Used Probst Easy Clean for sale (10,444)

Condition: new, Year of construction: 2022, functionality: fully functional, Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm Dksdpfx Aqoubbryjvsn - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel

Year of construction: 2013, operating hours: 1,300 h, condition: reconditioned (used), Skid similar but not Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Falch xs31.1-30-500 30l/min. at 500bar (year 01/08) - Engine: electric 30kW - 1250l water tank - pressure gauge - pressure regulator - safety valve Dedog Tm N Aspfx Aqvjkn - Steel frame powder coated - Aluminum covers - Forklift lugs and crane eyes - Dimensions with 1250l water tank: approx. 1.100 x 1.760 x 1.770 - Empty weight: 1.085 kg - Year of construction: 2013 - Operating hours: approx. 1500 h Condition: high pressure pump 06/2022 overhauled. In very good used condition.

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: CS27069, CS Clean Systems Cleansorb CS065SC Shows slight signs of wear (see pictures) Djdswm Il Uepfx Aqvokn

Condition: used, functionality: fully functional, Wema Probst QF50 Cross-Mill Machine Cross-Mill machine for processing round timber with a swivel table for adjusting the milling angle. Dksdpfxjwc Tdno Aqvjn 2 machining stations 1 cross-milling unit 1 drilling unit

Year of construction: 2020, condition: used, No. 3233 Cross milling machine Wema Probst QBV 200 Used, year of construction 2020 The machine is in mint condition, less than 30 holes have been drilled. The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs. This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment. Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc. The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column. The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out. The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill. Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools Wood diameter: 60 - 200 mm Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range Motor capacity: 2.2 kW Number of revolutions: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm LWH Weight approx. 380 kg Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Dedpfx Aqswt Abwjvokn Sold as is Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: excellent (used), EasyRobotics ProFeeder Compact – 6 Shelf Version The EasyRobotics ProFeeder Compact is a versatile, space-saving automation solution designed for loading and tending CNC machines in small to medium batch production. This 6-shelf variant offers increased capacity, making it ideal for extended unmanned operation and enhanced productivity. ✅ 6 shelves for maximum workpiece storage – provides CNC machines with extended autonomy ✅ Compact footprint – just approx. 1165 × 400 × 600 mm, fits easily in tight workshop spaces ✅ Flexible robot integration – compatible with most collaborative robots (cobots) ✅ Secure tray locking – available with mechanical or pneumatic locking systems ✅ Integrated controller compartment – eliminates the need for a separate control pedestal ✅ Fast changeovers – shelves can be quickly swapped for new batches With up to 6 trays, each supporting between 60 and 120 kg, the ProFeeder Compact ensures stable and continuous machine operation. It is the ideal solution for manufacturers aiming to increase efficiency, minimize downtime, and advance towards smart factory automation. Dkodpew Tunujfx Aqven

Condition: used, Year of construction: 2006, Ref:10882 . 2006 SCS ‘Easy Trim’ Front Cutting Device. For the front (foredge) cutting of perfect bound and thread sewn soft cover books (without flaps device). Can be integrated in or off-line, and used either before or after the three knife trimmer (4th cut) and when not in use the unit can be simply used as a conveyor. Very quick size change of approx. 3 mins through simple keying in of book parameters. Front trim using a steel knife against a plastic cutting stick. Motorised delivery table. Single button push transforms the unit into a regular conveyor belt so no divert or extra conveyor necessary. Specification: Book spine length, Max: 540 mm, Min: 120 mm Book width trimmed, Max: 350 mm, Min: 100 mm Book thickness, Max: 60 mm, Min: 5 mm Djdpfx Aqovtcviovskn Off-cut width, Max: 45 mm, Min: 5 mm Mechanical speed, Max: 4,000 cycles/hr. Compressed air required : 100 ltr/min.@ 6 bar

Year of construction: 2004, condition: excellent (used), Cavecchi Pulitrice F Cheese cleaning machine Dksdpfxeimgquj Aqvjn Serial: 51 2004, cheese cleaning machine, side and bottom brushes, 3Ph

Condition: excellent (used), Year of construction: 2024, mast type: telescopic, lifting height: 18,000 mm, fuel type: electric, color: white, Empty weight: 750 kg Lifting capacity: 250 kg Working height: 1.800 cm CE mark: yes Technical condition: very good Visual appearance: very good Delivery terms: EXW Production country: DE Please contact Vink Machinery for more information Paus Easy 18 WH-M NEW! * 2024 * 230 Volt electric * 18-meter working height * 250 kg lifting capacity * Adjustable height platform * Ground ladder in RAL9016 white Dksdpfx Aqsycda Sjvon * Adjustable guide wheels on the head section

Condition: good (used), power: 75 kW (101.97 HP), gearing type: mechanical, fuel type: diesel, color: other, lifting height: 9,000 mm, axle configuration: 4x4, Year of construction: 2020, operating hours: 2,900 h, Equipment: all wheel drive, Technical information Chassis type: rigid Drive: Wheel Make of engine: Diesel Top speed: 35 km/h Empty weight: 7.300 kg Functional Lifting capacity: 3.300 kg Maximum reach: 700 cm CE mark: yes Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Other information Output of the auxiliary hydraulics: 80 l/min Emission level: Stage IIIB / Tier IV interim Dksdpfx Ajzbzmgjqven Delivery terms: EXW Production country: IT Additional information Please contact Martyn Joosse for more information = Additional options and accessories = - Additional hydraulics - Forks - Quick locks

Condition: good (used), Year of construction: 2015, CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used: Price ex works: €23,500 (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Year of manufacture: 2015, former DEMO MACHINE Three-axis milling machine in a flat-bed gantry design. Working travels X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame and gantry: Designed as a solid, stress-free, fully welded steel structure, powder-coated. Heavy table substructure for mounting the vacuum table VAC-CAISSON, designed as a cassette, with air passage holes in a 10 mm grid. Feed rate: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, slide shoes with upstream ball screw. Transmission: Precision ball screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeat accuracy: +/- 0.025 mm Mechanical resolution: 0.0006 mm Numerical control: Mecanumeric CN 7000 ISO-G-Code Machine operation via a 10" touch screen display Complete documentation and CE declaration of conformity in accordance with the basic safety and health requirements of Vacuum table 1,020 x 1,500 mm Support/work table designed as a closed aluminum plate, on which vacuum passage holes are arranged in a 10 mm grid. The table is divided into 2 main areas, which can be switched on manually. Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. Milling spindle HF40-ATC24 ENC Conversion Module APSG-A Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. High-frequency motor milling spindle 4KW Power: 4KW Speed range: up to 24,000 rpm. Fast tool change with pneumatic ejection, ISO30 taper. Tool holder: Clamping diameter up to 2-16 mm. Cooling with compressed air 6 bar 20 m/h Dkedpfxszbybie Aqvsn Converters and switching elements are included in this position. Safety enclosure for the machine Front with door and safety lock - Position PROTCHOC omitted - Preparation of the electrical control and switching elements as well as the output socket for a high-performance industrial vacuum cleaner. Changer CH 6 S Condition: good Available: immediately Location: Delmenhorst

Year of construction: 2007, condition: ready for operation (used), overall weight: 1,300 kg, number of axes: 3, This 3-axis EROWA Robot Easy Automation was manufactured in 2007. It features a maximum load capacity of 1500 kg and a magazine plate with 6 positions per level. The machine has a Z-axis travel of 75 mm and an M-axis capable of 360° movement. If you are looking to get high-quality automation capabilities, consider the EROWA Robot Easy Automation system we have for sale. Contact us for further details. Dodszcdwdspfx Aqvokn - Maximum Load Capacity (Magazine): 1500 kg- Magazine Plate Options & Capacity:* MTS 400: 6 positions per level, max 1500 kg per level, max 250 kg per position- Transfer Weight Capacity:* Max. 250 kg (Requires RCS 5 coupling and RCS 5 Gripperlink ER-038622 on all pallets for weights above 130 kg)* Max. 130 kg (With RCS I coupling)- Electrical Supply Voltage Options: 3 x 400 VAC ±10%, 3 x 208 VAC ±10%, or 3 x 480 VAC ±10%- Operating Frequency: 50/60 Hz- Power Rating (Output): 710 VA- Nominal Current: 1.8 A- Fuse Protection: 10 ATT- Service Socket Voltage: 230 VAC- Pneumatic System Minimum Pressure: 5 bar- Pneumatic System Minimum Air Flow Rate: 250 l/min (indicated as 200 l/min on physical nameplate)- Axis Travel / Movement (X-Axis): Type dependent- Axis Travel / Movement (Z-Axis): 75 mm (Standard, Pneumatic drive)- Axis Travel / Movement (M-Axis): 360° (Standard, Electric drive)- Net Machine Weight: 1300 kg- No longer connected to power, machine is defective- Viewing available

Condition: new, Year of construction: 2025, Al-Ko clean air deduster Exhibition piece (no operating hours yet - new) Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Dodpfx Asbuvbrjqvokn Max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Technical data: ALKO clean air - mobile extraction unit, type Mobil-Power Unit APU 120, motor power 1.5 KW, intake Ø=120 mm, soundproofed, mobile dust garbage can 135 ltr, manual filter cleaning, dimensions: L= 1,085 mm, W= 650 mm, H= 1,985 mm, volume dust garbage can: 135 liters, weight: 117 kg, nominal volume flow (after cleaning): 814 m³ / h, Exhibition piece At an absolute special price Location: From stock Bitburg Dedecdy Ndopfx Aqvokn

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. Dkodecnw U Depfx Aqvjn All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: new, Year of construction: 2025, Description: IE 3 motor standard max. volume flow up to 8.500 m³/h at the fan approx. 73 m² filter surface, residual dust content according to H3 Pre-separator standard 71 dB (A) at full load (according to DIN EN ISO 11201) already complies with prEN 16770 Optional: Models with type-tested rotary valve (FSA) Tested back pressure flap Integrated automatic venting system Intake port: 350 mm Nominal motor power: 11 KW Voltage: 400 V/ 50 HZ Max. volume flow: 8500 m3/h Nominal volume flow: 6927 m3/h Negative pressure at Vnom. 2765 Pa Filter area: 73 m2 Spa collection volume: (net/gross) 3x165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (LxWxH) 3112 x 1058 x 2351 mm Dedpjcqy I Sefx Aqvokn Weight: 1074 kg Location: in stock 54634 Bitburg

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine recognition Clean air extraction system with H3 approval Suction connection: 120 mm Nominal motor power: 1.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow: 1,140 m³ / h Nominal volume flow: 814 m³ / h Negative pressure: 2.180 Pa Filter area: 5,1 m² Chip collection volume: approx. 135 litres Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Dkodehkztwopfx Aqven Weight: approx. 121 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, IE 3 engine as standard maximum flow rate up to 10,000 m³/h to the fan about 73 m m² filter area Pre-filter as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content 0,1 mg / m ³ safely complied (wood dust) Models with construction pattern tested rotary valves (FSA) Approved non-return valve Built-in automatic fire extinguishing system 350 + P Intake manifold 355 mm Rated motor power 15.0 kW/3Ph Voltage 400 V / 50 Hz maximum volume current 10,000 m³/h Nominal flow rate * 7.127 m³/h Depression at Vnom. 3.347 PA Djdpodqzhhjfx Aqvokn Filter area 73 m² Chip collecting volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level * 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2.361 Weight 1,074 kg

Condition: new, Year of construction: 2025, Exhibition piece- is sold at a special price Will be sold at a special price Technical data 300-P Intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2 280 Pa filter surface: 30 m² Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Djdpfxscdy I Tj Aqvekn Special: unit is equipped with sound absorber - therefore extremely quiet - can be sold with or without Location: Ex stock 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2026, The captivating advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and pleasant working climate due to diagonal low-turbulence air flow. Large airflow window due to air baffles - therefore also suitable for larger workpieces. Separation efficiency of paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² - therefore long filter life! Easy and quick filter change on the front side. Inexpensive replacement filters. Low purchase costs and extremely low energy consumption. Dksdpecnz Iqjfx Aqvon Dry splashboard made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter and glass fibre filter as after-filter unit. Ex-fan incl. throttle valve mounted on the left. Do not compromise on the quality of the surface. Easy Paint extraction walls are the ideal cost-effective solution for effective collection and filtering of paint mist and extraction of solvent vapours. Robust and powerful but economical in consumption. The IPE double filtration system provides two filter stages for a maximum separation efficiency of up to 99 %. The cardboard labyrinth filter initially absorbs considerably more overspray (up to 18 kg/m² filter surface) than conventional filter mats due to the folded filter pockets. The downstream glass fibre secondary filter absorbs only the finest residual particles. As a guide value, the cardboard labyrinth filter, depending on

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Dsdpfjw Sgnkjx Aqvskn Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: as good as new (ex-display), Year of construction: 2026, The impressive advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and a pleasant working environment due to diagonallow-turbulence air-stroemung. Large detection window thanks to air guide plates – thus also suitable for larger factory troughs. Separation degree of paint mist up to 99%, return ability of the pre-filter up to 18 kg/m2 - thus great filter life! Easy and fast filter change on the front. Cost-cost replacement filters. Low acquisition costs and low energy requirements. Dry spray wall made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter and glass fiber filter as post-filter unit. Ex-fan incl. throttle valve attached to the left. Dodpfsdqc U Hsx Aqvjkn Do not compromise on the quality of the surface. Suction-weighing Easy Paint are the ideal cost-effective application for the effective detection and filtering of the paint mist as well as the suction of the solvent dimempfe. Robust and powerful but economical in consumption. Thanks to the IPE double filtration system, two filter levels ensure a maximum separation degree of up to 99%. Thanks to the folded filter pockets, the cardboard labyrinth filter absorbs considerably more overspray (up to 18 kg/m2 filter area) than conventional filter mats. The downstream fiber glass fiber second-based filter absorbs only the finest residual particles. As a guideline, the cardboard labyrinth

Condition: new, Year of construction: 2025, Al-Ko clean air dust extractor year 2024 Dodpfecdy I Rox Aqvokn Exhibition piece - Immediately available Absolute special price Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Clean Air Dust Collector RLA 160 For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft For wood shavings and dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Dkedpfx Aecnw T Ijqvjn Maximum performance in this class Very quiet Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Can also be used for multiple dust sources High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bags System delivered fully assembled, allowing for quick deployment Mobile Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece Aluminum-coated, washable, and therefore with a long service life. Filter comes standard with an antistatic design, tested and approved according to category M-BIA. Filter resistance monitoring via differential pressure cell, adjustable via a warning light on the control box. The fan is installed downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan impeller. Inspection opening for cleaning the bypass filter. 5 m connection cable with 5-pin CEE plug and phase inverter. 2 fixed and 2 swivel casters with parking brake. Manual cleaning. Model RLA 160 Item no. 5131620 Technical Specifications Intake manifold diameter 160 mm Nominal flow rate 1448 m³/h Max. flow rate 2400 m³/h Valve pressure at Vnenn 2247 Pa Filter area 9.21 m² Filter material dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning Compressed air supply Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (length x width x height) 1681 x 830 x 1654 mm Weight 254 kg Location: Ex warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, An all-round reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small and medium extraction volumes or an ideal supplement to existing stationary systems. Your advantages: - IE 3 motor as standard - approx. 73 m² filter surface - Pre-separator as standard - Certified according to GS-HO-07 - H3 residual dust content 0.1 mg/m³ safely complied with (wood dust) - Optionally with type-tested rotary valve (FSA) - Tested backwater flap - Integrated automatic extinguishing system Technical data: - Nominal motor power: 11.0 kW /3 Ph - voltage: 400 V / 50 Hz - max. volume flow: up to 8,500 m³/h at the fan - nominal volume flow: 6.927 m3/h - Negative pressure at nominal V: 2,543 Pa - Intake connection: 350 mm - Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) - Chip collection volume (net/gross): 3 x 165 L / 3 x 250 - Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 - Net weight without packaging: 977 kg - Dust class H3 Location: ex stock 54634 Bitburg Dsdpfxshkzt No Aqvekn - immediately available - as in stock subject to prior sale