Used Pre Heater for sale (15,960)

Condition: excellent (used), Year of construction: 2008, Weishaupt RGMS 30 dual fuel burner gas+heavy oil Output: 2600Kw Year: 2008 Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Gjdpfsmnqbwjx Amueit

Condition: excellent (used), Year of construction: 2007, Buderus SB735 low temperature boiler Year: 2007 Output: 1200Kw Gjdpfonr Ek Ujx Amueit Burner: Weishaupt oil or gas burner on request

Condition: good (used), 346 USED Pre-proofer Kovy, for elongated and cut rolls. The device is in working order. The device may be for PARTS. We have two of these devices. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the device. Giodpfxjyuvwme Amust The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Year of construction: 2013, condition: like new (used), functionality: unexamined, machine/vehicle number: 130365 bis 130368, The heating units were acquired as part of a package in conjunction with a machine takeover from VW/Dieffenbacher and are not required. It is assumed they have very few operating hours (previously used in a laboratory setting). Gsdpfx Amox An Eqouoit

Year of construction: 2015, condition: excellent (used), Reportedly very little used Plümat model BFL 851 automatic machine to fill and close flexible pre-sterilized IV-Bags under pharmaceutical conditions. Made in 2015, the line consists of frame with safety guard, manual bag feeding, printing station, automatic bag infeed, tube cutting station, filling station, tube welding station, tube cooling station, bag outfeed, control cabinet. The filler is a linear single lane system. The system is in compliance with GMP and FDA standards. - processable bag formats (2 tubes = free tube length 30 mm presealed with Vial stopper & 40 mm sealed by welding or open tube): 100 ml, 250 ml and 500 ml - capacity: 100 ml / 250 ml / 500 ml = 600 bags/hour - filling accuracy: 100 ml = ± 2.0 %, 250 ml = ±  1.0 % and 500 ml = ±  0.7 % - dosage range: 100 ml - 1000 ml - welding method used: heat contact welding - filling system: SIEMENS S7 including counter card with mass-flow measuring system and pneumatic filling valves - controller: SIEMENS S7 Microbox with Profibus DP and TP 1500 touch terminal - power supply: 5.5 kW, 230/380 V, 50 Hz - compressed air supply: approximately 700 l/min, min 6 - max 8 bar - cooling water supply: approximately 4 l/min, temperature 18-21°C Gijdpfx Amolhqndouot - weight: approximately 1350 kg (net) and 1750 kg (gross) - dimensions: 4263 (length) x 1050 (width) x 2140 (height) mm

Year of construction: 1998, condition: excellent (used), Dryer Digicolor Giodpfx Amei T Hzzsujt Type: Heater Mode: EH 15 AC - T Year 1998 Plus,Suction appliances

Condition: excellent (used), Year of construction: 1999, Manufacturer BLACKHEAT BH 50 year of production: 1997-2002 heat output: 45kw gas type: G20 nozzle diameter: 6mm Gisdpfsn Uvgiox Amujt nozzle pressure 8.7mbar pipe length: 9-12 meters p connection: 360mbar Connection voltage: Max. current consumption: IP30 AC 230V 50Hz

Condition: good (used), Year of construction: 1998, gas heater WSG 100PA 9800m3 / h hall heating made by WSG 100PA Maximum air flow: 9800 m3 / h heating power 110 kW Gas connection: 3/4 " gas: g20 natural gas axial fan 2pcs electric power: 230v 50Hz 0.62kw can be suspended mechanically adjustable slats honeywell gas regulator Godpfohrnv Nsx Amusit enclosure Size H: 150 cm SZ: 100 cm M: 155 cm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Dohmeyer Cryogenic Spiral Freezer with Pre-freezing Tunnel Dohmeyer's spiral cryogenic freezers are designed for rapid freezing or chilling of food products using liquid nitrogen (LIN – Liquid Nitrogen). They are mainly used in the food industry, especially for products requiring quick freezing such as meat, seafood, pastries, ready meals, and other delicate products. Model: DOH-SPK-D244-W26-E21-LIN-2017 Type: Cryogenic Freezer Spiral Serial number: 201703033177 Gedpfxowp Uhbo Amusit Year of manufacture: 2017 Cryogenic gas/operating pressure: LIN / 2…4 bar Compressed air/pressure range: 6…8 bar Power supply: 3x400V + N + PE, 50 Hz Weight: 16,000 kg Pre-freezing tunnel/cryogenic tunnel freezer Brand: ENT Edelstahl- und Nahrungsmitteltechnik Type: CFP 600 Serial number: 03 133/2 Year of manufacture: 2017

Year of construction: 2026, condition: new, functionality: fully functional, The PR8 pre-washer is designed for intensive pre-washing of plastic waste in recycling lines. The machine removes sand, soil, and mechanical contaminants, preparing material for further washing stages. Suitable for continuous 24/7 industrial operation. Materials: PE, PP, HDPE, LDPE, plastic films, post-production waste Technical data: Capacity: up to 2000 kg/h Drive power: 30 kW Rotor length: 3000 mm Rotor diameter: 680 mm Dimensions (L x W x H): 3689 x 1766 x 3294 mm Inlet opening: 500 x 450 mm Features: Heavy-duty industrial construction Replaceable wear parts Easy service access Giedpjyh Hr Eofx Amuet Ready for integration into complete washing or recycling lines 📩 Available in customized configurations. Contact us for details.

Condition: used, Year of construction: 2020, Pre-feeder 1600 width /2000m Bottom printing Max sheet 1270x2032 mm Min sheet 400 x 600 mm Thickness max: 9mm Giodev Ni I Repfx Amuot Max height of bundle 250 mm Min height of bundle 20 mm Height pile: Standard 1900 mm with elevation of 300mm : 220 mm With elevation of 500mm : 2400 With elevation 700mm : 2600 Max weight pile : 1300kg

Year of construction: 2016, condition: used, functionality: fully functional, Miltenyi Biotec GentleMACS Octo Dissociator with heaters. The gentleMACS Octo Dissociator with Heaters is a benchtop instrument for the fully automated and standardized tissue dissociation or homogenization of up to eight samples. Equipped with eight individual heating units and numerous optimized and ready-to-use gentleMACS Programs the gentleMACS Octo Dissociator with Heaters offers a fully automated workflow for tissue dissociation. In addition the instrument allows the user to create user-defined programs for almost any biological material. All eight positions can be operated independently. Single-cell suspensions or thorough homogenates are easily and reproducibly obtained using the unique C Tubes or M Tubes. These single-use gentleMACS Tubes allow sample preparation in a closed and sterile system, providing a high level of user safety and minimize cross-contamination. Applications Gijdpfot E Hncex Amust The gentleMACS Octo Dissociator with Heaters is equipped with several programs for fully automated tissue dissociation into single-cell suspensions, including: - mouse or human tumor - mouse or rat neonatal heart - neural tissue - mouse spleen, lung, lamina propria, epidermis, or liver - mouse or rat skeletal muscle - and more Additionally, user-defined programs can be used to create fully automated workflows for all other tissue types. Good working condition. Please check out our other listings as well.

Condition: good (used), Pre-melting Polyurethane Glue for Edgebanders - Available No. 4 Units Gedevkpcdjpfx Amuoit Model MC 12, CE

Condition: excellent (used), functionality: fully functional, Electric water heater Giodpfsvbfvhex Amust Maximum power - 18kW

Condition: new, functionality: fully functional, empty load weight: 105 kg, input voltage: 230 V, warranty duration: 24 months, temperature: 95 °C, Technical Data: Condition: NEW Catalog Number: 1.030-500.0 Power Type (Ph/V/Hz): 1 / 230 / 50 Connected Load (kW): 0.3 Inlet Temperature (max.): 50°C Inlet Flow Rate (min.): 400 l/h Water Flow Rate (l/h): 400-1000 Gijdpjxtc Rcefx Amuet Safety Valve Operating Pressure (max.): 200 bar Hot Water Operating Temperature (max.): 95°C Burner Output: 43 kW Heating Oil Consumption (max.): 3.5 kg/h Fuel Tank: 20 L Fuel: Heating Oil EL or Diesel Operating Weight: 105 kg Length x Width x Height (mm): 880 x 680 x 860 Scope of Delivery: Classic Hand Spray Gun - M22 Thread Spray Lance: 1050 mm Hose: 10 m - DN8 - 250 bar - 100°C - M22/M22 Hose (connection between high-pressure cleaner and hot water generator) - 3 m - DN8 - 315 bar - 60°C Durable unit: - The robust frame provides protection during continuous and intensive use. - All parts requiring maintenance are easily accessible. - Integrated fuel filter and the option to remove the fuel tank for cleaning.

Condition: new, Year of construction: 2025, DPF HEATER PRO PLUS™ is a device designed for drying all types of diesel particulate filters (DPFs) and catalytic converters, made entirely of stainless steel AISI 304 and acid-resistant steel AISI 316. It is equipped with an integrated measurement system and a drying system that operates at temperatures up to 130°C using a side-channel turbine. A built-in thermal printer allows for printing contamination measurements of the filter both before and after regeneration. This device is an excellent additional option for DPF cleaning machines that do not have an integrated drying system. Giodpfxjglpywj Amuet BENEFITS OF USING THE DPF HEATER PRO: - Operates independently of the regeneration machine - Optimizes the filter regeneration process - Low drying costs - Contamination measurement system – test results confirmed with a printout - Quick filter clamping system – Camlock - Adapters for passenger cars and trucks - Full automation of the drying process TECHNICAL PARAMETERS: - Weight: 100 kg - External dimensions (L x W x H): 92 x 51 x 114 cm - Voltage: 3 x 400 V - Maximum power: 7.5 kW - Frequency: 50 Hz - Ambient temperature: 5 - 35°C - Airflow: up to 390 m³/h - Overpressure: up to 370 mbar - Vacuum: up to -300 mbar - Measurement system: integrated - Drying system: integrated - Hose diameter: 6/4" - Drying temperature: adjustable within 70°C - 130°C - Safety features: pressure sensor, emergency safety switch - Declaration of conformity: CE

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: GE-KEK-100L, 🔧 Manual Spray Chemical Pretreatment Cabin – 1.6 × 1.6 × 2.2 m – 800 L • Cabin dimensions: 1,600 × 1,600 × 2,200 mm • Chemical tank: ~800 L • Pump/spray unit: ST 84 HE Gijdpow Nvykofx Amuot • Heating elements: 2×6 kW (water temperature: 45–60 °C) • Motor: ~1.5 kW • Power connection: 3×380/220 V, IP68 protection • Manual spray operation, automated circulation, rinsing. Closed system for safe chemical handling • Spring tray technology – for direct pretreatment prior to powder coating Condition: Excellent, complete unit, EU standard control, documented operation Price: €10,900 + VAT

Condition: new, Year of construction: 2024, I sell the new fourside moulder LEADERMAC COMPACT 623C (2M), New machine year 2024. Showroom machine ! Configuration 6 spindles: Bottom 5,5 kW / 7,5 HP Right 5,5 kW / 7,5 HP Left 5,5 kW / 7,5 HP Top 7,5 kW / 10,0 HP Right moulding head 11 kW / 15,0 HP / adjustable speed Left moulding head 11 kW / 15,0 HP / adjustable speed Feeding speed adjustable 6-36 m/min. Feeding motor 3,0 kW / 5,5 HP + inverter Element width max. 15-230mm Element height max. 10-150mm Alle 6 Spindels 6000 rpm. / the left and right squaring moulder with adjustable speed Electronic programmer for setting the top spinde, aka working height. Material pressures for short elements. 3-zone pneumatic pressure system for feeding wheels. Total weight 4500kg. Total power 51,18 kW / 68,25 HP Fully working. Available immediately Showroom machine, fully NEW ! Tools, Moulding heads, squaring heads, and all accessories included. Gisdorfuc Rjpfx Amujt

Condition: new, We would like to offer shafts dedicated for HAAS 2000XL, 1500, and TEREX TDS 820 machines, equipped with side combs and a breaking bar. -4-7-7 -4-9-9 PROTECHNIKA is a company with 21 years of history and from the very outset has specialized in the production of spare parts and complete recycling lines. In recent years, we have expanded our product portfolio to include the manufacturing of grinding shafts for slow-speed shredders. Through the implementation of automated welding processes and proprietary production technologies, we have significantly reduced lead times while maintaining consistently high quality. Grinding shafts are a series product, which, among other things, enables us to collaborate with machine manufacturers as an OEM supplier. What distinguishes PROTECHNIKA from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland-certified quality - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 compliant - Welders certified to ISO 9606-1 Giedpfxjx Hhuij Amuet - ISO 9001:2015 - ISO 14001 - In-house design department capable of meeting any customer requirements - Our own RESEARCH AND DEVELOPMENT CENTER Customer relations are of paramount importance to us, as their satisfaction is our success!

Condition: used, Year of construction: 2019, machine/vehicle number: div., functionality: fully functional, 2x ROLLEX ironing presses, for pre-ironing (PRE-IRON); working width: 2.25 m, Washing machine / dryer set Washing machine Milnor; load capacity: 65 kg; year: 2004 + Dryer Kannegiesser; load capacity: 50 kg; year: 2005 + Dryer Passat; load capacity: 50 kg; year: 1984 Gedpfjwpi Rkox Amueit

Condition: used, machine/vehicle number: Model TS170, power: 50 kW (67.98 HP), input voltage: 240 V, heating capacity: 50 kW (67.98 HP), L.B. WHITE PREMIER 170 INDUSTRIAL HEATER – INDIRECT FIRED – 49kW L.B. White Premier 170 industrial heater (Model TS170). High-output indirect-fired unit producing clean, dry heated air – ideal for construction sites, workshops, drying, or temporary heating. Specs: Approx. 50kW output (170,000 BTU) Propane gas 240V single phase Giodjy Rfd Nopfx Amuet High airflow unit (industrial capacity) Condition: Good used condition Sold as seen Uses: Site heating Drying plaster / concrete Warehouse heating Marquees / temporary structures Message for more details or video of it running.

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility Gjdpfx Amey Iplfeusit

Condition: used, Year of construction: 1991, Colour: Grey High frequency press Brand: Italpresse Type: GB/13 Max pressure: 120T Pressing area 2500x1300mm Pressing height 200mm 6 cylinders diameter 90mm Speed 12m/min. Complete line with loading system, gluing machine, destacker and High frequency cabinet (separate for sale) Gedpfx Aswng Tmjmusit Machine needs some maintenance. Probably the PLC lost his parameters, and some small parts needs to be changed.  - Details: - └ Description: Exclusive High-frequency cabinet - Year: 1991 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Gedsy R Npispfx Amusit Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Giodpfsy R Npcsx Amuot Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.