0.3 – 198 mm/min Main drive: 4.0 kW Ljdpfsy Rgl Usx Amnorl Electrical voltage/frequency: 380 / 50 V/Hz Total power requirement: 9.5 kW Dimensions: 3000x2500x1600 mm Total weight: 3300 kg

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 mm table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° Lodjylpzyepfx Amnorl weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - Documentation

Condition: excellent (used), functionality: fully functional, WMW Germany GFL-400 x 1000 mm Thread Milling Machine Manufacturer: WMW (Germany) Model: GFL-400 Centre Height: 205 mm Maximum Workpiece Length: 1000 mm Lodpfoytirnex Amnorl Maximum Workpiece Diameter over Cross-Slide: 200 mm Maximum Swing Diameter over Bed: 400 mm Cutter Speeds: 55 rpm to 250 rpm Maximum Cutter Diameter: 100 mm Spindle Bore: 80 mm - Suitable for thread milling, worm milling, and spline milling. - Also capable of gear hobbing and spline hobbing. - Supplied complete with change gears, index plates, arbors, and additional accessories. - The machine is in excellent working condition.

Condition: used, Year of construction: 1990, hobbing length 2100 mm milling width 300 mm max. module 16/18 min. module total power requirement 10 kW weight of the machine ca. 5 t Lredpjt Hwwqsfx Amnel dimensions of the machine ca. m

Condition: used, Year of construction: 1980, hobbing length 1750 mm milling width 260 mm max. module 10 min. module 12 total power requirement 8 kW weight of the machine ca. 4500 kg dimensions of the machine ca. m D O N A U - K N A P P (Germany) Universal Automatic Rack Milling Machine Model UZFM – V 300 H Lrsdot Hxagopfx Amnjl Year approx. 1980 Serial No. 80-234x Max. length of rack 1,750 mm Milling travel / milling width cross max. 260 mm Module, steel / cast iron 10 / 12 Table clamping size 275 x 1,850 mm Mounting height below cutter, depending on cutter Ø 136 – 410 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm Cutter width max. floating / with support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling right / left 30 / 45 ° 9 spindle speeds 22 – 179 rpm Milling slide swivelling right / left 30 ° Feeds, infinitely variable (milling slide) 0 – 600 mm/min Quick return 2,000 mm/min Milling spindle drive approx. 4 kW Total electrical load 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special Features: * Automatic milling cycle control via cam bloc mounted on milling slide and table slide with possibility of jump switching (= automatic by-pass of an area which should not be milled) and pendulum milling operation (= synchronized milling on the first half of table, and workpiece change on the second half. * hydraulic workpiece clamping device: 1.800 x 260 mm each, clamping width 140 mm, clamping height inside the device 60 mm, with own hydraulic aggregate, hand switch, * Manual fine adjustment of table (0.001 mm) for exact positioning in a pre-milled rackgear. * Various change gears (approx. 10 pieces). * 2 cutter mandrels. * Various other accessories. * Central lubrication. * Built-in hydraulic unit. * Simple Coolant device. Separate switch cabinet, various rack cutter up to 160 dia. This machine is especially suitable for milling racks, and also for manufacturing broaching tools (relief milling is possible by swivelling the cutter head). Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, machine/vehicle number: ZFM300H 76 2301, RACK MILLING MACHINE Ledpfx Amsykpl Nensrl

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min Lsdpfxjy Ayrrj Amnorl milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° total power requirement 4 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Milling length 1750 mm Milling width 260 mm Module - max. 10 Table dimensions incl. water channel 460 x 2100 mm Table clamping surface: 250 x 1850 mm Milling cutter width - max. 100 mm Feed of the milling carriage, infinitely variable 0 - 500 mm/min. Rapid traverse 3000 mm/min Milling head - tiltable + / - 30 ° Speed range of the milling spindle, in 9 steps 29 - 178 rpm Milling head swivels on both sides for helical gearing 30 ° Machine weight approx. 4 t Space requirement approx. 4 x 1.85 x 1.85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - documentation

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Ljdpfsyahv Ssx Amnorl Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: excellent (used), Year of construction: 2011, XYZ SLV Turret Milling Machine Manufactured 2011 Spindle Motor 5 hp Spindle Speeds 70 – 3600rpm Spindle Taper ISO40 Table Size 1473 x 305mm T Slot Size 16mm T Slots 3 off X Axis Travel 1000mm Y Axis Travel 410mm Knee Vertical Travel 413mm Ram Travel 450mm Lrsdsy R Skcopfx Amnjl Supplied with: Power Feed Longitudinal (X) Power Feed Cross (Y) Powerd Knee 3 Axis Digital Readout Misc Spindle Tooling Machine Manuals Air Draw Bar We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79192 Machine Serial Number: 11501 £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Lrsdpfey Ni Ivsx Amnsl Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Lodpfx Amjxxb Rrensrl Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Lrsdjx D Tbmjpfx Amnsl Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 610555, travel distance X-axis: 610 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 6,000 rpm, controller manufacturer: Fanuc, No minimum price – guaranteed sale to the highest bidder! Ledpfx Amsy Rxu Usnorl TECHNICAL DETAILS Travel X-axis: 610 mm Travel Y-axis: 460 mm Travel Z-axis: 510 mm Spindle speed: 60 - 6,000 rpm Tool holder: BT40 Table length: 950 mm Table width: 560 mm MACHINE DETAILS Control: CNC Control system brand: Fanuc Power: 7.5 kW Number of axes: 3 pcs. Dimensions & Weight Dimensions (L x W x H): 2100 x 2600 x 2600 mm Weight: 3,800 kg Shipping units: 1 pc.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 16090455, travel distance X-axis: 850 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 210 mm, table width: 500 mm, table length: 1,570 mm, TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 435 mm Z-axis travel: 210 mm Table length: 1,570 mm Table width: 500 mm Lodpoy Rxq Ajfx Amnorl Main spindle power: 3.8 kW Number of axes: 3 pcs. MACHINE DETAILS Control: CNC Control manufacturer: Heidenhain Power: 16.0 kW Dimensions & Weight Dimensions (L x W x H): 2,800 x 1,800 x 2,300 mm Transport weight: 3,500 kg Transport packages: 3 pcs. EQUIPMENT Tools included External cooling Documentation

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, TECHNICAL DETAILS Lrjdpfx Asy Rxqvemnsl X-axis travel: 1,000 mm Y-axis travel: 750 mm Z-axis travel: 750 mm Tool holder: ISO40 Max. spindle speed: 12,000 rpm MACHINE DETAILS Control: CNC Power: 22.0 kW Number of axes: 3 Weight: 10,500 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 28,246 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,600 mm, table load: 20,000 kg, overall weight: 28,000 kg, No reserve price – guaranteed sale to the highest bidder! Lrjdpfxjy R Dpkj Amnol TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 2,000 mm Z-axis travel: 1,600 mm B-axis: 360° C-axis: 360° Spindle taper: SK 50 Rotary table (L x W): 2,500 x 2,000 mm Table load capacity: 20,000 kg Tool magazine: 100 pcs. MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 7,300 x 7,700 x 4,350 mm Machine weight: 28,000 kg Operating hours Operating hours: 75,377 h Spindle hours: 28,246 h EQUIPMENT H- / V- head

Condition: ready for operation (used), Year of construction: 2002, operating hours: 41,859 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,500 mm Travel Z-axis: 1,500 mm Lredpfxey R Dnaj Amnel Number of stations: 90 Head and rotary table: 1,600 x 1,450 mm MACHINE DETAILS Control type: CNC Control: Heidenhain Operating hours Control on-time: 106,253 h Machine on-time: 93,170 h Program runtime: 41,859 h

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 75385, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, quill stroke: 80 mm, spindle speed (max.): 2,500 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect within the period from 23.06.2026 to 26.06.2026! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Spindle speed: 50 - 2,500 rpm Feed rate X/Y/Z-axis: 5 - 1,000 mm/min Rapid traverse X/Z-axis: 4 m/min Rapid traverse Y-axis: 2 m/min Tool holder: ISO 40 Lrjdpfx Asy D Swismnjl Quill stroke of horizontal and vertical working spindle: 80 mm Table dimensions: 730 x 410 mm Number of T-slots: 8 MACHINE DETAILS Control: HEIDENHAIN TNC 135 Operating voltage: 380 V Frequency: 50 Hz Connection rating: 10 kW Rated current: 50 A Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,100 x 2,200 mm Machine weight: 2,000 kg EQUIPMENT Workshop drawer cabinet with SK 40 holders Clamping devices External reference: 13

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, machine/vehicle number: 1616, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 450 m/min, spindle speed (max.): 2,500 rpm, No reserve price - guaranteed sale to the highest bidder! Placing a bid commits you to collect the item within the scheduled period between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Travel X-axis: approx. 300 mm Travel Y-axis: approx. 300 mm Travel Z-axis: approx. 300 mm Spindle speed range: 40 to 2,500 rpm Table dimensions: 600 x 210 mm Number of feeds: 16 Feed rates: 28 to 450 mm/min Number of slots: 4 Tool holder: SK 40 MACHINE DETAILS Ljdey D Shnopfx Amnorl Dimensions & weight Dimensions (L x W x H): 2,000 x 1,200 x 1,700 mm Machine weight: 1,000 kg EQUIPMENT Mounted vice (jaw width: 110 mm) Set of tool holders Milling cutters Collets Three-axis digital readout (manufacturer: FAGOR) External reference: 10

Condition: ready for operation (used), Year of construction: 2004, operating hours: 23,291 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 750 mm, table length: 3,200 mm, table width: 1,400 mm, TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,400 mm Lredsy R Dn Hspfx Amnsl Z-axis travel: 750 mm Table size: 3,200 x 1,400 mm MACHINE DETAILS Control type: CNC Control system: Heidenhain Operating hours Spindle run time: 23,291 h Program run time: 27,807 h Control on time: 83,301 h Machine on time: 73,907 h

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 15,000 rpm, controller model: Heidenhain TNC430 PA, Submitting a bid obligates you to collect the machine on time, during calendar week 25! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 2,360 mm Travel range Z-axis: 1,000 mm Ljdpfx Amsy Sxkronsrl Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Rapid traverse rate X-axis: 20 m/min Rapid traverse rate Y-axis: 20 m/min Rapid traverse rate Z-axis: 20 m/min Spindle speed (max.): 15,000 rpm Torque: 57 Nm Spindle power: 18 kW Work table (L x W x H): 4,500 x 2,000 x 400 mm T-slots, lengthwise: 18H12 Distance between T-slots: 250 mm Tool interface: HSK 63 F Tool clamping: hydraulic MACHINE DETAILS Control system: Heidenhain TNC430 PA Type of input current: Three-phase Power requirement: 20 kW Frequency: 50 Hz Voltage: 400 V Fuse rating: 63 A Dimensions & Weight Machine footprint without control cabinet (L x W x H): 6,000 x 3,500 x 4,050 mm Total weight: 15,000 kg EQUIPMENT Spindle speed infinitely adjustable Tool changer TT140 measuring probe Note: Machine without enclosure. The zero-point clamping plates and other accessories shown in the pictures are not included in the scope of delivery.

Condition: used, functionality: fully functional, power: 3.68 kW (5.00 HP), input voltage: 380 V, type of input current: three-phase, Microcut Vertical Turret Milling Machine – 5HP Microcut vertical turret milling machine manufactured by Buffalo Machinery Co. Ltd, Taiwan. Heavy duty industrial machine fitted with power feeds, coolant system and machine vice. Model: 5VK type with 5HP motor and 380V 3 phase supply. Suitable for precision engineering, fabrication, maintenance workshops, toolrooms and general machining work. Features include: Vertical turret milling head Large T-slot table Power feed controls 5HP motor 380V 3 phase Machine vice included Coolant tray and lubrication system Variable speed head Heavy cast iron industrial construction Machine is in good used workshop condition with normal cosmetic wear from industrial use. It is complete and operational. Ideal for engineering shops, maintenance departments and production work. Lredpfxsy R Ebnj Amnel Loading available on site. Transport can be arranged. Viewing welcome. Open to sensible offers.

Condition: used, Gebr. Thiel Duplex 159 Universal Milling Machine with DRO High quality German-built Gebr. Thiel Duplex 159 universal milling machine in good used industrial condition. Precision toolroom machine fitted with Newall digital readout (DRO), swivel vice and universal milling head. Well regarded for accuracy, rigidity and versatility, these machines are ideal for toolrooms, precision engineering, prototyping, maintenance workshops and general machining applications. Machine Details: Manufacturer: Gebr. Thiel GmbH Model: Duplex 159 Universal milling machine 380V 3 phase Newall DRO fitted Swivel machine vice included Universal adjustable milling head Horizontal and vertical milling capability Coolant tray and lubrication system Features: Precision table feeds Heavy cast iron construction Fine feed controls Toolroom quality machine Ideal for precision engineering work Condition: Good used workshop condition with normal cosmetic wear for age. Machine is complete and operational. A highly sought after universal milling machine with excellent build quality. Loading available on site. Lrjdpfey R D E Esx Amnol Transport can be arranged. Viewing welcome. Open to sensible offers.