Used Precision Balance for sale (7,608)

Condition: used, This listing is for the Malvern CHR6000 + CHR7100 OMNISEC RESOLVE and REVEAL GPC/SEC These units are in full working condition and ready for immediate use What the System Measures The combined OMNISEC RESOLVE and REVEAL GPC/SEC System provides absolute molecular weight, intrinsic viscosity, concentration, and conformational data in a single run. This eliminates the need for calibration standards, improving accuracy and confidence in results. OMNISEC RESOLVE – The Chromatography Module OMNISEC RESOLVE integrates four key components into a single unit: Pump: Delivers a flow rate range of 0.01–10 mL/min with low pulsation (0.15% at 1 mL/min in water), ensuring stable baseline signals. Degasser: Features a low-volume (960 µL) design for rapid solvent exchange, enhancing system productivity. Autosampler: Accommodates up to 192 samples, with temperature control from 4°C to 60°C, suitable for both vials and 96-well microtiter plates. Column Oven: Controls temperatures up to 65°C, supporting up to six analytical columns for optimal separation conditions. This integrated design minimizes baseline noise and enhances measurement sensitivity, particularly for low-concentration or low-molecular-weight samples. OMNISEC REVEAL – The Detector Module OMNISEC REVEAL is an advanced, fully integrated, temperature-controlled multi-detector module that includes: Refractive Index (RI) Detector: Highly sensitive and stable, enabling accurate concentration measurement, even for low-concentration samples. UV/Vis Photodiode Array (UV-PDA) Detector: Measures absorbance at any wavelength from 190 to 900 nm, providing versatile detection options. Bledpsychy Aofx Afmsp Light Scattering Detectors (LALS & RALS): Deliver market-leading sensitivity, allowing measurement of molecular weights as low as 200 g/mol and injection masses as low as 100 ng, for highly reliable results. Viscometer: Features automated balancing for precise intrinsic viscosity measurements, with a user-exchangeable capillary bridge to minimize maintenance. The fully temperature-controlled design improves detector stability and overall sample characterization, ensuring optimal performance for sensitive applications. OMNISEC Software The OMNISEC software suite provides: Unified instrument control, data acquisition, and analysis. Calculations for molecular weight (Mn, Mw, Mz), polydispersity, radius of gyration (Rg), intrinsic viscosity, and Mark-Houwink parameters. Support for automated, unattended operation to streamline workflows. Key Advantages Exceptional Sensitivity: Measures molecular weights down to 200 g/mol and injection masses as low as 100 ng. Broad Wavelength UV/Vis Detection: Enables absorbance measurements across 190–900 nm. Superior Stability: Temperature-controlled detectors ensure consistent, high-quality results. Versatility: Ideal for polymers, polysaccharides, and proteins, with multi-detection SEC offering unmatched characterization detail. Integrated Design: Reduced inter-detector volume improves peak resolution and data quality. Accurate Viscosity Measurement: With automated viscometer balancing, ensuring reproducibility.

Condition: new, functionality: fully functional, Year of construction: 2026, The high-performance CBN borazon grinding wheel designed for the CORMAK DG20M drill sharpener is a key component ensuring precise sharpening of drills made of HSS high-speed steels and cobalt steels. It offers exceptional durability and accuracy essential in daily operations of toolrooms, mechanical workshops or maintenance departments. Main advantages of the DG20 grinding wheel High hardness and thermal resistance thanks to the CBN (borazon) abrasive material. Compatibility with the CORMAK DG20M sharpener – a wheel designed for this model guarantees perfect fit and maximum efficiency. Bsdpfx Afoycq Hromelp Vibration-free operation due to precise balancing – reduces the risk of tool damage and improves user comfort. Long service life – significantly reduced replacement frequency and lower operating costs. Stable geometry – no need for frequent shape correction, enabling consistent sharpening quality. Construction and technology The grinding wheel for the CORMAK DG20M drill sharpener is manufactured with CBN technology – borazon is one of the hardest abrasive materials known, ideally suited for machining high-speed steel tools. Thanks to precise workmanship and an optimised profile, the wheel ensures high sharpening efficiency while minimising material loss from the tool. Precision and work efficiency The use of an original CBN wheel in the CORMAK DG20 model provides excellent results even during long operating cycles. The wheel maintains an accurate point angle (within 90–135°), which affects cutting quality, reduces cutting forces and increases the service life of sharpened drills. Its vibration-damping properties minimise the risk of micro-chipping on cutting edges. Choose quality – select the original DG20M grinding wheel The CBN wheel for the CORMAK DG20M sharpener is an essential component for anyone who expects precision and reliability during drill sharpening. Thanks to its construction, material and perfect fit to the machine, it delivers long-lasting, efficient and repeatable operation. Order the original wheel today and keep your sharpener in full working condition.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH vibrating screens are engineered for aggregate, mining, and recycling applications, featuring a durable body for long service life. Their simple yet efficient design ensures precise screening of various materials. The modular structure allows easy maintenance and quick part replacement, while the user-friendly design boosts productivity. Screens can be produced as “top-driven” or “center-driven,” with steel or polyurethane surfaces depending on material hardness. High-frequency vibration provides effective material distribution and optimal separation. With powerful motors, balanced vibration, and damping systems, CONSTMACH screens ensure reliable, continuous operation. Vibrating Screen Technical Specifications Model: CVS-2060 Number of Layers: 2 / 3 / 4 Bledpfx Aoxpyinefmjp Layer Dimensions: 2,000 x 6,000 mm Production Capacity: 192 – 240 t/h Motor Power: 15 / 18.5 / 22 kW Weight: 17,500 – 20,500 kg Why Choose CONSTMACH Vibrating Screens? CONSTMACH offers maximum efficiency, low maintenance costs, and long service life with its screen systems manufactured to international quality standards. It provides solutions suitable for every capacity with its wide range of models. With superior engineering, a reliable drive system, and the use of highly durable materials, CONSTMACH offers its customers not just equipment, but a sustainable investment. If you are looking for high performance, low energy consumption, and easy maintenance in your production line, CONSTMACH Vibrating Screens are the most suitable solution for your needs. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-term use advantages.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK SH-30S PRECISA 400V Spindle Moulder The CORMAK SH-30S PRECISA 400V spindle moulder is a powerful and precise woodworking machine designed for professional wood processing in industrial plants, woodworking shops, and craft workshops. Thanks to its stable construction, interchangeable spindle, and wide range of spindle speeds, it provides the highest standard of performance when milling straight elements as well as complex profiles and shapes. Main advantages of the machine Stable cast iron table construction – provides excellent vibration damping and smooth movement of the workpiece. Spindle speed range: 1400 / 4000 / 6000 / 9000 rpm – allows processing of various types of wood and wood-based materials. Reinforced and balanced spindle – ensures quiet, precise operation without vibrations. Height adjustment with scale – enables accurate setting of machining parameters. Complete standard equipment included – including tilting fence, workpiece holders, and assembly tools. Compliance with safety standards, DTR documentation, and CE requirements – ensures safe operation and conformity with regulations. Construction and technology The CORMAK SH-30S PRECISA spindle moulder is based on a high-quality cast iron body, which effectively eliminates unwanted vibrations during operation. The 620 x 510 mm working table has been precisely ground to ensure smooth and even movement of the workpiece. The 2.2 kW (400V) motor provides sufficient power even during intensive operation. With a spindle stroke of 100 mm and a maximum tool mounting height of 105 mm, the machine is capable of handling a wide range of milling applications. Precision and working efficiency The CORMAK SH-30S PRECISA spindle moulder combines high build quality with practical functionality. Multi-stage spindle speed adjustment allows optimal matching of operating parameters to the type of material and cutting tool being used. Precise guides and fences enable accurate positioning of reference points, resulting in excellent repeatability and consistently high-quality machining results. Applications The CORMAK SH-30S PRECISA is suitable for: Professional woodworking companies and production facilities, Furniture workshops and craft studios, Manufacturing decorative mouldings, grooves, tongues, tenons, and joints, Processing edges of straight and curved components. Standard equipment Tilting fence adjustable 60° left/right, Workpiece holder, Workpiece stop, Anti-slip feet, Bjdpfxovugf Do Afmolp Assembly tools. Optional equipment Interchangeable spindle with ER20 collet chuck – enables quick machine setup changes and adaptation to different tools. Available at an additional cost of PLN 700 net.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 74300 € 1404.27 € 100 to 4.5 mm 700 mm 1000 mm 210 mm 1 - 132 mm 58 1/min 6 90 mm 60 mm 300 mm 445 mm 7.5 kW 1650 mm 1545 mm 3011 mm Bsdpfxjwiqq So Afmelp 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 8 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Hydraulic overload protection Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00

Condition: new, Year of construction: 2024, SCHORR electric platform pallet truck 2000KG / 2400MM / 24V 205Ah Powerful electric pallet truck with 2000kg load capacity and 2400mm forks. Designed for simultaneous transportation of 2 Euro pallets. ✓ 2000kg load capacity ✓ 24V 205Ah Li-Ion battery ✓ Quick charger included ✓ Fully electric & self-propelled ✓ Ideal for large warehouses ✓ Extremely robust and reliable Low lift pallet truck with steel frame for maximum comfort & driver protection Good maneuverability thanks to power steering and compact chassis Excellent working ergonomics - height-adjustable tiller, spring-mounted driver's platform and padded backrest High travel speed and climbing ability Powerful vertical AC drive motor Automatic speed reduction when turning Reliable drive system The electric SCHORR low lift pallet truck has a reliable drive system with a travel speed of 10 km/h and precise control. It impresses with its powerful performance and optimum stability during operation. Long service life The vertical gearbox of the low lift pallet truck is particularly robust and guarantees a long service life. Easy handling The easy-to-operate pedal ensures a high level of driving comfort. The driver has a good view and can lean against the protected steel construction. Guaranteed operational safety The steel safety bars on the pallet truck ensure safe working even at high speeds. The electric pallet truck also has an automatic speed regulation function when steering. Technical data Bsdpfx Afouuhvtemelp Manufacturer (abbreviation): SCHORR Manufacturer's code: RR20SLE ( Lithium battery) Load capacity: 2.0t Model: 240E Tare weight incl. batteries: 765kg Drive: Electric Tires: Polyurethane Basic dimensions Overall length: 2381mm Overall width: 734mm Fork length: 2400mm Length including fork crown: 1234mm Stroke: 125mm Fork dimensions DIN ISO 2331: 55mm x 170mm x 1150mm Fork outer distance: 685mm Aisle width with pallet: 1000x1200 transverse 3017mm Aisle width with pallet: 800x1200 transverse 2874mm Turning radius: 2217mm Speed Travel speed with/without load: 8.5km/h / 10.0km/h Max. Climbing ability with/without load: 6% / 16% *Further technical data available on request. Would you prefer to finance or lease the device? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any further questions you may have about our high-speed products. You can reach us by phone or email. We look forward to hearing from you and assisting you with advice.

Condition: new, Year of construction: 2025, functionality: fully functional, SCHORR Log Splitter HS-22PE PRO – 22 Tons Splitting Force -- 22 t splitting force – effortless splitting of hardwood and large logs -- Heavy-duty construction (340 kg) – robust hydraulics and stable steel frame -- Combination drive: PTO and 400V electric motor – flexible use in the forest or on the farm -- Splitting length up to 110 cm – ideal for long log sections -- Practical log lifter – lifts heavy logs and functions as a safety guard -- Retractable cylinder (1.99 m) – easy to transport and space-saving storage -- 3-point hitch (Cat. I & II) – transport directly on the tractor -- Two-handed operation and safety features – maximum work safety -- Mobile thanks to wheels and transport wheel Performance and Flexibility The HS-22PE impresses with powerful hydraulics and reliable continuous operation. Thanks to PTO and 400V electric motor, you have the choice: mobile operation on the tractor or quiet, emission-free operation on the farm. Comfort and Efficiency -- Log lifter for handling heavy timber – no strenuous manual lifting -- Automatic or manual return for fast or precise working -- Two speeds – rapid approach, powerful splitting Robust Construction With high-strength steel, durable hydraulic components, and stable footing, the HS-22PE is built for tough use. The large transport wheels make moving easy, even on uneven terrain. Technical Data Manufacturer (Short Name): SCHORR -- Model designation: HS-22PE -- Splitting force: 22 tons -- Own weight: 340 kg -- Drive: Electric (400V 5.5 kW, 16A) or PTO (540 rpm) Basic Dimensions Bjdjw Smphepfx Afmolp -- Overall length: 1300 mm -- Overall width: 1450 mm -- Overall height: 2470 mm -- Hydraulic cylinder diameter: 11.5 cm -- Piston rod diameter: 6 cm -- Splitting wedge length: 22 cm -- Max. / Min. splitting diameter: 40 cm / 8 cm -- Distance between wedge & ground: 16 cm Speed -- Cylinder speed PTO: Advance 5.5 s / Return 9.5 s -- Cylinder speed electric motor: Advance 7.5 s / Return 14.5 s Service and Delivery -- Spare parts always in stock -- Delivery or collection in 48465 Schüttorf possible (by appointment only) -- Financing and leasing available on request We are happy to offer you personal advice on the SCHORR HS-22PE PRO.

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone). WEBER CR 9 Hatz Diesel Vibratory Plate Compactor / Brand New / In Stock & Immediately Available Sale price: €11,590.00 net / €13,792.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series stand out for their strong compaction performance and maximum efficiency. They are therefore the first choice for compaction tasks ranging from classic road and civil engineering to paving construction. Balanced operating characteristics, high running smoothness, and low hand-arm vibrations ensure high user comfort. CR 9 - The new premium class: powerful, robust, reliable in operation: - Precise, stepless electro-hydraulic switching between forward and reverse using tap control - Throttle and hydraulic switching enclosed within the guide bar for protection - Low hand-arm vibrations - Fatigue-free operation with the height-adjustable guiding handle - Protection of machine and engine through a protective frame and full engine casing - Reduced maintenance requirements thanks to the self-tensioning centrifugal clutch - Easy service access; all maintenance points are easily reachable - Safe and swift loading with the large, foldable lifting eye - Secure lashing during transport with additional eyelets on the engine console - Enhanced user comfort via electric start with operating hour counter, engine oil, and battery voltage monitoring Blodpfx Afsym I H Romop - Areas of use: road and civil engineering, trenching, landscaping, subbase preparation for paving, compacting of paving stones and consolidation of sand, gravel, or crushed stone Technical specifications Engine: Hatz Diesel Max. engine power: 11.2 (15.3) kW/hp Weight: 736 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm We can also provide financing offers upon request. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Equipment - Mercedes-Benz - Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT product range! Subject to errors and prior sale. = Further information = Condition: New Engine brand: Hatz Please contact Marius Herden for more information.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total length: 7,000 mm, total height: 2,200 mm, total width: 2,350 mm, input voltage: 380 V, overall weight: 1,700 kg, compressed air connection: 6 bar, warranty duration: 12 months, film width: 250 mm, power: 5.2 kW (7.07 HP), product height (max.): 850 mm, product height (min.): 50 mm, product length (min.): 650 mm, EDDA Olympia 150s BN | Automatic "Total Closing" Bubble Wrap & Stretch Wrapping Machine The Olympia 150s BN is a premium, fully automatic horizontal orbital wrapping machine featuring the innovative Total Closing Series technology. Engineered specifically for the furniture, door, panel, and wood-processing industries, it combines Bubble Wrap (Air Bubble Film) and Stretch Film application in a single inline process to provide 360° total protection for high-value or fragile products. Advanced Total Closing & Dual-Layer Protection: Simultaneous Dual Coating: Applies a protective layer of bubble wrap followed immediately by an industrial stretch film layer, ensuring maximum cushioning against impacts and scratches. Complete 360° Sealing: Delivers a fully enclosed, airtight packaging result that safely protects products from dust, moisture, and transport damage. Bledpjy D Nzljfx Afmjp Optimized Material Efficiency: Precise mechanical/electronic tension control guarantees uniform wrapping while reducing film and bubble wrap consumption to the minimum. Premium Automation & High-End Components: Fully Automated Inline Cycle: Equipped with heavy-duty automatic film clamping, cutting, and welding units—completely removing manual operator dependency. Integrated Motorized Conveyors: Features driven inlet and outlet conveyor belts that sync perfectly with your factory line for smooth product transit. Pneumatic Top Press Rollers: Adjustable pneumatic vertical hold-down rollers secure the product firmly during high-speed rotation, preventing shifts. Intuitive PLC Touch Screen: Allows instant setup of wrapping parameters, ring rotation speed, and custom overlap configurations via a user-friendly interface. Industrial Heavy-Duty Build: Engineered with a balanced ring mechanism and rigid frame for exceptionally quiet, low-vibration, continuous 24/7 operations. For exact ring diameter dimensions, layout drawings, customized technical inquiries, or detailed catalog pricing, please send us an inquiry directly through Machineseeker.

Condition: new, Year of construction: 2026, The CORMAK PT265T Planer-Thicknesser is a professional machine designed for intensive and precise machining of solid wood and wood-based materials. The new version features an innovative combined table system that significantly increases work efficiency and eliminates setup errors typical of older designs. With a 2.6 kW motor and a stable construction, the PT265 is a reliable tool for carpenters, craftsmen, and production workshops. Key Advantages New combined table system – constant calibration of the infeed and outfeed tables eliminates errors and improves precision. Stable cast-iron construction – 170 kg machine weight minimizes vibrations and enhances safety. Total motor power S6: 2.6 kW – ensures smooth and efficient processing of hardwoods. Unique Benefit: Feed Rollers in the Thicknesser – specially designed roller extensions integrated into the thicknesser table support long and heavy materials, making feeding and receiving easier while improving surface finish quality. Easy conversion from jointer to thicknesser – quick switching between modes reduces operating time. Three HSS knives – precise cutting and high-quality surface finish. 265 mm working width jointer – large working area allows machining of wide workpieces. Construction and Technology The CORMARK PT265T is a modern wood thicknesser built on a robust, reinforced structure with cast-iron components. The worktables are ground and properly balanced, ensuring repeatability and accuracy. The new table system enables synchronized height adjustment—once set, the table level does not require recalibration when changing the planing thickness. The centrally positioned thicknesser table on a column ensures even material feed without deviation. Rubber feet further reduce vibrations, improving component durability and machining quality. Performance and Precision With a 2.6 kW (S6) motor, the machine delivers high efficiency while maintaining stable operating parameters, even when machining hardwoods. The cutterhead with a 75 mm diameter, equipped with three knives and running at 4000 rpm, ensures a perfectly smooth surface finish. A precise graduated scale allows accurate table height adjustment. The aluminum tilting fence (700 × 150 mm) with an adjustable angle range of 90–45° enables precise jointing at various angles. Standard Equipment Cutterhead with three HSS knives Aluminum fence 700 × 150 mm Graduated handwheel for table height adjustment Cutterhead guard Built-in dust extraction port Ø100 mm Anti-vibration rubber feet Technical Specifications Cutterhead diameter: 75 mm Cutterhead speed: 4000 rpm Dust port diameter: 100 mm Fence tilt angle: 90–45° Number of knives: 3 Cutterhead length: 262 mm Knife dimensions: 250 × 25 × 3 mm Max. jointer width: 265 mm Max. thicknesser width: 265 mm Bedpfx Afoy El R Ejmjlp Max. planing height: 180 mm Max. thicknesser cutting depth: 3 mm Max. jointer cutting depth: 2.5 mm Feed speed (thicknesser): 6 m/min Fence dimensions: 700 × 150 mm Machine dimensions (L × W × H): 1080 × 269 × 1000 mm Weight: 170 kg Total motor power: S6: 2.6 kW Power supply: 400V

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. Bsdpjyv Iqvjfx Afmolp CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: used, This listing is for the Sartorius MSE124S Solent Scales Bedpoyypxpofx Afmelp The unit is in full working condition and is ready for immediate use The Sartorius MSE124S Solent Scale is a dependable laboratory balance designed for accurate and consistent weighing in research, education, and industrial environments. Built with precision engineering, it delivers reliable measurement performance for routine laboratory applications. Its robust construction ensures long-term durability, while the clear digital display allows for easy reading of results. The intuitive interface makes operation straightforward, reducing user error and improving workflow efficiency. Ideal for general laboratory weighing tasks, the MSE1245 Solent Scale provides the accuracy and stability expected from Sartorius equipment, making it a practical and cost-effective solution for everyday use

Condition: new, Year of construction: 2026, overall weight: 2,800 kg, rotor diameter: 350 mm, number of blades: 42, total length: 1,460 mm, total height: 1,800 mm, total width: 1,950 mm, rotor length: 620 mm, rotor width: 350 mm, power: 35 kW (47.59 HP), warranty duration: 12 months, blade width: 50 mm, blade diameter: 50 mm, MIZAR SSH Series - Single Shaft Shredder / Einwellenzerkleinerer for Cables, Plastics & E-Waste Controlled Size Reduction with Intelligent Feeding System The MIZAR SSH Series is engineered for efficient and controlled shredding of a wide range of materials including cables, textiles, plastics, tires, electronic scrap, and various metal types. Designed for reliability, flexibility, and consistent output size, SSH shredders are ideal for recycling facilities requiring uniform material preparation before granulation or further processing. SMART SHREDDING TECHNOLOGY & ADVANTAGES • Single Rotor – Maximum Control: Customized high-alloy wear-resistant steel blades mounted on a robust single shaft ensure aggressive intake and efficient size reduction across mixed material streams. • Programmable Hydraulic Pusher: An intelligent hydraulic feeding system continuously pushes material toward the rotor, optimizing throughput and preventing idle rotation. • Automatic Anti-Jam System: In case of overload or blockage, the rotor automatically reverses direction. This protects the machine and ensures uninterrupted operation. • Screen-Controlled Output Size: A heavy-duty screen located beneath the rotor determines the final particle size. Material remains inside the chamber until it reaches the required dimensions, ensuring a homogeneous output. • Industrial-Grade Components: Siemens/WEG motors, SKF/FAG bearings, and Schneider or ABB electrical systems ensure durability and long service intervals. Fully CE-certified for international compliance. APPLICATION AREAS • Cable Recycling: Copper and aluminum cables, wiring harnesses. • Plastic Materials: HDPE, PET, film, lumps, injection waste. • Electronic Scrap (WEEE): PCBs, electronic components, mixed e-waste. • Textile & Tires: Industrial textile scrap, fabric waste, car and light truck tires (pre-cut). • Metals: Aluminum scrap, radiators, light metal fractions. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration and screen size based on your material) • SSH S1: Compact solution for medium-scale operations. • SSH M1: Balanced performance for diverse recycling needs. • SSH L1: High-capacity industrial model for continuous operation. • SSH XL1: Heavy-duty configuration for the most demanding throughput requirements. Why Mizar SSH? • Precise output size control via interchangeable screens • Stable and intelligent hydraulic feeding system Bljdpeyyun Ajfx Afmjp • Reduced downtime with automatic reverse function • Low maintenance design with accessible rotor chamber • Seamless integration into complete recycling lines Need a tailored shredding solution? Contact us for a customized quotation, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: used, For inquiries regarding the vibratory plate compactor, please contact Mr. Herden (by phone). WEBER CR1-II Hd Honda Petrol Vibratory Plate Compactor / New machine / in stock & immediately available. Sales price: €2,890.00 net / €3,439.10 gross 3-year warranty Shipping available. Weber CR 1 Soil Compactor – The universally applicable entry-level model The reversible soil compactors of the CR series stand out with powerful compaction performance and maximum efficiency. They are therefore the first choice for compaction work ranging from conventional road and civil engineering to paving construction. Balanced operating characteristics, high running smoothness, and low hand-arm vibrations ensure excellent user comfort. Features - Infinitely variable forward and reverse movement - Precise operation thanks to hydraulic directional control - Low maintenance requirements due to self-tensioning centrifugal clutch - Robust tubular protection frame to prevent damage - Large, fixed lifting eye for quick loading, also by forklift Technical data Engine: Honda petrol Max. engine output: 2.6 (3.6) kW/HP Weight: 92 kg Centrifugal force: 15 kN Frequency: 100 Hz Working width: 35 cm Financing offers available upon request. We are official sales and service partners for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telescopic Handlers - JCB Construction Machinery - Mercedes-Benz - Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the entire Weber MT product range! Errors and intermediate sale reserved. Bljdpfjymi H Ssx Afmsp = Further information = New: Yes Engine brand: Honda Contact Marius Herden for further details.

Condition: new, functionality: fully functional, jaw width: 73 mm, jaw height: 35 mm, Precision Vice Brand: Vertex Type: VBST-30 Length: 190 mm, Width: 73 mm, Height: 68 mm Jaw width: 73 mm Clamping range: up to 100 mm Jaw height: 35 mm With pull-down feature Stainless Bjdpfx Afsyml A Aemjlp Hardened to 58–60 HRC Finely ground surface Perpendicularity 0.005/100 mm Supplied in imitation leather case

Condition: new, Year of construction: 2026, ### 🔫 ProfiGun PM-1 powder gun Lightweight, ergonomic, perfectly balanced with a contoured grip. ✋⚖️ Adjust powder output and switch programs directly on the gun. 🎛️ Ceramic cascade up to 100,000 V for efficient charging of all powder types. ⚡ New-generation nozzles improve penetration on complex parts. 🎯🧩 Profiled nut for a secure grip + conductive handle for excellent operator grounding. 🔩🧤 Impact-resistant materials, fully demountable design, replaceable powder path tube. 🛡️🛠️ Patented in the EU and US. Polarity: negative. 🇪🇺🇺🇸➖ One-piece powder path + quick-release hose coupling reduce leaks and speed up hose changes. 🔌✅ ### 💨 ProfiJector powder pump Efficient injector with an optimized feed angle validated by research. 📐🔬 Lower powder and air consumption vs. right-angle injectors, with low running costs. ♻️📉 European patent protected. 🏅 ### 🖥️ PSS controller - 7" touchscreen 7-inch glove-friendly touch panel. 🧤📲 3 auto programs: overcoating, hard-to-reach areas, flat surfaces. 🔁 Fine tuning: 0.1 kV and 0.1 uA resolution. 🎚️ Advanced pneumatic valves for precise air dosing (patent pending) + real airflow measurement to detect drops or blockages. 💨📈⚠️ Diagnostics, program naming, external control via Modbus. 🧠🔧🔌 ### ⚡ ProfiCharge ceramic cascade (made in Poland) Bledpfx Afeyfik Ismop High-precision ceramic cascade up to 100,000 V, manufactured in Poland. 🇵🇱⚡ High-frequency ion emission (up to 17,000/sec) improves charging - less powder to the collector, more on the part. 🎯📉 Ultra-precise current control: 0-100 uA, stable even below 10 uA (0-10 uA focus with 0.1 uA steps). 🎛️ ### 💨 Air and application quality features Electronically controlled needle valves + integrated flowmeters for real-time, precise air delivery. 💨✅ Adjustable electrification curve for different powders and demanding parts. ⚙️🧩 Non-stick, puncture-resistant nozzles resist electrical breakdown, reduce clogging, and simplify color changes. 🧼✨ Automatic gun purge (from handle or screen) for faster, cleaner color changes. 🔁💨 ### 🛡️ Safety and compliance Discharge energy below 2 mJ + antistatic hose with double grounding strap. ⚠️🔒 ATEX and EN 50050-2 compliant for potentially explosive areas. ✅ ### 🧠 Productivity and support Quick Program: fast switching via rapid trigger presses. ⚡🎛️ Visual wear counters + fault history, suggestions, and self-monitoring diagnostics. 👀🔧 Up to 8 languages: PL, EN, DE, FR, RU, ES, IT, SV. 🌍 Animated troubleshooter for guided diagnostics. 🧭 Professional mode (hints on/off) + daily and job statistics for order management. 📊⏱️✅

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DC1500 Cyclone Dust Collector – Professional Dust and Wood Chip Extraction System The CORMAK DC1500 cyclone dust collector is a high-performance extraction system designed for efficient removal of wood chips, sawdust, and fine dust generated during woodworking and industrial production. Featuring a cyclone separator combined with a dual-stage filtration system, the DC1500 effectively separates coarse and fine particles, ensuring cleaner air, improved workplace safety, and extended filter life. It is suitable for both dry and damp materials, making it a versatile solution for demanding workshop environments. Key advantages Dual-stage filtration system – efficiently separates coarse chips and fine dust particles. Cyclone separator – provides highly effective pre-separation of sawdust and debris before filtration. High-performance centrifugal fan – delivers strong suction with quiet operation. Remote control operation – convenient wireless control for improved operator comfort. Compact design – fits easily into workshops with limited floor space. Heavy-duty steel collection container – durable construction for long service life. Blsdpfx Afjvuzvksmop Mobile design – four heavy-duty caster wheels allow easy transport around the workshop. Construction and technology The CORMAK DC1500 is equipped with an advanced cyclone separator and an integrated dust filter, significantly improving filtration efficiency while reducing filter maintenance. High-quality seals in critical areas minimize pressure losses and maximize suction performance. An integrated vacuum pressure gauge allows continuous monitoring of system performance, while the dynamically balanced centrifugal fan ensures reliable, uninterrupted operation. Precision and performance With an extraction capacity of up to 3,200 m³/h, the DC1500 ranks among the most efficient dust collection systems in its class. Its 1.5 kW motor provides powerful suction while maintaining low energy consumption, making it an economical solution for continuous industrial use. Applications The CORMAK DC1500 cyclone dust collector is ideal for: woodworking workshops furniture manufacturing facilities wood, plastic, and metal processing plants central dust extraction systems professional craft and production workshops It efficiently removes both dry and damp sawdust, wood chips, and fine production dust, helping maintain a clean and safe working environment. Standard equipment Remote control Cyclone separator High-efficiency dust filter Heavy-duty steel collection container Mobile base with four caster wheels Vacuum pressure gauge Optional equipment Flexible suction hoses Hose diameter reducers and adapters Additional HEPA filter kits Technical specifications Parameter Value Airflow capacity 3,200 m³/h Maximum vacuum 2,040 Pa Noise level 70 dB Motor speed 2,850 rpm Suction inlet 3 × 100 mm / 1 × 150 mm Collection containers 2 Motor power 1.5 kW / 230 V Overall dimensions 1250 × 650 × 1720 mm Weight 100 kg

Year of construction: 2026, condition: new, functionality: fully functional, Product Description Pneumatico Holder | Wallbox Cable Retractor 1.5–3.0 kg EVP153L30 The EVP holder from Pneumatico is an innovative device equipped with an automatic cable management function that revolutionizes electric vehicle charging. With this holder, tangled and dirty charging cables are a thing of the past. It is the simplest solution for all EV cables up to 22 kW. The holder can be mounted on the wall or ceiling and attached directly to the EV cable – that’s it! It is compatible with all wallbox brands and every cable type, suitable for both new and existing installations. Designed for outdoor use and harsh weather conditions. Fitted with a robust textile cord made from high-tenacity polyethylene fiber. The holder features two operating modes: continuous and ratchet-lock. This product is manufactured in the European Union. Technical Specifications for the EVP Wallbox Holder: Bodsyn Etkjpfx Afmslp Load capacity: 1.5 – 3.0 kg Housing material: Plastic Housing dimensions: 215 x 105 mm Automatic cable retraction Swiveling housing bracket Retractable cord length: 300 cm Holder weight: 2 kg Suitable for indoor and outdoor use For cables with a diameter of 9.5 to 18 mm Purpose of the Pneumatico Retractor EV The Pneumatico Retractor EV is designed to manage electric vehicle charging cables. Its plastic housing provides resistance to challenging weather conditions. The modern design ensures high product aesthetics. The retractor's cord is up to 300 cm long. Installation of the retractor is quick and easy. The suspended cable always remains clean, as do your hands.

Condition: new, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, tool diameter: 60 mm, spindle mount: MK 5, rotational speed (max.): 2,000 rpm, rotational speed (min.): 38 rpm, overall weight: 3,800 kg, Equipment: CE marking, The RD 1600 VARIO radial drilling machine is a professional device for drilling holes in metal, wood, and other materials. Thanks to its high power and robust design, it ensures fast and precise drilling even under the most demanding conditions. The powerful 4.0 kW motor is equipped with a frequency inverter and offers a wide speed range of 38–2000 rpm. The arm, spindle head, and column each feature independent hydraulic clamping. The worktable measures 1740 x 980 mm, and the machine is equipped with automatic spindle feed, a coolant system, and motorized arm height adjustment. Maximum drilling capacity is 60 mm; tapping capacity up to M46. Standard features include stepless speed control with readout on a digital display, high spindle alignment with automatic brake, arm, head, and column all fitted with independent hydraulic clamps, a solid base suitable for machining large workpieces, and a massive, ground column ensuring smooth arm movement. The arm's motorized lifting function allows for series production without changing the spindle position. Control panel buttons allow locking/unlocking the head and column either together or individually. The arm guides are hardened and ground, and the machine's perfect balance ensures ideal feed of the spindle. Ideal for drilling, counterboring, reaming, and tapping. Technical specifications Maximum drilling capacity: 60 mm Maximum tapping capacity: M46 Spindle taper: MT5 Minimum spindle speed: 38 rpm Maximum spindle speed: 2000 rpm Spindle speed change—number of ranges/stepless: Stepless (38–275, 275–2000) Drive method: Gearbox Automatic spindle feed range: (8) 0.06–1.00 mm/rev Min. spindle/column distance: 350 mm Max. spindle/column distance: 1600 mm Spindle/table distance: 165–750 mm Min. spindle/base plate distance: 665 mm Max. spindle/base plate distance: 1250 mm Vertical travel of arm with head: 585 mm Horizontal travel of drilling head: 1250 mm Quill stroke: 325 mm Column diameter: n/a Cube table size: 750 x 500 x 500 mm Base plate working area: 1740 x 980 mm Motor power: 4 kW Bsdpfoytfxksx Afmjlp Voltage: 400 V Dimensions (W x D x H): 2600 x 1100 x 2770 mm Weight approx.: 3800 kg Scope of delivery Cube table MK 5 / B 16 drill chuck Reduction sleeves MK 5/4, MK 4/3, MK 3/2 LED lighting Filled with Shell Tellus 46 oil Coolant system Inverter Digital speed readout Lifting motor Hydraulic motor Guarding Service tools Legally required safety guards Complete operation and maintenance documentation (Polish DTR) CE certificate 24-month full warranty without extra charges

Condition: used, functionality: unexamined, For sale: knife balancer Blsdpfeyutmlsx Afmep Net price: 230 Euro/unit We have 6 units available

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, grinding length: 2,200 mm, grinding width: 500 mm, grinding height: 450 mm, grinding wheel diameter: 400 mm, table speed: 30,000 mm/min, table length: 2,200 mm, table width: 500 mm, grinding wheel width: 100 mm, spindle speed (max.): 4,000 rpm, overall weight: 10,000 kg, rapid traverse X-axis: 30 m/min, warranty duration: 12 months, Precision surface grinding machine, 2200 x 500 mm, workshop-refurbished with a 12-month warranty, available immediately. Includes delivery, commissioning, service, and spare parts, all from a single source. Custom-made by Mägerle with a narrow, semi-enclosed cabin for a Swiss customer. Magnetic table 2200 x 500 mm CNC control system Sinumerik 840 D Grinding wheel drive 25 kW Grinding wheel diameter x width = 400 x 100 mm Peripheral speed 45 m/sec (can also be retrofitted for CBN up to 8,000 rpm upon request) Feed rate range (X / Y / Z) 30 / 3 / 3 mm/min Smallest increment 0.001 mm Balancing device Dittel MBA 5000 Total power requirement 82 kVA Machine weight approx. 12 t Bsdpozbyp Tofx Afmolp Space requirement approx. 6.00 x 3.00 x 2.80 m

Year of construction: 2023, condition: ready for operation (used), travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, overall weight: 5,500 kg, total width: 2,840 mm, total height: 2,700 mm, product length (max.): 5,440 mm, table length: 1,000 mm, table width: 500 mm, number of axes: 3, This 3-axis KNUTH HFS 50100 F NC was manufactured in 2023. It features a magnetic table measuring 1000 mm x 500 mm and a powerful total power of 14 kW. The machine includes a coolant system with a paper belt filter and magnetic separator, along with essential accessories such as grinding wheel flanges and precision vises. If you are looking to get high-quality surface grinding capabilities, consider the KNUTH HFS 50100 F NC machine we have for sale. Contact us for further details. Bedpfx Afjz D Tb Rsmjlp - Control: Siemens Smart Line Touch- Magnetic table: 1000 mm x 500 mm- Total Power: 14 kW- Voltage: 400 V- Frequency: 50/60 Hz- Grinding wheel size: D350 x 40 mm- Coolant System: Coolant system with paper belt filter and magnetic separator- Included Accessories: 2x grinding wheel flanges, grinding wheel dresser, balancing stand with balancing shaft, 1x Röhm precision vise (PL-120S), 2x Röhm precision vise (PL-70S), hydraulic oil (approx. 80 L in canister)- Documentation: Complete machine documentation and service reports available

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Bjdsz Ad Dcjpfx Afmolp Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Year of construction: 2023, condition: used, This listing is for a 2023 Thermo Scientific TSCM17PV Controlled-Rate Freezer The unit is in full working condition and ready for immediate use This controlled-rate freezer is a high-quality lab instrument manufactured by Thermo Scientific (Model: TSCM17PV). This 17L system is designed for precise, repeatable cryopreservation of biological samples, ensuring optimal cell viability through controlled cooling rates. It features an integrated thermal printer for data traceability and is suitable for GMP-compliant environments. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. specifications_en: Capacity: 17 L; Voltage: 220-230V; Frequency: 50/60 Hz; Amperage: 5.5A; Phase: 1; Includes integrated thermal printer. Blsdpo Advduofx Afmsp

Condition: good (used), Year of construction: 2016, operating hours: 17,000 h, functionality: fully functional, FOR SALE 5-Axis Machining Center – DMG MORI DMU 95 monoBLOCK® YEAR 2016 Description: Selling a DMG MORI vertical 5-axis simultaneous machining center (Deckel Maho Pfronten GmbH), year 2015. A versatile, highly rigid, and well-equipped professional machine. Suitable for complex and high-precision machining operations. Can be viewed powered on and in operation on site. Main Features: • Numerical Control: HEIDENHAIN TNC 640 (ERGOline® interface) • Spindle speed max: 20,000 rpm • Hour counters: Power on: 48,878 h | Actual machining: 17,030 h • Machine weight: ~14,000 kg (14 tons) Capabilities & Machining Envelope: • Travels: X = 950 mm | Y = 850 mm | Z = 650 mm • Max. workpiece dimensions: Ø 1,040 mm x Height 590 mm • Tilting rotary table: Ø 850 x 750 mm (Max. load 1,000 kg) • Tool magazine: 60 positions Equipment & Included Options: • HEIDENHAIN TS 649 infrared workpiece probe • BLUM laser tool measurement system • quickSET 3D geometric control kit Blods Af Aiajpfx Afmop • Remote electronic handwheel • Nozzle ring for coolant around the spindle • Safe operating mode: Mode 4 • Automatic chip conveyor & Original transformer • 3D STEP digital model of the machine included (for simulation/CAM) Conditions: • Removal, lifting, and transport are the sole responsibility of the buyer. PRICE €173,000