Revolving Indexing Machine

RIELLO AZ.21/104/10-V

Condition: excellent (used), Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, turning height: 3,000 mm, workpiece weight (max.): 30,000 kg, turning diameter: 3,500 mm, power: 100 kW (135.96 HP), TECHNICAL CHARACTERISTICS 1. Max. machining diameter mm 3.500 2. Min. machining diameter mm 0 3. Max. height of the part mm 3.000 Nwedpfx Aotpnlwoaaof 4. Max. load on the table to 30 5. Table diameter mm 3.000 6. Table speed range rpm 2 ÷ 130 7. Main AC motor - turning kW 100 8. The maximum torque of the faceplate in turning mode Nm 105.000 9. Ram vertical stroke (Z axe) mm 1.750 10. Turning ram cross section mm x mm 300x300 11. Horizontal stroke –X axe mm 2.000 12. Feed range (X and Z axe) mm/min 1 ÷ 6000 13. Rapid traverse (X and Z axe) mm/min 8.000 14. Feed motor torque (X and Z axe) Nm 22 18. Vertical stroke of the cross rail mm 2.700 CNC Equipment 1. Equipment type Fanuc Overall Dimensions 1. Floor space m 8.5 x 6 2. Max. height of the machine m 8.2 3. Max. height over floor level m 7.4 3. Machine weight to 89 Tool Magazine 1. Number of tool magazines - 1 2. Number of tools/magazine - 16 3. Feed motor torque with encoder Nm 12 4. Tool change time sec. 25 5. Maximum weight of the tool holder - for turning daN 100 6. Maximum length of the tool holder - for turning mm 600

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Nodpfx Aaou Rptyeaowf Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: ready for operation (used), Year of construction: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25000l mixing tanks, a casting robot and two release agent robots is available. Capacity: 225t/24h, tool carriers: 42, mixing positions for additive mixing: 10, mixhead type: MQ, max. working pressure: 180bar, pressure tank: 330bar. Foam types: Rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible. Nedpfx Asttbd Noaaewf

Condition: ready for operation (used), Printing units: 2+1 flexo printing units, max. output with dextrin: 900 envelopes/min, paper weight: 70g/m²-120g/m². Formats: Book format min./max: 83x120mm/185x330mm, Diagonal format min./max: 83x120mm/185x265mm. On-site inspection is possible. Nwjdpfx Aetq Ha Teaajf

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Nodpfx Aaoxzq Nceajwf Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: used, Year of construction: 2003, turning diameter 190 mm turning length 620 mm Nodpfxexiy Aus Aaaowf control Fanuc Series 18i-TB total power requirement 15 kW weight of the machine ca. 13,5 t dimensions of the machine ca. 5350X3350x2395 m

Condition: ready for operation (used), Format: 0.5-1l, max. output: 5000 cartons/h, with cap applicator and EURO-LINE cartoning machine, an on-site inspection is possible. Nwjderviq Hopfx Aaaof

Condition: excellent (used), the plant is consisting of: Nwsdpfxslxzl Es Aaajf - 2 chain separators - 2 55 cbm³ silos with discharge screws - 2 discharge screws - 4 mixing and homogenising chambers, - 5 conveyor belts - 2 double-shaft extruders connected in parallel - 1 double shaft mixers - container for liquid extracts, etc.

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. speed: 12,000 rpm Strokes: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower tool turret Nwedpfx Aswg Taksaajf Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Chip conveyor Bar loader Operational documentation For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 184 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] Nwedpfjuhhp Sjx Aaaof GUIDE BUSH HOLDER 1 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] SECONDARY OPERATION - Number of positions : 6 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kVA] MACHINE HOURS - Number of working hours : 54.035 [h] EQUIPMENT - CNC : Fanuc PNC DECO - Rotating tool motor on : S2, S3, S5,S6 - Rotating guide bush - Parts catcher - Coolant tank * with high-pressure pump - Bar loader : IEMCA GENIUS 118 / 32LL - Cooling unit : MARKSA CSW 200 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Number of turning tool holders : 3