Used Precision Balance for sale (7,816)

Condition: used, This listing is for a Vibra HTR-220E Balance Dwsdpexzg Tkjfx Aaxsb

Condition: excellent (used), functionality: fully functional, from an EDM (electrical discharge machining) machine Travel in X: 220 mm Travel in Y: 160 mm Mitutoyo 2-axis digital readout with a display accuracy of 1/1000 mm . Base without evaluation . Dwedpfx Aoznh E Isaxob

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Djdezmyviepfx Aaxewb Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: good (used), functionality: fully functional, Technical data: Centre height 110 mm Centre width 160 mm Spindle bore 23 mm Motor power 1.7 kW Dwjdpfoznc Tyex Aaxjb Speed can be set via potentiometer from approx. 100 - 2,300 rpm 3 pre-selected speeds or 3 switching levels . Scope of delivery, machine with: Operating modes: Manual + automatic Pneumatic clamping device Tilt tailstock with 2 sleeves for K 12 collets, with control switch for switching Hand lever cross support with 4 stops, consisting of cross and longitudinal support .

Condition: good (used), Year of construction: 2010, SCHENCK RoTec HM30BU Horizontal Hard-Bearing Balancing Machine with Belt Drive Manufacturer: SCHENCK RoTec GmbH Model / Type: HM30BU Year: 2010 Maximum rotor weight: up to 700 kg Maximum rotor diameter: approx. 1,260 mm Maximum bearing center distance: approx. 1,330 mm Bearing journal diameter: approx. 9-140 mm Dwjdpfszw E Thjx Aaxsb

Condition: excellent (used), functionality: fully functional, 1 x Tailstock lathe Precision engineering PM 1-FZ Equipment: - Hand lever cross slide with Tripan quick-change system - Electric tailstock for drilling and threading - Collet chuck with draw-in collets Dwodpfxjzl Dr Ee Aaxsb Technical data: - Spindle bore: 23 mm - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Distance between centers: 160 mm - Maximum diameter over bed: 220 mm Accessories: 20 x Draw-in collets 359 E K 23 (1 - 20 mm/ 1 mm increment) 1 x Draw-in collet in tailstock 319 E K 12 1 x Tripan tool holder with 1 cassette Operating manual (copy) Additional accessories, such as collets, are available at an extra charge. The machine can be inspected while powered on.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, 1 x Backturning lathe Precision engineering PM 1-FZ Year of manufacture: 1995 In very good condition with a comprehensive range of accessories. Equipment: Dwedpfxoqyfpmj Aaxjb - Hand lever cross slide with Tripan quick-change system - Electric tailstock for drilling and threading - Collet chuck with draw-in collets - Coolant system Technical data: - Spindle bore: 23 mm - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Distance between centers: 160 mm - Largest turning diameter over bed: 220 mm Accessories: 39 x draw-in collets 359 E K 23 (1 - 20 mm, 0.5 mm increments) + 5 x square collets 10 x draw-in collets in tailstock 319 E K 12 (1 - 10 mm, 1 mm increments) 1 x Tripan quick-change tool holder with 1 cassette 1 x spindle in tailstock with MK 2 taper 1 x MK 2 drill chuck Röhm 1 - 10 mm 1 x simple clamping tool holder Operating manual (copy) Photos of the accessories will follow. Further accessories, such as collets with intermediate sleeves, are also available in stock. The machine can be inspected while powered on.

Condition: excellent (used), Year of construction: 2013, WEILER Praktikant GS – Precision lathe For sale is a used WEILER Praktikant GS precision lathe. Technical data: • Manufacturer: WEILER • Type: Praktikant GS • Machine number: ID03 • Year of manufacture: 2013 • Operating voltage: 400 V • Control voltage: AC 230 V • Connected load: 5.5 kW • Rated current: 7 A • Frequency: 50 Hz • Main fuse: 25 A • Design: 1 • Machine weight: approx. 710 kg The machine is ideally suited for use in workshops, training companies, and for the precise production of individual parts and small series. It is being sold as a used machine. Inspection and functional testing are possible by arrangement. Dwodpfszl D Umsx Aaxeb

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter 270 mm Maximum diameter above the cross slide 160 mm Center height above the cross slide 83 mm Maximum diameter above the machine bed 430 mm Turning length (depending on equipment) 630 mm Headstock: Standardized spindle nose, for the use of various chucks and mandrels with adapter accessories. Accessories for SCHAUBLIN chucks B45/F66 Maximum bar capacity, dia. 36 mm/60 mm Automatic chuck, standard dia. 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle 15/18.5 kW Maximum torque at 100% / 50% duty cycle 135/165 Nm Maximum spindle speed 4000 min-1 Spindle positioning, increment 0.1° C-axis: Programmable increment 0.001° Spindle lock 80 Nm Pneumatic clamping cylinder 3400 daN Cross slide: Transverse travel, X-axis 230 mm Resolution along the radius 0.0005 mm Drive by AC motor, rated torque 3 Nm Ball screw, X-axis pitch 32 x 5 mm Longitudinal travel, Z-axis 720 mm Resolution 0.001 mm Drive by AC motor, rated torque 6 Nm Ball screw, pitch 32 x 10 mm Feeds: Working feeds, X/Z axes, stepless 0-5000 mm/min Rapid traverse rates, X/Z axes 8/10 m/min Feed force, X/Z axes 420/670 daN Turret system: Dwsdszb U Epepfx Aaxeb Number of tool stations 12 Number of rotating tool stations 6 Drive by AC motor, intermittent duty power 3.7 kW Maximum intermittent torque 36 Nm Maximum drive speed 5000 min-1 Standardized tool holder 0VDI 30 Maximum cross-section of cutting tools 20 x 20 mm Integrated coolant system Indexing in both directions of rotation Coolant system: Tank capacity 120 liters Pump flow rate 10 l/min Pressure 5 bars Inventory 2230043 including: 1 Fanuc 18i control unit 1 A2-6 headstock 1 VDI 30 turret with 12 positions for 6 rotating tools 1 pneumatically operated steady rest 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 1x3 jaw chuck 1 Brucker CM5 rotating center 1 ESX-25 radial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00552 1 ESX-25 axial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00550 1 KENNAMETAL ESX-25 dito, without collet EX 1 EWS ESX-25 dito, without collet EX 4 radial tool holders, short, left-hand, Form B2 ref 4100.0100 1 ESX-25 tool holder, Form E3 with EX25 collet and Ø 5 mm collet 1 dito without EX25 collet 3 threading collets Ø 4.5 – 6 and 8 mm 1 tool holder for indexable insert drills, bore Ø 40 mm, Form E1 ref 4100.00124 1 dito bore Ø 32 mm ref 4100.00107 1 dito bore Ø 20 mm ref 4100.00105 1 boring bar tool holder, bore Ø 8 mm, Form E2 ref 4100.00108 1 dito Ø 10 ref 4100.0109 1 dito Ø 12 ref 4100.0110 2 dito Ø 16 ref 4100.0111 1 dito Ø 20 ref 4100.0112 1 dito Ø 25 ref 4100.0113 1 dito Ø 32 ref 4100.0115 1 dito Ø 32 GARANT, long 5 steel protection plugs, Form Z2 ref 4100.00130 1 axial tool holder, left-hand, force C4 ref 4100.00103 1 CM 5 pneumatically operated steady rest ref 180-65.200 1 separate support for microscope ref 180-60.005 1 coolant system OPTION 1 3-jaw hinged center for Ø 30 – 120 mm ref 180-70.200 CHF 2'500.-- + VAT Unless otherwise stated, the technical data is provided without guarantee.

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 205-043-095, TTB TGC 64 F – 2007 | High-Precision CNC Tool Grinding Machine Fully overhauled by the manufacturer TTB Engineering SA and from a single owner. For sale: TTB TGC 64 F, year 2007, a high-precision CNC tool grinding center designed for the production and regrinding of cutting tools in carbide, HSS and other materials. The TGC series (Tool Grinding Center) is a well-established platform developed for the manufacturing of high-precision tools with micrometric accuracy. Equipped with a reliable Fanuc control system, this machine offers excellent performance, repeatability, and long-term stability. With its 5/6-axis configuration, the TGC enables the production of complex tool geometries and ensures maximum flexibility for a wide range of applications, including drills, end mills, and special tools. TTB machines are known for their exceptional thermal and mechanical stability, allowing continuous production over long periods with minimal operator intervention and consistent micron-level precision. Key features: CNC tool grinding center (5 or 6 axes) Fanuc control system Suitable for carbide, HSS, and special materials High precision and repeatability (micron range) Dwsdpfx Aoy D Sb Ijaxsb Ideal for production and re-sharpening of cutting tools Robust Swiss-built machine with high reliability The TGC model is the predecessor of the Evolution series and remains a proven and reliable solution in tool manufacturing environments.

Condition: good (used), functionality: fully functional, Center height 110 mm Center width 160 mm Spindle bore 23 mm 3 speeds for clockwise rotation and Djdpfszl Ew Nex Aaxswb 3 speeds for anti-clockwise rotation

Condition: excellent (used), I am offering for sale a high-quality RÖHM KFD-HS 200/3 hydraulic lathe chuck, designed for professional CNC lathes. The chuck is in very good technical and visual condition. It looks practically new and appears to have been used only a few times. The working surfaces and guides show only minimal signs of use. The set includes: * RÖHM KFD-HS 200/3 lathe chuck, * 3 standard jaws, * 3 RÖHM 538-55 top jaws, * operating wrench, * sturdy wooden transport box (I am not sure if this is the original box for this chuck). Technical data: * Manufacturer: RÖHM * Model: KFD-HS 200/3 * Diameter: 200 mm * Type: hydraulic 3-jaw lathe chuck Dwodpfxezlaqke Aaxsb * Maximum clamping force per jaw (Fmax): 48 kN * Total clamping force (Fges): 110 kN * Maximum rotational speed: 6500 rpm * Identification number: 155099 * Top jaws: RÖHM 538-55 * Country of manufacture: Germany The chuck is ideal for professional applications in machining and working on CNC lathes. It is a robust piece of equipment from the renowned German company RÖHM, which is valued for its high quality and precision.

Condition: used, Year of construction: 2001, functionality: unexamined, load capacity: 600 kg, Dalmec MXF Ceiling Balancer-Manipulator Manufacturer: Dalmec lifting systems Model: Dalmec MXF Manufactured: 2001 Lift capacity: 600 Kg Dwsdpfx Aajv Diidexob Pressure: 0.90 MPa

Condition: excellent (used), functionality: fully functional, The ULMA Taurus 570 traysealer is a high-performance packaging machine specially designed to meet the needs of manufacturers seeking to improve efficiency. Its ability to handle large packs, up to 510 mm, ensures fast, accurate packaging. What's more, its compact design makes it easy to integrate into existing production lines, optimizing space and workflow. In addition, this machine stands out for its sturdiness and reliability. In fact, it guarantees a perfect seal, ensuring product protection throughout the entire process. With this tray sealer, you can also reduce manual intervention, speeding up production while maintaining high quality standards. What's more, the machine's smooth, intuitive operation makes it easy for operators to get to grips with it, boosting productivity. Dwedpfx Aasu Nwyxoxeb In short, the ULMA Taurus 570 tray sealer combines efficiency, reliability and adaptability, offering a complete solution for demanding packaging lines while guaranteeing consistent, high-quality results. Technical specifications: Type: Taurus 570 Max. size. 510 mm Dimensions: 4700 x 1100 mm (L x W)

Condition: excellent (used), functionality: fully functional, The MATRIX compact pneumatic sealer is designed to improve the efficiency of packaging processes in production plants. Thanks to its innovative design, it enables rapid packaging of single products or batches, while ensuring simple handling. The operator places the film on the unwinder, adjusts the worktable, and manually inserts the product into the film, before transferring the assembly to the sealing frame. What's more, the frame's pneumatic descent ensures precise, even sealing, guaranteeing a flawless finish on every cycle. What's more, the MATRIX sealer is equipped with a height-adjustable conveyor, making it adaptable to a variety of product types. With its electronic control system, it offers optimum control of the welding process, avoiding common errors associated with incorrect temperature or pressure. What's more, its automatic ejection conveyor optimizes work flow by rapidly directing products to the shrink tunnel. In short, the MATRIX pneumatic sealer is the perfect choice for companies looking to boost productivity while improving packaging quality. TECHNICAL SPECIFICATIONS : Model: MATRIX Power rating: 10 kW Weight: 340 Kg Maximum product height: 180mm. Dwodpju Nv Eysfx Aaxjb Height-adjustable sealing conveyor. Pneumatic lowering of sealing frame. Push-button or pedal control, or cyclic operation. 7.6 m/min fixed-speed ejection conveyor. Metal mesh tunnel conveyor with variable speed from 3 to 10 m/min. Impulse welding controlled by electronic regulator. Welding blade in high position. Tunnel temperature controlled by electronic thermoregulator.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, The MECA S4000 traysealer is an automatic packaging machine designed to ensure hermetic tray closure. Thanks to its high-performance sealing system, it effectively protects food products from air, moisture, and contaminants, while extending their shelf life. Indeed, this machine helps maintain food freshness and quality, making it an ideal choice for companies looking to improve their packaging processes. Dodpou Nv Nrefx Aaxswb Furthermore, the MECA S4000 traysealer is designed for easy integration into various production lines. Furthermore, its versatility and quick tool changeover allow it to adapt to several tray formats, thus optimizing productivity. Furthermore, its ergonomic design and ease of use make it accessible to everyone, even less experienced operators. With easy maintenance and complete cleanability, this machine ensures high hygiene standards. In summary, the MECA S4000 is a robust and efficient solution for companies looking to improve their packaging processes while ensuring optimal product preservation. Technical specifications: Manufacturer: MECAPLASTIC Type: S4000 Year of manufacture: 2010 Speed (cycles/min): up to 6 Automatic Used machine. Pros: Sealing machine, easy to use. Quick tool change. Ergonomic operation. Complete cleanability. p3dpF1Eu

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 300 kg, total width: 1,260 mm, total length: 1,500 mm, Universal dynamic balancing machine for rotors from 3 - 300kg. CAB803 measuring system, class C protection, CE mark Dwjdpfxsu Nmppj Aaxjb

Condition: excellent (used), Year of construction: 2014, workpiece weight (max.): 16 kg, input voltage: 230 V, year of last overhaul: 2025, SCHENCK TBsonio High Speed Balancing machine for turbocharger core assemblies Dsdpfx Aasq Nin Uoxowb

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 30 kg, input voltage: 400 V, rotor diameter: 600 mm, year of last overhaul: 2023, power: 1.1 kW (1.50 HP), Balancing machine upgraded in 2009. 1 Machine base, welded construction 1 Balancing unit Vertical, single plane, permanently calibrated, 1 special spindle with centric flange 1 piezo-electric vibration sensor 1 3-phase drive motor of 1.5 kW, driven by a belt 1 Protractor disk 300 mm diameter, with 360 °, mounted on the spindle Dwodpfoq Umcrjx Aaxob 1 Safety guard For diameters up to 600 mm and heights of 420 mm 1 SCHENCK CAB 803 measuring device - With direct data entry system via touch screen - Industrial PC with active TFT color monitor - Visualization of results via vector meters - Network capability - Polish dialogue - Modular, easy-to-use system design - Optimized signal processing system via digital Schenck MMD filter - Intelligent, self-diagnosing measurement electronics system - Operation using standard Windows routines - Programs for: - Straight compensation, keyway, compensation index - Tolerance calculation according to ISO 1940 - Log report in PDF format Balancing speeds from 0 to 720 RPM - Smooth Max residual unbalance 5 - 10 gmm (DIN 1319)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 10 kg, input voltage: 230 V, year of last overhaul: 2023, SCHENCK Highspeed Special Balancing Machine Type 110 MBRS for turbocharger core assemblies a for service, repair shops as well as research and development departments. The correction of the static unbalance can be performed inside the balancing machine on the compressor wheel side directly on the machine. Max balancing speed 250,000 rpm Dwodpfoq I Rz Rsx Aaxjb

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 5 kg, total width: 360 mm, total length: 700 mm, Universal dynamic balancer for rotors from 10g - 5kg Dodpfx Aasuh Svpexewb

Condition: excellent (used), Year of construction: 2012, operating hours: 1,800 h, functionality: fully functional, workpiece weight (max.): 20,000 kg, total width: 3,000 mm, total length: 9,000 mm, total height: 3,000 mm, type of input current: DC, SCHENCK, HM60U, max diameter 3000mm, max weight of rotor 20.000 kg, New measuring unit CAB920 SmartTouch (2025) SCHENCK, Protection enclosure included, CE sign, calibration certificate February 2026, drive 75kW drive with high speed gear box 3 shifts, pair of roller bearing for journal dia. 50 - 200 mm, pair of roller bearing for journal dia. 200 - 400 mm, lubrification system for roller carriages Dwsdsylin Hopfx Aaxob

Condition: used, Crane motor, travel drive crane bridge drive with gearbox Sliding anchor motor, sliding anchor motor, three-phase electric motor, brake motor, crane motor, cable drive, crane drive, hoist motor, fine hoist motor Manufacturer: DEMAG Motor type: 24/10 KF8-2 Motor No.: 982869 Motor type: B5 Rated voltage: 380 VAC Rated frequency: 50 Hz Dwodpoptlblsfx Aaxob Power stage 1: 0,58 kW = 715 rpm. Power stage 2: 2,3 kW = 2900 rpm. with gearbox DEMAG type KS 12 Reduction gearbox fabric. no. 1909104 gear ratio: i = 118 with impeller for crane rail 2 pieces available, price per piece

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser source manufacturer: Rofin, laser power: 200 W, overall weight: 1,000 kg, total length: 2,300 mm, total width: 770 mm, total height: 1,800 mm, Equipment: CE marking, documentation/manual, StarCut Tube Precision CNC cutting for tubes and flat parts Precision cutting for tubes and flat materials From catheter shafts to stents, hypotubes, and more A highly stable cutting platform – the SL uses a mineral cast base – delivers contour cutting accuracy better than ±5 µm. The machine was manufactured in 2012 but never used in production. It was only checked to ensure that everything was functioning correctly. Weight (kg) 1000 Length (m) 2.3 Height (m) 1.8 Depth (m) 0.77 Other dimensions Pallet not included in the dimensions We can assist with delivery to any location. The machine is in very good technical condition. The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój, Poland. Dodpfx Aozt A H Rsaxswb

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: E1TAH0029, grinding length: 600 mm, grinding width: 300 mm, grinding wheel diameter: 304 mm, table length: 600 mm, table width: 300 mm, TECHNICAL DETAILS Grinding length max.: 600 mm Grinding width max.: 300 mm Distance from table surface to spindle center: 585 mm Grinding wheel dimensions: 304 x 31.75 x 76.2 mm Table and magnetic plate Table size: 600 x 300 mm Magnetic plate: 600 x 300 mm Axis movements Hydraulic table longitudinal movement: 650 mm Automatic transverse movement: up to 310 mm Machining: fully automatic in 3 axes Spindle and power Grinding spindle power: 3.7 kW Spindle speed, frequency inverter max.: 2,100 rpm Machine bed: 780 x 750 mm Dwedpfx Aezgux Seaxob MACHINE DETAILS Dimensions and weight Dimensions: approx. 2,700 x 1,600 x 1,850 mm Machine weight: approx. 1,990 kg EQUIPMENT Fully automatic machining in 3 axes Touchscreen control panel with program management Automatic central lubrication Cooling system with automatic paper filter Enclosed splash guard with lighting Electronic handwheel