Used Pickle Injectors for sale (178)

Year of construction: 1995, condition: good (used), The model VSC will make segents, slabs and square or rectangular strips from a variety of food products including Carrots/pickles/zucchini , potatoes/and many other food products Bljdpfefxxlyox Abber machine can optional be delivered with Infeed V-belt as-is or tested and set to customer needs.

Condition: used, mileage: 239,000 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 05/2011, next inspection (TÜV): 06/2027, emission class: euro5, color: black, number of seats: 3, Year of construction: 2011, total length: 5,910 mm, total width: 1,993 mm, total height: 2,435 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), * VW Crafter 35 panel van L2 H1 with 3 seats - tow bar - 3 seats - immediately available - * Diesel - Engine capacity: 2,461 cc - 120 kW / 163 hp - Euro 5 - Green emissions sticker * 6-speed manual transmission - Wheelbase: 3,665 mm - Load compartment with wooden lining & carpet * All 5 injectors replaced NEW at 223,000 km, turbocharger NEW at 220,000 km, rear brake pads NEW at 236,000 km, front axle brakes completely NEW at 230,000 km * German vehicle - German registration documents - * Vehicle immediately available and ready for pick-up - * Please arrange an appointment for viewing - * Contact person: Mr. Andreas Vogel Bljdpfx Aboxpb Dajbor * The information provided online is a non-binding description. * They do not constitute guaranteed features. * The seller is not liable for typographical or data transmission errors. * Subject to change, errors, and prior sale. Special equipment: Audio system RCD 2001, outside temperature display, wooden flooring in the cargo area, spare wheel in operational condition, double passenger seat in driver's cab, high-grade wooden trim in cargo/body area Further features: Storage trays/compartments above windscreen, driver's airbag, traction control (ASR), rear right entry handle on rear pillar, driver assistance system: brake assist (HBA), rear wing doors without glazing, body/chassis: standard panel van, body variant: standard roof, fuel tank: 75 liters, high cargo partition wall without window, engine 2.5 L - 120 kW TDI DPF, parking light switch, wheelbase 3,665 mm, low emissions according to Euro 5, right sliding door in cargo/passenger area, seat cover/upholstery: fabric, driver's seat height-adjustable, front stabilizer, permissible total weight 3.5 t, additional brake light

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, rotational speed (max.): 2,800 rpm, TECHNICAL DETAILS Minimum panel length: 170 mm Bjdsxw U Arjpfx Abbslr Maximum panel length: 2,500 mm Minimum panel width: 50 mm Maximum panel width: 700 mm Drilling head positioning: NC Spindles for vertical drilling: 40 Spindles for horizontal drilling in "Y" direction: 6 Motor power: 3 kW Max. speed: 2,800 rpm Spindles for vertical drilling: 4+4 Motor power: 2.2 kW Max. speed: 2,780 rpm MACHINE DETAILS Number of injectors: 2 Number of storage tanks: 2 EQUIPMENT Control system: WINDOWS Wooden dowels Ø8 Note: Tools are not included in the offer.

Condition: ready for operation (used), functionality: fully functional, GEA CFS Yieldjector 650 The GEA CFS Yieldjector 650 injector is designed for industrial processing facilities seeking precise, consistent, and controlled brine injection. It is suitable for both bone-in and boneless products, enabling efficient processing of poultry, pork, beef, and fish. Its homogeneous distribution system ensures that the brine penetrates the muscle uniformly, stabilizing product texture and improving cooking yield. The high-density needle pattern guarantees complete coverage of the product, even on flat or delicate cuts. The machine operates using an incremental step-by-step process: the product advances on a conveyor, stops under the injection head, and then the injection takes place with high precision. Each needle is equipped with an independent retraction mechanism. This means if a needle encounters a bone, it retracts instantly and stops the injection, preventing brine pockets and preserving muscle integrity. This technology minimizes product losses and delivers consistent results, cycle after cycle. Additionally, automated control via a touchscreen interface simplifies adjustments, making recipe reproducibility straightforward. The GEA CFS Yieldjector directly increases line profitability. Precise injection reduces weight variations, narrows batch-to-batch differences, and achieves injection rates up to 80%, depending on product type. Integrated cleaning systems simplify maintenance, reduce downtime, and help maintain high throughput. As a result, this machine is an ideal solution for production sites where precision, hygiene, and consistent performance are daily priorities. Technical specifications: Dimensions: 2110 x 1790 x 2511 mm Belt width: 450 / 650 mm Capacity: 1,000 to 12,000 kg/h Power: 12.5 kW Number of needles: 504 / 728 Max product height: 100 mm Bsdoxry Txopfx Abbelr

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 700 kg, workpiece height (max.): 2,300 mm, workpiece length (max.): 6,000 mm, insulation material: Mineralwolle, insulation thickness: 150 mm, workpiece width (max.): 2,000 mm, Complete Plant with Chemical Pretreatment (7 Stages) for GSB Certification (QUALICOAT) (Suitable for Multimetal) All dimensions and further modifications can be taken into account during design and planning. The offer includes the following components: - Pretreatment cabin incl. reverse osmosis unit - Walk-in coating booth - Powder spray gun - Powder curing oven - Dryer - Manual conveyor system - Lifting-lowering station - Electrical control system Details: 1. Walk-in cleaning cabin, pretreatment for steel and aluminum The cleaning cabin is designed for automatic cleaning. Medium pressure spraying can be applied. The cabin contains 7 different spray tanks. Maximum part size: L = 6000 mm, W = 2000 mm, H = 2300 mm. 1. Cabin dimensions - Length: 6,500 mm - Width: 3,000 mm - Height: 3,600 mm 2. Total pretreatment dimensions - Length: 6,600 mm - Width: 4,640 mm - Height: 4,300 mm Process Stages: 1st Stage: Degreasing/Neutral Pickle - Heated tank, 50-55°C, time = 3-6 minutes, drip-off time = 80 seconds 2nd Stage: Acidic Mineral Pickle - Heated tank, 50-55°C, time = 3-6 minutes, drip-off time = 80 seconds 3rd Stage: Rinse 1 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 1 minute 4th Stage: Rinse 2 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 45 seconds 5th Stage: Rinse 3 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 45 seconds 6th Stage: Nano-Ceramic - Processed at ambient temperature, time = 0.75-1.5 minutes, drip-off time = 60 seconds 7th Stage: Overhead spray ring for post-rinsing after Stage 6 - Rinsing with ambient temperature, time = 1 minute, drip-off time = 60 seconds 8th Stage: Passivation, no-rinse for aluminum - Rinsing with ambient temperature, time = 2-3 minutes, drip-off time = 1-2 minutes 1.1. Reverse Osmosis Unit - Reverse osmosis system, 250 liters/hour 1.2. Oil Skimmer - Tank no. 1 is equipped with an oil skimmer "UniSkim-21-100". Construction: The spraying system is two-part and movable, and can be shifted up to 500 mm via a pneumatic sliding system. Return to the tanks is also mobile via a pneumatic sliding system with 7 positions in order to serve the 7 tanks. 2. Walk-in coating booth 1. Booth dimensions - Length: 7,400 mm - Width: 4,000 mm - Height: 3,236 mm 2. Booth dimensions incl. extraction system - Length: 8,552 mm - Width: 6,232 mm - Height: 4,393 mm The booth features 2 single-side pneumatic doors for entry/exit of workpieces, and an additional side door for the coater. 3. Powder Coating Equipment Wagner, Manual System "Sprint 2 B" 4. Powder Curing Oven - Internal dimensions: - Length: 6,500 mm - Width: 2,200 mm - Height: 3,416 mm 5. Dryer - Internal dimensions: - Length: 6,500 mm - Width: 1,200 mm Bjdsffv Tpjpfx Abbslr - Height: 3,416 mm 6. Manual Conveyor System The conveyor system consists of: The conveyor system is designed for a crossbar weight of 700 kg. The carriage can carry a maximum of 2,000 kg on 3 rails.

Condition: like new (used), Pokomat P16/320 Injector Bledpslt T Udsfx Abber Stainless, 16 needle injector, capacity 800Kgs/h, with two sets of needles, belt dimensions 1300mm x 300mm, 3Ph

Condition: used, Year of construction: 2002, Overview Aseptic PET filling line for fruit juices, juice-based beverages, and spritzers, built 2002–2007 by KRONES. Suitable for still and carbonated products (carbonation currently disconnected). Covers blowing, filling, labeling, packaging, palletizing. Bottle sizes 0.5–1.5 L, 28 mm closures. Nominal output: 20,000 b/h (1.0 L still). Fully assembled, out of operation, viewing by appointment. Technical details Capacity: up to 24,000 b/h (0.5 L still) Bottle sizes: 0.5–1.5 L PET Products: still/carbonated, with/without pulp Closures: 28 mm flat cap Years of manufacture: 2002–2007 Scope of delivery Pos. 1 Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP Pos. 2 Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h Pos. 3 Sterile tank: Roth 2002, 11,000 L Pos. 4 Carbonization: Roth/Ruland 2002, 2575 L, disconnected Pos. 5 Nitrogen system: Terboven/ISTE 2002 Pos. 6 Hygienic center: Ecolab/Lang 2002, CAF, no PLC Pos. 7/8 Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L Pos. 9 CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank Pos. 10 Cleanroom: Weiss 2002, ventilation/overpressure Pos. 11 Preform hopper: Dieterle 2002, MD3 Pos. 12 Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 Pos. 13 Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h Pos. 14 Air conveyor: Krones 2002, automatic rail adjustment Pos. 15 Cap conveyor: Gassner 2002, 2 container positions, cap elevator Pos. 16–18 Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated Pos. 19 Label check: Krones 2002, incl. in Prontomodul Pos. 20 Bottle check: Krones 2002 Pos. 21 Conveyor: Krones 2002, air blower before labeling Pos. 22 Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h Pos. 23 Canmatic module: Krones 2007, paper labels Pos. 24 Contriroll module: Krones 2007, film roll Pos. 25 MHD coding: Videojet Excel/170i Pos. 26 Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport Pos. 27 Packaging conveyor: Krones 2002 Pos. 28 Handle applicator: Twinpack MHTE 2002 Pos. 29 Empty pallet magazine: Krones LPM 2002 Pos. 30 Palletizing: Krones robot 3A loader 2002, 4,000 packages/h Pos. 31 Pallet conveyor: Krones 2002, transfer cart & turner Pos. 32 Empty pallet magazine: Krones LPM 2002 Pos. 33/34 Pallet stretch wrappers: Franpak 2002, top sheet applicator Pos. 35 Tying machine: Bornbinder HB 2002 Pos. 36 Pallet coding: Logopak EAN 128 2003 Bsdpfexqqpujx Abbolr

Condition: good (used), mileage: 999,500 km, power: 265 kW (360.30 HP), first registration: 09/1997, fuel type: diesel, tire size: 295/80R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 600 l, color: red, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, Year of construction: 1997, Equipment: ABS, cruise control, differential lock, = More options and accessories = - 600 liter diesel tank - Heated exterior mirrors - Driver’s comfort seat - Differential lock - Speed limiter - Radio/CD player - Rotating beacons - Sleeper cab - Sun visor - ZF16 manual gearbox = Notes = GOOD CONDITION DAF FT95-360 ATI SPACECAB 4x2 TRACTOR UNIT (EURO 2) WITH ZF16 MANUAL GEARBOX (FORMER DUTCH REGISTRATION (BF-JT-56)!! 360HP, EURO 2 (MECHANICAL PUMP AND INJECTORS)!! ZF16 MANUAL GEARBOX!! 600 LITER DIESEL TANK!! ETC!! PERFECT FOR COLLECTORS, TRUCK IS IN GOOD RUNNING CONDITION, READY FOR WORK!! MORE DAF CF/XF 4x2 / 6x2 / 6x4 / 8x4 (EURO 2/3/4/5/6) IN STOCK FOR SALE!! (>85 TRUCKS/TRAILERS AVAILABLE)!! SHIPMENT, STACKING, LOADING, TRANSIT REGISTRATION OR TRANSPORT? NO PROBLEM FOR US; WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR YOUR FIRST IMPRESSION!! () YOU CAN ALSO VISIT OUR WEBSITE; Bljdpeuy I Iuefx Abber ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further information = Technical Information Number of cylinders: 6 Engine displacement: 11,600 cc Transmission Gearbox: ZF16 manual gearbox, 16 gears, manual transmission Axle configuration Tyre size: 295/80R22.5 Brakes: Drum brakes Front axle: Max. axle load: 7,500 kg; Steering; Tyre tread left: 20%; Tyre tread right: 20%; Suspension: leaf suspension Rear axle: Dual wheels; Differential lock; Max axle load: 11,500 kg; Inner left tyre tread: 10%; Outer left tyre tread: 10%; Inner right tyre tread: 10%; Outer right tyre tread: 10%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 6,960 kg Payload: 12,040 kg Gross vehicle weight: 19,000 kg Functional Superstructure brand: ZF Condition Technical condition: very good Visual condition: average Identification Registration: BF-JT-56 Further information Please contact the Sales Department or Erik Engel for more information.

Condition: used, mileage: 265,000 km, Year of construction: 2011, Serial number: WDB9066331S52xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21696 Specifications: Km: approx. 265,000 Gearbox: Manual Worn summer tires Bsdpfx Aext Ddkobbslr Good winter tires Zepro tail lift, 500 kg Side door Wired remote control 3 seats Euro 5, 163 hp Brake discs front and rear replaced (according to owner) Radio/CD Climate control / AC Service and maintenance done by owner Video Ready for delivery Description:Mercedes Sprinter 316CDI from 2011.Equipped with a Zepro tail lift.Comes with 2 sets of tires.Owner reports that 2 injectors deliver too much and 2 deliver too little.Ready for delivery. Km: 265000 HK: 163 Technical approved: Yes EU-approved until: 31.03.2027 Own weight: 2041 Total Weight: 3500 Payload: 1384 Width: 199 Length: 591 Euro: 5 Model: SPRINTER Gearbox: Manual Number of seats: 3

Condition: used, Diesel generator set, power generator, emergency generator EUROPOWER type EPUS 150 TDE-3A Fuel injectors on the diesel engine are missing Serial No. 3722 Year of manufacture: 2017 Rated power (Cont): 150 kVA Rated current (BR): 217 Amps Voltage: 400/230 Volt, 50 Hz Drive engine: 6-cylinder in-line diesel engine VOLVO Penta, type TAD 752 GE Engine output at 1500 rpm: 183 kW Displacement: 7150 cc Tank capacity: 1300 liters Generator manufacturer: LEROY SOMER Type: LSA 44.3L10 C 6/4 - Compact design with soundproofed metal enclosure and centrally mounted lifting eye - Robust, galvanized base frame with forklift pockets for easy and safe transport by forklift - Socket connections: 1x 230 V Schuko / 1x 16 Amp. 3-pin blue / 1x 32 Amp. 3-pin blue - Socket connections: 1x CEE 16 Amp. 5-pin red / 1x CEE 32 Amp. 5-pin red / 1x CEE 63 Amp. 5-pin red / 1x CEE 63 Amp. 5-pin red - 2 starter batteries, 12 Volt each, for 24 Volt starter motor - 11,755 operating hours as of April 2019 - Missing components on the engine: 6 fuel injectors missing, 6 high-pressure pipe connections missing, 1 injector tip missing Bjdpfx Abexr N U Sebjlr Dimensions (L x W x H): 3600 x 1230 x 2450 mm Weight: approx. 3450 kg Engine can be cranked by the starter, fuel is being delivered.

Condition: new, Year of construction: 2025, Starter Packages Powder Coating Starter sets or individually designed packages for starting your own business in surface technology, e.g. for coating alloy wheels: The package includes two sample configurations for entering powder coating or expanding an existing business. Our focus is on customized consulting tailored to the customer’s budget and requirements. Modifications and special requests are standard with us. Proven, robust and low-maintenance technology is at the center of our offer. Set 1: - Powder curing oven, internal dimensions 2,000 x 1,900 x 2,000 mm - 150 mm thick mineral wool wall insulation for energy-efficient and cost-saving operation - 36 kW thermal output for rapid heat-up time - Oil, gas, or electric heating options - 6,000 m³/h recirculating air (2.2 kW) for efficient heat transfer to workpieces - Up to 220°C - Powder coating booth (open spray booth) Powder booth dimensions: - Width: 2,100 mm - Depth: 2,000 mm - Height: 2,200 mm - Fan: 6,000 m³/h, electric motor 3.0 kW for a clean working environment - Filters: 4 units, ø 325x600, cartridge type with interval-controlled self-cleaning - Secondary filtration via pocket filters - Powder coating system Wagner, manual system “Sprint 2 B” - Latest model from premium manufacturer Wagner for optimal coating results (other brands available upon request) Bledjbqk Nbepfx Abbor - Corona manual gun - PEM-C4 Ergo - EPG-Sprint control unit - Powder feed system with Fluid Crown ST 550/10 - Powder injector PI-F1 - Equipment trolley with vibrating table Set 2: - Powder curing oven, internal dimensions 1,500 x 1,200 x 1,750 mm - 150 mm thick mineral wool wall insulation for energy-efficient and cost-saving operation - 14 kW thermal output for rapid heat-up time - Electric heating - 2,600 m³/h recirculating air (1.1 kW) for efficient heat transfer to workpieces - Up to 220°C - Powder coating booth (open spray booth) Powder booth dimensions: - Width: 1,200 mm - Depth: 1,100 mm - Height: 2,380 mm - Fan: 2,500 m³/h, electric motor 1.1 kW for a clean working environment - Filters: 2 units, ø 325x600, cartridge type with interval-controlled self-cleaning - Secondary filtration via pocket filters - Powder coating system Wagner, manual system “Sprint 2 B” - Latest model from premium manufacturer Wagner for optimal coating results (other brands available upon request) - Corona manual gun - PEM-C4 Ergo - EPG-Sprint control unit - Powder feed system with Fluid Crown ST 550/10 - Powder injector PI-F1 - Equipment trolley with vibrating table

Condition: used, mileage: 902,600 km, power: 368 kW (500.34 HP), first registration: 03/2019, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 11,425 kg, empty load weight: 6,575 kg, tire size: 315/70 R22,5, next inspection (TÜV): 03/2026, fuel consumption (urban): 598 l/100km, wheelbase: 1 mm, driver cabin: other, gearing type: automatic, suspension: steel-air, total length: 5,984 mm, number of seats: 2, lifting height: 3,100 mm, Equipment: ABS, air conditioning, differential lock, hydraulics, parking heater, Unladen weight: 6,575 kg, permissible total weight: 18,000 kg, tyre size: 315/70 R22.5, 1st axle: , 2nd axle: , velour seats, leaf-air suspension, tachograph, fifth wheel coupling, electronic braking system (EBS), air-suspended driver's seat, radio, power steering, fog lights, electric exterior mirrors, immobiliser, central locking, tinted windows, sun visor, clutch – injectors – steering knuckles – turbo – particulate filter NEW at approx. 600,000 km, without retarder, non-binding offer, errors and prior sale reserved. Image may not correspond to the offer. Blodpfx Aoxwq Ecjbbor

Condition: used, machine/vehicle number: 007870, Max. panel width: 3200 mm No of Bottom Units: 2 Bledpswimz Hefx Abbor No of injectors: 7

Condition: good (used), mileage: 1,170,000 km, first registration: 05/1999, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 870 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, Year of construction: 1999, Equipment: ABS, air conditioning, differential lock, electric window regulation, spoiler, = Additional options and equipment = - 2 bunks (sleeping berths) - 870 liter fuel tank - Aluminum fuel tank - Heated exterior mirrors - Power brake booster - Comfort driver's seat - Roof spoiler - Differential lock - High beam headlights - Speed limiter - Sleeper cab - Sun visor - ZF16 manual gearbox = Remarks = GOOD CONDITION DAF FT95-380XF SPACECAB 4x2 TRACTOR UNIT (EURO 2) WITH ZF16 MANUAL GEARBOX, ROOF SPOILER & AIR CONDITIONING!! 380HP, EURO 2 (MECHANICAL PUMP AND INJECTORS)!! ZF16 MANUAL GEARBOX!! D.E.B ENGINE BRAKE!! 870 LITER DIESEL TANK!! AIR CONDITIONING!! SPOILER ON CAB!! ETC!! TRUCK IS IN GOOD RUNNING CONDITION, READY FOR HEAVY-DUTY JOBS!! MORE DAF CF/XF 4x2 / 6x2 / 6x4 / 8x4 (EURO 2/3/4/5/6) IN STOCK FOR SALE!! (>85 TRUCKS/TRAILERS IN STOCK)!! SHIPPING, STACKING, LOADING, TRANSIT REGISTRATION OR TRANSPORT? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! YOU CAN ALSO CHECK OUR WEBSITE; ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" Blodjuy Ixtepfx Abber = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,580 cc Transmission Transmission: ZF16 manual gearbox, 16 speeds, manual transmission Axle configuration Tyre size: 315/80R22.5 Brakes: Drum brakes Front axle: Max. axle load: 7,500 kg; Steering; Tyre tread left: 30%; Tyre tread right: 30%; Suspension: leaf springs Rear axle: Twin tyres; Differential lock; Max. axle load: 13,000 kg; Inner left tyre tread: 20%; Outer left tyre tread: 20%; Inner right tyre tread: 20%; Outer right tyre tread: 20%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,620 kg Payload: 11,380 kg Gross vehicle weight: 19,000 kg Functional Cargo compartment capacity: 870 l Brand of superstructure: ZF Condition Technical condition: good Visual condition: good Identification Registration number: BH-SN-04 Further information Please contact Sales Department or Erik Engel for more information.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 2,615 mm, total length: 1,650 mm, total width: 1,277 mm, wall thickness: 2 mm, input voltage: 400 V, overall weight: 450 kg, space requirement height: 2,850 mm, usable tank capacity: 1,000 l, rotational speed (max.): 1,450 rpm, REISCHL RMA 1000 – Advanced Stainless Steel Brine Mixer with HMI, Emergency Operation & High-Performance Flow Cooling Intelligent • Hygienic • Future-Proof Technical Highlights – RMA 1000 Bledpfsw T R Hajx Abbsr Smart HMI Control: Intuitive user interface for fast operator training and reliable processes. Emergency Operation: In case the touch panel fails, all functions remain accessible via robust mechanical buttons—maximum operational safety. Process Data Acquisition & Reporting: Complete batch documentation and export functionality. Remote Support: Global remote access for rapid assistance with zero downtime. Flexible Mixing System: Venturi principle for liquids and viscous solids (including scale ice). Stainless Steel Centrifugal Pump: Reliable, durable, hygienic. Hygienic Design: Lever locks, smooth surfaces, height-adjustable feet. High-Performance Flow Cooling System: 1,000 litres from 15 °C to 0 °C within 15 minutes—fast and reproducible. Options: Insulated cooling jacket, automatic flow measurement, brine residue recovery, various pump configurations. Your Benefits Increased Efficiency: Automated, reproducible mixing and cooling processes. Operational Safety: Production continues even if the HMI fails thanks to emergency operation. Documented Quality: Quality assurance documentation at the push of a button. Future-Proof: Modular expandability and software updates available. Easy Integration: Perfectly matched to injectors and process lines. 👉 Price & details on request. Contact us for your customised offer—we will configure the RMA 1000 to perfectly suit your production line.

Condition: used, mileage: 1,022,720 km, first registration: 03/2015, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, total width: 2,550 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, According to our "General Terms and Conditions of Sale" and subject to change without notice, we can offer you the following vehicle as available today, with no warranty or guarantee of any kind, and subject to prior sale, errors, or typos: Mercedes Benz 2545 Interchangeable Chassis (Vehicle 886) First registration: 27.03.2015 1,022,720 km Engine: 12,809 cc 330 kW / 450 HP Euro 6 Diesel Roof spoiler, sun visor A-sign + folding hazardous goods sign LED daytime running lights Additional headlights Full air suspension Tyres: 315/70R22.5 1st axle approx. 30/40%, 2nd axle steer axle approx. 90/90%, drive axle approx. 90/90%, 3rd axle approx. 70/70% Multi-lift system for standard and large swap bodies Spier body 2 x trailer couplings (1 x standard + 1 x low) (no trailer included) Long-distance cab with 1 bed Automatic climate control, auxiliary heater Bedexw I Axopfx Abbjlr Fully automatic transmission Multifunction steering wheel 2 x electric windows, mirrors, heated mirrors Manual roof hatch Radio/CD/two-way radio Central locking with remote control Refrigerator 2 x chocks Plastic storage box (closed, passenger side, center) 1 x LED work light at rear Folding A-sign and hazardous goods sign No trailer included New injectors and oil pump replaced in 04/2024 Price: €14,000.00 (net) All information provided without guarantee or warranty. Our “General Terms and Conditions of Sale” apply. The court of jurisdiction for both parties up to a value in dispute of €5,000.00 is the Local Court of Ludwigslust; for higher values in dispute, the Regional Court of Schwerin. Subject to change, errors, and prior sale.

Condition: used, Spare parts for blast machine or blast wheel Gutmann Type: AGS SWL 501 Bsdpjbfkbbefx Abbolr Throwing blades Blast wheel housing Injector Blast wheel Elevator bucket Wear plates etc.. NEW!

Condition: used, Year of construction: 2007, operating hours: 3,608 h, Drive: Track Serial number: XN7DC1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18436 Specifications: - 2007 model Bljdevgzqrjpfx Abbsr - 3608 hours - 17042 Kg - 116 kW - Width of Doser 301 cm - Width of doses with shear approx. 380 cm - Belt width: 86 cm - Tilt cylinders - 6 Way Function on grader blade - Good undercarriage (see pictures) - New undercarriage (g tt approx. 300 hours) - Lever steering - Service history - Ready for delivery Description: New Holland Doser with new undercarriage and 6-way function. The undercarriage has run about 300 hours since it was replaced. 2 injectors have been changed. It comes with spare parts when sold. Some repair cost to be expected Ready for delivery Hours: 3608 Own weight: 17042 Total Weight: 17042 Kw: 116 Model: D150B

Condition: used, machine/vehicle number: 006163, Max. panel width: 3200 mm No of Bottom Units: 3 Bljdpjiwpt Uofx Abbjr No of injectors: 6

Condition: excellent (used), mileage: 871,500 km, first registration: 07/2001, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 870 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, Year of construction: 2001, Equipment: ABS, air conditioning, differential lock, electric window regulation, retarder, spoiler, = Additional Options and Equipment = - 2 beds - 870 liter fuel tank - Aluminum fuel tank - Heated exterior mirrors - Driver comfort seats - Roof spoiler - Differential lock - Electrically adjustable exterior mirrors - High beam headlights - Speed limiter - Intarder - Radio/CD player - Sleeper cab - Sun visor - ZF intarder Bedpfouy Iy Rox Abbjlr - ZF16 manual gearbox = Remarks = GOOD CONDITION DAF FT95-430XF SPACECAB 4x2 TRACTOR UNIT (EURO 2) WITH ZF MANUAL GEARBOX, ZF-INTARDER, ROOF SPOILER & AIR CONDITIONING!! 430HP, EURO 2 (MECHANICAL PUMP AND INJECTORS)!! ZF16 MANUAL GEARBOX!! ZF-INTARDER!! 870 LITER DIESEL TANK!! AIR CONDITIONING!! ROOF SPOILER ON CABIN!! ETC!! TRUCK IS IN GOOD DRIVING CONDITION, READY FOR HEAVY DUTY JOBS!! MORE DAF CF/XF 4x2 / 6x2 / 6x4 / 8x4 (EURO 2/3/4/5/6) AVAILABLE IN STOCK FOR SALE!!

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 2,250 mm, total width: 1,015 mm, total height: 1,980 mm, warranty duration: 24 months, overall weight: 850 kg, input voltage: 400 V, type of input current: AC, conveyor belt length: 1,630 mm, compressed air connection: 6 bar, product height (max.): 230 mm, tank capacity: 160 l, construction width: 420 mm, air pressure: 7 bar, number of injections: 55, conveyor belt width: 405 mm, Equipment: documentation/manual, REISCHL RPI 62/123 – High-Precision Injector with Smart HMI & Remote Maintenance The RPI 62/123 is more than just a classic injector: it combines robust mechanics with state-of-the-art software for maximum efficiency in food processing. ⭐ Your advantages at a glance Intuitive operation – no training required, ready to use immediately Global remote maintenance – service in minutes instead of days of downtime Bodpew Rf Srjfx Abbjlr Automatic reporting – comprehensive quality assurance & documentation at the touch of a button Future-proof – modular expansion, add-ons can be retrofitted at any time 🚀 Why choose RPI? Other injectors work – but are often complicated and difficult to maintain. 👉 In contrast, the RPI is as easy to operate as a smartphone and as connected as a modern industrial plant. “Service call? Instead of 3 days of downtime, we provide remote support in 30 minutes.” “New requirements? Simply book an add-on—no need for a new machine.” 🔧 Technical highlights Stitch pattern: 62/123 needles Applications: meat, poultry, fish, vegan proteins Precise feed system for even brine distribution Energy-saving LEAN drive Precision needle heads with quick-change bridge system Pneumatic suspension for each individual needle – ideal for bone-in products Stainless steel centrifugal pump with triple filtration system (mechanical/automatic) Hygienic design: complete separation of pump circuit and electromechanics Easy to clean, low-maintenance, long service life 📍 Suitable for Medium to large production lines Meat, poultry, fish, and protein processors Businesses focused on consistent quality and digital control

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Fomaco salt injector mod FGM 64 SW in very good condition together whit associated cleaning system. Year of construction 2000 128 needles 4 mm. Beam width 55 cm. Bedpfx Ajxrntgobbolr

Condition: used, Year of construction: 2008, operating hours: 11,320 h, Serial number: VCEC210CC0012xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18846 Specifications: Certified until 11/2025 Year: 2008 Hours: approx. 11,320 Bljdpjww Ahxefx Abbjr Power: 110 kW Operating weight: approx. 23,200 kg New tracks and sprockets – approx. 200 hours of use New injectors New seal in dipper cylinder Engcon tiltrotator with grapple Grading bucket and digging bucket Central lubrication S70 quick coupler Track width: approx. 60 cm Machine width: approx. 300 cm Extra work lights Radio/CD A/C and heating Undercarriage: see pictures Description:Volvo EC210CL crawler excavator from 2008 offered on behalf of customer.Delivered with valid certification and ready for work.Comes with digging bucket, grading bucket, and Engcon tiltrotator with grapple.Undercarriage recently renewed, new injectors installed, and latest service performed by Volvo.Available for quick delivery. Hours: 11320 Own weight: 2770 Total Weight: 23200 Width: 300 Kw: 110 Model: EC210CL

Condition: used, machine/vehicle number: 005448, Max. panel width: 3000 mm Blodpfxjwcydzj Abber Max. panel length: 1350 mm No of injectors: 24

Condition: used, machine/vehicle number: 006158, Max. panel width: 1000 mm Max. panel length: 2500 mm Bedpfx Aboiwptuobelr No of injectors: 14 Positioning of Units by NC: yes