Used Plan Lathe for sale (13,275)

Condition: excellent (used), Passage: 120 mm Mounting: DIN 55027 / KK 8 Diameter 625 mm Iiodpexcyzqsfx Aaceh

Condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, heavy-duty trailers Iiedpfxsrd Acle Aacsh -Platform: 11,000/3000/H1100 mm -Load capacity: 100 tons -Steering: possible on both sides -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Wheels number: 32 pieces -Wheel size: 646/200-480 -Dimensions total: 12,300/3000/H1100 mm -Weight: 12960 kg -Handover: in the current condition as viewed -Note: Pay attention to the condition of the wheels

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, PLAN 10-4c heavy-duty trailer / transport trailer Iijdpfsxmuz Hsx Aacsh Payload: 25t - 25,000kg Unladen weight approx. 2,240kg Turntable steering with oscillating axles, year of manufacture 2010 Loading area dimensions: 500x200cm, loading height 76cm Very good condition, see photos Forklift available for loading Collection by appointment only in 75053 Gondelsheim Shipping by freight forwarder possible, please inquire with postcode

Condition: good (used), Year of construction: 1990, Offer 25210 Technical data: - Load capacity: 8,000 kg - Both axles steerable / all-wheel steering (knuckle steering) - Tow bar usable at both front and rear sides - Solid rubber tyres: 425 / 150 - 305 - Platform length approx.: 2,500 mm - Platform width approx.: 1,250 mm - Platform height approx.: 500 mm Iiedewwi R Hepfx Aacoh - Total length without tow bar: 3,300 mm - Total length with tow bar approx.: 4,400 mm - Weight approx.: 700 kg

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Iiodswhylvspfx Aacsh Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: used, Platform transport trailer, heavy-duty trailer Industrial trailer with 2-axle turntable steering Manufacturer: PLAN, type 11 Chassis no.: 31361-1 = year of construction 03/2015 Chassis no.: 31361-2 = year of construction 03/2015 Payload 20000 kg Unladen weight approx. 3760 kg Gross vehicle weight 23760 kg Platform height 850 mm Platform length 5000 mm (between the tarpaulin frame) Platform width: 2500 mm Overall length: 6100 mm (without drawbar) Overall width 2500 mm Tires Ø 559 x 300 mm (solid rubber tires 559/305-406.4) - 4 wheels with 2-axle turntable steering - track-running - Reversible drawbar, drawbar can be bolted to the front or rear - Drawbar with drawbar eye size 40 mm diameter - Small turning radius - Very stable outer frame made of U-beam Height 280 mm, width 95 mm - Very stable steel floor made of 10 mm checker plate Iisdpoiiumrjfx Aacjh - Tarpaulin body with steel base frame, can be loaded from the side Max. transport height 2300 mm under tarpaulin Length for transportation 610 cm (with drawbar folded up) Width for transportation 250 cm Height for transport 330 cm (with tarpaulin body) Weight per trailer approx. 3760 kg Good condition 2 pieces available Price per trailer

Condition: used, TECHNICAL DETAILS - Plate diameter : 348 [mm] - Part dimensions (rings) : approx. 70 [mm] - Part dimensions (full) : approx. 40 [mm] - Remaining work thickness : approx. 5 [mm] Ijdpfx Ajug U Dmsacsih EQUIPMENT - Same as on photos

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport vehicle: Industrial trailer with 2-axle steering -Platform: 2500/1255/H490 mm -Load capacity: 11 t -Tires: solid rubber -Number: 4x transport trolleys available -Price per piece -Total dimensions: 4360/1255/H490 mm -Weight: 780 kg/pc. Iedpjt Rbkcsfx Aacoih

Condition: ready for operation (used), functionality: fully functional, Small manual Turning-machine/Lathe 1IC611V with quick locking collet chuck. With Machine 4 collets. Iijdpfx Aowbdmkeacsh More collets is possible to buy, ~25EUR/pc.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm Iodpfxoxdmgvj Aacoih CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: used, TECHNICAL DETAILS - Plate diameter : 348 [mm] - Part dimensions (rings) : approx. 70 [mm] - Part dimensions (full) : approx. 40 [mm] - Remaining work thickness : approx. 5 [mm] Iiedpfxjug U Dgo Aacjh EQUIPMENT - same as on photos

Condition: used, Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Manufacturer: Plan, industrial trailer platform truck -Platform: 2300/1190/H450 mm -Load capacity: 2920 kg Iedpjl Sr Awofx Aaceih -Total dimensions: 3820/1200/H450 mm -Weight: 360kg

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport vehicle: Industrial trailer with 2-axle steering -Platform: 3600/2100/H610 mm -Load capacity: 4 t -Tires: 6.00-9 pneumatic tires Iodpfx Aaeupbcpeceih -Drawbar: reversible, trailer coupling on both sides -Number: 1x transport trolley available -Total dimensions: 5660/2100/H610 mm -Weight: 820 kg

Condition: used, Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers Iijdpfx Aaerc Il Dscjh -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Platform: 11,000/3000/H1070 mm -Load capacity: 100 tons -Steering: double -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Wheels number: 32 pieces -Wheel Size: 646/200-480 -Total dimensions: 12,300/3000/H1070 mm -Weight: 12200kg

Condition: used, 630x4000 Iijdpfxocncghs Aaceh Under power.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 674 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 140 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 235 mm, bar diameter (max.): 42 mm, TECHNICAL DETAILS MAIN SPINDLE Iiedpfxjxlfu Ue Aacsh Max. bar diameter: 42 mm Travel: 100 mm Spindle speed: 6,000 rpm Spindle drive power: 7.5/5.5 kW Minimum C-axis resolution: 0.001 degrees SUB SPINDLE Max. bar diameter: 34 mm Spindle speed: 5,000 rpm Spindle drive power: 5.5/3.7 kW Minimum C-axis resolution: 0.001 degrees Number of turrets: 2 UPPER TURRET Number of positions: 8 Travel X: 140 mm Travel Z: 235 mm Travel Y: 70 (+/-35) mm Driven tools speed: 5,000 rpm Driven tools power: 1.0 kW LOWER TURRET Number of positions: 6 Travel X/Z: 140 / 310 mm Number of spindles: 2 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,220 x 1,460 x 1,700 mm Machine weight: 3,100 kg ELECTRICAL SUPPLY Total connected load: 30 kVA Operating Hours Machining hours: 674 h Control on hours: 4,953 h

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter: 320 mm, travel distance X-axis: 240 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 495 mm, bar passage: 51 mm, Lathe with LNS bar feeder & additional equipment! The machine has been completely inspected and geometrically measured by the seller. It is ready for immediate use! TECHNICAL DETAILS Travel X-axis: 240 mm Travel Y-axis: 100 mm Travel Z-axis: 495 mm Max. machining diameter: 320 mm Bar capacity: 51 mm Main spindle speed: 5,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 5,000 rpm Sub spindle motor power: 22 kW Iiedpfx Ajxg D Amsacoh MACHINE DETAILS Control: Mazatrol640T EQUIPMENT 2 x 12-station turrets with driven tools CNC option package EIA / ISO programming Tool eye Partition wall Automatic parts catcher with conveyor belt LNS short bar loader Quick Load Servo III High-pressure coolant 10 bar Chip conveyor Mayfran ConSep 2000 II

Condition: ready for operation (used), Year of construction: 2006, operating hours: 12,280 h, functionality: fully functional, machine/vehicle number: NL201FH1430, turning length: 510 mm, turning diameter: 356 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, TECHNICAL DETAILS Turning diameter: 356 mm Turning length: 510 mm Swing diameter: 755 mm Standard turning diameter: 275 mm Ijdpfjxhf Efsx Aacsih Bar diameter: 65 mm Travel X-axis: 260 mm Travel Z-axis: 590 mm Spindle drive: 15 kW Spindle speed: 5,000 rpm Turret stations / with drive: 12/12 Rapid traverse - longitudinal/flat: 30 m/min MACHINE DETAILS Control: MSX 850 3 Electrical Data Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Rated current: 110 A Rated spindle motor current: 131 A Total power requirement: 32 kW Dimensions & Weight Installation space: approx. 2,320 x 1,783 x 1,819 mm Machine weight: approx. 5.8 t Operating Hours Spindle hours: 12,280 h Machining hours: 13,579 h EQUIPMENT Chip conveyor Extraction unit Tool setting arm Parts catcher Double foot switch

Condition: ready for operation (used), functionality: fully functional, MACHINE DETAILS Iiodpfx Asxmgyzeacsh Weight: 14,000 kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning length: 900 mm, turning diameter: 300 mm, spindle bore: 86 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 270 mm, controller model: FANUC 31i-B, TECHNICAL DETAILS Swing diameter over bed: 780 mm Swing diameter over slide: 700 mm Maximum turning diameter: 300 mm Maximum turning length: 900 mm Bar capacity: 76 mm Spindle Chuck size (main/sub-spindle): Ø254 mm Spindle bore (main/sub-spindle): Ø86 mm Spindle speed: 4,000 rpm Spindle motor (max./continuous): 26 / 15 kW Spindle drive: integrated motor Spindle flange: A2–8 C-axis indexing: 0.001° Travel axes X1/X2 axis: 270 / 190 mm Z1/Z2 axis: 920 mm Y axis: ±120 mm Rapid traverses Rapid traverse speed X/Y/Z axes: 24 / 24 / 24 m/min Rapid traverse speed ZB axis: 12 m/min Guideway system: Box Guide Turret Tool stations: 2 × 12 Iiodpfx Ajxltbcoaceh External tool size: Ø25 mm Internal tool size: Ø40 mm Indexing time: 0.2 s/step Turret system: Wedge type Driven tools Motor power (max./continuous): 5.5 / 2.2 kW Tool speed: 4,000 rpm Collet size: Ø20 ER32 Tool type: BMT65 MACHINE DETAILS Control: FANUC 31i-B Tank and supply system Coolant tank: 230 l Lubrication tank: 8 l Electrical data Power consumption: 69 kVA Line voltage: 220 / 400 V Dimensions & weight Dimensions (L × W x H): 3,670 × 2,170 x 2,601 mm Weight: 11,000 kg EQUIPMENT LNS bar feeder

Condition: excellent (used), Year of construction: 2018, Model: Alpha 1550 XS Year: 2018 Control: FANUC Oi-TF Swing Over Bed: 554mm Swing Over Cross Slide: 370mm Swing in Gap: 830mm Distance Between Centres: 2000mm Spindle Bore: 104mm dia. Spindle Speeds: 1 to 2000 RPM Iijdpfx Ajxphwajacsh Machine with: Quick Change Toolpost Boring Bar attachment

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: Traub TX8i-S, number of slots in tool magazine: 12, Equipment: chip conveyor, TECHNICAL DETAILS Ijdpfoxlfk Nox Aacsih Bar capacity: 26 / 32 mm Max. main spindle speed: 8,000 rpm Axes: X1 / Y1 / Z1, C-axis integrated in the main spindle Turret: 1 Tool stations: 12 Drive power: 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) MACHINE DETAILS Power-on time: 116,721 h Operating hours: approx. 48,000 h Control: Traub TX8i-S DIMENSIONS & WEIGHT Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Machine weight: approx. 4,000 – 4,200 kg EQUIPMENT Chip conveyor: hinged belt, discharge height approx. 950 mm

Condition: used, Year of construction: 1996, MAZAK SUPER QUICK TURN 10 MS CNC LATHE MAKE MAZAK, MADE IN JAPAN MODEL SUPER QUICK TURM 10 MS YEAR 1996 CONTROL MAZATROL T PLUS MAX SWING 435mm SWING OVER CARRIAGE 370mm MAX. MACHINING DIA 230mm MAX. BAR WORK DIA 42mm MAX DISTANCE BETWEEN SPINDLES 705mm SPINDLE MOTOR AC11kw (15HP) SPINDLE SPEED 6000rpm 2ND SPINDLE MOTOR AC5.5kw (7.5HP) 2ND SPINDLE SPEED 6000 rpm ROTARY TOOL MOTOR AC2.2kw (3HP) ROTARY TOOL SPEED 3000 rpm TURRET TOOL CAPACITY 12 TOOLS STATIONS RAPID TRAVERSE RATE X,Z:30m/min (1180IPM),C: 400rpm MACHINE DIMENSION L x W x H, 2705mm x 1465mm x 1835mm MACHINE WEIGHT 3850kg PLUS C-AXIS SUB SPINDLE DRIVEN TOOLS (3 NO.S) PARTS CATCHER SWARF CONVEYOR TOOL SETTING PROBE COLLET CHUCK BUILT IN TRANSFORMER FULL SET OF MANUALS Iodsxnpp Ijpfx Aacoih GOOD WORKING ORDER

Condition: excellent (used), Year of construction: 2019, Model: Alpha 1460 XS Year: 2019 Swing Over Bed: 460mm Swing Over Cross Slide: 270mm Swing In Gap: 730mm Distance Between Centres: 1500mm Iodpfx Aajxphv Njcjih Spindle Speeds: To 2200 RPM (Variable) Spindle Bore: 78mm Machine With: 300mm 3 Jaw Chuck 8 Station Indexing Turret (VDI 30) Various Tooling

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 135 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 16 mm, counter spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 16, The machine is offered with an Iemca Elite 112/32 bar feeder! TECHNICAL DETAILS Machining Main spindle max. bar diameter: 16 mm Max. machining length without re-gripping: 135 mm Main spindle max. drilling diameter: 6 mm Main spindle max. thread diameter: M6 Sub spindle max. bar diameter: 16 mm Sub spindle max. drilling diameter: 5 mm Sub spindle max. thread diameter: M3 Spindles Main spindle speed: 200–8,000 rpm Sub spindle speed: 200–6,000 rpm Main spindle C-axis indexing: 1° Rapid traverse Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tools Driven tool speed: 200–4,500 rpm Max. number of tool stations: 16 Tool holder: 10 × 10 mm MACHINE DETAILS Drive capacity Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical connection Operating voltage: 200 V Frequency: 50 Hz Phases: 3 Main transformer input voltage: 400 V Main transformer output voltage: 200 V Connected load: 5.2 kVA Pneumatic connection Compressed air connection: min. 5 bar Compressed air consumption: 44 NL/min Machine data Dimensions: 1,590 × 837 × 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control Control type: CNC path control Fanuc 0i-TD Smallest input increment: 0.001 mm Smallest output increment: 0.001 mm (Z) / 0.0005 mm (X) Input modes: incremental and absolute Interface: RS232 Spindle synchronization: main and sub spindle EQUIPMENT Work area lighting Ejection and unloading device Coolant tank and central lubrication Door interlock Parts catcher and workpiece container 5 turning tool holders 10 × 10 mm Iedpfx Aajxlffyecsih Coolant system with movable jet arms Power clamping system for main and pick-off spindle