Used Planing Stop for sale (8,594)

Condition: used, Year of construction: 2011, Usable working width: 520 mm Thickness table dimensions: 520 x 900 mm Max. working height: 300 mm Min. working height: 3.5 mm Min. workpiece length: 220 mm Max. material removal: 8 mm Cutterhead diameter (number of cutters): 120 mm (4 pieces) Cutterhead speed: 4500 rpm Pjdozimbdopfx Ahaopw Feed rate: 5-8-12-18 m/min Motor power: 7 kW Dust extraction port diameter: 150 mm Dust extraction volume: 1300 m³/h Weight: approx. 680 kg Dimensions: 1150 x 1100 x 1250 mm Storage location: Garbsen

Condition: good (used), Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: MEP, Horizontal band saw, Automatic band saw -Drive: 4.4/5.7 kW -Cutting data flat 90°: 320 x 200 mm Ppjdpfoy Hu H Esx Ahaow -Cutting data for 90° square: 250 mm -Cutting data flat 45°: 240 x 200 mm -Cutting data for 45° square: 210 mm -Saw blade speed: 2x speeds -Saw blade: 3150 mm -Coolant system -Transport dimensions: 3 meters -Weight: 1300 kg

Condition: ready for operation (used), KUPFERMÜHLE – DOMA-g-1620-V44 Four-sided planer Working width max. 1620 mm Planing height, 2 sides max. 300 mm Pjdpezlbz Refx Ahaepw Planing height, 4 sides max. 240 mm (OPTIONAL: conversion to 300 mm) Feed rate in 6 stages 4.5 - 26 m/min Total electrical power 91 kW 4 horizontal planing shafts bottom right 11.0 kW bottom left 15.0 kW top right 18.5 kW top left 18.5 kW 2 vertical milling heads, 7.5 kW each with mounted aluminum planing heads H 240 mm

Condition: good (used), Rear back gauge fingers for Promecam press brakes, adjustable in height. Ppodpfjzagq Ujx Ahajw Sold as a complete set or in pairs.

Year of construction: 2017, condition: as good as new (ex-display), Technical data: - Maximum dimensions (W x H) of finished part: 180 x 105 mm - Minimum working width: 23 mm - Minimum working height: 6 mm - Minimum length of individual workpieces: 300 mm - Feed rate: 6 - 12 m/min - Spindle speed: 6,000 rpm - Spindle diameter: 35 mm - Usable length of horizontal spindle: 190 mm - Usable length of vertical spindle: 120 mm - Adjustment range for feed table and infeed guide: 10 mm - Tool diameter of horizontal spindle: 100 mm - Minimum/maximum tool diameter of vertical spindle: 100/124 mm - Profiling capability of vertical spindle: 12 mm - Adjustment range for the tool heads: +/- 1 mm - Motor power of horizontal spindle: 7.5 kW Ppsdpfxeii Rxgs Ahasw - Motor power of vertical spindle: 7.5 kW - Motor power of feed: 0.75 / 1.1 kW - Connection voltage: 400 V - Phase(s): 3 - Mains frequency: 50 Hz - Length of material feed table: 2300 mm - Diameter of feed rollers - Diameter of extraction hoods: 1 x 150 mm, 2 x 120 mm

Condition: excellent (used), Planing width 250 mm Planing height 120 mm 1. lower spindle 2. right spindle 3. left spindle 4. right spindle 5. upper spindle 6. lower spindle 7. lower spindle 8. Universal spindle 360* - Hydraulic feed 6-60 m/min. - 10x driven table rollers Podpfxowlk E Io Ahaopw - Spindle diameter 50 mm

Year of construction: 2021, condition: ready for operation (used), Two identical VAG diaphragm check valves are available. Nominal size: DN350, pressure rating: PN10, max. operating pressure: 10bar, max. operating temperature: 50°C, medium: water (1st stage filtrate), face-to-face length: 800mm, flange outside diameter: 505mm, flange thickness: 30mm, bolt circle diameter: 460mm, weight: approx. 280kg. Including two flange-to-flange pipe sections. Both items were only in contact with 1st stage filtrate in a drinking water treatment plant. Documentation available. An on-site inspection is possible. Ppjdpfx Ahozkvkkoasw

Condition: used, Planer machine with planing shaft at the bottom and top Double-sided planer for producing slats Feed rate 110 m/min Maximum planing width 310 mm Pedpoy Ry Ddefx Ahaepw Electrical power 95.75 kW Bottom: 37 kW Top: 45 kW Feed: 13 kW Jointing mechanism at the bottom and top

Year of construction: 1989, condition: used, - Type KM 42 Arrangement of planing rollers: bottom/top/saw roller Working height: 800 mm Planing width: max. 420 mm Planing height: max. 250 mm Bore of the circular saw blade: 70 mm with 2 keyways, 20.5 x 4.25 mm Diameter of the planing spindle: 2 x 60 mm Adjustment of the working width: manual Adjustment of the working height: electric Feed speeds: 7-42 m/min, continuously adjustable Feed motor: 5.5 kW Number of driven rollers in the table: 3 Podpjgqrtijfx Ahaspw Number of feed rollers on top: 6 Cables have been cut. Description: see original document, attached.

Year of construction: 1999, condition: used, Angle display: digital Podpey A Hikefx Ahaopw Length stop flap measurement display: digital

Condition: used, Year of construction: 1992, Working width: 520 mm Planing height: 250 mm Cutterhead: strip knives Number of knives: 4 Height adjustment: electric Planing thickness display: scale Feed speed: 2 speeds Infeed roller: steel Outfeed roller: steel Table rollers: no Motor power: 5.5 kW Extraction port: 140 mm Machine length: 1200 mm Machine width: 1400 mm Podpfjyt E Raox Ahaspw Weight: approx. 900 kg

Condition: used, Year of construction: 1977, Working width: 630 mm Planing height: 280 mm Ppodpfjln Ud Nox Ahaow Planing shaft: Strip cutter Number of cutters: 4 Height adjustment: electric Indicator for planing thickness: Scale Feed rate: 7 / 14 Infeed roller: Steel Outfeed roller: Steel Table rollers: yes Power consumption: 12 kW Dust extraction port: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 2000 kg

Condition: used, Year of construction: 2002, Working width: 510 mm Planing height: 250 mm Planer cutterhead: Tersa Number of knives: 4 Height adjustment: electric Thickness display: digital display Feed speed: continuously variable Infeed roller: rubber Outfeed roller: rubber Table rollers: no Ppsdpfx Ahszhm Dioasw Motor power: 5.5 kW Dust extraction port: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 900 kg

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Pedpowc Ri Iofx Ahajpw Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar Pjdpfx Ahjwc Rk Esaspw TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) Pedowc Afhjpfx Ahajpw One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: excellent (used), For sale: Guilliet KXK four-sided planing machine Very well-maintained, from a one-man carpentry shop Year of manufacture: 1995 Max. planing width: 180mm Max. planing height: 120mm Pedpfozivf Sex Ahaopw Length of feed table: 2100mm Tool diameter: 100mm Motor powers: Surfacing cutter: 3.7 KW Right cutter: 3.7 KW Left cutter: 3.7 KW Thicknessing cutter: 3.7 KW Feed motor: 1.0 KW Motor power for height adjustment: 0.37 KW Motorized adjustment of the feed bar with the thicknessing cutter Dust extraction connections: Surfacing and thicknessing: each 160mm Left and right cutters: each 120mm

Condition: used, bore 80 mm length 180 mm knife system Streifenhobelmesser circle diameter 220 mm number of blades 4 Z material Stahl Psdpfozdvbcox Ahajpw Available: 3

Condition: used, bore 50 mm length 260 mm knife system Streifenhobelmesser Ppodpfx Aozdva Sjhasw circle diameter 200 mm number of blades 12(6) Z material Stahl 6 clamping strips are missing.

Condition: used, functionality: unexamined, Planing machine with planing roller at the bottom and top Double-sided moulding machine Feed rate 80 m/min Planing width max. 310 mm Planing height max. 310 mm Bottom roller 22 kW Top roller 30 kW Feed 7.7 kW Jointing device at the bottom and top Psdpfoy Ryx Uox Ahaopw Year 1990

Condition: good (used), functionality: fully functional, Saw bushings DK14 Saw bushings DK16 Saw bushing DK17 and other accessories Podpfx Ajxq R Rxjhaspw

Condition: used, bore 35 mm length 180 mm knife system Streifenhobelmesser circle diameter 140 mm Ppedpfx Ahszcq Ateasw number of blades 3 Z material Stahl Available: 2

Condition: used, Roller conveyor height ~ 910 length 4.600 mm Ppedpfx Aezcganehaow Wheel width 450 mm Solid roller conveyor with stop.

Condition: used, mileage: 127,555 km, power: 75 kW (101.97 HP), first registration: 01/2021, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 5 m³, loading space length: 2,535 mm, loading space width: 1,600 mm, loading space height: 1,360 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Vehicle No. for customer inquiries: 149 ----Special equipment: * Air conditioning system, controlled (Tempmatik) * Windshield wipers with rain sensor * Seats in the cab: passenger seat as a double seat * Audio system Audio 10 (DAB, Bluetooth) * Audio system Audio 10 (radio with CD player) * Exterior mirrors, electrically adjustable and heated, both sides * DAB tuner (digital radio reception) * Automatic activation for headlights * All-weather floor mats * Vehicle without lashing points Ppedpfjzirzijx Ahaow * Rear door without glazing (opening angle 270 degrees) * Wooden flooring in the cargo area * Fuel tank: enlarged * Seat cover / upholstery: fabric Rawson * Seats in the cab: driver's seat plus (with level seat surface) * Interior trim in the cargo/passenger compartment: standard * Heat-insulating glazing * Two-way speakers in the front ----Standard equipment: * 3-button remote control for central locking * 3rd brake light * Adaptive brake light * Airbag, passenger side * Airbag, driver side * Hill-start assist * Anti-lock braking system (ABS) * Drive type: front-wheel drive * Exterior mirrors, aspherical, both sides * Outside temperature display * Mounting rails for roof rack * BlueEfficiency package * Brake assist * Braking system with ABS+ASR * Dome light in the cargo area * Design and equipment line Base * Electronic stability program (ESP) * Driver assistance system: Attention-Assist (fatigue detection sensor) * Driver assistance system: breakdown management * Driver assistance system: crosswind assist * Power windows, electric, 2-way * Windshield with antenna * Generator 185 A * Speed limiter (cruise control) * Transmission 6-speed - manual transmission * Cup holders in the rear * Cup holders in the front * Seat belt pretensioners * Grab handle, passenger side * Glove compartment, lockable * Body/structure: panel van * Body/structure: long * Communication module (LTE) for digital services * Bulkhead between cab and cargo area * Mercedes-Benz emergency call system * Model update * Engine 1.7 L - 75 kW CDI CAT * Fog lights, rear * Particulate filter * Wheelbase 3200 mm * Low emission according to exhaust standard Euro 6d-TEMP * Sliding door, cargo/passenger compartment, right * Power steering * Safety belt system with warning system (driver/passenger side) * Steel rims 6.5x16 * Daytime running lights * Interior trim, window pillars * Interior trim in the cargo/passenger compartment: hard fiber, semi-high * Lashing rails in the cargo area - side wall to roof frame * Dry-fit battery 92 Ah * Service interval display Assyst * Immobilizer * Central locking with remote control * Permissible total weight 2.80 t ----Technical data: * Wheelbase: 3,200 mm * Cargo area dimensions: L: 2,535 mm W: 1,600 mm H: 1,360 mm * Payload: 796 kg * Tire size: 205/65R16C * Tire tread: approx. 50%-30% ----€9,999 net plus VAT * A deposit will be retained for export to third countries or EU countries. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly accept your used vehicle in part exchange! * Financing/leasing also possible in difficult cases * This description serves only for the general identification of the vehicle & does not constitute a guarantee in the legal sense. * The information does not claim to be complete. The information/descriptions/images provided are non-bin

Condition: used, Year of construction: 1985, Working width: 180 mm Working height: 120 mm Number of working spindles: 4 Spindle arrangement: bottom, right, left, top Motor power, bottom spindle: 3.7 kW Motor power, right spindle: 3.7 kW Podpfx Ahezdzbnsaepw Motor power, left spindle: 3.7 kW Motor power, top spindle: 5.5 kW Adjustment, bottom spindle: - Adjustment, right spindle: - Adjustment, left spindle: handwheel Adjustment, top spindle: electric Planer heads: reversible knives Feed rate: 2 Feed roller pressure: spring-loaded Power consumption: 38 A Motor brake: automatic Dust extraction connection: Machine length: Machine width: Weight: