Used Pre Heater for sale (18,317)

Condition: excellent (used), functionality: fully functional, Pneumatic material feeding Feeder roll width: 40 cm Material fed from a stack Stack height: 80 cm Maximum working width: 26 cm Total length: 180 cm Width: 42 cm Height without stack: 78 cm Prjdpfxe Afxk Te Akiec

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, table length: 800 mm, table width: 550 mm, Equipment: documentation/manual, H-Frame Press – 30 t – Double-column Press – 800 × 550 mm – Versatile Assembly & Production Press For sale: hydraulic double-column press (H-frame press) with a pressing force of 30 t. The machine is highly versatile and can be used as an assembly press, small batch press, hand-loading press, vulcanizing press, or heated platen press. This is an approximately 2.5-year-old, unused machine with zero operating hours, offered with full warranty. Inspection is possible at our warehouse in Ennepetal. ===== Technical Specifications & Information: Hydraulic Double-Column Press – 30 t ==== General Information - Design: Double-column press (H-frame) - Pressing force: 5–30 t (adjustable) - Machine weight: approx. 2,000 kg - Paint finish: RAL 7035 (Light Grey) / RAL 2009 (Orange) ==== Working Area - Table size: 800 × 550 mm (additional variant: 700 × 500 × 70 mm) - Ram plate: 700 × 500 × 80 mm - Max. distance table/ram: 500 mm - Stroke: 500 mm - Front opening width: 820 mm - Table height: 800 mm ==== Speeds - Approach speed: approx. 45–50 mm/sec - Return speed: approx. 40–55 mm/sec ==== Hydraulics - Operating pressure: up to 300 bar - Hydraulic pump: ASC, 28.5 l/min - Motor power: 11 kW - Oil tank: approx. 100 l - Valves: Bosch Rexroth ==== Construction & Guidance - Cylinder: Ø 110 mm (piston), Ø 70–75 mm internal - Guide columns: Ø 50 mm - Ram guided by 2 columns - Robust machine frame - Rear and side guards fully enclosed ==== Control & Operation - Pressing pressure adjustable via rotary control - Adjustable two-hand operation (3 m supply cable) - Position limitation via cam switch - Travel limitation via movable sensors - Automatic positioning to defined stroke points - Resettable piece counter ==== Safety - Light curtain 500 mm (14 mm resolution, finger protection) - Reach-under protection - Optional reach-over protection - Emergency stop switch Pedpfx Asu U Ey Ijkiorc - Certified safety inspection ==== Equipment - Control cabinet technology from brand manufacturers - Illumination in press workspace - Eject chute in table ==== Options - Heated platens: 500 × 500 mm (up to 200 °C, with controller & timer) - Commissioning & operator training ==== Lead Time & Service - Delivery time: approx. 6 weeks (without heated platens) - Heated platens: approx. 8 weeks - Customer service: Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen, Gelsenkirchen ===== Assembly work, small batch production, forming applications, vulcanizing, hot pressing Hydraulic press, hydraulic press, double-column press, H-frame press, assembly press, small batch press, vulcanizing press, heated platen press, industrial press Are you looking for a hydraulic press customized for your application? Contact us for a tailored offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC regulations, and EU safety standards. Additionally, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian occupational safety standard NR 12, which builds upon these regulations. Our core strengths are special machine engineering and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. The hydraulic systems primarily use components from leading European manufacturers.

Condition: used, System: Chamber filter press, used Type: REWA Application area: sludge dewatering Design: side rail Filter plate size: 470x470 Number of plates: 27 + head and end plate Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 17 m2 Press volume: approx. 90 dm3 Filter pressure: approx. 15 bar Pump technology: optional Washing system: No Psdpfjwqyfhjx Akisrc Miscellaneous: LxWxH 3000x550x1200 mm Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.

Year of construction: 2001, condition: used, Profile height: max. 150 mm Profile width: max. 300 mm Milling area: 365 x 230 mm Pneumatic workpiece clamping Prjdszmhqzjpfx Akiec Minimum quantity spray device 2 pneumatic copying pins with copying pin 5/ 8/ 10 mm

Condition: ready for operation (used), Year of construction: 2001, operating hours: 136 h, travel distance X-axis: 610 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 828 D SL, total height: 1,987 mm, total width: 1,720 mm, table width: 350 mm, table length: 710 mm, overall weight: 2,600 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,000 W, tool weight: 6,000 g, product length (max.): 1,880 mm, number of axes: 3, This 3-axis PreMill V 610 B was manufactured in 2019. It features an X-axis travel of 610 mm, Y-axis travel of 350 mm, and Z-axis travel of 460 mm. The machine has a robust table size of 710 x 350 mm and a maximum workpiece weight of 350 kg. If you are looking to get high-quality machining capabilities, consider the PreMill V 610 B vertical machining centre we have for sale. Contact us for further details. - Distance Spindle Center to Table Surface: 100 - 560 mm- Max. Workpiece Weight: 350 kg- Rapid Traverse Speed (X/Y/Z): 12 m/min- Feed Speed: 10 m/min- Positioning Accuracy: +/- 0.008 mm- Repeatability: +/- 0.005 mm- Tool Changer Type: Carousel- Tool Storage Capacity: 16 slots- Max. Tool Diameter: 100 mm (150 mm without adjacent tools)- Max. Tool Length: 300 mm- Spindle Motor Power (100% ED): 7 kW- Feed Motor Power (X/Y/Z): 2.3 kW- Power Supply: 12 kVA- Compressed Air Supply: 6 bar- Coolant Tank Capacity: 100 L- additional features available: ShopMill, 3D Simulation, Auto Power Off, Rigid Tapping, Flat Guideways in X/Y/Z, Chip Conveyor (Screw type) with Chip Cart, Spindle Ring Flushing, Prepared for CTS (IKZ), Prepared for 4th Axis, Central Oil Lubrication, LED Signal Lamp & Workspace Light, Vice Psdpfjzn Urhox Akiorc Technical Specification Taper Size SK 40 Through-spindle Coolant No

Condition: ready for operation (used), Mechanical spindle press / four-column press - Four-column press - Pressing force approx. 40 tons Dimensions: L x W x H 1.5 x 1.5 x 2.0 meters / Weight 1000 kg Errors and omissions excepted. Predpfx Aozta Tuekiec

Condition: used, Year of construction: 2010, functionality: limited functionality, pressing force: 110 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale length: 1,200 mm, bale height: 800 mm, bale weight: 500 kg, type of input current: three-phase, input voltage: 400 V, input current: 161 A, overall weight: 36,000 kg, oil tank capacity: 1,500 l, power: 90 kW (122.37 HP), input frequency: 50 Hz, Equipment: documentation/manual, We are offering this used EUROPRESS channel baling press, model 8300 V 5 K, manufactured in 2010. Prjdpjzwpdwjfx Akijc Type: Channel baling press 8300 V 5 K Factory number: 10060294 Drawing number: 2300000 Year of manufacture: 2010 Weight: approx. 36,000 kg Rated voltage: 3 x 400 V / 50 Hz Drive power: 90 kW Rated current: approx. 161 A If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 1989, condition: not inspected (used), Industrial twin-shaft shredder C3 VKF-250 (Industrial twin-shaft shredder C3 VKF-250 from the manufacturer Přerovské strojírny ČR) Technical specifications: • Type: C3 VKF-250 • Manufacturer: Přerovské strojírny • Year of manufacture: 1989 • Drive: 2 x electric motor with gearbox (engine power 22.5 kW) • Power supply: 3 x 400 V • Machine location: Papir-Novak s.r.o. – Czech Republic Machine application: primarily for processing: • plastic waste, • wood, Pedpfx Akezt Hmzsierc • paper and cardboard, • textiles, • cables, • light industrial and recyclable waste. Machine condition: • mechanically complete, • equipped with two electric motors with gearboxes, • control panel (distributor) missing, • functionality has not been verified – the machine has not been tested, • stored in a warehouse for an extended period, • the machine is suitable for reconditioning, commissioning, or as a source of spare parts.

Condition: excellent (used), functionality: fully functional, shelf length: 3000 mm shelf width: 1300 mm clearance between shelves: 30 cm oil heating Prjdpfozx U Haex Akiec 6 hydraulic cylinders safety shear pin

Condition: excellent (used), functionality: fully functional, shelf length: 3000 mm shelf width: 1300 mm integrated, electrically powered water heating system 6 hydraulic cylinders 5 loading cycles safety shear pin Podjzx Aicopfx Akierc CE marking

Condition: used, End mill diameter: 300 mm Max. cut-off width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Sackson length: 500 mm Prjdpfxezfk Sfj Akioc Stop between 20° - 90° - 20° Pneumatic workpiece clamping Minimum quantity spray device Pneumatic material feed via foot switch Weight: approx. 280 kg

Condition: used, Manufacturer: OspreyFrank Model: iSteam iS18 Type: Dry steam cleaner Steam pressure: 8 bar Steam temperature: approx. 180 °C Power: 3500 W Voltage: 230 V Prjdpfx Akezf U Aujiec Condition: used

Condition: excellent (used), Offer consisting of: complete compressed air system comprising SCC Flexi 55kW screw compressor, air-cooled, SCC DRA 480 refrigerant dryer, only about 2000 load hours, compressed air tank 1000 litres (OKS brand), year of manufacture: 2021 Prjdpeyl S Ebsfx Akijc

Condition: used, Used Premier Labellers model P150 tamper evident labeller. Can do front and back tamper evident seals/labels to cartons and boxes. Approximate capacity 150PCS/min. Pjdpfoymazysx Akijrc

Condition: used, functionality: fully functional, VERTICAL CLAMP FOR WINDOWS ITALPRESSE Pedsx Rrp Eopfx Akiorc

Year of construction: 1996, condition: used, Hydropneumatic operation Punching force: 50 kN Pedpfx Aoyxpw Njkisrc Work hub: 35 mm Overhang: 110 mm Installation height: 140 mm

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, Container includes the following contents: - 10ft storage container, new / Color: Anthracite grey - SSC-Strong 37 Vario • Speed-controlled screw compressor • Free air delivery at 8 bar: 6.3 m³/min • Dimensions (LxWxH): 1432 x 1000 x 1480 mm • Weight: 705 kg - 2 compressed air tanks, 500 l each o With AD2000 certification o Horizontal design - 2 Ecomat 31 condensate drains - 2 sets of fittings - SCC refrigerant dryer DRA480 o ISO 8573-1 Class 4 Pjdpsxc T Evofx Akijrc o Refrigerant: R407C o Capacity: 480 m³ - Pre-filter FIL934-P - Fine filter FIL934-M The compressor has seen very little use and therefore has low operating hours. Upon request, we can read the operating hours and run the compressor for demonstration.

Year of construction: 1995, condition: good (used), machine/vehicle number: 8883, Offer 26051 Technical Specifications: - Feed of the milling unit manual - Worktable height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 300 mm - Max. milling height 150 mm - Max. milling depth 110 mm - Max. milling length 500 mm - Angle-adjustable stop left & right 20° - 90° - Spindle speed 2800 rpm - Drive 400 V 2.2 kW - Compressed air connection 6 - 8 bar - Air consumption per cycle 10 l - Pneumatic profile clamping Psdpfx Aoyz S Trokijrc - Spray device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: RARIPRESS, Hydraulic pump, hand pump, high-pressure pump -Type: RP 62C Prsdpfx Akoyzmvhjiec -Pressure range: max. 700 bar -Quantity: 1x hand pump available -Dimensions: 580/185/H180 mm -Weight: 14.7 kg

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm Cutting area up to 80x200 mm Stroke length: max. 800 mm with digital display Saw blade RPM: 2,000 - 3,800 rpm. Piece counter with automatic shut-off when the target value is reached Continuously adjustable pneumatic material feed Prodpfoxn Iq Dsx Akisc Hydro-pneumatic saw feed Pneumatic material clamps Spray device Including user manual Machine dimensions: 2100 x 1100 x 1500 mm (W x D x H) 1000 kg

Year of construction: 1997, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Predsx Ecg Uspfx Akioc Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 4712, functionality: fully functional, pressing force: 120 t, number of cylinders: 6, cylinder diameter: 90 mm, pressing speed: 200 mm/s, TECHNICAL DETAILS Maximum pressure: 120 t Pressing area dimensions: 2,500 x 1,300 mm Pressing height: 200 mm Predjyuxh Iopfx Akijc Number of cylinders: 6 Cylinder diameter: 90 mm Pressing speed: 12 m/min EQUIPMENT Complete line with: Loading system Gluing machine Destacker High-frequency cabinet (offered separately)

Condition: used, Hydropneumatic operation Max. punching height: 90 mm Abutment stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg Prsdpfjw Inudex Akijc

Condition: reconditioned (used), Fortuna Roll Press/Dough Dividing Machine, Size 3, for dough pieces weighing from 35 to 85 grams. The machine has been refurbished and repainted. Equipped with 3 forming plates. 4x16 Ah connection. Prodpfsc Utkajx Akioc The machine is in excellent working order and can be put into operation immediately. If you have any further questions, please contact us. Thank you.

Condition: used, Gate valve with flange connection, butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve - Manufacturer: Valpres -Type: 72000007 -Size: DN32 PN40 -Price: per piece -Number: 3 piece -Dimensions: 155/250/50 mm Psdpfx Aksfylcaeiorc -Weight: 4.3 kg/piece