Used Dispenser for sale (561)

Condition: good (used), Year of construction: 2010, total length: 1,600 mm, total width: 1,900 mm, total height: 3,200 mm, overall weight: 600 kg, For Sale: Chjdpfx Apjzv S Nms Dod Dosing unit / flour discharge point from Kaak / Silowacht Brand: Kaak / Silowacht Type: flour discharge point Year of construction: 2010 The height is adjustable, the total height is approximately 3.20 meters. The flour discharge point can be mounted on a pole / column. Diameter of the lower filling point: 99 cm Maximum weight of flour: 100 KG Included: - weighing hopper for flour / meal - load cells - water weighing hopper unit - filter unit - pneumatic valves - level gauges - liquid yeast meter, valve and connection - Siemens S7-1500 (Siemens control system) - piping, if required It is possible to inspect this machine on-site. If you have any questions or comments, please feel free to contact us.

Condition: good (used), Year of construction: 2016, For Sale: Füll Systembau Stainless Steel Dosing Machine Brand: Füll Systembau Type: VX5 Dispenser Enzyme Mixing Unit Year of construction: 2016 Overall dimensions Height: 1300 Overall dimensions Length: 1650 Overall dimensions Width: 920 It is possible to view this dosing unit at our location. If you have any questions or comments, please do not hesitate to contact us. Chedpfoz Epxhox Ap Djd

Year of construction: 2018, condition: good (used), Bagging line consisting of Incline Conveyor with Flights and product speed control Weigher 4 Dispensing Buckets PLC Controller for complete system Chedeinbhtjpfx Ap Ded In good working order

Condition: used, This listing is for a Thermo Scientific Multidrop Combi Type 836 Microplate Dispenser. The unit is in full working condition and ready for immediate use. This bulk reagent dispenser delivers precise, high-speed fluid handling across various microplate formats. Ideal for high-throughput screening, it features an easy-to-use interface and ensures low dead volume to save valuable reagents. Transparency Report and Technical Audit: Chodpjzgdf Isfx Ap Djd Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: good (used), Year of construction: 2014, Approx. 11 units of compact label dispensers for applying pre-printed labels, Weber, Alpha Compact – used: Price per unit, ex-works: now only €950.00 instead of €2,950.00 (net)! Chsdpez Sdq Ujfx Ap Ded Manufacturer: Weber Type: Alpha Compact Year of manufacture: 2014 Includes stand and applicator 100 – 240VAC Condition: good Available: from approx. Q4/2026 Location: Warehouse Frankenberg / Saxony

Condition: used, Year of construction: 1995, incl. dispenser Working direction: left-right Number available (price per tank): 1 Capsule type: champagne cap applicator, champagne cap folding capacity / hour ca.: 4000 working direction: rotating turret, left-right Csdpj Ahlffsfx Ap Djhd Working type: fullautomatic amount of capping heads: 4

Condition: excellent (used), Manufacturer: MORETTO S.P.A. -type: Hopper Loader; Serial.: 1302868; Model: F3F40 Chjdpfot H Ndpsx Ap Dsd -electrical data: 230V; 50/60Hz; 1kW -capacity: 50dm3/h -weight: 11 kg

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. Chsdpfx Ajgq N Ezop Ded JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality

Condition: excellent (used), Nordson Hot Melt Heated Hoses 4 qty 8 ft long heated hoses Chedpfjwuqfyex Ap Dsd Complete with air solenoids, modules, cord sets & dispensing guns Mounting brackets included In excellent working condition

Year of construction: 2018, condition: excellent (used), Ferroplan LP14FELT Pallet dispenser Chedpfxswtipne Ap Djd 2018, pallet dispenser, capacity 15 pallets, pallet size 1200mm x 1000mm, 500Kgs, 1Ph

Year of construction: 2019, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 19/018, Dosing and bagging scale for solids and powders: Chjdpfxjz Ehm Rj Ap Ded Dosing machine for solid and powdered products (from 5 to 1,000 grams of coffee). The product, stored in the buffer hopper, is automatically dosed by a two-speed vibrating channel into a weighing basket. The operator can control the dispensing of the dosed product into the container to be filled. It is possible to prioritize either dosing speed or weighing accuracy. The machine is supplied with various funnels of different diameters for powders or solids.

Condition: used, DÜRR DÜRR testing station for adhesive applicators DÜRR testing station for adhesive applicators, including (5 robot-controlled adhesive applicators) DÜRR testing station (DÜRR in-house design) for the automotive industry Weight: 1200 kg Type: DÜRR testing station for adhesive applicators Cedpfx Apoz Nflyo Djhd Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data; information provided is without guarantee!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2018, Label dispenser Macro SP12 right side RA1956 Manufacturer: Schwinn Model: Macro SP 12 Year of manufacture: 2018 Alignment: right Label passage: up to 115 mm Label speed: 1-18 m/min Maximum diameter label roll: 300 mm Core diameter 40 mm expandable with adapter Power supply: Euro plug 230/50Hz Integrated control with control parameters, controllable inputs and outputs, fault messages,... Additional equipment: Start triggering external AP 010-500 Vacuum Applicator Module Maintenance - equipment - combination Core adapter AP 031 Prewarning - label supply Mounting frame Cjdpek Abm Aefx Ap Dshd Control box Warning light, 3-stage

Condition: used, Year of construction: 2023, SUNHUB – Compact Dispenser Year of manufacture: 10/2023 Condition: good condition, as is, operational Equipment: HEAD SunHub -20-NH-UV-20-N.00 DOSING VALVES BP2 5-N-50 – INK PUMP 2.5 kg SCALE ICS06s-6M/f METTLER TOLEDO LABEL PRINTER + CODEBAR SCANNER Cjdpozf H Rdsfx Ap Dshd External Pump 25 kg CONNECTION X-RITE

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: TE6110019, Semi-automatic tamper-evident label dispenser for applying tamper-evident labels diagonally to folding cartons with tuck-in flaps. Codpfx Aszqfu Esp Dohd

Condition: used, Scheugenpflug DOS P016 Piston Dispenser DOS P Piston Dispensing System for a wide range of requirements The piston dispensing systems from Scheugenpflug operate according to the principle of volumetric dispensing, meaning the dispensed amount of material is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material via a corresponding material feed system. When a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dispensing pistons push the two components in separate channels simultaneously towards the outlet valve, where they first mix into a homogeneous reactive medium in the static mixing tube. The DOS P016 / TCA piston dispensing systems are highly precise volumetric dispensing systems designed for processing 1K and 2K materials and cover a wide range of requirements. Precisely dimensioned dispensing cylinders enable the application of reproducible material volumes. In the case of 2K materials, the parallel emptying of both cylinders into the common mixing tube creates a consistently constant mixing ratio, ensuring maximum process reliability. At the same time, pressure-, moisture- or shear-sensitive potting media can also be processed gently without any changes to the material being feared. Users also benefit from simple and quick maintenance, long service life and considerably reduced maintenance costs. With optional features such as valve monitoring, mixing tube heating or dispensing head heating, these systems can be flexibly adapted to the respective task. Your advantages No dependence of dispensing accuracy on temperature, pressure or viscosity Consistently constant mixing ratio at all times due to parallel emptying of the dispensing cylinders Wide range of applications (material and application-related) Important functions Simultaneous actuation of the cylinders by a common stroke mechanism enables a homogeneous mixing ratio Sensory monitoring of the inlet and outlet valves as well as the cylinder filling Temperature control of the material by mixing tube heating (optional) Dispensing needle monitoring with camera (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to highly viscous Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure and viscosity of the casting resin Precisely reproducible and highly accurate results Maximum process reliability Application Filling potting, sealing, bonding, application of thermally conductive materials, encapsulation (glob top) DOS P016 Max. volume/shot 2K at ratio 1:1 1K: 0.06/17 ml 2K: 0.1/32 ml Dispensing speed max. 1 [ml/s]: 2 Dispensing accuracy at max. stroke [%]: < 0.5 Heatable up to max. 2 [°C]: 80 Outlets: 1K: 1-4, 6, 8 2K: 1-4 Weight: 14 kg Chjdpfx Apjzc Nple Ded Dimensions (W x H x D) 290 x 350 x 230 mm Video on the mode of operation "Everything from one source: We will gladly offer you suitable financing for your project." You can find more dispensers - new and used - in our shop! International shipping costs on request!

Condition: used, Bluhm Legi-Air 4050 RH Label Printing and Dispensing System Bluhm Legi-Air 4050 RH label printing and dispensing system with Zebra ZE500-4 print module The Bluhm Systeme RH Legi-Air 4050 is a powerful labeling machine with an integrated thermal transfer printer, ideally suited for automatic product labeling in production and logistics processes. The unit is equipped with a print module, applicator, control unit, and numerous interfaces, enabling precise and reliable label application. Motor-driven large roll unwinder Label rolls with a roll diameter of up to 430 mm and 900 meters of label material ensure long, uninterrupted production runs. A tandem operation ensures continuous production. Dispensing head Quickly interchangeable dispensing heads allow for the processing of label sizes from small identification labels to DIN A5-sized EAN128 shipping labels. The Quick-Change option enables format changes in seconds. Spring-mounted dispensing heads compensate for unevenness on product surfaces, ensuring that labels are applied cleanly. Control system Bluhm Weber standard controller Zebra ZE500-4 print module label printer Ideal for print and application labeling applications for products, cartons, outer packaging, and pallets in these areas: • Manufacturing and warehousing • Automotive industry • Pharmaceutical industry • Food and beverage production • Healthcare and beauty industry Standard features • Printing methods: thermal transfer or thermal direct • Orientation: right or left • All-metal industrial design • 16 MB SDRAM, 64 MB flash memory • Applicator interface • Transmissive and reflective media sensors • Multi-level Element Energy Equalizer™ (E3™) for high print quality • Real-time clock • Rotatable display • ZPL II™ – universal language for Zebra printers Media characteristics Codeibh Tkjpfx Ap Dohd Labels Media thickness (label and liner) • ZE500-4: 0.135 mm to 0.254 mm Media types • Continuous, die-cut, or with a reflective mark Ribbons Maximum roll size • 101.6 mm outer diameter with a 25.4 mm core inner diameter Standard length • 600 m capacity Connectivity • Parallel interface: Centronics® compatible • Serial interface: RS-232 • USB 2.0 • Internal ZebraNet™ 10/100 • Applicator interface with DB-15F connector • Optional ZebraNet b/g print server Fonts/Graphics/Symbologies Fonts and character sets • Zebra Global Printing Solution including Unicode™ • Swiss 721 font standard • Bitmap fonts A to H and GS symbols can be expanded tenfold, regardless of height and width • Infinitely scalable Font Ø (CG Triumvirate™ Bold Condensed) can be expanded point by point, regardless of height and width • International character set IBM® code page 850 • With UFST® from Agfa Monotype Corporation • Firmware support for downloadable TrueType™ fonts • Additional fonts available Graphic features • Supports custom fonts and graphics, including custom logos and barcode symbologies • Supports all standard 1D and 2D barcodes Barcode symbologies • Supports all standard 1D and 2D barcodes Technical data Maximum print width • 104 mm Media specifications • Width of labels and liners: 16 mm to 114 mm • Minimum length with rewind: 13 mm • Minimum length without rewind: 6.5 mm • Minimum length in stream mode: 6.5 mm • Maximum length: 990

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Vemag SK4675 Dispenser Manufacturer: VEMAG Maschinenbau GmbH Model: SK4675 Serial number: SK467500000 Chedpfx Asw N Hl Rop Djd Year of manufacture: 2009 Power supply: 3-phase, 50/60 Hz, 400–460 V, 1.5 A Power: 0.5 kW Working air pressure: 6 bar Air consumption: 10 l/min SCCR (Short Circuit Current Rating): 5 kA rms Electrical schematic: SK4675890002 Dimensions: 1000x900x2100mm The Vemag SK4675 dispenser is a professional industrial device designed for precise dosing of food or technical products. It features a robust stainless steel construction, high work efficiency, and reliability. Powered by three-phase supply, it operates over a wide range of voltages and frequencies, making it suitable for use in various industrial environments.

Condition: like new (used), Year of construction: 2019, HERMA 725 D self-adhesive label applicator, C/D-Wrap – wrap-around design This label applicator, with a capacity of approximately 60 units/minute, is designed for labeling products and folding cartons with C-Wrap and D-Wrap labels. The performance range of the machine includes: Chedpfx Aps Ah H Anj Djd Label carrier tape width: max. 160 mm Label roll diameter: 400 mm Tape width: 235 mm Includes HERMA 400 label dispenser Like new The machine is equipped with an Allen hot foil coder. Manufacturer: Herma Year of manufacture: 2019 Space requirement: 190 x 90 x 180 cm

Condition: used, DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system: The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 adhesive control unit DÜRR (110017040) 1 single drum pump (110014004) Weight: approx. 300 kg Cedpfxjzgckce Ap Djhd Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Turbo D252P Dispenser/Dosing Machine with 2 Cups Brand: Turbo Model: D252P Year of manufacture: 2014 Dimensions: 650 × 950 × 1350 mm Included equipment: Various accessories and spare parts Machine mounted on and supplied with 3 transport trolleys Csdpfjycl E Nsx Ap Dshd The Turbo D252P stainless steel dosing machine with two dispensing cups is a versatile device designed for precise filling and portioning of liquid or semi-liquid products in an industrial environment. The two dosing cups allow simultaneous handling of more portions, increasing production efficiency. The machine comes with additional accessories and practical transport trolleys, making relocation and workplace organization within the facility easier.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Tool24 PickOne Goods dispensing system with an innovative drum system to ensure secure individual retrieval of each item. Very fast goods retrieval due to short access times, a self-opening compartment, and an optical signal at the correct retrieval compartment. The drum of the Tool24 PickOne is available with up to 4 different compartment sizes as a standard configuration and, with a load-bearing capacity of over 1000 kg, is specifically designed for industrial use. Flexible mounting of a touchscreen thanks to perforated panels installed on both sides. Cjdpfozuwvcjx Ap Dehd The master system can be expanded as needed with additional expansion systems and combined with all Tool24 hardware variants. The Tool24 PickOne – master system is a state-of-the-art goods dispensing system that was specifically developed for industrial use. It combines the functions of a tool magazine with the security and efficiency of an automated tool cabinet.

Condition: used, Rieber WE-H Dish Rack For warming, stacking, and transporting various types of dishes in the catering, hotel, and food service industries. Modular rack made of stainless steel, with a maximum load capacity of 150 kg, and a multifunctional grid platform for different dish sizes, ensuring tilt and tip-over safety. Spring force is adjustable. Rust-resistant roller system according to DIN 18867, Part 8, wheel diameter 125 mm, 2 swivel casters, 2 swivel casters with brakes. Shaft dimensions: 590 x 290 mm Thermostat control from +30 °C to +110 °C. Rated voltage 1N AC 230V 50 Hz Chsdpfexqzrtox Ap Djd Weight: 55 kg Manufacturer's price: €3,013.00 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2009, Seeding station with discharge system, BmTEC, 2-row configuration Year of manufacture: 2009 Condition: refurbished Working width: 300 mm Infeed height: 820 mm Humidification belt with integrated water bath for humidifying the underside of the dough Immersion depth adjustable Tilting belt with adjustable tilting height for reliable turning of the dough pieces Sprinkling from above with adjustable sprinkling quantity Adjustable pressure roller for fixing the sprinkled material Automatic seed return Includes 2 spreading containers All belt speeds are adjustable Fast and slow discharge possible Automatic sheet feed Max. discharge length: 800 mm Csdpfjz A Sgcox Ap Djhd External dimensions (L x W x H): 330 x 130 x 220 cm

Year of construction: 2022, operating hours: 7,200 h, condition: used, functionality: fully functional, machine/vehicle number: 3352, RAMPF dispensing system with MS-S mixing system (static) Material used: Rampf RAKU PUR 21-2080-1, Component A and Component B The dispensing head has been expanded with a Y-shaped slider. - Manual adjustment mechanism for the mixing system - RAMPF mixing system MS-S (static) Codpfxo Ahp A Re Ap Dohd - Pressure monitoring for Comp. A + B - Material pressure tank 50 l for Comp. A - Level monitoring for Component A + B - Material recirculation to the dispensing pump for Comp. A and B - Material evacuation for Comp. A - Vacuum pump 25 m³/h - Waste container 60 l with pipe -> The collection trays have been replaced with mobile containers. - Trolley for waste or rinsing container - Container frame/machine frame, 3-part - Workbench approx. 1,400 mm x 500 mm with table top - Transfer station for lid drum, Component A - Transfer station for bung drum, Component B - Dispensing control system (Siemens PLC control based on S7-300) - Precision piston dispensing pump for Comp. A and B - EKDP A, Component, 257 ccm - EKDP B, Component, 64 ccm --> 1 x spare EKDP A and EKDP B are included. These have been reconditioned by Rampf as an exchange part. (see image)