Used Clean Pool for sale (6,642)

Condition: used, Year of construction: 2017, Robot cell ABB robot with Clean Laser Manufacturer: ABB / Clean Laser Model: IRB4600 Godpowrcn Usfx Ag Estt Year of manufacture: 2017 System consists of: ABB robot IRB4600 Control cabinet Handheld operator panel Laser cleaning device Clean Laser type intelliScan30 Extraction unit TEKA

Condition: used, Year of construction: 2014, operating hours: 23 h, The For Clean Pro 66 is a compact ride-on scrubber that is ideal for cleaning tight spaces. Its 75 cm working width, low noise level, and small turning radius make it possible to clean indoor areas, even when colleagues are working nearby. The machine's design and comfortable seat ensure the operator has ample legroom and clear forward visibility. The high working speed and large dirty and clean water tanks of 125L and 110L respectively make this machine highly suitable for daily use. The battery is fully charged in 8 hours, after which you can scrub for approximately 3 hours. Simplicity, reliability, and efficiency are complemented by maximum user comfort. This machine has less than 30 hours on the clock and is already run-in! All our used machines come standard with: - Complete maintenance service - New battery pack - Free onsite delivery - New wear parts and squeegees - Service and overhaul - Explanation and instruction Gtedpfonwnvwjx Ag Eet - Cleaning agents - Brushes and accessories tailored to your floor Additionally, at Metech you can rely on us for all maintenance needs of your machine and for ordering cleaning agents. Alongside this used For Clean Pro 66, we also have new scrubber dryers and demo models available. Check out our new scrubber dryers for more information. Would you like to know more about this scrubber or see it in action at your location? Contact us or request a demo via this page.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,985 h, machine/vehicle number: L18_1463, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser type: diode laser, laser source manufacturer: CleanLaser, laser source model: CL 300, laser hours: 721 h, laser power: 300 W, laser wavelength: 1,064 nm, working length: 500 mm, working width: 900 mm, working height: 40 mm, compressed air connection: 6 bar, overall weight: 2,300 kg, total length: 4,500 mm, total width: 3,300 mm, total height: 2,215 mm, year of last overhaul: 2024, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, The system on offer is a laser cleaning cell manufactured by cleanLASER (model cleanCELL 2220), designed for industrial cleaning applications. In our case, it was used for cleaning stainless steel parts prior to adhesive bonding. The cell was in operation until the first quarter of 2024. The cell is equipped with a 300-watt diode-pumped ND:YAG laser, enabling precise and contactless surface cleaning. Components & Features: - Workstation: The cleanCELL 2220 features an X-Y-Z axis system for precise laser head positioning, two workstations, and six workpiece carriers. - Conveyor System: A BOSCH Rexroth conveyor system ensures the transportation of workpieces. - Peripheral Equipment: The unit includes a TEKA extraction system (LFE-301) for removing particles and a KLH cooling system for laser temperature regulation. - Safety: Full enclosure ensures the system meets Laser Safety Class 1 during operation. A spark detection system is also integrated. Documentation: Documentation can be provided upon request. Maintenance & Condition: The system was serviced annually, with the last maintenance performed on 05.01.2024. In the past, the resonator was replaced under warranty due to a loss in power output. Currently, the system has been relocated from its original position due to space constraints and is not connected to any power supply. Spare Parts: The system comes with a spare parts package containing various valves, timing belts, filter cartridges, desiccant, activated carbon filters, etc. Handover & Collection: Handover of the item takes place at the seller's business premises. After clarification of the technical details regarding disassembly, the item will be available for collection at that location. Disassembly and transportation are to be carried out by the buyer at the buyer's own expense and risk. The buyer is required to comply with the “Instructions and Regulations for External Companies” (information available upon request). The seller will issue an invoice based on the signed purchase contract. Handover of the item will occur upon receipt of a payment confirmation. Godpfxjxxvvie Ag Ejtt

Condition: used, Floor cleaners, floor preparation products, floor coating Godsqyi Unopfx Ag Eott -Manufacturer: Multi Clean, floor cleaner, floor preparation agent -Types: Ultra Brite II Ultra Primer -Type/Quantity: see photo parts list -Price/tax: complete -Transport dimensions: 1200/800/H400 mm -Total weight: 138 kg

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: CS27069, CS Clean Systems Cleansorb CS065SC Shows slight signs of wear (see pictures) Gtjdowm Il Uspfx Ag Est

Year of construction: 2013, operating hours: 1,300 h, condition: reconditioned (used), Skid similar but not Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Falch xs31.1-30-500 30l/min. at 500bar (year 01/08) - Engine: electric 30kW - 1250l water tank - pressure gauge - pressure regulator - safety valve - Steel frame powder coated - Aluminum covers Gtsdpeg Tm N Aofx Ag Eot - Forklift lugs and crane eyes - Dimensions with 1250l water tank: approx. 1.100 x 1.760 x 1.770 - Empty weight: 1.085 kg - Year of construction: 2013 - Operating hours: approx. 1500 h Condition: high pressure pump 06/2022 overhauled. In very good used condition.

Condition: used, Year of construction: 2014, Used capping machine Clean Pack up to 2500 bph Machine Specifications Firstly, the CLEAN PACK brand capper features a single-head configuration, specifically designed for applying T-caps. Importantly, this technical choice allows for precise cap placement, which is essential for ensuring the integrity of the bottled product. Moreover, the cap distribution system operates through vibration mechanisms, an effective method for sorting and feeding caps to the capping device without interruptions. Speed Adjustment of the Used capping machine Clean Pack up to 2500 bph Secondly, the production speed of the capper is adjustable via an inverter. This allows fine control of the capping rate, tailored to the desired production rhythm. Consequently, this adjustment capability proves particularly useful in dynamic production environments, where requirements can quickly change. Configuration and Safety Additionally, the bottle entry flow is thoughtfully designed to come from the left, a configuration that adapts to different line arrangements. Furthermore, integrated safety protections in the machine’s design are a crucial aspect, aiming to minimize operational risks for the bottling line operators. Materials and Maintenance of the Used capping machine Clean Pack up to 2500 bph Similarly, the capper is constructed with a painted frame and stainless steel cladding. This choice not only provides robustness to the machine but also facilitates its cleaning and maintenance. Notably, stainless steel is known for its corrosion resistance, ensuring a long operational life of the machinery in humid environments. Production Capacity and Bottle Format Equally important, suitable for rectangular-shaped bottles, the capper achieves a production capacity of about 2,500 bottles per hour. This data highlights the system’s efficiency in handling high production volumes, maintaining precision standards in capping. Additionally, the machine is supplied with an existing bottle format, facilitating integration into pre-existing production lines. Operational Conditions and Year of Production Godpovgt Icsfx Ag Eott Finally, produced in 2014, this machine has seen limited use, a condition that preserves its original efficiency and reliability features. The infrequent use of this capper ensures that the machinery maintains optimal performance, representing a valuable resource for bottling processes that require high precision and reliability. In summary, after careful consideration, the technical analysis of the used CLEAN PACK capper up to 2500 bph reveals an advanced equipment. It is characterized by engineering solutions aimed at productive efficiency, operational safety, and ease of maintenance. Its ability to adapt to different production rhythms and bottle formats makes it a versatile choice for the bottling industry.

Condition: used, 🧰 Product Features • Condition: Used item, see photos • Colour: grey • Material: metal • External dimensions: 124 x 83.5 x 97 cm Gsdjvb T Ewspfx Ag Eett • Load capacity: 1000 kg • Stack load: 5000 kg • Weight: 78 kg • Front side: foldable • Base: sheet metal floor with wooden insert 💰 Price €99 net, excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: by appointment at any time Over 5000 linear metres of pallet racking from numerous manufacturers constantly in stock (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.)

Condition: used, Respiratory protection filter -Clean AIR: basic 2000 Gtsdpfx Agsd N Ap Ej Eet -P SL R Art. No.: 80 00 10 -Price: per piece -Number: 17 pieces -Dimensions: Ø 131/54 mm -Weight: 0.1 kg/piece

Condition: used, This listing is for a Microwave Laboratory Systems MLS Milestone traceClean Gtodpfxoxzh E Ue Ag Ejt The traceCLEAN operates as a fully automated, self-contained acid steam cleaning system. Items to be cleaned are placed inside the unit, where freshly distilled acid vapors (typically nitric or hydrochloric acid) are generated and continuously refluxed within a sealed chamber. This process effectively leaches any metal contaminants from the surfaces of the items. After the cleaning cycle, the items are cooled, dried, and stored until needed

Condition: used, mileage: 254,395 km, first registration: 02/2005, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 6,350 mm, total width: 2,220 mm, total height: 2,950 mm, loading space length: 4,300 mm, loading space width: 2,100 mm, loading space height: 2,050 mm, Year of construction: 2005, Suspension: leaf spring Front axle: steered Rear axle: twin tyres Gross vehicle weight: 3,500 kg Contact Thierry Leemans for more information. Godpfxox Tyy Re Ag Ejtt

Condition: new, with compressed air cleaning and frequency converter Startup with frequency converter, Pressure transmitter for demand-based control Pre-separator integrated, Automatic fire extinguishing system integrated Efficient and economical: Large-capacity compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Gtjdjxpximspfx Ag Eet So simple and so effective: OPTI JET cleaning and filter bags with snap ring closure. Exceptionally economical: energy-efficient drives according to IE3 Safe in case of emergency: maintenance-friendly fire extinguishing system. Extremely quiet operation: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic modes. Countless options from machine recognition to gate actuation to frequency-controlled operation, to name just three examples. Nothing left to chance: collection container with inspection window. Practical in every detail: container fastening with ergonomically shaped clamping lever. Expandable at any time: retrofit for discharge via briquetting press or rotary valve possible. - High extraction performance - Compact footprint - 100% air recirculation without temperature loss - (Residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control system - Optimal filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust barrier for dust-free bin changes - (Optional: safety locking system for the containers) - Freely configurable module exchange and expandable ----- Technical Data ----- Extraction nozzle diameter: 350 mm, Nominal air flow rate: 6,927 m³/h, Maximum air flow rate: 8,500 m³/h, Maximum negative pressure: 2,543 Pa, Filter surface: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3, Motor 400 V: 11.0 kW, Dimensions (LxWxH): 3,340 x 1,058 x 2,351 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, according to: GS - HO - 07

Year of construction: 2015, condition: excellent (used), Clean Air Workbench Heraguard HPH 15 Thermo Scientific Used Location Cologne regularly serviced Gjdpfjiv S Agox Ag Estt Laboratory resolution various microscopes and other equipment gladly

Condition: excellent (used), mileage: 165,944 km, first registration: 01/1988, fuel type: diesel, tire size: 205/75 R16C, axle configuration: 4x2, fuel: diesel, driver cabin: day cab, gearing type: mechanical, number of gears: 5, suspension: steel, number of seats: 2, total length: 5,500 mm, total width: 2,150 mm, total height: 2,850 mm, Year of construction: 1988, TRANSPORT TO ANTWERP 390 EURO = Further information = Gsdsw Iqycspfx Ag Eott Tyre size: 205/75 R16C Suspension: leaf suspension Front axle: steered Unladen weight: 3,900 kg Technical condition: very good Optical condition: very good Reference number: 46

Condition: good (used), Year of construction: 1996, operating hours: 9,000 h, fuel type: diesel, Case IH International 845 XL Plus 4WD Tractor 1996 Very Neat! Video can be sent via WhatsApp. Gtjdex Rhh Dspfx Ag Est Ongoing stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2002, condition: used, This listing is for a WFI System with 2 Mueller Clean Steam Generators. The system was installed in 2002, is in working condition, and is ready for immediate use. ----- System Overview A complete Water For Injection (WFI) production, clean-steam generation, and storage system for pharmaceutical or biotech facilities. Produces ultra-high purity water and clean steam using dual Mueller steam generators, pressure columns, UV filtration, and automated control via a Pharma Tec panel. Gjdpoxv Aaijfx Ag Eott ----- Main Components Mueller Clean Steam Generators ×2 – dual units producing clean / pure steam for WFI and sterilization duties. Four Pressure Columns – separation, purification, and holding of steam / condensate under controlled pressure. Fristam Pumps – sanitary main supply pumps providing feedwater or circulation through the system. Hanovia UV Filters – ultraviolet sterilizing filters to remove microbiological contamination from feedwater or WFI stream. Pharma Tec Control Panel – automation and control system with PLC, level, temperature, pressure, and conductivity monitoring; full alarm & data-logging. ----- Key Features Dual redundancy via two clean steam generators allows maintenance or alternating load without shutdown. Four pressure columns improve separation, holding and stability of steam / condensate under varying pressure loads. UV filtration ensures microbiological safety in line with regulatory requirements. Sanitary pumps (Fristam) for clean design, ease of clean-in-place, and high hygiene. Automated control panel (Pharma Tec) providing precise monitoring, control, and regulatory compliance. ----- Specifications Manufacturer: Mueller, Fristam, Hanovia / Pharma Tec Year Installed: 2002 System Type: Clean Steam + WFI generation & storage Steam Generators: 2 × Mueller Clean Steam Generators Prize Pumps: Fristam sanitary feed / supply pumps Filtration: Hanovia UV sterilisation units on feed / WFI lines Control: Pharma Tec PLC / automation panel with full instrumentation (pressure, temperature, level, conductivity) Operating Conditions: Designed for pharmaceutical WFI-grade water and clean steam (sterile / pyrogen-free)

Condition: like new (used), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, We would be happy to advise you! Gtjdpfxorlm Rvj Ag Est Here we offer from our own inventory: 10x Filter Fan Unit (FFU) controllers together with digital control units. New price: €1,000 each. We also offer a cleanroom setup according to your requirements. See pictures for an example. The room elements are each 2.05 meters x 3.2 meters. The pictures are of a room we built for a Dutch customer. New cleanrooms have a guide price of €500 per square meter of floor space with a height of 2,500 mm and glazing. Example: 4x4 meters 4x4 = 16 * €500 = €8,000

Condition: new, with compressed air cleaning and frequency inverter Start-up with frequency inverter Pressure transmitter for demand-based control Pre-separator integrated Extinguishing system integrated Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure. Extremely efficient: Energy-efficient IE3-class drives. Safe in case of emergency: Service-friendly extinguishing system. Exceptionally quiet: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Countless options, such as machine recognition, damper control, and frequency-controlled operation, to name just a few. No mess: Collection container with inspection viewing window. Practical down to the last detail: Container locking with ergonomically shaped clamping lever. Gtedpfx Ajwzyh Reg Eot Easy retrofitting: Can be converted for discharge via briquette press or rotary valve. - high extraction capacity - minimal space requirement - 100% air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - integrated pre-separator and expandable control system - optimal filter cleaning - minimal noise level - optional: patented fill level monitoring - service-friendly, certified fire extinguishing system - dust barrier for dust-free container change - (optional: safety interlock for containers) - modules freely configurable and expandable ----- Technical Data ----- Extraction nozzle Ø: 355 mm Nominal air flow: 7,127 m³/h Max. air flow: 10,000 m³/h Max. negative pressure: 3,347 Pa Filter area: 73 m² Chip collection volume: 3 x 250 liters Number of bags: 3 pcs Motor 400 V: 15.0 kW Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm Sound pressure level: 73 dB(A) Weight: 1,064 kg according to: GS - HO - 07

Condition: excellent (used), Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is a high-end industrial 3D printer from the FDM (Fused Deposition Modeling) series. It is used worldwide in prototyping, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: - Stratasys Fortus 450mc (3D Production System) - Krumm Tec CLEAN MATIC 3150 cleaning system for support material - Badger Magnetics 8 kVA transformer (suitable for EU power supply) The system comes from a professional environment and was used for the production of high-quality functional parts and prototypes. Key Features of the Fortus 450mc: - Industrial FDM 3D printer with large build volume: 406 × 355 × 406 mm - Capable of printing high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* - Exceptional dimensional accuracy and repeatability - Network capable, touchscreen interface, user-friendly operation - Ideal for prototyping, small series production, toolmaking, jigs and fixtures (*dependent on material licenses) Technical Data Fortus 450mc: - Voltage: 120/208 V, 3-phase (transformer for EU operation included) - Power consumption: 18 A - Dimensions approx.: 127 × 91 × 196 cm - Software version as per display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150: - Model: CM 3150 US/PS - 4 kW, 400 V, 50 Hz, 16 A - Ideal for removing SR-30 / SUP706 support material - Weight: 140 kg Total Weight approx.: 600–700 kg Important Note: "The table shown in the photos is not included in the scope of delivery." Scope of Delivery: - Stratasys Fortus 450mc - Krumm Tec CLEAN MATIC 3150 cleaning system Gtodpfx Aex D Uqieg Eet - Badger Magnetics 8 kVA transformer (Technical specifications are subject to change and errors excepted!) If you have further questions, we would be happy to answer them by phone.

Condition: excellent (used), mileage: 801,695 km, power: 265 kW (360.30 HP), first registration: 05/1990, fuel type: diesel, tire size: 315/70 R22.5, axle configuration: 8x4, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: other, total length: 8,550 mm, total width: 2,500 mm, total height: 2,900 mm, loading space length: 5,500 mm, loading space width: 2,100 mm, loading space height: 1,450 mm, Year of construction: 1990, = Additional options and equipment = - Power take-off (PTO) = Remarks = TRANSPORT TO ANTWERP 590 EURO Gtodpjx Rkllsfx Ag Ejt = Further information = Front axle 1: Tyre size: 315/70 R22.5; Steered; Suspension: Leaf spring Front axle 2: Tyre size: 315/70 R22.5; Steered; Suspension: Leaf spring Rear axle 1: Tyre size: 315/70 R22.5; Twin-mounted; Suspension: Air suspension Rear axle 2: Tyre size: 315/80 R22.5; Twin-mounted; Suspension: Air suspension Unladen weight: 12,920 kg Tipper: Rear Technical condition: Very good Visual condition: Very good Reference number: 48

Condition: ready for operation (used), Year of construction: 2022, Control Unit Brand HAAS Main Drive Spindle speed range 12000 This 3-axis HAAS VF-2SSYT with Pallet Pool 3+1 was manufactured in 2022. It features a 30 hp, 22.4 kW in-line spindle, capable of 12,000 rpm, and a 50+1 tool changer. It includes a 15" screen and a 3+1 pallet pool with 900x450 mm pallets. If you are looking to get high-quality milling capabilities, consider the HAAS VF-2SSYT machine we have for sale. Contact us for more information. Gtjdjx Hbluopfx Ag Est Application Types Milling

Condition: new, Integrated pre-separator Integrated automatic extinguishing system Efficient and economical: large-volume compressed air tank with Gtodpfx Ageu R S A Re Eot with fast-switching diaphragm valves for effective OPTI JET filter cleaning and minimum compressed air consumption. So simple and so effective: OPTI JET cleaning and bag filter with bag filter with snap ring lock. Extremely economical: Energy-efficient drives in accordance with IE3 Safe in the event of an emergency: Maintenance-friendly automatic extinguishing system. Peace and quiet: the soundproofed air recirculation system from AL-KO. All options are open: PLC control for manual and automatic automatic operation. Countless options from machine detection to slide control to frequency-controlled operation operation, to name just three examples. Nothing goes wrong: Collecting container with inspection window. Practical down to the last detail: container lock with ergonomically ergonomically shaped clamping lever. Can be retrofitted: conversion to discharge via briquetting press briquetting press or rotary feeder possible. - High suction capacity - little space requirement - 100 % air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change - (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 300 mm, Nominal volume flow: 5,089 m³/h, max. volume flow: 6,000 m³/h, max. negative pressure: 2,587 Pa, Filter area: 30 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, according to: GS - HO - 07 - new exhibition machine -

Condition: new, Vacomats are mobile dust extractors that extract large quantities of dust and chips in the smallest of spaces. in the smallest of spaces. These clean air extraction systems (vacuum) for indoor installation can be installed indoors as single or multi-machine machines for air volumes of up to 10,000 m³/h can be used. Manufactured according to the new EU standard EN 16770, they are particularly suitable for wood processing operations in which special safety requirements due to the risk of dust explosion. Materials of dust explosion class St1 are suitable. The Vacomaten XPe filters are cleaned purely electro/mechanical via an efficient vibration motor, which - as soon as all machines are switched off - starts starts automatically. It is controlled via the the woodworking machine by means of potential-free contacts. The control of the motorized jogging is included in the scope of delivery. Supplied without coils Motorized filter regeneration, mobile, Suction side on right or left, can be reassembled, Gtjdpfxou T Dv Eo Ag Eet Height reduction possible for transportation ----- Technical data ----- Extraction nozzle Ø: 200 mm, Volume flow: 2,495 m³/h, Nominal volume flow: 2,262 m³/h, max. negative pressure: 2,000 Pa, Filter area: 14.5 m², Residual dust content: < 0.1 mg/m², Number of bags: 3 pieces, Motor: 4.0 kW, Dimensions (LxWxH): 2,645 x 900 x 2,130 mm, Weight: 500 kg, Sound pressure level: 73 dB(A), Dust class: M incl.: an attached control cabinet

Condition: new, SCHUKO Vacomat 140/160 XPe clean air extraction system - Exhibition unit - Filter generation motorized, mobile, extraction side right or left, can be remounted ----- Technical data ----- Test mark: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal volume flow: 1,447 m³/h, max. negative pressure: 2,200 Pa, Filter area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Dust class M: AWN 16 Gjdpfou R Szyox Ag Eott - new exhibition machine -

Condition: new, Vacomats are mobile dust extractors that extract large quantities of dust and chips in the smallest of spaces. in the smallest of spaces. These clean air extraction systems (vacuum) for indoor installation can be installed indoors as single or multi-machine extraction systems for air volumes of up to 10,000 m³/h. can be used. Manufactured in accordance with the new EU standard EN 16770 they are particularly suitable for wood processing operations in which special safety requirements due to the risk of dust explosion. Materials of dust explosion class St1 are suitable. The Vacomaten XPe filters are cleaned purely electro/mechanical via an efficient vibration motor, which - as soon as all machines are switched off - starts starts automatically. It is controlled via the the woodworking machine by means of potential-free contacts. The control of the motorized jogging is included in the scope of delivery. Supplied without coils Motorized filter regeneration, mobile, Suction side on right or left, can be reassembled, Height reduction possible for transportation ----- Technical data ----- Extraction nozzle Ø: 180 mm, Volume flow: 2,610 m³/h, Nominal volume flow: 1,832 m³/h, max. negative pressure: 2,450 Pa, Filter area: 13.5 m², Residual dust content: < 0.1 mg/m², Number of bags: 2 pieces, Motor: 3.0 kW, Gtedpfx Ageu T Hrij Eet Dimensions (LxWxH): 2,085 x 900 x 2,130 mm, Weight: 414 kg, Sound pressure level: 76 dB(A), Dust class: M incl.: an attached control cabinet