Used Double Rack Press for sale (25,126)

Condition: like new (used), JBT Double D 2 rack rotary oven. Takes 2 x 18 x 30 racks. Very clean and tidy. For bakery use. Hsdpfx Afohyuchonefc

Condition: excellent (used), Protein cooker direct from Meat-free factory. 6 rack capacity. Lovely condition. Hfjdpfx Afet R Skmonsc

Condition: used, Year of construction: 2000, ram adjustment: 120 mm, table width: 840 mm, table length: 1,500 mm, pressing force: 260 t, compressed air connection: 9.807 bar, stroke length: 250 mm, air pressure: 9.807 bar, We are offering this used Chin Fong OCP-260N eccentric press with double column, year of construction 2000. Hedpfxeykbcmj Afnjfc Model: OCP-260N Factory number: A00373 Year of construction: 2000-11 Capacity: 260 tons Stroke frequency: 20–40 strokes/min Stroke: 250 mm Maximum die height: 500 mm Upper bolster clearance: 7 mm Slide adjustment (range): 120 mm Upper platen surface (L × W): 1130 × 700 mm Lower platen surface (L × W): 1500 × 840 mm Main motor power: 22 kW Poles: 4 Machine weight: 31.8 tons Compressed air pressure: 9.807 bar Oil temperature max.: +100 °C Oil temperature min.: -10 °C Oil volume: 180 liters If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509, Year of manufacture 1971 Pressure capacity 50 tons Column width 550 mm Hfedpfxjv Srfwe Afnoc Column side clearance 150 mm Table surface 480 x 380 mm Table opening Ø 70 mm Ram surface 490 x 280 mm Clamping pin bore Ø 40 mm Max. ram stroke 150 mm Max. installation height 390 mm Table height above floor 890 mm Rapid forward speed approx. 130 mm/sec. Working speed approx. 20 mm/sec. Return speed approx. 130 mm/sec. Motor power: 4 kW Power supply: 380 volts, 50 Hz - Continuous press force adjustment - Rapid stroke and working stroke - Pressure- or stroke-dependent stroke limitation - Adjustable pressure hold time, press time extension 0.5-6 seconds - Mechanically adjustable fixed stop via handwheel on the ram - SICK light barrier, type LVU - Stroke counter - Double column guide on the ram Space requirement: L x W x H: 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? Hodpjfxyh Refx Afnofc :1200 ? :1200 ?

Condition: used, Double-column Eccentric Punching Press BLEMA Gotha Type PEZ 160-50 MHSY-ES Eccentric press with ALBA roller feeder Machine No. 88151005 Year of manufacture 1988 / 92 Press force 160 tons Column width 970 mm Column width (lateral) 560 mm Table size 900 x 900 mm Ram surface 900 x 700 mm Tool installation height 560 mm, max. 700 mm Stroke adjustment 8-160 mm Ram adjustment travel 125 mm Stroke rate 25 to 70 strokes/minute Strip width in roller feeder max. 400 mm Motor power approx. 15 kW Power supply 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Semi-automatic stroke adjustment - Ram weight balancing cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch-brake combination - Centralized oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Switch cabinets for the press and feeder, jointly mounted on a platform next to the machine Platform dimensions: 3400 x 2250 mm, height without feet 2950 mm Press width without feeder 2100 mm Press depth with drive motor 2300 mm Overall press height 4150 mm Net weight of punching press approx. 18 tons For transport, the drive motor is disassembled and the machine is laid on its side. Included: NC Roller Feeder-Straightener ALBA Type GGVHY400 Equipment No. 1405 and 1406, Order No. 910708 (year 1992) - Feeder control ALBA PSS 300 - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Strip thickness at 400 mm width max. 3 mm - Strip thickness at 300 mm width max. 4 mm - Strip cross-section max. 1200 mm² - Roller drive of the feeder hydraulically controlled - Height-adjustable feeder unit at the press for material entry height adaptation Hjdedzqlvjpfx Afnsfc - Hydraulic unit positioned next to the line - Straightening unit with hydraulic opening and closing Weight of the complete system approx. 24 tons Transport space required: one megatrailer with 3-meter internal height and 13.6-meter loading length Good condition

Condition: used, Hydraulic Double-Column Press Double-Column Hydraulic Press SCHÖN Type TES 25 Machine No. 1847 Year of manufacture: 1977 – Retrofit in 2019 Fully overhauled by Schön in Hattingen in 2019 – Excellent condition Press force: 25 tons Column gap: 500 mm Side clearance between columns: 120 mm Table size: 440 x 320 mm Table opening: Ø 50 mm Ram surface: Ø 140 mm Clamping pin: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 330 mm Table height above floor: 910 mm Motor output: 4 kW Electrical connection: 400 V, 50 Hz - Complete hydraulic system replaced during 2019 overhaul - Entire electrical control system (contactor-based) renewed in 2019 to new machine standard - Stroke release via two-hand control, electric foot switch, or light curtain - Operating modes: setup, single stroke two-hand, single stroke via foot switch, control via light curtain - SICK light curtain, Type C 4000 with single- and dual-cycle, and safety function - Rapid approach and working stroke - Pressure- or stroke-dependent stroke limitation - Mechanically adjustable fixed stop - Manual press force regulation via knurled knob - Press dwell time extension: 0.5–3 sec. (pressure holding time) - Stroke counter - UVV safety inspection in accordance with BGR 500 (for manual loading) performed in 08/2019 - Full documentation available (user manual, hydraulic diagram, circuit diagram) Hfsdpfx Ajyg Rfpjfnec Required floor space (L x W x H): 1100 mm x 1050 mm x 2100 mm Weight: 900 kg Very good condition

Condition: good (used), Year of construction: 2000, Offer 25521 Double-sided long goods – cantilever racking without contents Technical specifications: - 2 pieces of double-sided cantilever racking, each consisting of - 5 uprights with boltless system, height-adjustable storage arms - Length per rack approx. 4150 mm Hfjdpfx Ajx R Si Ejfnsc - Total length approx. 9300 mm - 130 storage arms - Upright height each approx. 6000 mm - Width of upright + support arms approx. 1700 mm - Max. arm load approx. 400 kg - Max. load per upright approx. 5000 kg - Axle distance between rack sections connected with diagonals approx. 1.0 m - Increment for arm height adjustment 125 mm - Arm dimensions L 700 x W 90 x H 70 mm - Upright dimensions W 250 x H 100 mm - Weight per upright approx. 400 kg - Weight per arm approx. 10 kg

Condition: used, Technical details: pressure: 20 t slide stroke: 6 - 60 mm throat: 176 mm ram adjustment: 55 mm no. of strokes: 155 Hub/min Hfjdpfsu Nflijx Afnjc distance table/ram: 270 mm passage width: 470 mm Table dimensions: 300 x 450 mm passage opening in table: 90 mm surface area of ram: 130 x 248 mm inclination: 28 ° mortise hole in ram: 25 x 65 mm table height over floor: 775 mm air pressure - required: 5,5 - 6 bar total power requirement: 3,5 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,3 x 1,1 x 1,95 m High performance press Central lubrication with light barrier (monitored) Linuflex stroke counter (counter) additional steel plate 315 x 400 x 50mm with center hole Ø 63mm *

Condition: used, Year of construction: 1988, functionality: fully functional, Press capacity 5,000 kN Hsdpfx Afeyg Emzenofc Table area 2,400 mm x 1,700 mm Ram area 2,400 mm x 1,400 mm Adjustable stroke 25 mm - 200 mm Ram adjustment max. 200 mm Stroke rate 20 - 100 spm Drive power 84 kW Machine weight approx. 62,500 kg with roller feeder/straightener combination + decoiler Further data and photos available on request

Condition: used, Year of construction: 1992, pressure 32 t stroke 8 - 50 mm no. of strokes 50 - 300 /min distance between columns 420 mm dayligth (stroke and adjustment up) 300 mm table surface area 420 x 500 mm ram adjustment 50 mm power requirement 11,5 kW Hodpfx Afsyfwv Esnjfc Weight 5,0 t with infinitely variable drive, manual stroke adjustment, fix table, mechanical pincer feed (ZR 18), scrap cutter as is where is, WITHOUT any additional work, free loaded to truck

Year of construction: 1994, condition: ready for operation (used), Pressing force: 3150kN, table dimensions X/Y: 2500mm/1600mm, stroke (fixed): 280mm, stroke rate: 20-80strokes/min, weight: approx. 68000kg. Including Dreher transfer and feed line. The control system is defective. Documentation available. An on-site inspection is possible. Hedpoxtff Ajfx Afnefc

Condition: ready for operation (used), Two mechanical large-format double-column eccentric punching presses Rhodes (UK) are available. Press force: 350t, table dimensions X/Y: 1750mm/920mm, ram dimensions X/Y: 1550mm/615mm, ram stroke: 101mm, ram adjustment: 100mm, stroke rate: 50 strokes/min, max. installation height: 483mm, side opening X/Y: 630mm/380mm, table height: 933mm, weight: approx. 43000kg. Documentation available. On-site inspection is possible. Hfedoyfv I Tspfx Afnoc

Condition: excellent (used), For sale: a robust, double-station bookbinding/printing press from the renowned German manufacturer Karl Tränklein K.G., Maschinenfabrik Stuttgart – Schönaich. This machine was previously operated by the public sector unit Stadt Fürth (Germany), which ensures it is complete and well-maintained. The device is equipped with two independent workstations, a heavy-duty upper beam, and pressure adjustment via lever arms. The lower housing contains the mechanical and electrical systems; power is supplied through a 16A CEE connector (400V). The machine is mounted on wheels for easy mobility. Application This press is suitable for bookbinding, printing, modeling, technical works, and any applications requiring even pressure over a larger area. Ideal for book blocks, covers, laminates, paper and cardboard elements, and other materials that require pressing or stabilization under pressure. Hfodoxzu Rqjpfx Afnec Technical condition – Complete unit – All levers and mechanisms function correctly – 400V power supply, CEE 16A plug – Mobile design on wheels – Normal signs of use visible in photos – Machine is ready for operation Manufacturer: Karl Tränklein K.G. Country of manufacture: Germany (Made in Germany)

Condition: used, Year of construction: 1985, pressure 500 t distance between columns 3100 mm stroke fix 300 mm no. of strokes 20 - 70 Hub/min dayligth (stroke and adjustment up) 1000 mm column travel -side 1400 mm Hodpfx Aevut N Asfnefc table surface area 2800 x 1600 mm ram surface 2800 x 1450 mm power requirement 90,0 kW weight of the machine ca. 100,00 t required space 5,75 x 3,2 x 7,8 m ram adjustment 100 mm height over floor 6,4 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation, stored in dismantled condition (no PLC + main motor available)

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 Hfedpfx Afohlnzkjnoc double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: excellent (used), Year of construction: 2006, Kaiser Press KSTU 500-30-75 RK Press force: 500 tons Stroke adjustment: 50-250 mm Ram adjustment: 200 mm Strokes per minute: 20-80 1/min Max. installation height: 700 mm Table area: 2,500 x 1,400 mm Ram area: 2,500 x 1,250 mm Feeder Andritz Kaiser Max. strip width: 800 mm Max. strip thickness: 5.0 mm Hfodpfsyhh Nbex Afnec Straightening machine FECKER Max. strip width: 800 mm Max. strip thickness: 6.0 mm Decoiler FECKER Strip width: 800 mm Load capacity: 8,000 kg

Condition: used, Year of construction: 2003, pressure 400 t distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm Hsdpjvzxpuefx Afnofc ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition

Year of construction: 1992, condition: ready for operation (used), Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation. Hfjdpfx Aslc N Ryefnoc

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Hfjdpfolc N R Dsx Afnec

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW Hodpoydlutefx Afnjfc

Condition: good (used), Hand spindle press, mandrel press, spindle press, hand spindle press, rotary mandrel press, rack and pinion press, workshop press -Ardent press. Rack and pinion press, heavy-duty design -Protrusion: 210 mm -Height: min. 35 mm / max. 350 mm -Dimensions: 435/230/H550 mm Hfedpfexni Hyox Afnsc -Weight: 51 kg

Condition: used, Year of construction: 2018, Cantilever rack, heavy duty rack Hedpfx Aforyx Tzenjfc -Manufacturer: Gemac, cantilever rack base field double-sided -Cantilevers: 5 per side -Compartment height: 33 cm -perm. Load: 200 kg per cantilever arm / 1000 kg total. see nameplate -Quantity: 12x shelves available -Price per piece -Dimension: 1315/1210/H2000 mm -Weight: 98 kg/piece

Condition: good (used), Year of construction: 1998, Cantilever rack, heavy-duty rack -Manufacturer: LBE, cantilever rack base field double-sided -Cantilever arms: 5 levels per side, length 500 mm -Compartment height: variably adjustable -Load capacity: 1-sided 630 kg, see photos type plate -Quantity: 1x shelf available -Dimensions: 1300/1180/H1985 mm Hodpfx Afotrzpwsnsfc -Weight: 80 kg

Condition: good (used), Cantilever racking, heavy-duty racking -without insert trays: none available -Double-sided -consisting of: -Shelf: with 3 uprights each, height 5.4 m Hfodpecn Am Isfx Afnoc -Support arms, double-sided: 500 mm long -Brack load capacity: 795 kg -Load capacity per side: max. 7000 kg -screwed -Number: 4 shelves available -Price: per piece -Empty weight: 1250 kg/piece