Used Pickling Injector for sale (154)

Condition: used, This listing is for a Varian 3900 GC With FID and 1041 Packed Injector The Varian 3900 gas chromatograph (GC) is designed to meet the demands of the analytical laboratory with its compact design—GC occupies less than half the workspace of the average gas chromatograph unit. Models 39001-00 and -05 feature an icon-based keypad which simplifies training and increases daily productivity. Select one of six pre-programmed languages for further ease-of-use. Password protection locks keypad from unauthorized access. Each Varian 3900 GC unit features a front access column compact oven with Precise Temperture Control which uses standard 7" (17.5 cm) diameter capillary columns. Maximum operating temperature is 450°C—accommodates any application. Plus, the oven cools down from 450°C to 50°C in only 5.2 minutes! Dimensions and Weight Size: 21.8 in./55 cm (h) x12.5 in./32 cm (w) x 22 in./56 cm (d) Weight: 59 lbs/26.8 kg Equipment can be serviced/renovated/refurbished on request at extra cost. Was previously used with a Perkin Elmer HS40XL Godpfx Aexzh A Hehmebr

Condition: new, Jensen Batch Washer 5 pieces: Valve flange seal, drain valve Jensen 700237382 Gsdoy Uih Tepfx Ahmobr 8 pieces: Seal for steam injector, 370x140x4 2 pieces: Seal, steam injector 9005220191

Condition: used, Year of construction: 2008, power: 226 kW (307.27 HP), gearing type: other, fuel type: diesel, first registration: 01/2008, mileage: 133,000 km, driver cabin: other, emission class: euro4, Vehicle location: Bovenden, environmental badge green Godpfx Aevhhnaehmsbr approx. 133,000 km run, Torque Reduction: TR40, Prop. Version: 21042761, Max. Torque: 1.530 Nm, Rated Power: 226 KW, Rated Power Speed: 1.900 rpm, Displace Ment. 9,4 liter, Lowible 590-710 rpm, Injector Type: E3-1, Exhaust Brake. VEB ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, Year of construction: 2024, functionality: fully functional, Price for the purchase of a powder coating system – Negotiable!! • Electrical data: 100-240V 50-60Hz • Powder feed rate up to: 200g / min Gbsdpog U I Ugofx Ahmor • Air consumption up to: 250L / min at 6 bar • Air quality / moisture: less than 1.3 g / nm3 • Air quality / oil: less than 0.1 mg / nm3 Data for the powder coating gun • Output voltage: 100 kV • Max. output current: 100 µA • Hose length: 6 m - antistatic hose • Polarity: Negative • Conformity: ATEX 2mJ Description • Applicator for quick color changes, ready to use out of the box • Intuitive 7" touch display • Automatic cleaning function – gun flushing • Up to 20 user-defined programs • 3 automatic programs • Remote control of paint quantity and program change from the handle Equipment • Controller of the PSS series • ProfiJector RI-1 blunt powder injector • ProfiGun powder gun with quick coupling and remote control • Set of hoses • Stand with vibrator and extraction unit with fluidization PSS driver • 7-inch touch panel, operable with gloves • 3 automatic programs (overcoating, hard-to-reach areas, flat surfaces) • Graduation in 0.1kV and 0.1uA steps • Advanced pneumatic valves for air flow control (romer - patent pending) • Actual air flow measurement responds to errors such as pressure drops or system blockages • Extended diagnostic tools • Possibility to name programs • Possibility to control external master controllers with ModBus protocol (A series) ProfiGun PM-1 gun • A lightweight ergonomic gun, perfectly balanced with a contoured handle • The ceramic cascade with a voltage of up to 100,000V efficiently charges all types of powders • The new nozzle generation ensures perfect powder penetration into complex shapes • The profiled nut provides a good grip • The conductive handle with a high carbon content offers excellent grounding for the painter • The spray gun is made of special materials with increased impact resistance • Fully disassemblable design with a replaceable powder path tube • The spray gun is patented in the USA and the EU • Cascade polarity - negative ProfiJector powder coating pump Description • Design of a new efficient injector • The most effective feed angle, proven by research • Saves paint and air compared to injectors with a right angle • Compared to other pumps, it is characterized by relatively low operating costs • The injector is covered by a European patent

Year of construction: 2025, condition: new, The IPW 100 tank pasteurizer is ideal for pasteurizing packaged fruit preparations (such as jams and preserves), fermented products (such as vinegar and beer), and pickled fruits and vegetables. The packaging must be heat-resistant, for example, made of glass or a heat-resistant plastic bag. The exact temperature and duration of the heat treatment depend on the specific product. It is operated manually. The tank is not insulated. Gbjdpfx Ajv Srabohmor • Very user-friendly • Includes baskets for bottles and jars • Automatic temperature control • Made entirely of stainless steel (WNr. 1.4301) Technical information Capacity: 100 L/h Power requirement: 9 kW, 400 V, 16 A Material: WNr. 1.4301, AISI 304 stainless steel IP65 electrical control box Thermometers: 1 pc. Dimensions: Length: 1170 mm Width: 530 mm Height: 870 mm Weight: 75 kg

Year of construction: 2025, condition: new, The IPW 200 tank pasteurizer is suitable for pasteurizing packaged fruit preparations (such as jams and preserves), fermented products (such as vinegar and beer), and pickled fruits and vegetables. The packaging must be heat-resistant, e.g., made of glass or a heat-resistant plastic bag. The exact heat treatment technology, temperature, and duration depend on the specific product. Operation is manual. The tank is not insulated. Gbodpov Srbljfx Ahmor • Very user-friendly • Includes baskets for bottles and jars • Automatic temperature control • Made entirely of stainless steel (WNr. 1.4301) Technical information Capacity: 200 L/h Power requirement: 12 kW, 400 V, 20 A Material: WNr. 1.4301, AISI 304 stainless steel IP65 electrical control box Thermometers: 1 pc. Dimensions: Length: 1420 mm Width: 600 mm Height: 880 mm Weight: 130 kg

Condition: used, mileage: 849,701 km, power: 165 kW (224.34 HP), first registration: 01/1992, fuel type: diesel, number of seats: 37, gearing type: mechanical, Equipment: ABS, air conditioning, bathroom, onboard kitchen, parking heater, * Our internal ref.: 1179 * MB O 303 - 9 R (German registration) – very rare vehicle (9 R with A/C, ...) * Second German owner * A I R C O N D I T I O N I N G * Transfer journey (approx. 350 km) completed without any problems or incidents * ABS and ASR * 18 standing places for regular service * Vehicle was deregistered only in March 2026! * Inspected for 100 km/h operation * Onboard WC * Onboard kitchen * Vehicle was refurbished by the previous owner, which explains its current condition. * Vehicle is wrapped/covered with company advertising. Gbedpfxjy A A Shs Ahmor * The original steering wheel is in the luggage compartment. * Additional seats are present/loose, located in the luggage compartment. * Various invoices are available: * Brake drums renewed in 2018 * Air suspension valve * Gearbox replaced * Engine mount 06/2023 * Supply sender 06/2023 * Injector nozzle 03/2020 * Manual gearbox removed / clutch bell housing / replacement gearbox / release bearing and driven plate replaced 03/2020 * Propshaft coupling replaced MB 09/2023 * Removal and installation of wheelset 09/2023 * Vehicle drives very well! * Vehicle has signs of rust * Note: The client is obligated to independently verify the condition and features of the vehicle/goods! All information provided without guarantee. Subject to prior sale. Please refer to our terms and conditions.

Condition: used, overall weight: 69,000 kg, Year of construction: 2007, operating hours: 9,379 h, Engine: Isuzu, 6 cylinders, 345 kW – AH-6WG1X – EPA and CE compliant Boom: 6.58 m Stick: 3 m Ground plates: 650 mm All hydraulic lines (hammer/grapple and rotation) Hydraulic quick coupler: OIL Quick OQ90 or Lehnhoff HS80 Deep digging bucket – 4.55 m³ SAE Transport weight: 69 tons Transport width: 3.93 m Working width (4.14 m with outriggers) Transport height: 4.37 m The machine has been overhauled and repaired in our workshop. Report available upon request. Major inspection performed: All oils and filters replaced, including 650 liters of hydraulic oil. CASE Germany, March 2026: The engine has 6 new fuel injectors (invoice available upon request). Gbedeul U H Tjpfx Ahmer

Condition: excellent (used), mileage: 799,500 km, power: 301 kW (409.25 HP), first registration: 09/1996, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 400 l, color: blue, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 1996, Equipment: ABS, air conditioning, differential lock, parking heater, power mirror, = Additional Options and Accessories = - 430-litre diesel tank - Aluminium fuel tank - Heated mirrors - Driver’s comfort seat - Differential lock - Differential lock - Speed limiter - Hydraulic system - Tipping hydraulics - Air-suspended seats - Hub reduction - Radio/CD player - Sun visor - Auxiliary heater - PTO (Power Take-Off) - PTO (Power Take-Off) - ZF16 manual gearbox = Notes = NICE CONDITION HEAVY DUTY M.A.N. 26.403DFT SLEEPER CAB 6x4 TRACTOR UNIT, REDUCTION AXLES & ZF MANUAL GEARBOX, HYDRAULIC KIT & AIR CONDITIONING!! Gjdpeymqm Tofx Ahmebr 400 HP, EURO 2, 6-CYLINDER ENGINE (NO ELECTRONICS, MECHANICAL PUMP & INJECTORS)!! ZF MANUAL GEARBOX!! REDUCTION AXLES!! P.T.O.!! HYDRAULIC KIT!! SLIDING FIFTH WHEEL!! AIR CONDITIONING!! ETC.!! TRUCK IS IN GOOD DRIVING CONDITION, READY FOR HEAVY TRANSPORT JOBS!! MORE M.A.N. 4x2 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US – WE ARE A ONE-STOP SHOP COMPANY!! YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,816 cc Transmission Gearbox: ZF16 manual transmission, 16 gears, manual shift Axle Configuration Tyre size: 315/80R22.5 Front axle: Max. axle load: 7,500 kg; Steering axle; Left tyre tread: 40%; Right tyre tread: 40%; Brakes: disc brakes; Suspension: leaf suspension Rear axle 1: Twin tyres; Differential lock; Max. axle load: 13,000 kg; Left inner tread: 20%; Left outer tread: 20%; Right inner tread: 20%; Right outer tread: 20%; Reduction: outboard planetary axles; Brakes: drum brakes; Suspension: air suspension Rear axle 2: Twin tyres; Differential lock; Max. axle load: 13,000 kg; Left inner tread: 20%; Left outer tread: 20%; Right inner tread: 20%; Right outer tread: 20%; Reduction: outboard planetary axles; Brakes: drum brakes; Suspension: air suspension Weights Kerb weight: 9,000 kg Payload: 17,000 kg Gross vehicle weight: 26,000 kg Functional Load compartment capacity: 400 l Loading height: 130 cm Condition Technical condition: very good Optical condition: very good Further information Please contact Sales Department or Erik Engel for further details.

Condition: excellent (used), mileage: 999,990 km, first registration: 08/1997, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 620 l, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 1997, Equipment: ABS, air conditioning, differential lock, electric window regulation, spoiler, = Additional options and equipment = - 2 bunks - 600-liter diesel tank - Heated exterior mirrors - Comfort driver's seat - Roof spoiler - Speed limiter - Radio/CD player - Sleeper cab - Sun visor - ZF16 manual transmission = Notes = GOOD CONDITION DAF FT95-380XF SPACECAB 4x2 TRACTOR UNIT (EURO 2) WITH ZF16 MANUAL GEARBOX, ROOF SPOILER & AIR CONDITIONING!! 380HP, EURO 2 (MECHANICAL PUMP AND INJECTORS)!! ZF16 MANUAL GEARBOX!! 620-LITER DIESEL TANK!! AIR CONDITIONING!! SPOILER ON CABIN!! ETC!! TRUCK IS IN GOOD DRIVING CONDITION, READY FOR THE HEAVY JOBS!! Gbedpfx Ajx H Sr Sjhmor MORE DAF CF/XF 4x2 / 6x2 / 6x4 / 8x4 (EURO 2/3/4/5/6) IN STOCK FOR SALE!!

Condition: excellent (used), mileage: 77,200 km, power: 180 kW (244.73 HP), first registration: 05/1989, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 400 l, color: yellow, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro1, suspension: steel, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 1989, Equipment: differential lock, = Additional Options and Accessories = - 8-speed manual gearbox - 400-liter diesel tank - Heated mirrors - Full leaf suspension - Differential lock - Differential lock - Speed limiter - Battery master switch - Hydraulic system - Hub reduction axles - Radio/CD player - Power Take-Off (PTO) - Power Take-Off (PTO) = Remarks = HEAVY DUTY M.A.N. 26.240DFT DAYCAB 6x4 FULL STEEL SUSPENSION TRACTOR UNIT, REDUCTION AXLES & ZF MANUAL GEARBOX!! 240HP, EURO 1, 6-CYLINDER ENGINE (NO ELECTRONICS, MECHANICAL FUEL PUMP & INJECTORS)!! ZF MANUAL GEARBOX!! FULL STEEL SUSPENSION!! REDUCTION AXLES!! P.T.O.!! HYDRAULIC KIT!! ETC.!! TRUCK IS IN GOOD DRIVING CONDITION, READY FOR HEAVY TRANSPORT JOBS!! MORE M.A.N. 4x2 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS AVAILABLE FROM STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPPING, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! () ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 11,967 cc Transmission Gearbox: ZF 8-speed manual gearbox Axle configuration Brakes: Drum brakes Suspension: Leaf suspension Front axle: Tire dimension: 315/80R22.5; Max. axle load: 7,500 kg; Steered; Left tire tread: 20%; Right tire tread: 20% Rear axle 1: Tire dimension: 11R20; Twin tires; Differential lock; Max. axle load: 13,000 kg; Left inner tread: 20%; Left outer tread: 20%; Right inner tread: 20%; Right outer tread: 20%; Hub reduction: Outer planetary axles Rear axle 2: Tire dimension: 11R20; Twin tires; Differential lock; Max. axle load: 13,000 kg; Left inner tread: 20%; Left outer tread: 20%; Right inner tread: 20%; Right outer tread: 20%; Hub reduction: Outer planetary axles Weights Curb weight: 9,000 kg Payload: 17,000 kg Gross vehicle weight: 26,000 kg Gjdpfox N Sw Tjx Ahmobr Operational Cargo area capacity: 400 l Superstructure brand: ZF Loading platform height: 130 cm Condition Technical condition: very good Visual condition: good Further information Please contact Sales Department or Erik Engel for more information.

Condition: used, mileage: 167,240 km, power: 120 kW (163.15 HP), first registration: 10/2014, fuel type: diesel, number of seats: 17, gearing type: automatic, emission class: euro6, color: blue, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1039 * MB Sprinter 516 * ORIGINAL EVOBUS - TRAVEL 65 * 120 kW / 160 HP – EURO 6 * Automatic transmission * LOW MILEAGE * TELMA retarder * Cruise control * Luggage compartment * Panoramic glazing * 15+1+1 passenger seats: LUX line seating * ALL SEATS EQUIPPED WITH 3-POINT SEAT BELTS * Adjustable seats (recline function) * Passenger compartment air conditioning * Separate driver’s climate control * Armrests * Tables with cup holders * Footrests * Luggage nets * Convector heating * Auxiliary heater * Parking heater * Reversing camera * One table installed * Overhead luggage racks * Reading lights * New windscreen * Large luggage compartment Gbedpfxsxc Sfze Ahmer * Power outlet in the bus * Refrigerator * Repairs in January 2026: * New injectors for AdBlue * Propshaft renewed * etc. * All information without guarantee * Interim sale reserved * Please refer to our Terms and Conditions

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CO2-1125-5000, 1x Vacuum Belt Filter Completely constructed in stainless steel 1.4404/1.4571, grates in stainless steel 1.4301 Finish: pickled and passivated Including: 1x drive roller 508x1427 1x steering roller 88.9x1850 6x support/tension rollers 88.9x1850 1x VBF frame 1x VBF hood frame 1x safety grilles (1.4301) 2x spray pipes, each fitted with 12 nozzles 6x hood brackets for vacuum tube 1x mounting materials, incl. gaskets 1x holder for control valve and paddle 2x slide blocks for tension roller HMPE100 2x bearing blocks for scraper blade HMPE100 1x scraper blade HMPE100 1x drive SEW KH87/T R57 DRN90L4TF 2x bellows d100 wbz 100-E1 2x misalignment switches Gsdpfxexfvahj Ahmjbr 2x emergency stop switches 2x emergency stop cords 1x pressure reducer 1x hose and coupling for connection to bellows 23x nozzle holders 23x nozzles 4x rubber seals for wash cabinet 1x rubber seal for suspension conveyor 2x double wash gutters

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 43,000 mm, total height: 3,800 mm, total width: 20,000 mm, type of input current: three-phase, workpiece weight (max.): 200 kg, compressed air connection: 9 bar, workpiece height (max.): 2,400 mm, workpiece length (max.): 7,200 mm, We are offering this BEWAP MACRO 6 POWDER COATING MACHINE – Complete Powder Coating Line 7.2 m, year of manufacture 2015, in very good condition. Complete setup for surface treatment, including 2 powder coating booths and 2 curing ovens for powder coating applications. Machine in perfect working order. Year 2015. Surface Treatment Booth (made of 316 L stainless steel, membrane spray pumps, dosing pumps, stainless steel pickling tanks with immersion heaters, rinse tanks, effluent tank, dosing pumps, reverse osmosis unit, water softener) Drying oven (gas burner, control cabinet) 2 manual powder coating booths with automatic feed and extraction Curing oven (gas burner, control cabinet) Structure with manual overhead conveyor: 3 transfer trolleys with 3 lifting beams (200 kg per beam) 2 lift stations for loading and unloading parts 36 lifting beams in total Operation with 3 beams simultaneously Compatible with Qualicoat and Qualilaquage certification Maximum part dimensions per lifting beam: Maximum part length: 7200 mm Maximum part height: 2400 mm Maximum part width: 500 mm (configuration for 1000 mm width possible) The line is to be dismantled and removed on site Price: €150,000 (excl. VAT) Gbsdpfoyc S Htex Ahmer If you have any questions or need further information, please do not hesitate to send us a message or call us. Viewing is possible.

Condition: new, table width 1500 mm table length 3000 mm burner heads 1 Control CNC CNC plasma cutting system *NEW - AVAILABLE FROM STOCK* Furnishing: Cutting area 1,525 x 3,050mm Gbsdpfx Aeiid Hwohmsr Consisting of guiding machine, CNC control Plasma torch holder incl. torch height control, incl. Radio remote control and cross-laser for positioning, 1 license FastCAM programming software with Auto Nest Function and DXF,DWG import. Autogen set consisting of gas control solenoid valve, injector Machine torch torch holder, capacitive Height control, cutting range 10 - 50 mm plasma system Hypertherm Powermax 85 Sync CPC System Cutting range 1 - 20mm, cutting gas air Machine torch Smartsync 180° - 15.2 meters Machine is offered ex works. Without accessories (dye, anti-rust, aint mushroom, etc.) - further costs on request!

Condition: used, Spare parts for shot blasting machine or impeller wheel, Gutmann Type: AGS SWL 501 Gbsdpebfkbbsfx Ahmjr Impeller blades, impeller wheel housing, injector, impeller wheel, elevator cups, wear plates, etc. NEW!

Condition: used, Year of construction: 1992, The CO2 target value is entered on the digital controller, causing the CO2 metering valve to open accordingly. The CO2 is introduced into the product stream via an injector and then dissolved and bound in the saturation section. The amount of CO2 in the beverage is monitored by a CO2 analyser and computer. The actual value is automatically compared with the target value and corrected via the CO2 valve if necessary. A CO2 recorder records the actual value. Gbedpfxsxzqufj Ahmer Additional title: impregnation plant Capacity: 20000 l/h Final CO2 content value (operating value) up to: 7 g/l Material: stainless steel Features: CO2 injection; settling section; control cabinet with user interface for CO2 control and CO2 recorder; various pipes, valves, measurement technology

Condition: used, Year of construction: 1994, Three-stage water degassing system for water degassing and CO2 impregnation. The raw water enters the first degassing tank through an injector nozzle. The high flow velocity causes oxygen and nitrogen to be torn out of the water jet and escape from the top of the tank. This process is repeated in the second degassing tank. In the third tank (impregnation tank), after entering through the injector nozzle, the water is mixed with the CO2 pressure in the upper part of the tank, which is under impregnation pressure. Additional title: multi-stage cold deaeration with impregnation Gbjdpfx Aexzqt Ishmsr Base construction: mounted on stainless steel frame Features: 3 containers (each with pressure gauge); 3 centrifugal pumps; control cabinet with control panel; pipes with various fittings

Condition: used, The Fomaco FGM 64 SC Injection Machine is manufactured by the Danish company Fomaco. The FGM 64 SC model features a robust, industry-proven multi-head injection machine design, engineered for the precise and uniform injection of brine or marinade into meat products. Gbedpfezlrfasx Ahmsr Technical specifications: Manufacturer: Fomaco Model: FGM 64 S Year of manufacture: 2003 Number of needles: 128 needles (32 needles in 4 rows) Needle thickness: 3 mm Power supply: 3 x 400 V / 50 Hz Rated / maximum current: 23 A / max 35 A Operating pressure: 6 bar Dimensions: 1700 x 1700 x height 2500 mm How does the Fomaco FGM 64 SC injector work? Fomaco injection machines operate using a system of electronically controlled valves that deliver brine directly to the product via a precise needle array—the company refers to this approach as the “pump-to-product” system, which maintains constant fluid pressure and eliminates unevenness in brine distribution. As a result, the injection is uniform regardless of the size and shape of individual pieces of raw material, which translates to higher, repeatable yield and the absence of under- or over-cured areas in a production batch. The FGM 64 SC injection head is equipped with 32 needles arranged in 4 rows—a total of 128 needles, each 3 mm thick—which, at low operating pressure, allows for gentle yet precise brine injection without excessively disrupting the meat’s tissue structure. The head’s design also allows for quick removal of the needle cassette, which significantly reduces cleaning time and ensures production hygiene. Key advantages of the Fomaco FGM 64 SC injector Injectors from this brand are valued above all for process repeatability and operational stability even under demanding production conditions—Fomaco designs its machines to perform “under extreme production conditions,” which directly translates to reliability in the day-to-day operations of a processing plant. The precise injection system ensures uniform distribution of salt and other brine ingredients throughout the entire batch of raw material, which is particularly important in the production of cured meats, hams, pork shanks, and marinated poultry products, where the uniformity of curing directly affects the quality, flavor, and shelf life of the finished product. As a result, producers can count on a higher and more predictable final yield. Applications of the Fomaco FGM 64 SC Injection Machine The Fomaco FGM 64 SC injection machine is used in the processing of red meat, poultry, and fish—anywhere where the uniform and controlled introduction of brine or marinade into the raw material is of critical importance. The machine is well-suited for both the production of classic cured meats and hams, as well as for lines focused on marinating poultry portions or fish fillets, where gentle handling of the raw material and a high, consistent yield are essential.

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, Schröder injector with 40 needles, workshop tested, functioning Gbedpfx Ahoyi Sggomjr

Condition: reconditioned (used), Year of construction: 1997, machine/vehicle number: 06143797, Schröder 61 Needle injector Year of construction 1997 Suitable for meat with bone and fresh meat Gsdpjrw Arasfx Ahmjbr 60 cycles per minute with 40mm advance per stroke Hourly capacity 3000 KG

Year of construction: 2001, condition: used, functionality: fully functional, Perfect condition including price: - Onion (any type) & Garlic Peeler - Unpeeled product hopper - Transportation conveyor (for peeled product, waste, inspection table with platform) All equipment is fully made of stainless steel. I also have a large number of spare parts available at an additional cost. A new Tecnoceam Peeler 255 (machine only, without other equipment) costs nearly €200,000! Automatic Air Peeling Machine for Garlic and Onions – PAC 255 (995) This machine is suitable for peeling a wide variety of onions (spherical, elongated, or flat), shallots, and ginned garlic cloves, intended for the fresh produce market, freezing, or preserved products (in oil/pickles, sauces, etc.). ADVANTAGES: • Uniform and gentle peeling process • High flexibility, especially for handling a wide range of onion shapes and sizes • Durable abrasive parts with quick changeover of peeling elements • Wide selection of peeling nets available for different product calibers • Fully automated and customizable continuous operation; control panel allows adjustment of loading time (inserted quantity) and process time (peeling cycle duration) • Easy access to internal components for cleaning and maintenance • Convertible from onion peeler to garlic peeler and vice versa • Suitable for integration in multiple lines (e.g., 2/3 model 255(995) machines in series) Approximate output: Gbjdsy I Dlmspfx Ahmor Onions: 400–900 kg/h (depending on size, see brochure) Garlic: 200–300 kg/h Overall dimensions: 3,200 x 1,700 x H 2,300 mm (including automatic feed elevator) Product size range: Min. diameter: 25 mm; Max. diameter: 100 mm; Max. stem length: 30 mm Peeling cycle duration: 1–2 minutes

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For sale: a brining injector from Günther Type: PI 26 M including filter system GRF 200 K Year of manufacture: 2015 Capacity: approx. 500 – 800 kg/h Stroke rate [strokes/min]: 10-60 strokes Passage diameter: 210 mm Belt length: 1100 mm Equipped with 26 needles, needle thickness (standard) approx. 4.0 mm Gbsdpfsy Uwr Tsx Ahmer The injection volume can be continuously adjusted from 2 to 25% The machine is in very good condition and ready for immediate use.

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE15 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. Similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Gbsdpehf Na Sjfx Ahmer Available models: ----- CE15-series L/min CE15-150 bar 40 15 hp water blaster unit 50Hz CE15-150 bar 40 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 35 15 hp water blaster unit 50Hz CE15-170 bar 42 15 hp water blaster unit 60Hz CE15-170 bar 35 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 42 15 hp water blaster unit 60Hz with start/stop CE15-200 bar 30 15 hp water blaster unit 50Hz CE15-200 bar 36 15 hp water blaster unit 60Hz CE15-200 bar 30 15 hp water blaster unit 50Hz with start/stop CE15-200 bar 36 15 hp water blaster unit 60Hz with start/stop CE15-300 bar 18 15 hp water blaster unit 50Hz CE15-300 bar 22 15 hp water blaster unit 60Hz CE15-300 bar 18 15 hp water blaster unit 50Hz with start/stop CE15-300 bar 22 15 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 11.2 kW (50Hz) / 13 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Includes standard accessories.

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE10 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. It is similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- Gbjdpfxshf Na Ie Ahmer CE10-series L/min CE10-200 bar 21 10 hp water blaster unit 50Hz CE10-200 bar 25 10 hp water blaster unit 60Hz CE10-200 bar 21 10 hp water blaster unit 50Hz with start/stop CE10-200 bar 25 10 hp water blaster unit 60Hz with start/stop CE10-250 bar 15 10 hp water blaster unit 50Hz CE10-250 bar 18 10 hp water blaster unit 60Hz CE10-250 bar 15 10 hp water blaster unit 50Hz with start/stop CE10-250 bar 18 10 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 7.5 kW (50Hz) / 9 kW (60Hz) Voltage: 400V (50Hz) - 440V (60Hz) Amps: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.