Used Pickling Injector for sale (189)

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Total installed power: Kw 99 N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) Kdjdpfx Asgwbbqsg Ueg N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels OPTIONAL: WIRELESS BAR CODE SCANNER

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: O03009A) THROUGH-FEED MULTI-BORER “BIESSE” Techno Logic with CNC Kdsdpfx Agew Uhbkj Ueg No. 2 through-feed motorised belts, feeding speed up to 75 m/min No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), No. 5 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) No. 5 top pressing devices No. 2 endless screws to evacuate the wastes. Numerical Control Type CNI O03009B) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno INFOR a C.N. No. 2 through-feed motorised belts, feeding speed up to 75 m/min No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) No. 2 Top pressing devices No. 2 endless screws to evacuate the wastes.

Condition: excellent (used), Electronic Programmer NC 400 Software Biesse Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Dowels inserting nozzles (and Glue Injectors) N. 5+5 Max. working width (mm) 3200 Min. working width (mm) 235 Kdedjd Nuwispfx Ag Ueg Bottom vertical units/supports (N°) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 Vertical top pressure clamps (N°) 2 Motorized endless screws to evacuate wastes/chips (N°) 2 Motorized carpet to evacuate chips and wastes The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: excellent (used), Double-sided machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting - Electronic Programmer "CNI" NC 400 - Built-in command and electric cabinet - Max. distance between the horizontal heads mm 3200 approx - Movable and adjustable right side of the machine (according to the width of the panels) Kdjdpfx Agsw Ug A He Ueg - No. 2 motorized conveyoring belts (HP 0.25 x 2 motors) - No. 1+1 dowels storage tanks for the automatic feeding to the nozzles - No. 6+6 horizonal inseritng nozzles (Glue injectors and dowel drivers) - High-pressure Glue-feeding system - Total installed power KW 5 ca.

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head. Horizontal position of the panel (workpiece) Numerical Control Xilog Plus 2 (Software Xilog Plus 2) Safety cabin (enclosure) of the working head. Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) With pushing system to automatically infeed the workpiece In-feeding table (with motorized belts) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 250 x 70 x 10 (2 x 5 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1300 x 80 (2 x 40 mm) Two (2) panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle HSK63F (power Kw 7,5) No. 1 Circular Grooving Saw - dia. mm 125 No. 48 Vertical drilling spindles No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle HSK63F (power Kw 7,5) No. 1 Circular Grooving Saw - dia. mm 125 No. 48 Vertical drilling spindles Kdodpfx Aofz I Ufsg Usg No. 10 Horizontal drilling spindles (8 in X + 2 in Y) Inserting nozzle and glue injectors. Storage tanks for automatic feeding of the dowels

Condition: excellent (used), AUTOMATIC Drilling and Dowels inserting LINE (2 machines): W12054A) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 5 bottom vertical units (each with 2 swivelling drilling heads at various spindles, HP 2.3 ea) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 5 top pressing devices - No. 2 endless screws to evacuate the wastes. With NC (software Modul Tooling System) to control, manage and run the 2 machines of this line W12054B) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT Kdjdpfx Aovnq Txeg Ujg - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 8 inserting nozzles, such as Glue injectors and dowel drivers) - No. 3 bottom units (each with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 3 Top pressing devices - No. 2 endless screws to evacuate the wastes.

Condition: like new (used), Vacuum pouch filling and sealing machine Pouch size: width 90 mm - 180 mm, max. length: 260 mm Sealing method: impulse heat sealing. Pouch type: flat pouch Packaging material: laminated pouch. Ksdpfjx S If Esx Ag Usdg Specific applications: solid products, solids + liquids, and liquids (seafood, nuts, pickles, etc.). Incorporates: - 12 vacuum chambers 330mm x 300mm. - 2 Busch vacuum pumps - Product feeder: the product is dispensed into a cylindrical polypropylene container, which then supplies the vacuum pouch filler. - Model: CF-90 - Weight: 350 kg - Output: 35 containers/min - Outer container diameter: 88 mm - Inner container diameter: 80 mm - Max. filling capacity: 0.56 liters - Dimensions: 1.85 m x 1.20 m x 2 m * Production may vary depending on the format and product to be filled.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 02116016, For sale: Nowicki MM200 injector, year of manufacture 2016. Kdedpoxyxh Rsfx Ag Uog

Condition: new, Year of construction: 2024, ### 🔫 ProfiGun PM-1 powder gun Lightweight, ergonomic, perfectly balanced with a contoured grip. ✋⚖️ Adjust powder output and switch programs directly on the gun. 🎛️ Ceramic cascade up to 100,000 V for efficient charging of all powder types. ⚡ New-generation nozzles improve penetration on complex parts. 🎯🧩 Profiled nut for a secure grip + conductive handle for excellent operator grounding. 🔩🧤 Impact-resistant materials, fully demountable design, replaceable powder path tube. 🛡️🛠️ Patented in the EU and US. Polarity: negative. 🇪🇺🇺🇸➖ One-piece powder path + quick-release hose coupling reduce leaks and speed up hose changes. 🔌✅ ### 💨 ProfiJector powder pump Efficient injector with an optimized feed angle validated by research. 📐🔬 Lower powder and air consumption vs. right-angle injectors, with low running costs. ♻️📉 European patent protected. 🏅 ### 🖥️ PSS controller - 7" touchscreen 7-inch glove-friendly touch panel. 🧤📲 3 auto programs: overcoating, hard-to-reach areas, flat surfaces. 🔁 Fine tuning: 0.1 kV and 0.1 uA resolution. 🎚️ Advanced pneumatic valves for precise air dosing (patent pending) + real airflow measurement to detect drops or blockages. 💨📈⚠️ Diagnostics, program naming, external control via Modbus. 🧠🔧🔌 ### ⚡ ProfiCharge ceramic cascade (made in Poland) Ksdpfx Asflpi Nog Uedg High-precision ceramic cascade up to 100,000 V, manufactured in Poland. 🇵🇱⚡ High-frequency ion emission (up to 17,000/sec) improves charging - less powder to the collector, more on the part. 🎯📉 Ultra-precise current control: 0-100 uA, stable even below 10 uA (0-10 uA focus with 0.1 uA steps). 🎛️ ### 💨 Air and application quality features Electronically controlled needle valves + integrated flowmeters for real-time, precise air delivery. 💨✅ Adjustable electrification curve for different powders and demanding parts. ⚙️🧩 Non-stick, puncture-resistant nozzles resist electrical breakdown, reduce clogging, and simplify color changes. 🧼✨ Automatic gun purge (from handle or screen) for faster, cleaner color changes. 🔁💨 ### 🛡️ Safety and compliance Discharge energy below 2 mJ + antistatic hose with double grounding strap. ⚠️🔒 ATEX and EN 50050-2 compliant for potentially explosive areas. ✅ ### 🧠 Productivity and support Quick Program: fast switching via rapid trigger presses. ⚡🎛️ Visual wear counters + fault history, suggestions, and self-monitoring diagnostics. 👀🔧 Up to 8 languages: PL, EN, DE, FR, RU, ES, IT, SV. 🌍 Animated troubleshooter for guided diagnostics. 🧭 Professional mode (hints on/off) + daily and job statistics for order management. 📊⏱️✅

Condition: ready for operation (used), functionality: fully functional, mileage: 892,193 km, first registration: 01/2005, fuel type: diesel, empty load weight: 6,500 kg, maximum load weight: 5,490 kg, overall weight: 11,990 kg, tire size: 235/60R19,5, tire condition: 75 %, axle configuration: 2 axles, next inspection (TÜV): 01/2027, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: steel-air, number of seats: 2, total length: 10,500 mm, total width: 2,600 mm, total height: 3,000 mm, loading space length: 8,200 mm, loading space width: 2,600 mm, Year of construction: 2005, Equipment: ABS, EBS, cable winch, car registration, central locking, compressor, crane, differential lock, electric window regulation, electronic stability program (ESP), fog lights, full service history, non-smoking vehicle, onboard computer, parking heater, power assisted steering, power mirror, seat heater, tachograph, traction control, trailer coupling, truck registration, For sale: Mercedes-Benz Atego 1223 L 4x2 with crane, remote-controlled hydraulic winch, officially registered recovery truck. This vehicle has had single ownership from new, custom-ordered by the current owner. The owner has exclusively operated and maintained it since. At 400,000 km, new Steck pumps and injectors were installed; at 800,000 km, the fuel injection system was comprehensively overhauled. Recently passed technical inspection, valid Hungarian documents, winch, crane, and amber beacon are listed in the registration papers. Kdodsybb Ikjpfx Ag Ujg

Condition: used, Year of construction: 2015, functionality: fully functional, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness 10-60 mm Workpiece thickness with MFU aggregate (depending on profile) 10-35/60 mm Edge height 14-64 mm Edge thickness – roll material 0.4-3 mm Edge thickness – strip material (*) 0.4-10 (12) mm Workpiece overhang 25 mm Minimum panel length 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Feed speed 12 m/min Kedpfsxzb Iiex Ag Ujdg Dust extraction* 8x connection Ø100 mm Compressed air connection 7 bar Glue pot capacity 2 (approx.) kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge to the workpiece, automatically cuts it from the roll, and presses it onto the workpiece, guaranteeing perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs with 0° to 15° angle. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a thickness of max. 3 mm. JOINTING CUTTER UNIT RT02 Joins the workpiece before glue application. Equipped with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing thick PVC/ABS edges. FLAT SCRAPER RC02 Aggregate for removing excess glue in the edge-to-panel area. Equipped with tracing rollers and a flat knife with engagement control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using fabric polishing discs. The unit automatically adapts to the workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of anti-adhesive using injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing through: - controlled pressure of the glue roller - automatic disengagement in case of feed stop - automatic ON/OFF of the glue unit • REVERSE system to switch the glue roller for co- or counter-rotation Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue with machines equipped for EVA gluing. NC Axis for Fine Trimming Unit Kit for the automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system. Pair of multiprofile cutters for the fine trimming unit: 25-degree bevel, radius 2 mm + radius 1 mm plus straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the tracer to match the edge thickness. Adjustment takes place via the control system. Function for processing only on the corners. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system.

Condition: used, functionality: fully functional, Technical specifications (typical for the SK 500s model): Working area: approx. 500 × 500 × 500 mm Design: Tabletop or freestanding, compact Abrasive: Glass beads, corundum, ceramic beads, etc. Kdodpsv Syvqofx Ag Usg Blasting principle: Injector principle (suction blasting) Compressed air consumption: approx. 200–400 l/min at 4–7 bar Lighting: Integrated LED or fluorescent lamp Viewing window: Safety glass with replaceable protective film Filtration: Integrated cartridge filter or external dust collector Abrasive return: Automatic, via cyclone separator Special features: Ergonomic glove ports Footswitch operation for safe working Compact design – ideal for workshops and laboratories Quiet operation thanks to sound insulation Easy to maintain and durable

Condition: refurbished (used), Major Overhaul Gas Engine The following work is carried out during the major overhaul: Replacement of all wear parts, bearings, filters, and seals. Renewal or reconditioning of: - Reconditioning of crankshaft and crankcase - Cylinder liners, piston rings (pistons as required), - Sensors - Water pump - Starter motor - Cylinder heads - Spark plugs - Injectors and injection lines Kdjdpfox Huxuox Ag Ueg - Thermostat housing - Connecting rod and cylinder head bolts - Oil modules - Viscous damper The following components are also inspected and replaced if necessary: - Rocker arms - Connecting rods - Lubricating oil pump - Gears The scope of delivery is defined as follows: -with starter motor -with cylinder heads -without exhaust manifolds or elbows -without turbocharger -without charge air cooler -without gas mixer -without throttle valve -without engine management and ignition system -without charge air piping The engine is equipped with the following sensors: -Engine oil temperature sensor -Engine oil pressure sensor -Speed sensors (2 units) -Ignition pulse generator This is a factory-refurbished product. Note: Refurbished parts are those that, in addition to a functional test, have been inspected for visible defects; any defective parts have been repaired or replaced. All replacement engines supplied by or through agriKomp GmbH require the return of an identical old engine. In the event that the exchange unit is not returned within 8 weeks from the exchange date, a surcharge of €10,000 will be invoiced.

Year of construction: 1999, condition: good (used), The machine has been produced in the late 1990's. Very little usage (it has been stored in a warehouse). Located in Tata, Hungary. No warranty. 1800 bar Cr pump with injector Test bench with 15 kW power, 12 measuring points, flow-through water cooling KMA flow meter system with 2 flow meters. The bench has a separate lubricating oil pump with lubricating oil supply Speed range from 0 to 4000 f/min. Equipment: - Bosch Cr pump control test in safety, protective cage - Bosch magnet coil injector testing, coding - optional testing of piezo injectors - option to repair and test CP2 pumps Testing and coding is performed using Bosch factory software and database. Bosch Esi subscription required Ksdpfx Astw S Awjg Ujdg The test bench is in good condition and has been operated with regular calibration. For sale due to site closure.

Condition: used, Year of construction: 1992, The CO2 target value is entered on the digital controller, causing the CO2 metering valve to open accordingly. The CO2 is introduced into the product stream via an injector and then dissolved and bound in the saturation section. The amount of CO2 in the beverage is monitored by a CO2 analyser and computer. The actual value is automatically compared with the target value and corrected via the CO2 valve if necessary. A CO2 recorder records the actual value. Kdsdpfxsxzqufe Ag Usg Additional title: impregnation plant Capacity: 20000 l/h Final CO2 content value (operating value) up to: 7 g/l Material: stainless steel Features: CO2 injection; settling section; control cabinet with user interface for CO2 control and CO2 recorder; various pipes, valves, measurement technology

Condition: used, Year of construction: 1994, Three-stage water degassing system for water degassing and CO2 impregnation. The raw water enters the first degassing tank through an injector nozzle. The high flow velocity causes oxygen and nitrogen to be torn out of the water jet and escape from the top of the tank. This process is repeated in the second degassing tank. In the third tank (impregnation tank), after entering through the injector nozzle, the water is mixed with the CO2 pressure in the upper part of the tank, which is under impregnation pressure. Additional title: multi-stage cold deaeration with impregnation Base construction: mounted on stainless steel frame Features: 3 containers (each with pressure gauge); 3 centrifugal pumps; control cabinet with control panel; pipes with various fittings Kjdpjxzqt Iefx Ag Usdg

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! Important note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ► Optimal adhesion begins with perfect preparation – Chemical pretreatment systems from PROTON◄ Before the paint can develop its full potential, the surface must be flawless. PROTON surface pretreatment systems ensure that every contaminant – be it oil, dirt, or oxide – is reliably removed. This is the only way to achieve lasting corrosion resistance and excellent paint adhesion. Each product requires a customized process. Whether alkaline or acid degreasing, iron or zinc phosphating, nanotechnology, or chrome-free processes – we develop customized solutions for your requirements. Ksdpskwct Uefx Ag Usdg Our pretreatment systems – whether spray or immersion systems – offer you: ✳️ Maximum energy efficiency ✳️ Minimized chemical and water consumption ✳️ Precise process control with automatic dosing and pH monitoring ✳️ Durable construction made of chemical-resistant stainless steel or plastic Our promise: Customized technology for the highest demands Our experienced project team analyzes your production conditions in detail and recommends the optimally matched pretreatment system. We consider all crucial parameters – from heating power and water circulation to vapor deposition and chemical separation. The spray wash lines are seamlessly integrated into your conveyor system. All cleaning, rinsing, and drying processes are fully automated and efficient – ready for a perfect coating. Available systems: ✳️ Spray and dip pretreatment lines ✳️ Nanotechnology systems (e.g., Bonderite, Oxsilan) ✳️ Degreasing and pickling systems ✳️ Iron and zinc phosphating lines ✳️ Chromating and chrome-free systems PROTON – Technology that convinces. Experience that works. ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: ready for operation (used), functionality: fully functional, GEA CFS Yieldjector 650 The GEA CFS Yieldjector 650 injector is designed for industrial processing facilities seeking precise, consistent, and controlled brine injection. It is suitable for both bone-in and boneless products, enabling efficient processing of poultry, pork, beef, and fish. Its homogeneous distribution system ensures that the brine penetrates the muscle uniformly, stabilizing product texture and improving cooking yield. The high-density needle pattern guarantees complete coverage of the product, even on flat or delicate cuts. The machine operates using an incremental step-by-step process: the product advances on a conveyor, stops under the injection head, and then the injection takes place with high precision. Each needle is equipped with an independent retraction mechanism. This means if a needle encounters a bone, it retracts instantly and stops the injection, preventing brine pockets and preserving muscle integrity. This technology minimizes product losses and delivers consistent results, cycle after cycle. Additionally, automated control via a touchscreen interface simplifies adjustments, making recipe reproducibility straightforward. The GEA CFS Yieldjector directly increases line profitability. Precise injection reduces weight variations, narrows batch-to-batch differences, and achieves injection rates up to 80%, depending on product type. Integrated cleaning systems simplify maintenance, reduce downtime, and help maintain high throughput. As a result, this machine is an ideal solution for production sites where precision, hygiene, and consistent performance are daily priorities. Technical specifications: Dimensions: 2110 x 1790 x 2511 mm Belt width: 450 / 650 mm Capacity: 1,000 to 12,000 kg/h Power: 12.5 kW Number of needles: 504 / 728 Kdjdpfoxry Txjx Ag Uog Max product height: 100 mm

Year of construction: 1995, condition: good (used), The model VSC will make segents, slabs and square or rectangular strips from a variety of food products including Carrots/pickles/zucchini , potatoes/and many other food products machine can optional be delivered with Infeed V-belt Kdjdpfx Agjfxxlye Usg as-is or tested and set to customer needs.

Condition: used, Year of construction: 2007, operating hours: 11,800 h, Serial number: L70FV2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22029 Specifications: Kdsdpfjx Hdldsx Ag Ujg 2007 model Hours: approximately 11,800 125 kW Weight: 15,000 Tires (see pictures) Summer tires Volvo grader bucket Rotor lamp Dashboard replaced Turn signal lever has been replaced Emergency stop switch is new Injectors changed two years ago (not much has happened since then) One owner AC/climate The pallet fork is not included. Radio Ready for delivery   Description: 2007 Volvo L70F wheel loader w/ winter and summer tires and grading bucket. The machine has only had one owner throughout. The instrument panel on the machine has been replaced. The owner says an error code is coming up, but he says this is wrong since everything needs to be replaced. Watch video. Ready for delivery. Hours: 11800 Own weight: 15000 Kw: 125 Model: L70F hjullaster m/ vinter- og sommerdekk og planeringskuffe. En eier! Se video

Condition: good (used), mileage: 999,500 km, power: 265 kW (360.30 HP), first registration: 09/1997, fuel type: diesel, tire size: 295/80R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 600 l, color: red, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, Year of construction: 1997, Equipment: ABS, cruise control, differential lock, = More options and accessories = - 600 liter diesel tank - Heated exterior mirrors - Driver’s comfort seat - Differential lock - Speed limiter - Radio/CD player - Rotating beacons - Sleeper cab - Sun visor - ZF16 manual gearbox = Notes = GOOD CONDITION DAF FT95-360 ATI SPACECAB 4x2 TRACTOR UNIT (EURO 2) WITH ZF16 MANUAL GEARBOX (FORMER DUTCH REGISTRATION (BF-JT-56)!! 360HP, EURO 2 (MECHANICAL PUMP AND INJECTORS)!! ZF16 MANUAL GEARBOX!! 600 LITER DIESEL TANK!! ETC!! PERFECT FOR COLLECTORS, TRUCK IS IN GOOD RUNNING CONDITION, READY FOR WORK!! MORE DAF CF/XF 4x2 / 6x2 / 6x4 / 8x4 (EURO 2/3/4/5/6) IN STOCK FOR SALE!! (>85 TRUCKS/TRAILERS AVAILABLE)!! SHIPMENT, STACKING, LOADING, TRANSIT REGISTRATION OR TRANSPORT? NO PROBLEM FOR US; WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR YOUR FIRST IMPRESSION!! () YOU CAN ALSO VISIT OUR WEBSITE; ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further information = Technical Information Number of cylinders: 6 Engine displacement: 11,600 cc Transmission Gearbox: ZF16 manual gearbox, 16 gears, manual transmission Axle configuration Tyre size: 295/80R22.5 Brakes: Drum brakes Front axle: Max. axle load: 7,500 kg; Steering; Tyre tread left: 20%; Tyre tread right: 20%; Suspension: leaf suspension Rear axle: Dual wheels; Differential lock; Max axle load: 11,500 kg; Inner left tyre tread: 10%; Outer left tyre tread: 10%; Inner right tyre tread: 10%; Outer right tyre tread: 10%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 6,960 kg Payload: 12,040 kg Gross vehicle weight: 19,000 kg Functional Superstructure brand: ZF Condition Technical condition: very good Visual condition: average Identification Registration: BF-JT-56 Further information Kdodpouy I Iuofx Ag Usg Please contact the Sales Department or Erik Engel for more information.

Condition: good (used), mileage: 1,170,000 km, first registration: 05/1999, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 870 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, Year of construction: 1999, Equipment: ABS, air conditioning, differential lock, electric window regulation, spoiler, = Additional options and equipment = - 2 bunks (sleeping berths) - 870 liter fuel tank - Aluminum fuel tank - Heated exterior mirrors - Power brake booster - Comfort driver's seat - Roof spoiler - Differential lock - High beam headlights - Speed limiter - Sleeper cab - Sun visor - ZF16 manual gearbox = Remarks = GOOD CONDITION DAF FT95-380XF SPACECAB 4x2 TRACTOR UNIT (EURO 2) WITH ZF16 MANUAL GEARBOX, ROOF SPOILER & AIR CONDITIONING!! 380HP, EURO 2 (MECHANICAL PUMP AND INJECTORS)!! ZF16 MANUAL GEARBOX!! D.E.B ENGINE BRAKE!! 870 LITER DIESEL TANK!! AIR CONDITIONING!! SPOILER ON CAB!! ETC!! TRUCK IS IN GOOD RUNNING CONDITION, READY FOR HEAVY-DUTY JOBS!! MORE DAF CF/XF 4x2 / 6x2 / 6x4 / 8x4 (EURO 2/3/4/5/6) IN STOCK FOR SALE!! (>85 TRUCKS/TRAILERS IN STOCK)!! SHIPPING, STACKING, LOADING, TRANSIT REGISTRATION OR TRANSPORT? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! YOU CAN ALSO CHECK OUR WEBSITE; ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,580 cc Transmission Transmission: ZF16 manual gearbox, 16 speeds, manual transmission Kdjdpeuy Ixtjfx Ag Ujg Axle configuration Tyre size: 315/80R22.5 Brakes: Drum brakes Front axle: Max. axle load: 7,500 kg; Steering; Tyre tread left: 30%; Tyre tread right: 30%; Suspension: leaf springs Rear axle: Twin tyres; Differential lock; Max. axle load: 13,000 kg; Inner left tyre tread: 20%; Outer left tyre tread: 20%; Inner right tyre tread: 20%; Outer right tyre tread: 20%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,620 kg Payload: 11,380 kg Gross vehicle weight: 19,000 kg Functional Cargo compartment capacity: 870 l Brand of superstructure: ZF Condition Technical condition: good Visual condition: good Identification Registration number: BH-SN-04 Further information Please contact Sales Department or Erik Engel for more information.

Condition: used, mileage: 550,000 km, power: 132 kW (179.47 HP), first registration: 02/2014, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 07/2025, color: blue, gearing type: automatic, emission class: euro5, number of seats: 2, Equipment: central locking, MAN TGL 8.180 ENGINE BRAKE, CAMERA, TAIL LIFT ----VEHICLE HISTORY * 2ND OWNER * GERMAN VEHICLE * VIDEO AVAILABLE ON REQUEST VEHICLE EQUIPMENT * VEHICLE IS FULLY ROADWORTHY * ONE INJECTOR DEFECTIVE * AUTOMATIC TRANSMISSION * CRUISE CONTROL * ENGINE BRAKE * HILL START ASSIST * COMFORT SEATS * SEAT HEATING * SEAT VENTILATION * LOCAL DISTRIBUTION SPECIFICATION * REVERSING CAMERA * ROOF SPOILER * ROOF HATCH * BOX BODY * PALFINGER TAIL LIFT * JUNGEFAHRZEUGBAU BODY * FRONT LEAF SPRINGS * REAR AIR SUSPENSION * 2 AXLES * ELECTRIC WINDOWS * TIRE SIZE: * FRONT: 235 / 75 R 17.5 * REAR: 235 / 75 R 17.5 ---- * EXPORT SALES ONLY WITH DEPOSIT (MINIMUM 500 - 2,000 EUR) ----EXPORT EXPORT DECLARATION (CUSTOMS EXW) IN 10 MINUTES (APPROVED EXPORTER), 5 DAY, 30 DAY PLATES AND 17-21 DAY AUSTRIAN PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! Kdjdpfsw Anqpsx Ag Ujg For sales to EU and third countries, a deposit/guarantee of at least 500.00 / 1,000.00 EUR is required. Subject to change, error, and prior sale! More vehicles can be found on our website. Sale exclusively according to our General Terms and Conditions; see website. Important Note – Important Information: Despite careful review of all details in our offer, errors may occur. Some may be due to transmission errors of different platform providers. Therefore, all information is supplied without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB (German Civil Code). Rather, it serves as information for contract negotiation. All information provided is without guarantee and does not represent warranted characteristics.

Condition: excellent (used), mileage: 165,000 km, first registration: 06/2017, fuel type: diesel, maximum load weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, airbag, central locking, onboard computer, CERTIFIED USED VEHICLE!!! Contact: For more information call: 3441197960 – 030933077 Franco / Nicola Follow us on Facebook and Instagram. Specifications: MERCEDES BENZ SPRINTER 514 CDI 3T5 curtain-sided truck with sliding tarpaulin, serviced, with new clutch, injectors, and brakes Ksdpfxox Ihyuj Ag Ujdg Standard equipment: ABS, Airbag, Electric windows, Radio, On-board computer, Central locking, Traction control, Air conditioning, ESP, CD player, MP3, Air-suspended seat, Power steering, Steering wheel controls. Rossini Service: Founded in 1960 as a FIAT / OM workshop, since 1992 Rossini Service has been an ISO-certified authorized IVECO workshop. Our qualified and specialized staff has decades of experience in repairing and tuning passenger and commercial vehicles of all manufacturers. Every vehicle from Rossini Service is thoroughly inspected and prepared before delivery.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, rotational speed (max.): 2,800 rpm, TECHNICAL DETAILS Minimum panel length: 170 mm Maximum panel length: 2,500 mm Minimum panel width: 50 mm Maximum panel width: 700 mm Drilling head positioning: NC Spindles for vertical drilling: 40 Spindles for horizontal drilling in "Y" direction: 6 Motor power: 3 kW Max. speed: 2,800 rpm Spindles for vertical drilling: 4+4 Motor power: 2.2 kW Max. speed: 2,780 rpm Kdedpfjxw U Arex Ag Ujg MACHINE DETAILS Number of injectors: 2 Number of storage tanks: 2 EQUIPMENT Control system: WINDOWS Wooden dowels Ø8 Note: Tools are not included in the offer.