Used Planer Thicknesser U for sale (41,707)

Condition: used, Year of construction: 1988, Planing width: 860 mm, clearance height: 200 mm, minimum clearance height: 3.0 mm, bottom motor: 18.5 kW, top motor: 7.0 / 10.0 kW Storage location: Nattheim Rsdpfevvkc Aex Aa Uep

Condition: ready for operation (used), functionality: fully functional, Kupfermühle KH 30 4-Sided Planer with additional unit: horizontal working spindle with outfeed unit 4-Sided Universal Planing Machine KUPFERMÜHLE Electrical system: 400 Volt / 50 Hz ...../58.5 kW Original paint in reseda green RAL 6011 Motor power and configuration (kW): bottom 7.5 / top 11.0 / vertical right 7.5 / vertical left 11.0 5th spindle (bottom): 11.0 / feed 7.5 / thicknesser 3.0 Feed speed min/max: 5 – 30 m/min Working spindles: 5 units Extraction/Chip collection connectors: bottom 200 / top 200 / right 160 / left 160 mm / bottom 140 mm Working width min/max: 30 mm / 310 mm Working height min/max (2-sided): 15 mm / 300 mm Working height min/max (4-sided): 15 mm / 180 mm (OPTION: 250 or 300 mm) Key features: – Constant table height – Right-side guide fence – Interchangeable planer heads – Jointing device below and above – Slotted, replaceable tables for noise reduction – Outfeed unit with 2 driven rollers on top and double-guided upper section Rjdpfx Asx Ehfcoa Uop – Height adjustment synchronized with base machine Machine delivered in refurbished and tested condition, with functional warranty Further options: – New paintwork – Repainting – General overhaul etc. etc.

Condition: ready for operation (used), Year of construction: 2010, x-travel 10000 mm y-travel 1500 mm z-travel 1000 mm passage 1300 mm passage width 1500 mm control Siemens Sinumerik 840 D turning speeds 2 Stufen: 6000 U/min Number of working hours 54821 h tool taper SK 50 Boring power 120 mm thread capacity M 55 toolpiece magazine: chain magazine 30 Stück rapid traverse X-axis 36000 m/min rapid motion Y-axis 30000 m/min Redpfsx S Rx Ijx Aa Uop rapid traverse Z-axis 30000 m/min total power requirement 36 kW dimensions of the machine ca. 12 x 11 m Gantry-style milling machine with movable portal bridge and stationary clamping table. Features: • Clamping table designed with transverse clamping beams spaced 750 mm ndard panel panels are not included. Panel panels must be purchased separately if required. • Hydraulic clamping device with clamping bridges for axis machining, includinghydraulic system • Angle drilling and milling head, n = 4000 rpm SK50 • High accuracy and stability thanks to Hirth gearing • Automatic tool change in the angle head • RWP20.50-M touch probe • Pendulum operation • Safety fence with light curtains, Sick brand • Clamping table with 750 mm transverse clamping beams • 30-position tool chain magazine on the gantry frame • Machine cooling system • Integrated water-to-air heat exchanger in the control cabinet • Unisign remote diagnostics for Siemens Sinumerik 840 D • Makrolon curtains on both sides of the gantry bridge motorized height adjustment • Partition wall with viewing window • Chip conveyor with hinged belt design • Mounting and alignment elements • Documentation Accessories: 1 spare SK50 angle drill and milling head 1 spare Hexagon RWP 20.50-M touch probe 1 2500 x 1200 mm T-slot clamping frame, which can be installed on the machineinstead of the hydraulic device. Various spare parts

Condition: used, Year of construction: 1991, pressure 200 t distance between columns 1100 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1100 mm Rsdpfxovzxqrs Aa Ujp table surface area 1000 x 1000 mm pressure of drawing cushion in table 63 t stroke of drawing cushion in table 250 mm die cushion area 800 x 750 mm table height over floor 800 mm ram surface 1000 x 1000 mm Speed down 400 mm/s speed up 250 mm/s working speed 22 - 56 mm/s power requirement 45,0 kW weight 24,0 t dimensions (WxDxH) 2,4 x 1,5 x 5,9 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ram interlocking, two-hand operation as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2013, loading space length: 7,495 mm, loading space width: 2,460 mm, loading space height: 2,100 mm, loading space volume: 39 m³, Equipment: ABS, KFB Schlumbohm & Rohde Box Van with Through-loading System and Tail Lift Reference No. for inquiries: 0226176 * Body manufacturer: KFB Schlumbohm & Rohde * Type: Deichslanh Redpfsynu Nnjx Aa Uop * Tare weight: 5,240 kg * Box body * ABS * EBS * 2 axles, air suspension * Mercedes axles * Aluminium underrun protection * Disc brakes * Tail lift: Palfinger * Lifting capacity: 2,000 kg Dimensions (Cargo area/load platform) Cargo length: 7,490 mm Cargo width: 2,460 mm Cargo height: 2,100 mm Tyres: * Front axle: 385/65 R 22.5, air suspension / 50% tread * Rear axle: 385/65 R 22.5, air suspension / 35% tread ----Price: €6,900 + 19% VAT. For further questions, you can reach us at the following numbers: We speak: German, English, French, and ????? Typographical errors, mistakes, and prior sale reserved.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Control: Siemens SL Tool stations: 240 Tool holder: SK 50 Rjdpfx Aaeylikzj Ujp Number of pallets: 2 High-pressure internal coolant (IKZ) Chip conveyor Measuring probe X-axis: 1600 mm Y-axis: 1100 mm Z-axis: 1400 mm Table length: 1250 mm Table width: 1000 mm

Condition: like new (used), Year of construction: 2019, Air-operated double-acting high-pressure pump The Resato P200-100-2 is an air-operated, double-acting high-pressure pump used for pressurizing liquids in various industrial applications such as hydrostatic testing and chemical injection. The Resato P200-100-2 pump operates on the principle of an automatically reciprocating differential piston to convert compressed air into a high-pressure liquid flow. Redpoyk Uc Hefx Aa Uep Manufacturer: Resato Type: P200-100-2/U/V Type: Air-operated, double-acting high-pressure pump Air piston diameter: 200 mm Torque ratio: 100 Flow rate: 6.6 l/min Weight: 21 kg Year of manufacture: 2019 Max. outlet pressure Regulated by the air supply pressure. At 7 bar (100 psi) air pressure, the static ultimate pressure is up to 700 bar (~10,000 psi) (based on the Resato type table for P200-100-1/P200-100-2). Compatible media Suitable for water, oil, or an emulsion of both. Can also be used for a wide range of chemical fluids. Materials (wetting parts) All wetted parts are made of specially selected stainless steel. Operating Medium (Drive) Can be operated with compressed air or nitrogen at a maximum pressure of 7 bar (100 psi). Features Reduced noise, minimized downtime due to easy maintenance of seals and check valves, and prevention of pump freezing. Applications The P-Series, to which the P200-100-2 belongs, is used in various industries, including oil and gas, automotive, and research. Typical applications include: Hydrostatic testing of hoses, valves, pipes, and pressure vessels. Pressurization of hydraulic components. (Chemical) injection. Disassembly of bearings and bolt tensioning. Research and development. Find more items—new and used—in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: KNC-U 1000, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, feed length X-axis: 2,600 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, position of the milling head: 1, table width: 3,600 mm, table load: 8,000 kg, table length: 1,000 mm, table height: 930 mm, total height: 3,160 mm, total width: 5,100 mm, total length: 9,820 mm, KIHEUNG Pegasus KNC-U 1000 CNC bed milling machine with Heidenhain TNC-426 Machine condition: In good condition Manufacturer: KIHEUNG Model: Pegasus Machine type: KNC-U 1000 Year of manufacture: 1999 Travel X-axis: 2,600 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,000 mm Rodpfxsylbico Aa Usp Feed rate X-axis: 10 - 5,000 mm/min Feed rate Y-axis: 10 - 5,000 mm/min Feed rate Z-axis: 10 - 5,000 mm/min Rapid traverse X-axis: 12 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Tool holder: SK 50 DIN2080 Speed range: 0 - 4,000 rpm Table size: 3,600 x 900 mm Table working height: 930 mm Table load: 8,000 kg Dimensions: 9,820 x 5,100 x 3,160 mm Weight: 21,500 kg

Condition: used, mileage: 235,945 km, power: 129 kW (175.39 HP), first registration: 01/2015, fuel type: diesel, number of seats: 34, gearing type: mechanical, emission class: euro6, color: other, brakes: retarder, total length: 7,700 mm, total height: 3,300 mm, Year of construction: 2015, Equipment: ABS, air conditioning, cruise control, trailer coupling, = Other Options and Accessories = Redju Uua Djpfx Aa Ujp - Retarder - Webasto = Further Information = Damages: none = Company Information = We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, featuring a large parking area that serves as a showroom. We always have a wide selection of buses of all makes, capacities, models, and price ranges in stock. We can find the right coach, school, or city bus tailored to your needs and budget. All details are provided without guarantee. Subject to error, prior sale, and typographical mistakes. Opening hours for viewing used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: used, mileage: 280,433 km, power: 130 kW (176.75 HP), first registration: 12/2008, overall weight: 12,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, maximum load weight: 6,110 kg, empty load weight: 6,390 kg, wheelbase: 3,050 mm, brakes: engine braking, gearing type: mechanical, emission class: euro4, suspension: other, total length: 5,100 mm, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, differential lock, low noise, trailer coupling, Mulag mower type RMK-1200, Gmeiner Yeti 2500W spreader, year 2012, delineator post washing device, heated windscreen, hydraulic connections front and rear, front PTO. Non-binding offer – subject to change and prior sale – sold without any warranty – all information provided without guarantee! Rjdpfx Aeylvtpoa Uop

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,929 h, controller manufacturer: HEIDENHAIN, controller model: TNC 530, number of axes: 5, This 5s POSmill H 500 U was manufactured in 2017. It features a Heidenhain TNC 530 control, a 60-station tool magazine, and a KESSLER rotary table with a diameter of 500 mm. The machine includes advanced systems such as automatic coolant level monitoring and a BLUM laser tool measuring system. Consider the opportunity to buy this POSmill H 500 U vertical machining centre. Contact us for further details. • Tool magazine: 60-station, HSK-A63 • Rotary table: KESSLER rotary table, Ø 500 mm • Spindle air blast: Air through the spindle • Internal coolant supply: 20 bar, with belt filter unit • Coolant system: Automatic coolant level monitoring • Media supply: 3-channel media supply at table center • Handwheel: Mobile electronic handwheel • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch probe); workpiece measuring preparation included • Viewing: Rotation viewing window included • Collision monitoring: POS DCM collision monitoring module • Condition: Top condition • Hours: 6,929 • Accessories note: Without tool holders and without quick clamping system Additional equipment Rjdpfx Aaeyir Dxj Usp • Oil mist separator: Electromechanical • Hydraulic unit: Hydraulic aggregate, M-function controlled

Condition: ready for operation (used), Year of construction: 2001, operating hours: 16,799 h, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMC 80 U hi-dyn was manufactured in 2001. It features a rotary speed of up to 12,000 rpm, a B-axis automatic swivel milling head, and a C-axis NC rotary table measuring 900 x 630 mm. The machine includes a 60-position tool magazine, Heidenhain control system, dual pallet changer, and an internal coolant supply at 40 bar. Consider the opportunity to buy this DECKEL MAHO DMC 80 U hi-dyn universal machining centre. Contact us for more information. • B-axis automatic swivel milling head • C-axis NC rotary table: 900 x 630 mm Rsdpfex H U D Rox Aa Usp • Tool magazine: 60 positions • Heidenhain control system Additional equipment • Dual pallet changer • Coolant temperature control system • Chip conveyor • Internal coolant supply 40 bar • Paper belt filter • Rotating viewing window • Cleaning gun • Oil and emulsion mist separator Technical Specification Taper Size SK 40

Condition: used, - Dimensions : 360 x 525 x 660 mm - Système mono-saveur - Panneaux latéraux en acier inoxydable - Système de distribution par pompe - Panneau de commande avec indicateurs LED - Commandes numériques précises - 3 niveaux de consistance (onctuosité ajustable) - Capacité du réservoir : 7 litres (+ 2,3 litres dans le bac de congélation) - Refroidissement par air - Production théorique : jusqu'à 170 cornets par heure - Bac d'hygiène (non visible sur la photo = fourni lors de l'entretien) - Marque : SPM DRINK SYSTEM - Modèle : U-GO P - Distributeur français : GUSTO CONCEPT - Réfrigérant : R404A - Tension : 240 V - Puissance : 1 kW - Poids : 75 kg Rsdpsyhmlbefx Aa Uep

Condition: used, mileage: 507,000 km, power: 375 kW (509.86 HP), first registration: 02/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, * Net price * GM cab with 2 beds * ZF intarder * 2 tanks * ACC distance warning * LGS lane keeping assistant * Turning assistant * Air / air suspension * Emergency brake assistant * Hill-start assist * Cool box * Sun visor * Alloy wheels * Tires front axle: 315/60 R22.5 / rear axle: 315/60 R22.5 * MAN maintenance contract * German vehicle * Excellent condition WhatsApp: Rjdpfx Aeylrbcea Uep Errors and prior sale reserved! Sale is made without any warranty! - We speak Russian - We speak English - We speak Polish - We speak your language - We speak Spanish

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good condition, like new; the machine comes from a very small joinery and was used only very little. The machine is in its original state and has only been cleaned, with no touch-ups to the paint. You can mill slots and drill dowel holes on two levels without having to reclamp the workpiece. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 With this machine, you can mill slots, for example for lock cases and similar applications, or make all types of frame dowel joints, at right angles, butt joints, or mitred joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase manufacturing, as well as similar applications. By drilling on two levels, using the stops and indexing rails, and due to the machine’s design, dowel joints can be produced in a very short time, which makes the machine highly efficient. The machine requires a compressed air connection of 6 bar (air consumption is very low). Right-hand rotation. Mills and drills very efficiently and cleanly. Supplied with 2 angle stops (one center stop and one side stop, which can be used on either side), plus a mitre stop. On the front of the machine table, there is a 2000mm long stop rail with 2 flip stops; the stop rail can be shortened or extended if required. Workpiece clamping is done with 2 pneumatic clamping cylinders. Height adjustment between drilling levels is also pneumatic; the pneumatic switch is located at the front of the machine, ensuring rapid adjustment of the index positions and drilling levels. Equipped with a precision 12mm indexing rail, featuring a center index and 12 indices left and right. Can be quickly converted for slot milling; in this mode, the machine can be used without indexing, with 2 adjustable stops left and right, allowing for a maximum working width of 420mm. Redpfx Aajynv E Rj Uep Maximum drilling hole height: 100mm Maximum drilling depth: 150mm with stop and scale Maximum workpiece height: 160mm Everything functions perfectly. The machine is personally delivered and demonstrated by us anywhere in Germany for €220.00, so you have no risk when purchasing. Delivery to Austria and the EU is also possible on request. The machine table is 870mm wide, 140mm deep at the sides, and 350mm deep in the center. Professional equipment, not DIY store scrap. Ready for immediate operation. With 2-jaw drill chucks up to 20mm. Very stable and durable construction. The precision guides with play-free ball bearing bushings are in excellent condition and move smoothly.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Unisign Uniport 6000 Year of manufacture: 2010 / Commissioned: 2011 Control: Siemens 840 D Travel ranges: X = 10,000 mm, Y = 1,500 mm Enlarged spindle ram stroke: Z = 1,000 mm Enlarged clearance height: 1,000 mm Clearance width: 1,500 mm Main drive: 36 kW, n = 6,000 rpm, 720 Nm 2-speed gearbox, 1:4 Taper: SK 50 Machining capacity in C45: - Solid drilling D=120mm - Tapping M55 - Milling 100 cm³/min Gantry design with traversing portal bridge and stationary clamping table. Clamping table equipped with transverse clamping beams at 750 mm intervals; standard plate sections eliminated. Hydraulic clamping device with clamping bridges for axle machining, including hydraulic unit Angle drilling and milling head, n = 4,000 rpm, SK 50 Rsdpfxoymb Eae Aa Usp High accuracy and stability thanks to Hirth coupling Automatic tool change into the angle head Measuring probe RWP20.50-M Pendulum operation Safety fence with light curtains, Sick brand Clamping table with transverse clamping beams at 750 mm spacing Tool chain magazine on portal column with 30 stations Machine cooling unit Water-air heat exchanger integrated in the control cabinet Unisign remote diagnostics for Siemens Sinumerik 840 D Makrolon curtains on both sides of the portal bridge, motorized height adjustment Partition wall with viewing window Chip conveyor with hinged belt design Mounting and alignment elements included

Condition: good (used), Year of construction: 1987, functionality: fully functional, planing width: 500 mm, Working width max. 500 mm, 4-knife cutterblock, maximum thicknessing height 235 mm, feed speed 7.5/15 m/min, motor power 5.5 kW, table length 2200 mm, tables foldable. Rsdpjwv Tumsfx Aa Uep

Condition: used, Year of construction: 1999, total width: 1,260 mm, total height: 1,750 mm, Empty weight: 1.300 kg Dimensions (LxBxH): 175 x 126 x 175 cm Four-sided planer Rodpsyff Rkefx Aa Usp Griggio G18/4 Year of construction 1999 400 V, 23 kW, 47 Ampere Machine number: MC00029325 Tersa planing heads Min/max working width 25/180mm Min/max working height 7/120mm minimum workpiece length 450mm Feed speed 7 or 14m/min Spindle diameter 40mm Input table 2000mm Speed 6000 rpm 4 axles: 1st, bottom: 5.5kW 2nd/3rd, left/right: 7.5kW 4th, top: 7.5kW 3300x1600x1700mm, weight 1300kg - Year: 1999 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: MC00029325 - Deals (actions): er deal - Transport dimensions: 1750mm x 1260mm x 1750mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planer shaft diameter: 40 mm, workpiece height (max.): 120 mm, Weinig Unimat 300 — 4-sided planer 230 x 120 mm Rodpfxjydk Thj Aa Uop Although from 2005, this machine is practically like new! Rarely have we seen one so little used. Looking for an almost-new 4-spindle planer but don’t have the budget for a new one? This Unimat 300 is the perfect pick!

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE Rsdoydk Iropfx Aa Uop

Condition: ready for operation (used), functionality: fully functional, mileage: 409,922 km, power: 248 kW (337.19 HP), first registration: 03/2011, fuel type: diesel, empty load weight: 13,950 kg, maximum load weight: 13,050 kg, overall weight: 27,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, suspension: air, number of seats: 2, total length: 11,900 mm, total width: 2,600 mm, total height: 3,850 mm, loading space volume: 1,084 m³, loading space length: 9,820 mm, loading space width: 2,470 mm, loading space height: 2,410 mm, Year of construction: 2011, Equipment: ABS, AdBlue, additional headlights, air conditioning, airbag, central locking, differential lock, electric window regulation, fog lights, full service history, onboard computer, parking heater, power assisted steering, power mirror, soot filter, Model: VOLVO FM330 6x2 FRIGOBLOCK Multizone, Steering and Lift Axle, EURO 5 First registration: 07/03/2011 Mileage: 409,922 km (original) Engine power: 248 kW (330 hp) Engine displacement: 10,837 cm³ Refrigeration unit: FRIGOBLOCK Germany Type: FK 25 SL Year of manufacture: 2011 Capacity: 44.1/22.1 m³/h Charge: 8.5 kg Refrigerant: R410A Max. pressure: 42 bar M.O.P.: 4 bar, -20°C Voltage: 400 V Frequency: 50Hz Control voltage: 24V Current consumption: 24 A Additional separate batteries (total 4x batteries) 4x cooling units in the refrigerated box Interior lighting in refrigerated box 2x external Frigoblock system controls Switch for mains/generator power Zepro tail lift with remote control and 2 additional control panels Lifting capacity: 2,500 kg Air conditioning 2x fully adjustable air-suspended seats Electric windows Electrically adjustable exterior mirrors Speed limiter Sun visor Fog lights High beam Hazard warning lights Storage box VDO tachograph Work lights front and rear TCS Emission standard: EURO 5 AdBlue Wheel configuration: 6x2 Differential lock Wheelbase axle 1 to 2: Wheelbase axle 2 to 3: Tire size front (axle 1): 315/80R22.5 Tire size rear (axle 2): 315/80R22.5 Tire size rear (axle 3): 315/80R22.5 Air suspension Steering axle + lift axle Unladen weight: 13,950 kg Payload: 13,050 kg Gross vehicle weight: 27,000 kg Vehicle overall dimensions (L x H x W): 1,190 cm x 385 cm x 260 cm Body dimensions (external or internal, L x H x W): 982 cm x 241 cm x 247 cm New TÜV and emissions test available by arrangement and surcharge! You are also welcome to contact us for further information and photos via WhatsApp, Telegram, Viber, and Signal. German (Deutsch): Wir sprechen Deutsch und Englisch, aber Sie können uns gerne in Ihrer Sprache eine Nachricht schicken! English: We speak German and English, but feel free to send us a message in your language! Español: Hablamos alemán e inglés, pero no dude en enviarnos un mensaje en su idioma. Português: Falamos alemão e inglês, mas fique à vontade para nos enviar uma mensagem no seu idioma! Français: Nous parlons allemand et anglais, mais n'hésitez pas à nous envoyer un message dans votre langue ! Italiano: Parliamo tedesco e inglese, ma non esitate a inviarci un messaggio nella vostra lingua! Русский: Мы говорим на немецком и английском, но вы можете написать нам сообщение на своем языке! Trade-in possible! Price is net! We can deliver your vehicle directly to the ports of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany, as well as Antwerp/Belgium and Amsterdam. Worldwide shipping available! Export license plates available on request! We support you with export, original data confirmation for country homologation, supplier's declaration, preparation of export documents, and customs number plate procurement if required. Viewing and test drive possible at any time, including weekends, by prior telephone arrangement! Disclaimer: Rodpfxeymlt Uj Aa Ujp The buyer is obliged to independently verify the condition, dimensions, and equipment of the goods/vehicles. All information provided without guarantee. Subject to change, prior sale, and errors.

Condition: good (used), Year of construction: 2008, operating hours: 60,902 h, functionality: fully functional, machine/vehicle number: 206087, clamping force: 400 kN, screw diameter: 22 mm, displacement volume: 34 cm³, For sale is an Arburg injection moulding machine, type 270 U 400-70. The machine is fully functional and ready for immediate operation. Technical data: Year of manufacture: 08 / 2007 Auto operating hours: 60,902 h Serial number: 206087 Operating voltage: 400 V Control voltage: 230 V (~ 50 Hz) / 24 V Rated current: 82 A / 39 A Clamping force: 400 kN Tie-bar distance: 270 mm x 270 mm Injection unit: size 70 Screw diameter: 22 mm Control system: Selogica Included accessories: Rodpfx Aaoyk Tlas Uop Core pull, pneumatic needle shut-off, Selector chute

Condition: good (used), Elopak carton machine, stated by manufacturer to run at up to 12,000 cartons per hour. Built in 1997 but totally rebuilt by manufacturer in approx 2004 and used for less than two years. Redepivdiepfx Aa Ujp

Condition: good (used), functionality: fully functional, machine/vehicle number: WDB4050901V252744, mileage: 17,033 km, power: 130 kW (176.75 HP), first registration: 10/2018, fuel type: diesel, empty load weight: 7,225 kg, maximum load weight: 2,775 kg, overall weight: 10,000 kg, tire size: 425/75 R 20, tire condition: 80 %, axle configuration: 2 axles, wheelbase: 2,800 mm, next inspection (TÜV): 10/2026, fuel: diesel, brakes: engine braking, color: green, driver cabin: day cab, gearing type: hydrostat, emission class: euro6, suspension: steel, number of seats: 2, permissible axle load (axle 1): 5,200 kg, permissible axle load (axle 2): 5,500 kg, loading space volume: 1 m³, loading space length: 1,800 mm, loading space width: 2,000 mm, loading space height: 400 mm, operating hours: 994 h, Equipment: ABS, additional headlights, air conditioning, central locking, differential lock, electric window regulation, fog lights, full service history, power mirror, seat heater, soot filter, tachograph, trailer coupling, truck registration, our vehicle number: #30164 Unimog U 218 Tool Carrier Series Operating hours: 994 h Panoramic cab 2x suspension seats/heated Euro 6 Axle ratio i = 6.527 Semi-automatic transmission Split-range gearbox with working group All-wheel drive 4x4 EasyDrive (hydrostatic drive) Differential lock ABS Offroad VarioPilot (left/right changeover steering) Wheelbase: 2,800 mm Additional brake: High Performance Engine Brake Tyres: 425/75R 20 Three-way tipper Connection for tipper trailer Flatbed by Söder, LxWxH: 1,800 x 2,000 x 400 mm 2 pairs of lashing rings Rear engine PTO Front PTO Tow hitch: jaw + ball hitch Hydraulic connections front and rear Front mounting plate Type B Size V3 Rodpfx Aoymx Hhja Ujp Rear linkage SHL2500 Air conditioning Reversing alarm Electric windows, double Heated mirrors Radio/CD Fog lights Work lights 2x rotating beacons Roof bar with additional LED spotlights Heated windshield Reversing alarm Front and rear cameras Sun visor Sliding rear window Leasing or financing available on request!

Condition: excellent (used), functionality: fully functional, mileage: 501,516 km, power: 248 kW (337.19 HP), first registration: 06/2010, fuel type: diesel, empty load weight: 14,000 kg, maximum load weight: 13,000 kg, overall weight: 27,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 6,000 mm, next inspection (TÜV): 11/2026, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, loading space volume: 58 m³, loading space length: 9,800 mm, loading space width: 2,450 mm, loading space height: 2,480 mm, Year of construction: 2010, operation weight: 27,000 kg, Equipment: ABS, AdBlue, additional headlights, air conditioning, airbag, central locking, cruise control, differential lock, fog lights, hydraulics, low noise, onboard computer, parking heater, power assisted steering, retarder, seat heater, soot filter, spoiler, tail-lift, trailer coupling, Model: Volvo FM330 6x2 FRIGOBLOCK Multizone with Steering and Lift Axle First registration: 09.07.2009 Mileage: 501,516 km (original) Engine power: 248 kW (337 HP) Displacement: 10,837 cm³ Refrigeration unit: FRIGOBLOCK Germany Type: FK 25 SL Year of manufacture: 2010 Displacement: 44.1/22.1 cm³ Refrigerant quantity: 8.5 kg Refrigerant: R410A Max. pressure: 42 bar M.O.P.: 4 bar, -20°C Voltage: 400 V Frequency: 50Hz Control voltage: 24V Current consumption: 24 A V-belt 1: XPA1630 Lw V-belt 2: SPZ 1420 Lw Dividable compartments with adjustable temperatures Width left compartment: 840 cm Width middle compartment: 755 cm Width right compartment: 835 cm Additional separate batteries (total 4 batteries) 4 x refrigeration units in the insulated body Refrigerated body interior lighting 2 x external Frigoblock system controllers Switch for mains/generator power Zepro tail lift with remote control and 2 additional control units Lifting capacity: 2,500 kg Air conditioning 2 x fully adjustable air-suspended seats Electric windows Electrically adjustable exterior mirrors Speed limiter Sun visor Fog lights High beam Warning beacon Storage box VDO tachograph Work lights front and rear TCS (Traction Control System) Emission class: EURO 5 Axle configuration: 6x2 Differential lock Wheelbase axle 1 and 2: 6,000 mm Wheelbase axle 2 and 3: 1,400 mm Tyre size axle 1 (front): 315/80R22.5 Tyre size axle 2 (rear): 315/80R22.5 Tyre size axle 3 (rear): 315/80R22.5 Air suspension Steering and lift axle Unladen weight: 14,000 kg Payload: 13,000 kg Max. axle load: 16,000 kg Gross vehicle weight rating: 27,000 kg Overall vehicle dimensions (approx. L x W x H): 12.15 m x 2.6 m x 3.95 m Box interior dimensions (approx. L x W x H): 9.8 m x 2.48 m x 2.40 m With new TÜV and emissions inspection by arrangement, additional charge applies! You are welcome to contact us for further information or pictures via WhatsApp. Trade-in possible! Delivery available on request! Price is net! We can deliver your vehicle directly to the ports of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. We can arrange worldwide shipping for your vehicle! Rjdeymflwopfx Aa Usp Export license plates available on request! We assist you with export, original technical confirmation for country homologation, supplier’s declaration, preparation of export documents and customs license plate fabrication if needed. Inspection and test drive can be arranged at any time, including weekends, by prior telephone appointment! Disclaimer: The buyer is obliged to independently verify the condition, dimensions, and features of the goods/vehicles. All information is provided without guarantee. Subject to modifications, prior sale, and errors.