Used Racks For Metal Sheets for sale (42,028)

Condition: new, For sale is our Trumpf remaining grid pallet. Dimensions: Suitable for sheet metal with dimensions of 2500 mm x 1250 mm. The pallet is new and unused, but it was stored outdoors and therefore has some surface rust, which will disappear after several uses. Cjdjzd Sfwopfx Afqerd Also suitable for transporting wood – firewood. The pallet is lifted with a forklift and emptied via a tilting mechanism. Collection only.

Condition: excellent (used), functionality: fully functional, control type: manual, actuation type: mechanical, sheet thickness (max.): 10 mm, Equipment: cone bending device, foot remote control, OMEG three-roll mechanical plate bending machine Useful bending length: 2050 mm Lower roll diameter: 200 mm Upper roll diameter: 250 mm Bendable thickness: 8-10 mm Cone bending device Cjdoy H Ikkopfx Afqjrd Extended rolls for profile bending Used machine in perfect working condition.

Condition: new, functionality: limited functionality, Year of construction: 2025, control type: manual, Equipment: CE marking, documentation/manual, OMEC 4-Roller Mechanical Symmetric Plate Rolling Machine with Double Pinch 1530×2.5 mm Brand new, CE certified. Cjdpfx Afey E Schjqord Made in Italy. Double pinch. Top and bottom rollers powered with equal torque. Side rollers motorized for upward/downward movement. Front-opening top roller. Special bearings for side rollers. External lever to control roller inclination. Sheet clamping with bearing-actuated device. Two-pedal foot control. Electrical panel compliant with CE standards. Millimeter indicator for sheet clamping position. Standard equipment included with the plate rolling machine: - Frontal conical device on top roller. - No. 2 digital displays for the side roller positions. - No. 1 digital display for the motorized sheet clamping. - Grinding/Turning of rollers after hardening treatment. - Roller hardening. - Side sheet loading table with sheet centering stops, marked in mm. Working length: 1530 mm. Top and bottom roller diameter: 90 mm. Side roller diameter: 95 mm. Plate thickness: 1.5 – 2 – 2.5 mm. (1.5 x D / 3 x D / 5 x D). Roller hardness: 55/60 HRC, 2 mm case depth. Installed power: 1.8 kW. Dimensions: 2290 x 750 x h 1150 mm. Weight: 690 kg.

Condition: new, OMEC 3-roll mechanical symmetrical calendering machine with double feed New “CE” marked Made in Italy USEFUL WORKING WIDTH: 2050 mm UPPER ROLL DIAMETER: 150 mm LOWER ROLL DIAMETER: 150 mm SIDE ROLL DIAMETER: 150 mm MAX. CALENDERING THICKNESS 1.5 x D: 4 mm MAX. CALENDERING THICKNESS 3 x D: 4.5 mm MAX. CALENDERING THICKNESS 5 x D: 5 mm Crodpfx Afjgyk S Aoqsd MACHINE DIMENSIONS: 920 x 3400 x 1100 mm TOTAL INSTALLED POWER: 6.5 Kw WEIGHT: 1700 KG The FX3-3 series distinguishes the asymmetrical 3-roll mechanical calendering machines with a simple FULL FEED system. The side roll (bending roll) is mounted as standard with steel supports and bearings, and bronze pads on the outside guarantee maximum reliability and minimal friction over time. The rotation of the rolls is applied to the UPPER roll and the LOWER roll via a gearbox and a self-braking motor, and the translations and sheet clamping also use motors and gearboxes from leading brands. Equipped with hardened rolls, motorized translation and clamping, preparation for mounting profiled rolls and a conical device positioned directly in the upper roll, these machines represent the best compromise between absolute quality and ease of use for the operator for the most varied cylindrical and conical calendering operations. As standard, the upper roll opens laterally to extract the calendered sleeve. MACHINE CONFIGURATION: UPPER and LOWER ROLLS, MOTORIZED, rotating with equal power. SIDE ROLL, MOTORIZED, for up/down movement. MOTORIZED SHEET CLAMPING. DIGITAL DISPLAY for the position of the side roll. DIGITAL DISPLAY for the sheet clamping height. ROLL HARDENING: HRC 55/60, DEPTH 2 mm. Side roll supports in steel + sealed bearings + external bronze pads. PREPARATION FOR INCLINING the side roll(s) to create cones (conical device excluded). EXTERNAL CONTROL LEVER for roll inclination (right) for FX3.2/FX3.3 - (right + left) for FX4.1/FX4.2. PREPARATION FOR PROFILED ROLLS. FOOT PEDAL: 2 PEDALS + control for side roll up/down movement and sheet clamping + emergency stop button. ELECTRONIC CONTROL of feed stages. ELECTRICAL PANEL COMPLIANT WITH CE STANDARDS. INCLUDED WITH THE MACHINE: - Front conical device in the upper roll. - Digital display for the position of the side roll. - Digital display for the sheet clamping height.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, For sale: CNC bending machine CIDAN FX32 PLUS with a pivoting beam, featuring both fixed and segmented tooling. The Plus model, with its adjustable bending center, maintains a consistent distance to the radius rail throughout the entire bending process. The result is a perfect radius, without causing material stress, regardless of thickness, ensuring a flawless finish and virtually unmatched accuracy in angles and measurements. Technical specifications: Credpfx Aezc Hvijfqsd Year of manufacture: 2024 Control: CNC with nuLink Mechanical bending compensation adjustment (Crowning system) Working length: 3200 mm Max. bending thickness: 2 mm Bending beam tooling: 7/10 and 20 mm Automatic back gauge – flexible 1550 mm CNC control with nuLink graphical user interface (intuitive, easy programming) Quick-change segmented tooling High accuracy and repeatability Application: These machines are designed for bending, forming, and profiling sheet metal. They are ideally suited for the production of ventilation systems, facades, sheet metal structures, metal doors, chimneys, and roofing systems. The robust frame and precise CNC control enable extremely high production accuracy. If you have any further questions, we will be happy to answer them.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, For sale: CNC bending machine CIDAN FS26 PLUS. With an adjustable bending center, the bending beam maintains a constant distance to the radius rail throughout the entire bending process. The result is an ideal radius, without causing material stress, regardless of the thickness, perfect finish, and almost unparalleled accuracy of angles and measurements. Technical specifications: Year of manufacture: 2024 Cjdpfx Aezc Hpijfqsrd Total weight: 2930 kg Control: CNC with nuLink Mechanical deflection compensation adjustment (Crowning system) Working length: 2600 mm Max. bending thickness: 2.5 mm Bending beam tooling: 7/10 and 25 mm Automatic back gauge – flexible 1550 mm CNC control with nuLink graphical user interface (intuitive, easy programming) High accuracy and repeatability Application: This machine is designed for bending, forming, and profiling sheet metal. It is perfectly suited for the production of ventilation systems, facades, sheet metal structures, metal doors, chimneys, and roofing systems. The robust frame and precise CNC control enable extremely high production accuracy. If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 1987, control type: manual, degree of automation: manual, working width: 2,000 mm, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, back gauge: 1,000 mm, power: 7.5 kW (10.20 HP), overall weight: 2,600 kg, total length: 22,000 mm, total width: 27,000 mm, total height: 16,000 mm, cutting length (max.): 2,000 mm, throat depth: 300 mm, Hydraulic shear, cutting length 2050 mm, cutting capacity 4 mm, throat 300 mm, motor 7,5 KW, working high 800 mm, back gauge 1000 mm motorised, dimension 2700x2200x1600 mm, weight ca. 2600 kgs Codpfx Aetwzctsfqsrd

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 3,100 mm, total width: 1,400 mm, total height: 1,800 mm, overall weight: 2,300 kg, nominal power: 23.5 kW (31.95 HP), 12 months warranty, 1800 operating hours Cjdoyw Hhvjpfx Afqord

Condition: used, Year of construction: 2025, operating hours: 630 h, functionality: fully functional, - 12-month warranty Equipment: - Powergrip - 2 x 400 mm magnetic track - Interior lighting - Belt drive control for the R-unit Crsdpfoy Ar Dgjx Afqjd

Condition: new, functionality: fully functional, Year of construction: 2025, Laser source - MAX Photonics Table size - 4000x2000mm Control system - FSCUT 6000 Software - Cypnest+Cypcut Laser head - Boci BLT442 Nitrogen proportional valve - SMC Power stabilizer - 120kVA Water cooler - Hanli Load capacity up to 3200kg Laser power - 12000 W X/Y positioning accuracy - ±0.05 mm/m X/Y repeat positioning accuracy - ±0.03 mm/m Maximum travel speed - 120 m/min Maximum acceleration - 1.5 G CNC control - FSCUT 6000 EtherCAT-BUS Power supply - 380V 50Hz three-phase Credpfx Afswnqbzsqsd

Condition: used, functionality: fully functional, Mabi 4QS + Stanze 4H Quadro seam-forming machine and tacking device Mabi 3000E segment shear Mabi casing bending machine Mabi hole punch Mabi 40 cap trimming machine + Mabi 4K cap punch Codpfxoyz Ad Uj Afqord

Condition: excellent (used), Year of construction: 2002, RAS Multibend Center 79.22 Automatic cnc FOLDER / Panel bender Year 2002 Specifications • Working Length: 2160 mm/ 7.09’ ft. • Maximum Sheet Metal Thickness: Steel – (400N/mm2) 2.0 mm • Maximum Sheet Metal Thickness: Stainless Steel – 1.5 mm • Maximum Sheet Metal Thickness: Aluminum – 3.0 mm • Maximum Development Sheet Width: 1500 mm/ 4.92’ ft. Codjrxt Axepfx Afqjrd • Maximum Four-Sided Fold Height Max: 203 mm • Bending Blade Reach: 180 ° Degrees • Machine Width: 5500 mm approx./ 18.04’ ft. approx. • Machine Length: 7000 mm approx. / 22.97’ ft. approx. • Machine Height: 2500 mm/ 8.20’ ft. Power: 18 kW Frequency: 50hZ Pressure: 6 Bar Weight: 21,000 kg/ 46,297 lbs. approx.

Condition: excellent (used), Year of construction: 2002, RAS Multibend-Center RAS 79.26 Year 2002 Used RAS Multibend Centre CNC Folder Max working 2560mm Max sheet thickness (mild steel) 2.0 (2.5mm) Max sheet thickness (stainless steel) 1.5mm Max sheet thickness (aluminium) 3mm Codpfx Ajrxt Hqofqsrd Finished part length min. (w/o corner tools) 200/250mm Finished part length (w. small corners) 380/430mm Finished part length min (w. large corners) 430mm / 480mm Finished part width min. (inside) 150 (140mm) Finished four sided part height max 203mm Side free space corner tools (small/large) 30/ 50mm Folding beam travel range 180 Deg Working height 1000mm Machine width 7700mm Machine length 5800mm Machine max height 2400mm Weight approx 17000kg Drive power 25kw

Condition: excellent (used), Year of construction: 2001, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, working width: 1,850 mm, working range: 1,850 mm, 1 Used Salvagnini cnc automatic panel bender for sale cnc folder P4.1812 Servo-controlled panel bender Crsdpfowb E Uvox Afqjd LS Upper bending blade LI Lower Bending blade MLA.ZR Manual length Adjustment of Blankholder CLA Long Tab Bending Unit HP12015 R81 Chiller Max. length at entrance: 1850mm. Max. width at entrance: 1500mm. Minimum length at entrance: 285mm. Minimum width at entrance: 190mm. Maximum diagonal: 2150mm. Maximum width at exit: 1500mm. Maximum reference dimension: 2000mm. Minimum sheet thickness: S min: 0,50mm. Maximum sheet thickness, Mild Steel (max. 410 N/mm2): Max: 2,00mm Maximum sheet thickness, Stainless steel (max. 600 N/mm2): Max. = 1.25mm Processing of pre-painted material Smax= 3,00mm. Maximum tool length for CLA option: 1000mm.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Make: RAS Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Cjdpfx Asw T Sc Asfqsrd Manufacturer: RAS Model: 73.30 Year: 2003 Useful bending length: 3200 mm Sheet thickness: 3.0 mm Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Speeds: Bending beam, max.: 90 degrees/sec Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Equipment • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge • Motorized lower beam adjustment and bending beam adjustment • Support table A good selection of tooling, segmented and full length

Condition: excellent (used), Used Gecam - Euro Fintec 128 steel tube linisher / sander / polishing machine for sale Fintec 128 Tube finishing machine for sale Csdpfx Aswbh Dyofqord Can be viewed under power with your steel tubes

Condition: like new (used), Year of construction: 2022, operating hours: 0 h, functionality: fully functional, machine/vehicle number: levellers, number of straightening rollers: 21, working width: 1,300 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, conveyor belt width: 2,000 mm, input voltage: 400 V, plate width: 1,300 mm, straightening roller diameter: 80 mm, Plate straightening MC 1300 x 0,8to6 mm / Rollers steel quality 42NiCrM04 hardened 62 HRC mirror-ground surface / Safety barrier around the machine / Infeed roller table 2 mtr. motorized forward&reverse / Unloading roller table 2 mtr. motorized forward&reverse / Gap detection and ranging into the straightening rollers / fast change system rollers pack, with load unload table height adjustable motorized / Synchro speed between straightening rollers and infeed/outfeed table rollers / Plate sheet position detection and monitoring all along the straightening process / Heat exchanger fluids cooler, greasing system automatic -Programmable CNC straightening process for automatic sequence / Network connect remote monitoring and data exchange machine from-to cad station / Database of materials quality for hardness control -Techical data: working height 1000 mm / Total electric power installed 25Kw ---Capacity Csdpey Uvutefx Afqord Plate width max 1300 mm / plate thickness 0,8 to 6 mm carbon steel / Plate thickness 0,8 to 4 mm stainless steel

Condition: excellent (used), Year of construction: 2000, Programmable and automatic machine for the production of sheet metal panels by forming multiple bends on all four sides. Credpfsw A Nnpjx Afqjd

Condition: used, max. working length: 3200 mm; max. material thickness: 3 mm for steel sheet Cedpfx Aoyrbqasfqjrd

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a vertical metal sheet storage system, the STOREMASTER Rolly Tower, complete with an ABUS crane and a vacuum sheet lifting device. The equipment is used, in very good condition, and has seen limited use. It is currently disconnected, but the entire system is complete. The storage system is designed for efficient storage of sheet metal, as well as for fast and safe loading and unloading of sheets. The shelves are manually retractable, and the sheets are moved using a crane with a vacuum lifting device. Technical specifications: Manufacturer: Storemaster Model: Rolly Tower Year of manufacture: 2012 System dimensions (L × W × H): 4200 × 1700 × 4360 mm Sheet dimensions: up to 3000 × 1500 mm Maximum shelf load: 3000 kg Number of shelves: 13 retractable shelves Additional storage space at the top: 4 Crane: ABUS Crane lifting capacity: 500 kg Vacuum lifting device lifting capacity: 250 kg Jib length: 6000 mm Codpfxjzfglnj Afqerd Total system weight: approximately 10,000 kg Total electrical power: 4 kW Advantages: Compact vertical storage High storage density Fast sheet access Safe loading and unloading of sheets ABUS crane included Vacuum sheet lifting device included Robust industrial design Lightly used, very good condition Application: Ideal for metalworking, sheet metal production, ventilation, facades, roofing, metal structures, and other companies that require efficient sheet storage and fast material handling. If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 1985, control type: manual, working width: 4,080 mm, sheet thickness steel (max.): 10 mm, back gauge: 1,000 mm, power: 22 kW (29.91 HP), overall weight: 16,500 kg, total length: 5,300 mm, total width: 2,500 mm, total height: 2,300 mm, Cutting length 4080 mm, cutting capacity 10 mm, motor 22 KW, working high 800 mm, back gauge 1000 mm motorised, cutting line, footpedal, 4 frontarms, maschine can be lower down by 200 mm, dimension 5300x2500x2300 mm, ca. 16000 kgs Codpfxehl Im Ns Afqjrd

Condition: excellent (used), Nibbling machine Manufacturer: Fein Model: QB 141a Cutting capacity: 4.5 mm 380 Volt Crodjy Au E Hopfx Afqod 1100 Watt Transport dimensions: Width: 530 mm Depth: 350 mm Height with pallet: 1070 mm Weight: 83 kg with pallet

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, Equipment: CE marking, Used Cnc folder Ras XL Center 63.30 cnc folder up down folder 3metre For Sale Capacity: 126-inch / 3.2 metre (3,200 mm) folding length and can handle up to 16-gauge (1.5 mm) mild steel. Bi-directional Folding: The machine folds parts both up and down, which minimizes material handling by the operator and increases production speed. Precision Technology: It is equipped with five servo-regulated motors for high-speed operation and includes programmable gripper positions for creating tapered or conical parts. Software Control: Features a multi-touch PC control system where operators can draw profiles directly on the monitor; the software then automatically calculates the folding sequence and provides 2D/3D simulations. Design Flexibility: Offers 300 degrees of free space in front of the folding beams, allowing for the creation of complex part designs that standard machines might struggle to accommodate. Cedoym T Iaspfx Afqsrd

Condition: used, Wide belt sander used Make:TimeSaver Series WRB Machine-No. 2480-19 Dry processing deburring/rounding machine machine with contact rollers and a rotating brush unit Max. Working width 1350 mm Sanding belt dimensions WxL 1350x1900 mm Outer brush diameter 530x350 mm Table opening 0.8-100 mm Min. part size 50x50 mm Brush speed 6-17 m/sec. Sanding belt speed 11 m/sec Feed speed 0.2-8 mm Power consumption W 1 unit - 11.0 kW RB unit 1.5 kW Brushes 4x1.5 kW Connection: 400 V 50 Hz Compressed air required 6 bar Total consumption 25 ltr/min. incl. ceramic brush set R plus 350x530 mm and zirconium brush set Cjdpfx Aoudb R Isfqjrd grain 180 Machine has been completely overhauled New transport mat installed Area of application: Sanding belt rolling unit W: Pre-deburring with sanding belt or Scotch- Bride belt Removal of raised burrs Apply a sanding finish or brush finish, Repair a sanding finish or brush finish RB unit: Deburring and rounding of flat and profiled and profiled parts Weight: 6200 kg

Condition: used, functionality: fully functional, Year of construction: 2007, Schechtl MAE400 CNC pivoting bending machine Year of manufacture: 2007 Max. material thickness: 2mm steel Max. material length: 4040mm Automatic back gauge: 1000mm Crjdpfx Afszffvljqed The machine is in good technical condition.