Used Pelletmaker Pm 22 E for sale (75,220)

Condition: excellent (used), For sale: a SEW-EURODRIVE RF43 DT71D4 geared motor with a three-phase motor with a power of 0.37 kW. The unit is fully functional, tested, and ready for operation. The technical condition is very good; visually, it has normal signs of use resulting from operation. The geared motor is equipped with a cylindrical gearbox with a B5 mounting flange, making it ideal for driving conveyors, feeders, production machines, and other industrial equipment. Technical specifications: Manufacturer: SEW-EURODRIVE Gearbox type: RF43 Motor type: DT71D4 Power: 0.37 kW Power supply: 3×220/380 V, 50 Hz Hjdpfxsznv Haj Aicsfk Motor speed: 1380 rpm Output speed: 22 rpm Output torque: 137 Nm Design: IM B5 Protection class: IP54 Insulation class: B Power factor: cos φ 0.70

Condition: new, MPM 3.SU340SM4 unbalance measuring device SN:3.502.22.2004, unused with storage marks, 100% functional, delivery scope as shown in the photos. Hfodpjx Et N Nsfx Aicek

Condition: ready for operation (used), AGIE 622064.4 Step Motor Driver Isotorque MJG2129E, serial number as shown in the photo, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Hfedpfxji D Tvgo Aicsk

Condition: ready for operation (used), Parker PRM2PP1 0JV with Wandfluh MVPPM22-100-D1#1 24V DC proportional valve, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hjdpji Ecc Rsfx Aicefk

Condition: ready for operation (used), Parker PRPM2PP1 0JV with Wandfluh MVPPM22-100-D1#1 24V DC proportional valve, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hfsdji Ecc Uepfx Aicok

Condition: new, MPM 3.SU340SM4 unbalance measuring device SN:3.502.22.4107, unused with storage marks, 100% functional, delivery as per photos. Hedpfx Aijx Et Rascjfk

Condition: ready for operation (used), Agie MJG 2129 D stepper motor driver, part number 622064.4. Used, shows minor signs of wear, 100% functional. Scope of delivery as shown in the photos. Hfsdpsi D Twzofx Aicek

Condition: new, Graco Monark 222839 Series H07A air-powered pump with 222791 air motor, serial number as shown in the photo, unused and in opened original packaging, 100% functional. Hfjdpfxoi Eaclo Aicjk

Condition: excellent (used), For sale: a Lenze geared motor with a worm gear. The unit is 100% functional, tested, and ready for operation. The technical condition is very good, with only normal signs of wear and tear resulting from use. It is ideally suited for driving conveyors, feeders, industrial machines, mixers, and other devices requiring a reliable drive with high torque. Technical specifications: Manufacturer: Lenze Motor type: DERA 071-22E Gearbox type: GSN04-1NHAR Power: 0.37 kW (50 Hz) Power supply: 3×230/400 V Frequency: 50 Hz Motor speed: 1400 rpm Output speed: 140 rpm Gear ratio: i = 10 Torque: 22 Nm Protection class: IP55 Insulation class: F Manufacturer: Lenze, Austria Condition: 100% functional – tested. Normal signs of use. Hfedpjznb Ivefx Aicek Sold exactly as shown in the photos.

Condition: excellent (used), Compressor refrigeration Hfodpfjxxcahex Aicsk

Condition: new, table length 1500 mm Hfjdpfxsy N D N Uj Aicsk table width 1500 mm table height 150 mm bore 22 mm weight 543 kg

Condition: excellent (used), fuel type: diesel, color: yellow, first registration: 01/2018, Year of construction: 2018, Drive: Track Unladen weight: 30,000 kg Technical condition: very good Visual condition: very good Price: On request CATERPILLAR PM 622 ASPHALT MILLING MACHINE Hsdpfx Aieuxu Eqocofk 4 x track drive Working width: 2235 mm Working depth: 0-330 mm 193 milling picks Hydraulically foldable discharge conveyor CAT Grade Control automatic levelling 2 x operator consoles with LC display Hydraulically liftable side plates Rear-view camera Weather protection roof, foldable Driver's seats Work lights Cleaning system CAT Diesel engine, C18 622 HP Original paint FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, Year of construction: 1998, load capacity: 2,200 kg, construction height: 510 mm, construction width: 1,200 mm, Multi-pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Hfodpfst S N Dgex Aicjk Technical condition: good Description: ISO 3A (51 cm) Capacity 2200 kg Opening range 560-2010 mm Forks 1200 mm Width 1200 mm Year 1998 mm

Condition: new, For sale: high-quality electric motor from the renowned brand WEG, Premium IE3 series. Hfedpfjyvamnsx Aicsk The motor is new, unused, and has been stored in a warehouse – condition is very good. Ideal for pumps, fans, industrial machinery, and workshop applications. ⚙️ Technical specifications Manufacturer: WEG Model: AL90S L 02 Power: 2.2 kW Speed: 2855 rpm Voltage: 230 / 400 V Frequency: 50 Hz Current: approx. 7.8 / 4.5 A Efficiency class: IE3 Degree of protection: IP55 Duty type: S1 Flange version: B5 Shaft diameter: approx. 24 mm Weight: approx. 22 kg Year of manufacture: 2018

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,470 kg, fuel type: diesel, tank capacity: 230 l, color: beige, power: 27.21 kW (37.00 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 17 kW (23.11 HP), nominal power (apparent): 22 kVA, continuous power: 20 kW (27.19 HP), continuous power (apparent): 20 kVA, total length: 2,800 mm, total width: 1,063 mm, total height: 1,703 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, AVS Diesel Generator DW 20 CU 15 AK14A PRP Power: 16 kW / 20 kVA ESP Power: 17.6 kW / 22 kVA Engine: Cummins 4B3.9G11 Emission Stage: - Speed: 1,500 rpm Mechanical speed governor Hsdpfxswu D Une Aicefk Operating voltage: 12 V Cooling: water-cooled Generator: Stamford PI114D Voltage: 400/231 V Control panel: InteliLite AMF Type: canopy set; weather-protected, sound-insulated • Emergency stop switch • Radiator with mechanical fan • Base frame design with integrated fuel tank (230 L) and forklift pockets • Voltage and frequency regulation according to ISO 8528-5 • Unit intended for stationary use only Please note that these units are not approved for mobile use in accordance with the applicable EU regulation. The units are sold as B-grade goods. B-grade means that the units may show cosmetic imperfections such as surface rust or rust on the enclosure. These defects do not affect the function or performance of the units in any way. By accepting this offer, you explicitly acknowledge the described properties of the units and their stated condition.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Holp MultiGrip Bucket / MG.022.055 / MS01 / 550 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €2,400.00 net / €2,856.00 gross - Suitable for excavators up to: 2.2 tons - Weight approx.: 80 kg - SAE capacity: 53 liters - Cutting width: 550 mm - Max. opening: 530 mm - The bucket is manufactured entirely from HARDOX. - The MultiGrip combines a digging bucket and a grab in a single attachment. Advantages of the Holp MultiGrip Bucket: - Cylinder with hardened piston rod - Only the grab rotation lines are required for operation - Robust bearing within the side wall - Secure gripping and transport - Sturdy shafts connect both claws (forming a three-point grip for smaller items) - Significantly lighter than a grab - Can hold up to 30% more soil during digging operations compared to standard buckets - Reduces damage from falling debris Hfsdpfxsyl Hdlj Aicsk The MultiGrip is suitable for all digging and grabbing tasks, making it ideal for relocating stones, backfilling soil, as well as gripping wood and brush. It operates significantly faster than a conventional grab. It can pick up and sort all kinds of material, including soil and grass. Thanks to its unique shape, the MultiGrip bucket offers superior penetration and handles bulky material with ease. We stock many more immediately available Holp products in our inventory! Feel free to contact us at ... We are also happy to provide you with a financing offer upon request. We are an official sales and service partner for: - Holp - OilQuick - Weber MT - Magni telehandlers - DMS - Seppi M. - Westtech - JCB construction machinery - Mercedes-Benz - Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range! Subject to errors and prior sale. == More Information == New: Yes Application: Construction Unladen weight: 80 kg For more information, please contact Marius Herden.

Condition: used, Year of construction: 2015, Recycling system for recovering and separating plastic and rubber products from textile reinforcements, such as various types of rubber hoses, PVC, tarpaulins, banners and other plastic materials in which textile reinforcement occurs. The system cooperates with a granulation group and a separation system. Hourly capacity: 50 - 80 kg/h Infeed dimensions: 270 x 120 mm + fi 80 mm Blade length: 3x2 + 2x2 Rotor diameter: 250 mm Cutting length: 600 mm Engine power: 22 kW Dimensions: 3200 x 3000 mm Height: 2500 mm Weight: 1000 kg Year of production: 2015 Technical condition: used machine, all engines in working order. No top cap with dimensions: 400x300 mm used for loading the product. Full and original technical documentation available. . Hodpfowpkw Ejx Aicjfk

Condition: used, Year of construction: 2005, operating hours: 160 h, machine/vehicle number: RS000562, Size 36 x 52 cm, CPtronic, Easyplate, Alcolor dampening system, banket wash, impression cylinder wash, segmented ink blades, Baldwin cooling and recirculation system. Hodpfxoztappj Aicjfk

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 22 mm Hodpfjzucchjx Aicofk -Dimensions: see photo technical drawing -Overall dimensions: 65/70/H60 mm -Total weight: 1.3 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/65/H55 mm Hedpfszubwqsx Aicefk -Total weight: 1.5 kg

Condition: ready for operation (used), CMC MTE2620-169BF PM servo motor, serial number as shown in the photo, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hfedpfx Aioi D Hn Aocsk

Condition: ready for operation (used), Seidel 65WKS-M310/22-V3 – 65WKS-M310/22-V3 servo amplifier, 5.9 kVA, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as per photos. Hfedpfx Aoi Ec N Ssicjk

Condition: ready for operation (used), Siemens 6ES7478-2BA00-0AC0 E-Stand 2 expansion module, serial number SVPH3227452, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hodpfxoi Eduvs Aicofk

Condition: ready for operation (used), Rexroth MSK070C-0450-NN-M1-UP0-NNNN, 3-phase synchronous PM motor, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as per photos. Hfsdsi D Nngepfx Aicjk

Condition: ready for operation (used), Seidel 65WKS-M310/22-V3 - 65WKS-M310/22-V3 servo amplifier, 5.9 kVA, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hedpfji Ec Rlox Aicjfk