Used Planer Head for sale (15,538)

Condition: used, Year of construction: 2004, Manufacturer : Nova (SERAC) Model: NS 574/4 Year : 2004 Type : volumetric filling by 2 pistons Number of heads: 4 Volume : 500 to 7400 ml Hjdpfxsx R Auxe Ag Ueng Volume per mm of stroke: 18.14 ml Product: liquid / semi-liquid for flasks, bottles, cans External conveyor control Neck detection Available filling formats Filling heads available Recovery tank Drain hoses installed on photos. Power: 0.45 KW Air consumption: 140 Nm3/H at 6 bars

Condition: used, This listing is for the Labtec SciLog Tandem 1081 ChemTec Peristaltic Pump with Tandem Model 1081 Head The unit is in full working condition and is ready for immediate use Dual‑head design Equipped with two independent pump heads, allowing simultaneous delivery of two separate fluid lines or higher combined flowrate. Flow & pressure range Capable of delivering metered flow in applications like bioreactors, diafiltration, titration, and general chemical dosing. It handles pressures from 0 up to approximately 60 psi. Precise liquid metering Designed for volumetric and mass flow measurement tasks, maintaining consistency in dosing/reagent addition. Control interface Hjdpfx Aoxhfg Njg Ujng Includes an RS‑232 serial interface for external control via software or integration into automation systems Use Cases Bio‑processing & fermentation: Automated nutrient or reagent addition in tandem line setups. Filtration processes: Controlling flow through membranes in diafiltration or tangential flow filtration. Titration and pH control: Precise dosing of acids/bases based on sensor or feedback-controller inputs. General lab fluid handling: Pumping corrosive or viscous liquids safely without contamination, thanks to peristaltic tubing.

Condition: used, Year of construction: 2009, working width: 230 mm, planing height: 130 mm, We are offering this used LEADERMAC LMC-423C four-sided moulder, year of manufacture 2009. Model: LMC-423C Serial number: 0802080 Frequency: 50 Hz Voltage: 380 V Hnjdsx U Sbispfx Ag Ujg Amperage: 97.0875 A Phases: 3 Year: 2009 Tooling: Leitz If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2004, condition: good (used), Machine frame DG 104 M made of steel sheet (cutting length 6,000 mm) Profiled lifting bars Movable or automatically retractable workpiece supports Material clamping units Cross stop and head stop Exhaust connections, extraction system Timer system Roller conveyors Saw blades High-performance cutting fluid Hnsdpfx Aox Rinrsg Ujg

Condition: good (used), Planing width 610 mm Sturdy cast iron construction Edge jointing fence Auxiliary stop 4 kW, 380 Volt Hedpfx Agex U Dgde Ueng Two-knife wedge shaft Tables fold upwards Machine ready for immediate use

Condition: new, mileage: 100 km, power: 294 kW (399.73 HP), fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x4, wheelbase: 39,000 mm, fuel: diesel, fuel tank capacity: 400 l, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: parabolic leaf (spring), Year of construction: 2024, Equipment: central locking, electric window regulation, power assisted steering, = Additional options and accessories = - PTO (Power Take-Off) = Further information = General information Hnedpfxoxv Rzho Ag Ujg Year of manufacture: 2024 Intended use: Forestry Technical information Number of cylinders: 6 Transmission Transmission: MAN 16.23 DD, 16 gears, manual gearbox Axle configuration Brakes: Disc brakes Suspension: Parabolic suspension Front axle: Tire size: 385/65R22.5; Steering axle; Left tire tread: 100%; Right tire tread: 100% Rear axle 1: Tire size: 315/80R22.5; Twin tires; Left inside tread: 100%; Left outside tread: 100%; Right inside tread: 100%; Right outside tread: 100% Rear axle 2: Tire size: 315/80R22.5; Twin tires; Left inside tread: 100%; Left outside tread: 100%; Right inside tread: 100%; Right outside tread: 100% Condition General condition: Very good Technical condition: Very good Visual condition: Very good Financial information Price: On request Warranty Warranty: 12 months = Company information = See our full range at:

Condition: used, Manufacturer : Stoppil Model: EC6050 Type : Automatic linear filler   Number of heads : 6 Product : Liquid or semi-liquid Capacity : 500 ml / 5 L Hnjdpfx Agox R Atnj Uog Flowmeters : electromagnetic Tank : 316 stainless steel Poppet valve   Cylinders: inlet / outlet Collection bin Conveyor 1 additional set of heads Documentation available

Condition: used, This listing is for the Watson Marlow 313X Extension Rapid Load Pump Head Hjdsxv D Inepfx Ag Ujng The unit is in full working condition and is ready for immediate release Key Features Watson Marlow 313X Peristaltic Pump Head The Watson Marlow 313X is a robust, single-channel peristaltic pumphead known for its precision, versatility, and ease of use. Designed for lab, diagnostic, and OEM applications, the 313X features a flip-top rapid-load mechanism, allowing quick and secure tube changes while maintaining consistent flow performance. Roller Configuration: 3-roller or 4-roller Max Flow (3-Roller): Up to 2000 mL/min Max Flow (4-Roller): Up to 1200 mL/min Max Speed: 400 rpm Compatible Tubing Sizes: 0.5 to 8.0 mm ID Wall Thickness: 1.6 mm Max Continuous Pressure: Up to 2.0 bar (depends on tubing) Materials: Back: Glass-filled polypropylene Front: IXEF Rotor, Clamps, Mounting Plate: Glass-filled nylon Rollers: MoS₂-filled nylon Accepts 1.6 mm wall standard tubing Quick, error-free tube loading with flip-top design—automatically positions and tensions tubing Add up to five extension pump heads (depending on tubing type and size) Modular design—easily expand pumping capacity Durable construction with chemically resistant materials

Condition: excellent (used), machine/vehicle number: 77WSX22305E5A-135, BENZ - MONO WSX 05 - 90° angle head Mounting: HSK-A100 Collet: ER25-A (clamping range: 0.5–16 mm) Max. torque: 30 Nm Max. speed: 8,000 min⁻¹ Transmission ratio: 1:1 Hnedpfx Aeyaabgog Usg Angle head: 360° adjustable Weight: approx. 8 kg The angle head was used on a MAG HÜLLER HILLE - NBH6+ but can also be adapted or fitted to other machines.

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Hsdpfx Agexddwre Ueng Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: ready for operation (used), Year of construction: 2010, x-travel 10000 mm y-travel 1500 mm z-travel 1000 mm passage 1300 mm passage width 1500 mm control Siemens Sinumerik 840 D turning speeds 2 Stufen: 6000 U/min Number of working hours 54821 h tool taper SK 50 Boring power 120 mm thread capacity M 55 toolpiece magazine: chain magazine 30 Stück rapid traverse X-axis 36000 m/min rapid motion Y-axis 30000 m/min rapid traverse Z-axis 30000 m/min total power requirement 36 kW dimensions of the machine ca. 12 x 11 m Gantry-style milling machine with movable portal bridge and stationary clamping table. Features: • Clamping table designed with transverse clamping beams spaced 750 mm ndard panel panels are not included. Panel panels must be purchased separately if required. • Hydraulic clamping device with clamping bridges for axis machining, includinghydraulic system • Angle drilling and milling head, n = 4000 rpm SK50 • High accuracy and stability thanks to Hirth gearing • Automatic tool change in the angle head • RWP20.50-M touch probe • Pendulum operation • Safety fence with light curtains, Sick brand • Clamping table with 750 mm transverse clamping beams • 30-position tool chain magazine on the gantry frame • Machine cooling system • Integrated water-to-air heat exchanger in the control cabinet • Unisign remote diagnostics for Siemens Sinumerik 840 D Hodpfsx S Rx Iox Ag Uong • Makrolon curtains on both sides of the gantry bridge motorized height adjustment • Partition wall with viewing window • Chip conveyor with hinged belt design • Mounting and alignment elements • Documentation Accessories: 1 spare SK50 angle drill and milling head 1 spare Hexagon RWP 20.50-M touch probe 1 2500 x 1200 mm T-slot clamping frame, which can be installed on the machineinstead of the hydraulic device. Various spare parts

Condition: good (used), dividing head, dividing head, gear, gears lathe, spur gears, spur gear Hnodpex R S Axofx Ag Uog -Gears: 12 pieces -Teeth: 27 to 120 Z see photo parts list -Tooth width: 15 mm -Shaft mount: Ø 18 mm -Dimensions: see photo parts list -Shipping/Price: complete -Transport dimensions: Ø 153 x 180 mm -Weight: 5.2 kg/total

Condition: excellent (used), dividing head, dividing head, gear, gears, lathe -Gears: 18 pieces module 1.5 -Teeth: 127/120/89/78/60/58/56/48/45/44/39/38/33 -Tooth width: mm -Shaft mount: Ø 28/23 mm -Dimensions: see photo parts list Hsdjx R Sxmspfx Ag Ujng -Shipping/Price: complete -Dimensions: Ø 193 to Ø 53 mm -Weight: 14.7 kg/total

Condition: good (used), dividing head, dividing head, gear, gears lathe, spur gears, spur gear -Gears: 71 pieces module 1.5 -Teeth: 33 to 127 Z see photo parts list -Tooth width: mm -Shaft mount: Ø 28/23 mm -Dimensions: see photo parts list -Shipping/Price: complete -Transport dimensions: 550/370/H150 mm -Weight: 68 kg/total Hjdpfxox R Swij Ag Ueng

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 200 mm -Number of teeth: 12 -Indexable inserts: Carbide -Recording: SK50 -Dimensions: 200/200/H330 mm -Weight: 19 kg Hnedpfx Agsb E S I Ts Uog

Condition: good (used), cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: ZESPA NORMAX, face milling cutter head corner milling cutter -Type: Ø 100 mm -Hole: Ø 32 mm -Dimensions: Ø 100 x 45 mm Hnsdpfx Aevz T Hzsg Usg -Weight: 1.7 kg

Condition: good (used), Universal milling head, milling chuck, milling extension, angle milling head, universal angle milling head, milling angle head -Manufacturer: TOS, Universal milling angle head from TOS FB25-V milling machine -Recording output: SK50 -Recording: Input gear -Milling head: fully swivelling Hjdpjgxqt Ajfx Ag Uong -Stroke: 55 mm -Recess recording: mm -Bolt circle: mm -Transport dimensions: 780/490/H430 mm -Weight: 224 kg

Condition: good (used), Dividing head, spiral milling device, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder -Manufacturer: Stankoimport, dividing head/tool holder for tool grinding machine -Type: 36642.M1 -Parting head: rotatable/tiltable Hsdpsxfhchsfx Ag Ujng -Mounting/Dimensions: MK5 see photos -Dimensions: 300/270/H180 mm -Weight: 21.6 kg

Condition: good (used), Barrel lifter, barrel handling, barrel gripper, barrel lifter, barrel handling, barrel gripper -Drum lifter with: gripper head -Load capacity: kg -Suitable for: 1 x 200-L steel bung drums, steel lid drums, rolling hoop drums -Reception: 410 mm Hodpfx Agod Aghke Uong -Automatic opening when: setting down the barrels -Number: 2x grippers available -Price: per piece -Dimensions: 340/305/H900 mm -Weight: 47 kg

Condition: good (used), Sensor, write head, read head, read/write head -Manufacturer: Turck Blident, read/write head -Type: TNLR-Q80L400-H1147 -Voltage: 24 VDC Hjdsgpri Tspfx Ag Ujng -Dimensions: 415/80/H25 mm -Weight: 1.1 kg

Condition: good (used), Measuring probe, measuring probe, 3D probe, probe insert, measuring probe head, Digimatic Indicator, scanning head, measuring head, universal 3D probe Hodpfotu Rktox Ag Usng -Manufacturer: Garant Eroglu, scanning head -Recording: Eroglu HSK 63-08-65 -Reading accuracy: 0.01 mm -Dimensions: Ø 63 x 310 mm -Weight: 0.9 kg

Condition: good (used), Thread cutting machine, pipe thread cutter, thread cutting head, thread cutting chuck, thread chuck, thread cutting apparatus -Manufacturer: Rems, thread cutting head -Pipe size: 2 1/2 to 4 inches -Spindle bore: dimensions see pictures -Dimensions: 410/400/H340 mm Hsdpfewq Nvisx Ag Ujng -Weight: 50 kg

Condition: good (used), Multi-spindle head, multi-spindle drilling head, drilling gearbox -Multi-spindle head -Number: max. 2x drill bits/milling cutters -largest hole pattern spacing: 42 mm -Top opening: Ø 45 mm -Built-in collets: Ø 16 mm -Multi-spindle heads are variable tools -for various machining operations such as drilling, thread cutting, countersinking, reaming, -with which multiple holes can be machined at once -Dimensions: 120/110/H220 mm Hnsdpfx Agsb T Ti Eo Ueg -Weight: 5.6 kg

Condition: good (used), cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head -Type: Secodex R230.19 8250-12 -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Dimensions: Ø 300 x 60 mm Hedpeu Ribkjfx Ag Ujng -Weight: 24.1 kg

Condition: good (used), cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head -Type: Secodex R220.13/23-8160-C -Hole diameter: 40 mm / bolt circle diameter 67 x 14 mm -Dimensions: Ø 173 x 60 mm -Weight: 6.1 kg Hodpfx Aou Ria Hsg Usng