Used Pbt 25 for sale (15,235)

Condition: refurbished (used), functionality: fully functional, overall weight: 1,150 kg, total length: 1,680 mm, total width: 1,250 mm, total height: 1,390 mm, Year of construction: 2008, operating hours: 882 h, input frequency: 50 Hz, shaft diameter: 105 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, Profile bending machine PBT25 PC400 (will be refurbished, including a new Y-axis measuring device) For sale is a profile bending machine PBT25 with PC300 control, manufactured in 2008. The machine will be completely refurbished and technically inspected by PBT before sale. Technical data: Fodpfx Aoz Ak I Ieikepp Machine type: Profile bending machine Manufacturer / Model: PBT25 Control: PC300 (upgrade in 2026) Year of manufacture: 2008 Operating hours: approx. 882 hours Condition: Good condition. Fully functional. Availability: Approximately two weeks. Further technical details and specifications according to the manufacturer can be found on pbt-ag.com.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 250 mm, stroke length: 250 mm, throat depth: 365 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 560 mm Y-axis travel: 450 mm Z-axis travel: 250 mm Stroke: max. 250 mm Overhang: max. 365 mm Table diameter: 500 mm Table length: 500 mm Table width: 500 mm Table depth: 500 mm MACHINE DETAILS Control system: Conventional Model: Vertical Fedps Af Hdbsfx Aikopp Number of axes: 3 Power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,600 x 2,350 mm Net weight: 3,000 kg Number of transport packages: 1

Condition: ready for operation (used), functionality: fully functional, actuation type: hydraulic, number of rollers: 3, shaft diameter: 105 mm, empty load weight: 1,000 kg, TECHNICAL DETAILS Power: 3.0 kW Shaft diameter: 105 mm Number of rollers: 3 Number of driven rollers: 3 MACHINE DETAILS Control: Conventional Drive: Hydraulic Vertical/Horizontal: Horizontal Dimensions & Weight Dimensions (L x W x H): 1,400 x 900 x 1,300 mm Unladen weight: 1,000 kg Fpodpfxszdd N Ns Aikop EQUIPMENT Additional rollers

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11.878, Year of construction: 2008, operating hours: 24,200 h, load capacity: 2,000 kg, lifting height: 4,720 mm, free lift: 1,590 mm, mast type: triplex, fork length: 1,090 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,720 mm Free lift: 1,590 mm Load capacity: 2,000 kg Fork length: 1,090 mm Fork width: max. 970 mm Fork width: min. 250 mm MACHINE DETAILS Mast type: Triplex Fuel type: Liquefied petroleum gas (LPG) Engine manufacturer: Toyota Dimensions & Weight Dimensions (L x W x H): 3,640 x 1,150 x 2,130 mm Unladen weight: 3,864 kg Fedpfs Af Hg Nox Aikopp Operating hours: 24,200 h EQUIPMENT Side shift Work lights CE marking Documentation

Condition: excellent (used), Year of construction: 1998, control type: CNC control, actuation type: hydraulic, controller manufacturer: BC-100, number of rollers: 3, shaft diameter: 105 mm, pipe diameter (max.): 105 mm, overall weight: 1,600 kg, total length: 1,600 mm, total width: 1,200 mm, total height: 1,300 mm, Equipment: emergency stop, Profile bending machine PBT Indumasch - 25 BC-100 MACH-ID 9877 Make: PBT Indumasch Type: 25 BC-100 Control: BC-100 Horizontal and vertical:Horizontal Shaft Ø: 105mm Number of rolls: 3 Stroke X-Axis: 265mm Capacity flat: 120 x 15mm Capacity Tube: 114 x 5Ø x mm Fsds Agvu Rspfx Aikspp Working speed: 0-5mm/min. Adjustment siderolls: 350 Force upperroll: 27 t Control: 4285H Side supports: yes Length: 1600mm Width: 1200mm Height: 1300mm Weight: 1600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 100 h, input voltage: 415 V, input frequency: 50 Hz, pressing force: 120 t, stroke length: 500 mm, table width: 1,300 mm, table length: 2,500 mm, throat depth: 1,000 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 1,000 mm, total length: 3,000 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 2,900 kg, Equipment: CE marking, SCM Sergiani PF Cold Platen Press, New 2021, Model PFH DIGIT 25/13 Platen area 2500 x 1300 mm, with 6 x 90 mm dia chromed hydraulic cylinders giving 120 tons pressure via a double rack and pinion system connected by a torsion bar to grant a planar movement of the movable press platen. Controlled by Siemens colour touch screen control panel. Suitable for pressing plasics, composites, wood inc door panels etc and some light sheet metalwork. Fedpfxj Ad Hats Aikjpp

Condition: good (used), Year of construction: 2021, DIXI FP 25 drum compactor Fjdpfx As Ai Ay Rsikjpp - Year of manufacture: 2021 - Power: 5.5 kW - Voltage: 400 V - Pressing force: 25 tons - Suitable for 200-liter drums.

Condition: used, functionality: unexamined, Year of construction: 2012, Available for shipment. Fjdpfx Aisyup R Tjkspp Machine is operational condition. Ask for additional information including photos and pricing!

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Vertical insulating glass production line for max. glass sizes : 3500 x 2500 mm working size : from right to left min. glas size : 380 x 150 mm glass thikness : 2,3 - 17 mm IG element thikness : 12-60 mm Fedpfe Ahyaaox Aikepp - vertical glasswashing machine with 6 brushes - frame setting station - gasfilling press - tilting station - vertical sealing robot - butylextruder LBH 25 V - frame bending machine BSV 30 K , max. frame : 4400 x 2200 mm , min. 240 x 170 mm alu-steel , chromatec ultra , workign direction from left to right - desiccant filling machine A1RL max. frame : 2500 x 1200 mm , min. 150 x 150 mm , for alu spacer 6-24 mm

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Used Blue Mac 2510 Static Trommel Year 2016 10 M Long x 2.5 M Diameter 50mm Round Holes, 8mm Thick All New Drive Shafts & Wheels Fpedpjzzrwbsfx Aiksp 4 x 5.5kW Electric Motors / Bonfiglioli Gearboxes 21 Tonne Weight Excellent Condition Ready To Go To Work

Condition: excellent (used), Year of construction: 2020, 2020 Haas ST-25 CNC Slant Bed Lathe & Tooling Package Haas Autogrip 3H-H12 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Maximum Cutting (Varies With Turret) Ø381mm. Bar Capacity Ø76mm. Axis Traverses 'X'=236mm, 'Z'=527mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,400rpm (22.4kW Motor). Spindle Nose A2-6. 12 Station Turret. Power On Hours 1,979. S/No. 3119435 (2020). Fedpfjz Rqmrjx Aikjpp With Coolant System (Tank Capacity 208L), Marposs Tool Setting Arm, Tailstock, Footswitches, Signal Tower, Tooling Package (Turning Tools, Jaws, Collets & coolant Fixings) & Manual. Machine Foot Print W3,630 x D2,290 x H2,340mm. Weight 4,536kg.

Condition: used, Year of construction: 2015, Length 12000 mm Width 9000 mm Fsdj Ahkkhspfx Aikspp Used manual overhead conveyor system with a SCHUKO paint mist extraction unit and a warm-air supply system. Includes a cross-flow heat exchanger (heat recovery) and a manual overhead conveyor; in very good, well-maintained condition. Manufactured 2015–2016. ----- Sold on behalf of a client! The system is still in operation and available for inspection. Price is ex-site; dismantling to be performed by the buyer ((Scissor lift and forklift available on-site)). Group 1: Dry-type paint mist extraction system, model FARBMEISTER: ----- Model FARBMEISTER-25/30, including a stationary paint mist extraction wall with dry-type filtration. Baffle/filter area: H x W 2,790 x 3,140 mm (cardboard filter cells). Features a centrally positioned, solid baffle panel designed to reduce the maximum required airflow, tailored to the specific frames and casements being painted. Includes an additional pull-down pre-filter. This reduces the effective extraction area—and consequently the total airflow—from a standard ~14,000 m³/h to the required 10,500 m³/h. Also includes a 250 mm deep extension around the perimeter (left, right, and top) to improve the capture of overspray. A high-performance centrifugal fan (model L-EX 500) with a 5.0 kW motor, capable of an exhaust air volume of 10,500 m³/h (free-blowing), including all necessary ductwork and components to construct and install the extraction system—extending through the wall to the outside—as well as a manually adjustable exhaust air damper. Group 2: Warm Air/Supply Air System for the Spray Booth: ----- BB 1,100 warm air/supply air system for the spray booth, including a supply air unit (model WZL110-com) equipped with an integrated heating coil (hot water connection, supply temperature +80°C). The unit has an air capacity of 10,500 m³/h and a 5.0 kW motor. The required heating capacity, based on a temperature differential (Delta-T) from -15°C to +22°C, is 137 kW. The system features an automatic louver damper at the air intake to seal off the ductwork and prevent cold air from entering when the system is not in operation. It also includes an explosion-proof warm-air thermostat designed to shut down the system in the event of a loss of heating capacity (hot water supply). This group encompasses all ductwork and supply air components, spanning from the external air intake to the air outlets in the distribution ceiling located above the spray wall. A cross-flow plate heat exchanger for heat recovery from the exhaust air duct leading outdoors, while simultaneously preheating the fresh air drawn in from outside. With an exhaust air temperature of +20°C and a fresh air temperature of -12°C, this results in an energy saving of approximately 58 kW of heating capacity. Includes all necessary duct and pipe components for integrating the exhaust and supply air lines with the plate heat exchanger, in accordance with the attached planning drawing. Also includes a maintenance/repair switch and a differential pressure monitor for supervising the intake filter. Please note that the heat exchanger core must remain easily accessible for routine maintenance and cleaning. Group 3: Electrical System Control for Paint Mist Extraction: ----- Electrical system control for paint mist extraction...

Condition: used, Year of construction: 2004, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center Fpodjz Ih A Djpfx Aikjp 4 Axes: X, Z, C, B Type: TL 25 BTM Year: 2004 CNC: GE Fanuc Series 18i-TB Video Available Inspection Possible Jaw Chucks: Included ✅ Tool Holder: Included ✅ Documentation: Included ✅ Chip Conveyor: Included ✅

Condition: used, functionality: fully functional, turning diameter over bed slide: 2,500 mm, total length: 3,750 mm, total width: 850 mm, total height: 1,350 mm, spindle speed (max.): 1,000 rpm, Global Nordic 25 lathe. Equipped with a three-jaw chuck, a four-jaw chuck, an eccentric four-jaw chuck, and various drills. 18 speeds. Hollow spindle, 78 mm. Speed n=rpm 12.5. Fedpo Aa Iygefx Aikspp 400V.

Condition: used, Year of construction: 1979, functionality: fully functional, working width: 250 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 160 mm, overall weight: 10,000 kg, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: mechanical, planer shaft diameter: 50 mm, type of input current: three-phase, table length: 1,000 mm, number of spindles: 9, input frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 30 kW / 6 - 65 m/min, Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-left (11 kW) Fodeqvml Repfx Aikopp Jytnaq 4-Left (7.5 kW) 5-Right (7.5 kW) 6-Top (7.5 kW) - with hydraulic clamping 7-Top (15 kW) - with hydraulic clamping and straight jointer 8-Bottom (11 kW) - with hydraulic clamping and straight jointer 9-bottom (11 kW) - with hydraulic clamping and straight jointer 8 driven rollers in the table

Year of construction: 2012, condition: used, An egg breaking machine is offered. Processing capacity: 900-9000 eggs/hour. Controls: control panel with start/stop buttons, speed controller and display. Equipped with a two-row egg breaking system, roller feeder and mobile base frame. Inspection possible by arrangement. Fodpo Ahq Nnofx Aikjpp

Condition: used, Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, PLATEAU DIAMETER: 2000 MM MAXIMUM LATHE DIAMETER: 2500 MM MAXIMUM LATHE HEIGHT: 1800 MM RAM SECTION: 240 X 240 MM CNC: FANUC 18i TB NOTE: A MAGNETIC PLATEAU IS CURRENTLY MOUNTED ON TOP OF THE MAIN PLATEAU. Fodps Ah H Aksfx Aikjpp MACHINE IS STILL POWERED ON.

Condition: used, Year of construction: 1984, Design: swiveling Swiveling angle forward: +45° Swiveling angle backward: -5° Table length: 2200 mm Table width: 1100 mm Extendable frame support: Yes Selection of spindle speeds: belt changeover + pole change Taper of the milling spindle: MK 5 Diameter of the milling arbor: 30 Material of the stand: steel Fodpfx Ae Ai Ec Doikspp Position of the control panel: bottom Height adjustment of the spindle: electric Swiveling adjustment of the spindle: electric Spindle locking: manual Spindle brakes: electric Dust extraction diameter of the milling fence: 120 mm Spindle direction of rotation: left/right Motor power: kW Electric axes: swiveling / up / down adjustment Closing of the table opening: insert segment Design of the fence jaws: Aigner fence system Fence adjustment: manual Milling fence adjustment: manual Weight approx.: 1200 kg Dimensions: 2200 x 1500 x 1600 mm Location: Nattheim

Condition: used, functionality: fully functional, Year of construction: 2007, Used 3-meter guillotine shears from HM Type: MPS 30 25 Fpjdpj Ahgtxsfx Aiksp Capacity: 3100 x 2.5 mm (steel) Mechanically driven (40 strokes/min) Adjustable back gauge Year of manufacture: 2007

Condition: ready for operation (used), Year of construction: 2008, Available immediately ex-works: Fpodpfx Ao Afcmxoikop CNC press brake AMADA Type HFT 80 - 25 Year of manufacture 2008 Touchscreen control Pressing force 80 tons Working length 2570 mm Distance between uprights 2125 mm Overhang 420 mm Approach speed 100 mm/s Working speed 10 mm/s Retraction speed 100 mm/s Stroke 200 mm Overhang 420 mm Drive power 9 kW Weight 5750 kg Complete set of tooling Price: EUR 19,500.00 plus VAT, ex-works.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Machine type: Tool milling machine Manufacturer: Infratirea Oradea Type: FUS 25 Year of manufacture: 1986 Machine number: 2,628 WORKING AREA Travel X-axis: approx. 400 mm Travel Y-axis: 300 mm Travel Z-axis: 300 mm TABLE Table dimensions: 860 × 400 mm Number of slots: 6 Fjdpj Ad Avwefx Aikepp SPINDLE Tool holder: SK 40 MACHINE DETAILS ELECTRICAL DATA Operating voltage: 400 V Frequency: 50 Hz DIMENSIONS AND WEIGHT Length: 1,500 mm Width: 1,200 mm Height: 1,800 mm Weight: 1,000 kg EQUIPMENT 3-axis digital display Mounted machine vise Vise jaw width: 160 mm

Condition: excellent (used), Eccentric press Inv. No. 3945 Manufacturer: Ter Hart Fsdpfo Af Uuxjx Aikspp Type: EP 25 * Pressing force: 25 tons * Stroke adjustment: 6 - 60 mm * Adjustable ram: 35 mm * Table dimensions: 330 x 230 mm * Installation height: 275 mm * Overhang: 180 mm * Foot pedal operation * Weight: 750 kg

Condition: good (used), Year of construction: 1980, machine/vehicle number: BS 2, Offer 25278 Approximate technical specifications: - Drilling capacity in steel ST 60: 25 mm - Drill spindle mount: MK 3 - Drill spindle stroke: 220 mm - Overhang min. / max.: 240 / 750 mm - Stroke of the arm: 600 mm - Min. / max. distance spindle – baseplate approx.: - 1050 mm - Machined baseplate clamping surface: B 620 - T 800 mm - Baseplate / table height / foot height: 380 mm - Spindle speeds: 30 - 1100 rpm - Feeds Fedpfx Aj Ai Ddxjikspp - Drill spindle drive: 400 V - Indexing table - Space requirement approx.: W 1350 x H 2000 – 2400 x D 650 mm - Weight approx.: 1200 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 11,262 h, load capacity: 2,500 kg, lifting height: 4,800 mm, free lift: 1,450 mm, fuel type: gas, mast type: triplex, construction height: 2,240 mm, motor manufacturer: VW, fork length: 1,200 mm, tire condition: 90 %, front tire type: superelastic tires (black), front tire size: 27 x 10 - 12, rear tire type: superelastic tires (black), rear tire size: 23 x 9 - 10, overall weight: 4,455 kg, total height: 2,240 mm, total length: 2,650 mm, total width: 1,200 mm, fuel: liquid petroleum gas (LPG), Equipment: cabin, sideshift, LINDE H 25 T - 02/600 – LPG forklifts TECHNICAL DATA Lifting capacity: 2.500 kg Lifting height: 4.800 mm Closed height: 2.240 mm Fsdpfxs Ail Umo Aikjpp Free lift: 1.450 mm Mast: Triplex (3F480) Fork length: 1.200 mm Fork carriage: 2 A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 27 x 10 - 12 (90%) / 23 x 9 - 10 (80%) Service weight: 4.455 kg Length: 2.650 mm Width: 1.200 mm Year of manufacture: 2016 Operating hours: 11.262 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Load backrest, Full cabin ATTACHMENTS Load backrest, Sideshift, Fork positioner Internal no.: 1202077 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, spindle mount: MK 3, Meyer Geared Head Pillar Drill Model:SR25 Spindle Taper: No 3 Morse Spindle Speeds:125-2825 RPM Fpodpszrnndofx Aiksp Table Area:350 x 400mm (Hand rise and fall / Swivel) Throat:240mm Motor: 0.75 KW With: Chuck Guard Safety Brake Low-Voltage Light Dimensions: 700 x 450 x 1900mm High Weight: 400 KGS