Used Probst Easy Clean for sale (10,800)

Condition: excellent (used), Year of construction: 2020, READY TO USE IMMEDIATELY! This degreasing system operates under vacuum with modified alcohol. Degreasing of metal components contaminated with oil and chips from machining. Suitable solvents: modified alcohols Class AIII hydrocarbons (flash point > 55°C) Ultrasonic Weber 750W 40kHz Double loading table Double bag filter Lubrication Corrosion protection (spraying) Cartridge filter Very good condition (system has been used very little) 6-month warranty From Service Metalclean AG System processes: spray, immersion, ultrasonic, and vapor degreasing including vacuum drying. Specifications: Basket dimensions: 480 x 320 x 200 mm (h) Maximum load: 50 kg Average batches per hour: up to 5 System dimensions: 1600 x 1600 x 2400 mm (h) Giedpfxshg Ugis Admel System weight: 2300 kg Connected load: 16 kW Energy consumption: 10 kW/h Solvent volume: approx. 250 liters

Condition: as good as new (ex-display), Year of construction: 2023, heating capacity: 7 kW (9.52 HP), tank capacity: 350 l, inner dimension height: 600 mm, inner dimension length: 900 mm, inner dimension width: 650 mm, input voltage: 400 V, input frequency: 28,000 Hz, High power ultrasonic cleaning machine Ultratecno EASY-350L. Demo machine from 2023 used for presentations and exhibitions by the distributor in Poland. Excellent condition, like new. Gijdpfx Aoq Ruxmodmel Highest quality of components and several innovative solutions backed by 50 years of experience in manufacturing of ultrasonic cleaning machines. Included pneumatic elevator with platform for max. load 125 kg (max. static load 250 kg). Oil separation tank with pump. Special 50mm insulation. Working chamber dimensions: 900 x 650 x 600 mm. Ultrasound frequency: 28 kHz. Ultrasound power: 2 kW. More technical information included in attached technical sheet. Manufactured in Spain.

Condition: excellent (used), CATALOG NO. 6623 TECHNICAL DATA - Diameter of processed logs: 75–200 mm - Minimum input material length: 1100 mm - Stepless feed speed adjustment + forward/reverse - Cutterhead drive motor: 15 kW - Feed motor: 1.7 kW Sequence: - 2 geared feed rollers - 4-knife cutterhead - 2 smooth outfeed rollers - Electrically adjustable cutterhead - Electrically adjustable rollers - Dimensions (LxWxH): 3570 x 1300 x 1700 mm - Weight: approx. 4000 kg Giodpfx Adsx Rqzasmsl ADVANTAGES – Manufactured in Germany - Suitable for taper turning of posts – Used rounder, in very good condition Net price: 129,900 PLN Net price: 30,920 EUR (based on 4.2 EUR/PLN rate) (Prices may change according to currency fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes to identify the goods. We only resell items that were previously placed on the market by the manufacturer. We have no business affiliation with the manufacturer.

Condition: excellent (used), functionality: fully functional, fuel tank capacity: 10 l, color: original, overall weight: 570 kg, empty load weight: 570 kg, operation weight: 570 kg, lifting power: 150 kg/m, Year of construction: 2015, operating hours: 1,400 h, Equipment: pallet forks, Probst Jumbo-BV-Vario vacuum kerb lifter. In perfect working order but has some age related marks. Very well maintained and regularly serviced. This machine enables the laying of up to 400m of kerbs to be laid daily with just one operator feeding the kerb layer with no manual handling and just moving levers! Honda GXV390 petrol engine which is bullet proof when filters are cleaned regularly. Also available with the machine are Quick Hitch fork attachments to suit a Manitou telehandler and numerous different lifting plates to suit a variety of kerb shapes and sizes. Videos are available of the machine working. Gijdpfx Asxvqclodmjl

Condition: used, Year of construction: 2017, Robot cell ABB robot with Clean Laser Manufacturer: ABB / Clean Laser Model: IRB4600 Year of manufacture: 2017 System consists of: ABB robot IRB4600 Godpfx Adewrcn Ujmeil Control cabinet Handheld operator panel Laser cleaning device Clean Laser type intelliScan30 Extraction unit TEKA

Condition: new, Year of construction: 2022, functionality: fully functional, Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads Gijdpfsubbryox Admsl - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel

Condition: used, WEMA Probst profile milling machine Hauptmtor 11kW dismantled and reverse loading ready Gisdpfoc N N U Nsx Admol

Condition: used, Year of construction: 2014, operating hours: 23 h, The For Clean Pro 66 is a compact ride-on scrubber that is ideal for cleaning tight spaces. Its 75 cm working width, low noise level, and small turning radius make it possible to clean indoor areas, even when colleagues are working nearby. The machine's design and comfortable seat ensure the operator has ample legroom and clear forward visibility. The high working speed and large dirty and clean water tanks of 125L and 110L respectively make this machine highly suitable for daily use. The battery is fully charged in 8 hours, after which you can scrub for approximately 3 hours. Simplicity, reliability, and efficiency are complemented by maximum user comfort. This machine has less than 30 hours on the clock and is already run-in! All our used machines come standard with: - Complete maintenance service - New battery pack - Free onsite delivery Godpenwnvwsfx Admsil - New wear parts and squeegees - Service and overhaul - Explanation and instruction - Cleaning agents - Brushes and accessories tailored to your floor Additionally, at Metech you can rely on us for all maintenance needs of your machine and for ordering cleaning agents. Alongside this used For Clean Pro 66, we also have new scrubber dryers and demo models available. Check out our new scrubber dryers for more information. Would you like to know more about this scrubber or see it in action at your location? Contact us or request a demo via this page.

Condition: excellent (used), CATALOG NUMBER 7661 TECHNICAL DATA - max machining diameter range: 140 mm - min input material length: 900 mm - machining allowance (on diameter): max 30 mm - cutter head drive motor: 15 kW - stepless feed speed adjustment via inverter - feed motor approx. 2.2 kW - pneumatic cylinders: 2 pcs Giodpfjwnnkmex Admol - knife setting tool included - additional bushings in the set: 80, 100, 130 mm - mounted bushing diameter: 70 mm In order: - infeed chute - 4 gear-driven feed rollers (first two pneumatically adjustable) - 3-knife cutter head - 3 smooth outfeed feed rollers - dimensions (LxWxH): 4500x850x1800 mm - weight approx. 3000 kg ADVANTAGES – 2 pneumatic cylinders – knife setting tool – additional bushings included – used rounder/turning machine – very good condition Net price: 43,900 PLN Net price: 10,450 EUR based on a 4.2 exchange rate (Prices may change with significant rate fluctuations)

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,985 h, machine/vehicle number: L18_1463, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser type: diode laser, laser source manufacturer: CleanLaser, laser source model: CL 300, laser hours: 721 h, laser power: 300 W, laser wavelength: 1,064 nm, working length: 500 mm, working width: 900 mm, working height: 40 mm, compressed air connection: 6 bar, overall weight: 2,300 kg, total length: 4,500 mm, total width: 3,300 mm, total height: 2,215 mm, year of last overhaul: 2024, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, The system on offer is a laser cleaning cell manufactured by cleanLASER (model cleanCELL 2220), designed for industrial cleaning applications. In our case, it was used for cleaning stainless steel parts prior to adhesive bonding. The cell was in operation until the first quarter of 2024. The cell is equipped with a 300-watt diode-pumped ND:YAG laser, enabling precise and contactless surface cleaning. Components & Features: - Workstation: The cleanCELL 2220 features an X-Y-Z axis system for precise laser head positioning, two workstations, and six workpiece carriers. Gjdpfx Aoxxvviodmoil - Conveyor System: A BOSCH Rexroth conveyor system ensures the transportation of workpieces. - Peripheral Equipment: The unit includes a TEKA extraction system (LFE-301) for removing particles and a KLH cooling system for laser temperature regulation. - Safety: Full enclosure ensures the system meets Laser Safety Class 1 during operation. A spark detection system is also integrated. Documentation: Documentation can be provided upon request. Maintenance & Condition: The system was serviced annually, with the last maintenance performed on 05.01.2024. In the past, the resonator was replaced under warranty due to a loss in power output. Currently, the system has been relocated from its original position due to space constraints and is not connected to any power supply. Spare Parts: The system comes with a spare parts package containing various valves, timing belts, filter cartridges, desiccant, activated carbon filters, etc. Handover & Collection: Handover of the item takes place at the seller's business premises. After clarification of the technical details regarding disassembly, the item will be available for collection at that location. Disassembly and transportation are to be carried out by the buyer at the buyer's own expense and risk. The buyer is required to comply with the “Instructions and Regulations for External Companies” (information available upon request). The seller will issue an invoice based on the signed purchase contract. Handover of the item will occur upon receipt of a payment confirmation.

Condition: used, functionality: fully functional, Wema Probst QF50 Cross-Mill Machine Cross-Mill machine for processing round timber with a swivel table for adjusting the milling angle. 2 machining stations Giodpfx Adswc Tdnsmel 1 cross-milling unit 1 drilling unit

Condition: used, Floor cleaners, floor preparation products, floor coating Gjdpfx Aoqyi Unsdmsil -Manufacturer: Multi Clean, floor cleaner, floor preparation agent -Types: Ultra Brite II Ultra Primer -Type/Quantity: see photo parts list -Price/tax: complete -Transport dimensions: 1200/800/H400 mm -Total weight: 138 kg

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: CS27069, CS Clean Systems Cleansorb CS065SC Gedpfjwm Il Ujx Admeil Shows slight signs of wear (see pictures)

Year of construction: 2013, operating hours: 1,300 h, condition: reconditioned (used), Skid similar but not Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Falch xs31.1-30-500 30l/min. at 500bar (year 01/08) - Engine: electric 30kW - 1250l water tank - pressure gauge - pressure regulator - safety valve - Steel frame powder coated Gedpjg Tm N Asfx Admeil - Aluminum covers - Forklift lugs and crane eyes - Dimensions with 1250l water tank: approx. 1.100 x 1.760 x 1.770 - Empty weight: 1.085 kg - Year of construction: 2013 - Operating hours: approx. 1500 h Condition: high pressure pump 06/2022 overhauled. In very good used condition.

Condition: new, Hydraulic tapping machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm Thread M 5 - M 24 Working range 2050 Rmax. Working height 920 mm Table surface 900 x 700 mm Oil capacity 100 l Motor power 3.0 kW Weight: 220 kg Equipment: Hydraulic tapping machine Gsdpfx Aotbawkjdmsil Incl. machine base with clamping disk Mobile Hydr. pressure gauge Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: used, Year of construction: 2014, Used capping machine Clean Pack up to 2500 bph Machine Specifications Firstly, the CLEAN PACK brand capper features a single-head configuration, specifically designed for applying T-caps. Importantly, this technical choice allows for precise cap placement, which is essential for ensuring the integrity of the bottled product. Moreover, the cap distribution system operates through vibration mechanisms, an effective method for sorting and feeding caps to the capping device without interruptions. Speed Adjustment of the Used capping machine Clean Pack up to 2500 bph Secondly, the production speed of the capper is adjustable via an inverter. This allows fine control of the capping rate, tailored to the desired production rhythm. Consequently, this adjustment capability proves particularly useful in dynamic production environments, where requirements can quickly change. Giedpfsvgt Icjx Admol Configuration and Safety Additionally, the bottle entry flow is thoughtfully designed to come from the left, a configuration that adapts to different line arrangements. Furthermore, integrated safety protections in the machine’s design are a crucial aspect, aiming to minimize operational risks for the bottling line operators. Materials and Maintenance of the Used capping machine Clean Pack up to 2500 bph Similarly, the capper is constructed with a painted frame and stainless steel cladding. This choice not only provides robustness to the machine but also facilitates its cleaning and maintenance. Notably, stainless steel is known for its corrosion resistance, ensuring a long operational life of the machinery in humid environments. Production Capacity and Bottle Format Equally important, suitable for rectangular-shaped bottles, the capper achieves a production capacity of about 2,500 bottles per hour. This data highlights the system’s efficiency in handling high production volumes, maintaining precision standards in capping. Additionally, the machine is supplied with an existing bottle format, facilitating integration into pre-existing production lines. Operational Conditions and Year of Production Finally, produced in 2014, this machine has seen limited use, a condition that preserves its original efficiency and reliability features. The infrequent use of this capper ensures that the machinery maintains optimal performance, representing a valuable resource for bottling processes that require high precision and reliability. In summary, after careful consideration, the technical analysis of the used CLEAN PACK capper up to 2500 bph reveals an advanced equipment. It is characterized by engineering solutions aimed at productive efficiency, operational safety, and ease of maintenance. Its ability to adapt to different production rhythms and bottle formats makes it a versatile choice for the bottling industry.

Year of construction: 2008, condition: refurbished (used), JÖNI EASY 30 & 50 LIT Giodpef T R Aksfx Admjl ID.NO. 1160 2x cooking pots Jöni model easy 30 & 60 liter year mod 2008 electric tip easy to use and repair when needed.

Condition: used, Respiratory protection filter Giedpjd N Ap Eefx Admol -Clean AIR: basic 2000 -P SL R Art. No.: 80 00 10 -Price: per piece -Number: 17 pieces -Dimensions: Ø 131/54 mm -Weight: 0.1 kg/piece

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Sorting system for small-diameter wood and stakes Giodpfxswqf S Hj Admel for RH milling machines or other purposes. Consisting of: Inclined feed with retaining hooks. Disc sorting / cascade system with 3 separation steps. Wood length from 0.3 m to 5.5 m. Wood diameter up to approx. 12 cm. Ready for demonstration.

Year of construction: 2020, condition: used, No. 3233 Cross milling machine Wema Probst QBV 200 Used, year of construction 2020 The machine is in mint condition, less than 30 holes have been drilled. The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs. This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment. Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc. The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column. The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out. The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill. Gijdpewt Abwefx Admjl Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools Wood diameter: 60 - 200 mm Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range Motor capacity: 2.2 kW Number of revolutions: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm LWH Weight approx. 380 kg Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: new, Hydraulic threading machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm thread M 5 - M 24 Working range 2050 Rmax. working height 920 mm table surface 900 x 700 mm oil capacity 100 l Motor power 3,0 kW Gedpfx Adskhmgiomjil Weight:220 kg Equipment: Hydraulic threading machine Incl. machine base with clamping disk Mobile Hydr. manometer Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: like new (used), Year of construction: 2006, functionality: fully functional, 1- Loading of logs 2 -Entry to cylinder 3 - Cylinder Diameter of rollers obtained 75-200mm minimum length of input material 1100 mm 15kW knife head drive motor smooth regulation of forward speed + forward / backward + Gedpfxethqqms Admoil 1.7kW feed motor At the same time: 2 + toothed sprocket rollers Knife head 4 + 2 + smooth drawing drag rollers electrically adjustable blade head 0.25kW electrically adjustable axles 1.1kW dimensions length / width / height 3570x1300x1700mm weight around 4000kg 4-Cylinder outlet

Condition: good (used), Manufacturer: Easy-Link Gjdpjhyw N Sofx Admeil Overall dimensions: 2400 x 700 x 2300 mm Box size: 700 x 760 x 500 mm Belt size: 2700 x 190 mm

Condition: excellent (used), EasyRobotics ProFeeder Compact – 6 Shelf Version The EasyRobotics ProFeeder Compact is a versatile, space-saving automation solution designed for loading and tending CNC machines in small to medium batch production. This 6-shelf variant offers increased capacity, making it ideal for extended unmanned operation and enhanced productivity. ✅ 6 shelves for maximum workpiece storage – provides CNC machines with extended autonomy ✅ Compact footprint – just approx. 1165 × 400 × 600 mm, fits easily in tight workshop spaces ✅ Flexible robot integration – compatible with most collaborative robots (cobots) ✅ Secure tray locking – available with mechanical or pneumatic locking systems ✅ Integrated controller compartment – eliminates the need for a separate control pedestal ✅ Fast changeovers – shelves can be quickly swapped for new batches With up to 6 trays, each supporting between 60 and 120 kg, the ProFeeder Compact ensures stable and continuous machine operation. It is the ideal solution for manufacturers aiming to increase efficiency, minimize downtime, and advance towards smart factory automation. Gedpjw Tunuofx Admeil

Year of construction: 2008, condition: excellent (used), Sorting system for small-diameter wood and stakes for RH milling machines or other purposes. Consisting of: Inclined feed with retaining hooks. Disc sorting / cascade system with 3 separation steps. Gjdpfx Aewqdc Rodmoil Wood length from 0.3 m to 5.5 m. Wood diameter up to approx. 12 cm. Ready for demonstration.