Used Planer Head for sale (10,790)

Condition: good (used), Year of construction: 1974, KAMRO thickness planer machine Model CONCORD DH5 Year of manufacture 1974 Motor 5.5 HP / 400 Volt 4-knife shaft (strip knives) Planing width 510 mm Planing height approx. 250 mm Feed speed 9 and 18 m/min. 2 table rollers Bljdpfx Ajwlfibsgzed Knife setting gauge Operating manual

Condition: good (used), Year of construction: 2007, Surface planer Model Panhans PA 51 Year of manufacture 2007 Planing width 510 mm Cutter block with 4 strip knives Feed table length 1180 mm Discharge table length 1180 mm Motor 4.0 kW / 400 V Bjdpfxewkf Hko Agzeld

Condition: used, Wobble riveting head BODMER KÜSNACHT Type FMK 3 Bsdpfx Ajglarlsgzeld Year of manufacture approx. 1980 rivet shaft diameter: max. 10 mm tool diameter: 12 mm rivet head stroke: 40 mm riveting spindle speed: approx. 1400 rpm motor power: 0,37 kW Mains connection: 380 Volt, 50 Hz - Riveting pressure adjustment infinitely variable via hydraulic pressure - Micrometer stop for stroke limitation - stroke movement via oil hydraulics (max. 45 bar) - machined flange surface Ø 115 mm with fixing nut on housing total length: approx. 800 mm weight: approx. 40 kg good condition The rivet head has a multi spindle head to set 2 or 3 rivets at the same time. This can be dismantled and used normally. For normal use the normal wobble head which holds the tool is missing.

Condition: used, Slotting head for milling machine, milling head, CCCP / UDSSR STANKO type 1502 No: 200 Year of manufacture 1974 Boded Dk A Aopfx Agzeld Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is like the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter - Degree scaling on the flange plate +/- 45° steplessly pivotable - This grooving head is flange-mounted in place of the normal vertical milling head (mounting in place of the vertical milling head, milling head) Weight: 42 kg good condition Slotting head bearing number 58166 and vertical milling head bearing number 58164 from identical STANKO milling machine.

Year of construction: 2009, condition: used, Apple 15 head depositor Blodpfx Agob Ucwkezod Model: CCP12 Stainless cantilever framed 15 head machine

Year of construction: 2008, condition: used, Apple Engineering Bljdjb Ua E Sopfx Agzod Four head pneumatic depositor Model: MD Serial: MC13611 four head depositor, individual controlled heads, on mobile height adjustable frame

Condition: used, Year of construction: 1988, Max. working width: 630 mm; Number of knives: 4 pcs; Cutterhead: Tersa cutterhead; Motor brake: Yes; Max. thicknessing height: 240 mm; Min. thicknessing height: 3 mm; Max. chip removal: 8 mm; Thickness table adjustment: electric/manual with fine adjustment; Thickness display: mechanical numerical indicator; Fixed feed speed: 6/18 m/min; Thickness table spindles: 1 large; Infeed rollers: serrated steel; Outfeed rollers: steel; Soundproofing: Yes; Approx. weight: 900 kg; Motor power: 5.5 kW; Extraction diameter: 150 mm Blodpfx Ageyq Sflezed Storage location:

Condition: new, power: 324 kW (440.52 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel, Year of construction: 2025, Equipment: air conditioning, = Further options and accessories = - Leaf spring suspension - Sleeper cab = Remarks = Fuel tank: 590 ltr. Air conditioning = Further information = Bsdswwkm Nopfx Agzeld Gearbox: MAN 16.25 OD, manual transmission Year of manufacture: 2025 Tyre size: 315/80R22.5 Suspension: leaf spring suspension Front axle: steered Number of cylinders: 6 Engine displacement: 12,419 cc = Company information = WE PROVIDE, YOU ACCELERATE Without boundaries Van Vliet is the official importer of MAN Truck & Bus SE for several African countries. Supported by comprehensive after-sales services, such as supplying spare parts and delivering (local) training.

Condition: used, x-travel 6500/13150 mm y-travel 4000 mm z-travel 1250 mm w-travel 2250 mm control Sinumerik 840 D table surface area 5500/12150 x 3000 mm distance between columns 3500 mm max. distance between table and spindle-nose 3000 mm max. workpiece weight 70000 / 105000 kg ram head dimension 480 x 510 mm spindle turning speed - stepless 6,3 - 4000 U/min milling spindle motor 63 kW max. torque on the spindle 3300 Nm tool taper DIN 39871 AD ISO 50 feed speeds X/Y/Z= 24000 mm/min total power requirement 120 kVA weight of the machine ca. 245 t dimensions of the machine ca. 29 x 7,7 x 8,1 m The Machine is in almost new condition - in 2020, it was completely retrofit and modernized for 1.6 million Euro! Equipment/accessories: - automatic tool magazine for 153 tools - automatic milling head magazine for 6 milling heads - machining modules/ milling heads: Bsdpfxswa Dx Rj Agzsld 1. machining module -straight - straight long - 2. machining module -standard angle - 4000 rpm, 144 x 2.5°, ISO 50 3. machining module -narrow angle extended -40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 4. machining module -universal index - 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5° , B-axis +/- 44 x 2.5°, ISO 50 - coolant unit - chip conveyor - technical documentation

Condition: used, Year of construction: 2001, Storage location: Supplier Bodpfjym D Eiox Agzold

Condition: new, Face milling cutter (28465) Make Widia Face Mill M 640,Type 125 B 12 RS 60 HP 06D Diameter 125 mm 12 cutting edges new and unused in opened packaging Bljdporwfpxjfx Agzjd

Condition: new, Copy and face milling head (28466) Bsdjrwfpfspfx Agzsld Make Widia Type M 100 Copy Mill D 63 OZ5 diameter 63 mm in opened original packaging

Year of construction: 2026, condition: new, functionality: fully functional, VH 3 Technical Data - Lifting arms with 3 joints, length 2140 mm (optional: 2500 mm). Pneumatic height adjustment, 6 bar compressed air connection. Lifting speed: 2 cm/sec. Max. tool weight, vertical: 50 kg. Max. tool weight, horizontal: 100 kg. WJS Tool Lifter • Improve your working conditions and protect your back. • No more heavy lifting or unnatural working postures during tool changes! • The ergonomic tool lifting device from WJS makes tool changes on planing machines significantly easier. • It doesn't matter if you want to change tools on the horizontal or vertical spindle. • The lifting device protects not only the operator but also the tool and spindle. • Tool changes become faster, saving your company costs and increasing productivity. • Whereas previously two people had to lift heavy loads, now one person can easily move the large tool weight. Ex works price. Delivery time: 10–12 weeks. 1 unit available from stock, subject to prior sale. Blsdeym Rygspfx Agzjd

Condition: ready for operation (used), Head and Return Drums Bodpfxji A Aq So Agzjld in divers diameters and Lengths

Condition: like new (used), Year of construction: 2022, x-travel 2500 mm y-travel 3500 mm z-travel 1500 mm Control HEIDENHAIN TNC 640 c-axis +-360 ° milling head -swivable ° milling head swivable ca. +-360 ° table dimension - longitudinal 2500 mm table dimension - cross 3500 mm table load 6 t/m² coolant IKZ 70 bar Feed speed 60 m/min. spindle turning speed range 24000 U/min tool taper HSK-A63 milling spindle motor S6(40%/2 min) 41 kW max. torque on the spindle S6(40%/2 min) 49 Nm milling spindle motor S1(100%/2 min) 34 kW max. torque on the spindle S1(100%/2 min) 39 kW tool change unit 60 Pos. weight of the machine ca. 74 t dimensions of the machine ca. 4 x 7.5 x 5.4 m This thermosymmetrical, ergonomic, universal ZIMMERMANN FZU32 portal milling machine is in mint condition and available immediately. DESCRIPTION: The FZU32 is a remarkably compact 5-axis portal milling machine for machining aluminium machining of aluminium, fibre composites, plastics, ureol and steel. steel. Thanks to the particularly rigid, newly developed centre-guiding gantry, we can meet the increasing requirements in model, tool and mould making. Bjdpfx Ajvwgtysgzeld mould making. This thermo-symmetrical design makes the FZU32 less susceptible to adverse environmental conditions.

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 Blodpfovwgm Hex Agzsd spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: excellent (used), Year of construction: 2003, ZSK 1 head embroidery machine Border frame Bljdpfxok E Nahs Agzed Cap frame Free arm frame 15 colors Machine is fully functional. Stitch count 350,000.

Condition: good (used), Year of construction: 2020, functionality: fully functional, Length approx. 2250 mm, width/depth approx. 1370 mm Weight approx. 695 kg, Jointer: Maximum chip removal 5 mm Extraction connection: Extraction nozzle Ø120 mm Thickness planer: Working height min. 3 mm Working height max. 240 mm Minimum workpiece length 220 mm Maximum chip removal 5 mm Drive motor power 7 kW Connection voltage 400 V Mains frequency 50 Hz Planer shaft type TERSA 4 planer knives Speed 5000 rpm Maximum planing width 520 mm Feed: Feed speeds 5/8/12/18 m/min Very good condition Bledjykaqcepfx Agzsd Available around September 2026 Shipping possible at extra cost!

Condition: used, Technical details: x-travel: 6500/13150 mm y-travel: 4000 mm z-travel: 1250 mm w-axis: 2250 mm table surface area: 5500/12150 x 3000 mm max. workpiece weight: 70.000/105.000 kg ram head dimension: 480 x 510 mm milling spindle motor: 63 kW max. torque on the spindle: 3300 Nm tool taper: DIN 39871 AD ISO 50 milling head speed: 6,3 - 4000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. distance between columns: 3500 mm passage: 3000 mm total power requirement: 120 kW weight of the machine ca.: 245 t dimensions of the machine ca.: 29,0 x 7,7 x 8,1 m The machine is in mint condition and was generally overhauled in 2020! with CNC SIEMENS 840 D autom. tool magazine for 153 tool stations Bedpfx Agswc A Shezjld autom. milling head magazine for 6 heads milling heads - straight - straight extended length - milling head -angular head standard - 4000 rpm, 144 x 2,5°, ISO 50 milling head -angular small extended length -40 kW, 4000 rpm, 1800 Nm, 144 x 2,5°, ISO 50 milling head -universal index - 40 kW, 4000 rpm, 2100 Nm, C-axis 144 x 2,5° , B-axis +/- 44 x 2,5°, ISO 50 coolant attachment, chip conveyor *

Condition: used, Year of construction: 1991, x-travel 6200 mm y-travel 1500 mm z-travel 508 mm Control Mazatrol type M 32 workpiece height 708 mm Tool changer 60 spindle taper ISO 50 table surface area 6200x750 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Bodpoyqvdrsfx Agzsld than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2007, x-travel 3000 mm y-travel 2500 mm z-travel 1000 mm Control Siemens type Sinumerik 840 D Feed 5-30.000 mm/min Table area 2000x2170 mm table load 1500 Kg/m² T-slots 22 H9 distance between uprigths 2500 mm spindle turning speed range 6000 U/min spindle drive 36 kW spindle taper HSK 100 Tool changer 30 Rotary table 2000 mm Blsdpfsyqu D Dsx Agzjd speeds 250 U/min turning diameter 2500 mm table load 10 t Torque 33000 Nm weight of the machine ca. 45 t dimensions of the machine ca. 8x6,4x4,4 m Gentry gantry milling machine with carousel rotary table Head change station Tool changer The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Used Weinig A510 surface planer Year of manufacture: ~1970 Manufacturer: Weinig Model: A 510 Bodpfxsylwdij Agzjld Working width: 510 mm Table length: 2500 mm 2-knife cutterblock Star-delta starter Extraction connection: Ø 120 mm Weight: approx. 800 kg Dimensions (LxWxH): approx. 250 x 95 x 110 cm

Condition: used, Year of construction: 1988, Planing width: 860 mm, clearance height: 200 mm, minimum clearance height: 3.0 mm, bottom motor: 18.5 kW, top motor: 7.0 / 10.0 kW Bedevvkc Aepfx Agzjld Storage location: Nattheim

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, WALTER TYPE: TANIH320EVO Year of manufacture: 2014 Bsdpsyllx Iefx Agzjld Faceplate diameter: 500 mm

Condition: ready for operation (used), functionality: fully functional, Kupfermühle KH 30 4-Sided Planer with additional unit: horizontal working spindle with outfeed unit 4-Sided Universal Planing Machine KUPFERMÜHLE Electrical system: 400 Volt / 50 Hz ...../58.5 kW Original paint in reseda green RAL 6011 Motor power and configuration (kW): bottom 7.5 / top 11.0 / vertical right 7.5 / vertical left 11.0 5th spindle (bottom): 11.0 / feed 7.5 / thicknesser 3.0 Feed speed min/max: 5 – 30 m/min Working spindles: 5 units Extraction/Chip collection connectors: bottom 200 / top 200 / right 160 / left 160 mm / bottom 140 mm Working width min/max: 30 mm / 310 mm Working height min/max (2-sided): 15 mm / 300 mm Working height min/max (4-sided): 15 mm / 180 mm (OPTION: 250 or 300 mm) Key features: – Constant table height – Right-side guide fence – Interchangeable planer heads – Jointing device below and above Bsdpfsx Ehfcjx Agzeld – Slotted, replaceable tables for noise reduction – Outfeed unit with 2 driven rollers on top and double-guided upper section – Height adjustment synchronized with base machine Machine delivered in refurbished and tested condition, with functional warranty Further options: – New paintwork – Repainting – General overhaul etc. etc.