Used Pelletmaker Pm 22 E for sale (75,375)

Condition: good (used), functionality: fully functional, machine/vehicle number: zcfb1hf8002145558, mileage: 27,568 km, power: 160 kW (217.54 HP), first registration: 08/1995, fuel type: diesel, tire size: 10R22.5, axle configuration: 4x4, color: red, Year of construction: 1995, - All-wheel drive - 1600-liter water tank - Fire pump FPN 16/8 - Lighting mast - Ladder - Spare tire available - 2 vehicle keys - New TÜV inspection upon request Sold as is Subject to prior sale and errors Sale exclusively subject to our terms and conditions Important note – Important information: Despite careful review of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Iodpfx Ajzblk Asatjif Legal: This sales advertisement does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Rather, it provides information for initiating a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, controller manufacturer: SIEMENS, controller model: 840 D, spindle speed (max.): 12,000 rpm, It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Additional equipment • Pallets: 22 of size 800x800 Machine Benefits Technical Machine Benefits • Pressure: 70 bar on both machines • Tool systems: 2 x 234 hsc 100 • Mch 350 c = 8000 rpm Extra Information MCH 300 Usage: 29000 hours MCH 350 C Usage: 22105 hours Iodpfjx D Skmox Aatsif

Condition: used, Year of construction: 2001, total length: 13,500 mm, total width: 4,500 mm, Equipment: documentation/manual, type plate available, For sale from the laundry. Iijdpfx Aov Nbxneatof Complete, working Kannegiesser mangle line (pair). Working width: 3000 mm. Full technical documentation. Composition: 1. EMD feeder - universal, manual and automatic feeding, 2 feeder paw stations, stretching brushes and arms for lifting heavy elements. 2. HPM double-shaft mangle - 2 x Ø1200 mm shaft, stainless steel basin, good mangle quality. Additional option for gastronomy. 3. RFM reversible folder - precise folding with 2 longitudinal and 3 transverse folds, with an additional track for smaller elements. Stacker Year of production: end of 2001 Technical condition: as after taking over from the laundry, efficient, in use until the end of February 2025, regularly maintained. Required space: approx. 13 m × 4.5 m, Required power 39 kW Why is it worth it? - Kannegiesser brand – leader in the laundry ironing industry. - Easy availability of service and parts: service also in Poland. - High efficiency and precision: ideal for large quantities of flat laundry. - Price-to-capacity and quality ratio. A new one is worth over €400,000. Starting price: €69,900 net Do you have any questions? Do you want to know more? Contact us – we will be happy to provide additional information and send you technical details.

Condition: good (used), Year of construction: 1979, functionality: fully functional, Four-sided planer / moulder Unimat 22N, 7 spindles Year of manufacture 1979 S/N 286512746 Manufacturer Weinig Germany planing width 220mm Planing height 120 mm 7 planer shanks: planing table length 2000mm Spindle arrangement (speed of the working spindles 6000 rpm) 1. bottom, 4 kW 2. left, 5,5kW 3. right, 7.5 kW 4. left, 4 kW 5. top, 7.5 kW 6. bottom, 7.5 kW 7. bottom, 4.0 kW 5, 6, 7 with counter bearing 3 rollers in the table (not driven) spindle diameter 40 mm Flying circle of the dressing spindle 125mm Flying circle of the dressing spindle 100-180mm Iedst Eu Htepfx Aatoif Largest flying circle of the milling spindles 180mm Cardanic feed Feed infinitely variable (frequency converter) 6-36 m /min. Manual Waxilit pump External dimensions L 4500 mm x W 1600 mm x 1700mm 4500 kg with 7 planer/knife heads included

Condition: used, This listing is for a Vibra HTR-220E Balance Iodpfxsxzg Tks Aatsif

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth, 1 set -Jaw width: 22 mm -Attachment: Material: Aluminum -Dimensions: see photo technical drawing -Transport dimensions: 270/95/H70 mm -Total weight: 2.5 kg Iedpfx Aaozlc E Rjtsif

Condition: used, This listing is for the Sartorius Tare ENTRIS2202-1S Balance The unit is in full working condition and is ready for immediate use The Sartorius ENTRIS2202‑1S (also referred to as ENTRIS 2202‑1SUS in some regions) is a precision top-loading laboratory balance designed for reliable, accurate weighing of samples up to approximately 2,200 g with 0.01 g readability. Key Specifications: Capacity: 2,200 g Readability (Resolution): 0.01 g (10 mg) Repeatability: Typically 0.01 g Linearity: Approximately 0.03 g Weighing Pan Size: Around 182 mm × 182 mm (7.1″ × 7.1″) Calibration Type: External calibration (requires separate calibration weight) Display: Backlit, high-contrast screen for clear visibility Interface Options: RS‑232 port for communication with PCs or printers Built-In Functions: Includes modes for basic weighing, counting, percent weighing, animal weighing, and density determination Language Support: Multiple languages supported such as English, French, German, Italian, Polish, Russian, Spanish Other Features: Anti-theft locking capability, easy-to-clean removable pan and draft shield Iisdpfoxhfffjx Aatjf Stabilization Time: Approximately 1.5 seconds Dimensions & Build: Compact size, robust design ideal for lab environments

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 1350U TRIPALET, MANUFACTURED IN 2011 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL Isdpfjy Tv Nbjx Aatsif TRAVEL: Z 1350 AND 1150, Z 895, A +16°/-120°, C ±360° SPINDLE: 24,000 RPM, 38 KW, HSK-A63 (NEW) TABLE: DIAMETER 1100, MAXIMUM LOAD 1600 KG 46-TOOL CHANGER 3-PALLET CHANGER, 1000 x 840 MM RENISHAW OMP60 PART PROBE LASER TOOL MEASUREMENT APS - Advanced Process System APS Extended ITS - Intelligent Thermal Control CINEMATIC OPTIONS CHIP CONVEYOR WITH TSC MACHINE WEIGHT: 19,000 KG

Condition: good (used), Year of construction: 2012, overall weight: 3,000 kg, year of last overhaul: 2025, Equipment: CE marking, - HOMAG KAL211 EDITION 2264 Year of manufacture: 2012 OVERVIEW OF AGGREGATE CONFIGURATION: - Control: powerControl PC22 - Top pressure with composite V-belt - Feed rate: 18 - 25 m/min - Workpiece thickness: 60 mm instead of 40 mm - Total length: 7845 mm - Electronic height adjustment FPR/L260+EDITION+FSQ - Quick-clamp system for application unit QA/PU - Separator spraying unit above/below - Jointing milling unit - Gluing station A20 with Quickmelt application unit - Magazine 2 manual, 2 rolls - Preparation for Lasertec activation unit - End trimming unit HL84 chamfer/straight - Automation package chamfer/radius AMB/EDITION2264/74 - Pre-milling unit BF10 1.5 kW - Contour milling unit FK11 manual - Profile scraper PN10 - Finishing unit - Glue joint scraper - Buffing unit Isdpsyz Dbbefx Aatjif - Drying box with nitrogen

Condition: like new (used), Year of construction: 2016, operating hours: 1,176 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model: LINDE T 20 * EX * Proplan 3GD / Zone 2 & 22 ID: 25070.8807 Category: Demo Forks: 1150 x 560 mm Capacity: 2000 kg Iijdpfx Ajzutzzjatsf Year: 2016 Hours: 1176 hours Battery: Completely NEW * 24V / 230Ah * Year 2025 Options: Special build! With hydraulically tilting forks! For example, for emptying IBCs *EX* Proplan! System = ATEX 14 Proplan 3002 X Type = Cat 3G (approved for ZONE 2) Gas group = IIB Temperature class = T4 Type = Cat 3D (approved for ZONE 22 – dust) Gas group = IIIB Temperature class = T 135°C

Condition: used, Year of construction: 2022, Lot consists of: (1) Injection molding machine, temperature control: HB Therm | Miscellaneous: 1x conveyor unit by Motan Technical Details: Power supply: AC400V 3P/N/PE Frequency (Hz): 50 Current (A): 228 Installed power (kW): 137 Motor power (kW): 63.5 Heating power (kW): 33 Short-circuit rating (kA): 25 Screw diameter (mm): 65 Injection unit: 2230 Machine weight (t): 22.0 Iisdpjy N R Htofx Aatjf

Condition: used, Year of construction: 2000, Empty weight: 22.000 kg Working width: 1500mm Working length: 2160mm Max. thickness: 2mm With Supply-station infeed. - Year: 2000 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 12/50 - Drive system: CNC - Power [kW]: 18.0 - Max. sheet thickness [mm]: 2 - Max. working width [mm]: 1500 - Options: Loading system Iisdpfx Aaezrd Iaotjf - Transport weight [kg]: 22000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2006, load capacity: 240 kg, arm reach: 2,800 mm, controller manufacturer: KUKA, controller model: KRC2 ed05, The KR360 is designed for a rated payload of 360 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR360 L240-2 (MORE option is also available) Condition: Used & Tested Year: 2006 (More options are also available) Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant - FULL SET Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website) Iodpfjw H Ny Hjx Aatjif

Condition: like new (used), Year of construction: 2016, operating hours: 708 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model: LINDE T 20 * EX * Proplan 3GD / Zone 2 & 22 ID: 25070.8428 Category: Demo Forks: 1150 x 560 mm Capacity: 2000 kg Year: 2016 Hours: 708 hours Battery: Completely NEW * 24v / 230Ah * Year 2025 Iiodpfx Aajzutzustsf Options: Special build! With hydraulically tilting forks! Ideal for example for emptying IBCs * EX * Proplan! System = ATEX 14 Proplan 3002 X Type = Cat 3G (approved for ZONE 2) Gas group = IIB Temp class = T4 Type = Cat 3D (approved for ZONE 22 – Dust) Dust group = IIIB Temp class = T 135°C

Condition: like new (used), Year of construction: 2016, operating hours: 570 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 1,670 mm, Manufacturer + model: STILL EXV 14 * EX * Miretti - 3D / Zone 22 Mast: 2F2350 ID: 23121.4034 Category: Demo Mast: 2F2350 Lowered height: 1670 mm Iedpfx Aajzutz Ietoif Lifting height: 2350 mm Capacity: 1400 kg Year: 2016 Operating hours: 570 hours Battery: Completely NEW 24V / 375Ah * year 11/2023 Options: * EX * MIRETTI !!!!! System = Miretti AR 16 ATEX 015 Gas group = IIIB Temperature class = 266°C Type = Cat 3D (approved for ZONE 22) POWER STEERING Complete LIKE NEW !!

Condition: used, Year of construction: 1986, year of last overhaul: 2004, CLEARANCE SALE WILL BE SOLD TO HIGHEST BIDDER ON 'FIRST COME - FIRST SERVE BASIS' ; IMMEDIATE SHIPPING POSSIBLE Iijdsy A S Thspfx Aatjf LIST OF OTHER MACHINES FROM SAME MILL AVAILBLE UPON REQUEST TEXTILE FABRIC STENTER – MONTFORTS MONTEX 12 G/K For sale: Montforts Montex 12 G/K textile fabric stenter line, well-equipped and suitable for drying, finishing, coating, and fabric straightening applications. Machine details Make: Montforts Model: Montex 12 G/K Year of manufacture: 1986 Major overhaul: 2004, including replacement with economical type burners. After few years was preserved and stored. Refurbished: 2008, then preserved Working width: 220 cm Drying chambers: 6 Heating: Liquid gas and natural gas Fabric conveying system: Horizontal chain, pin and clip Accessories and additional equipment Küsters foulard Isotex coating unit, model SR Mahlo straightener, model RFMC-74 AN Selvage cutting units 2 cooling cylinders Chemical station with tanks: 1300 L, 1100 L, 2 x 500 L All tanks fitted with mixers Heat recovery system installed above the drying compartments MACHINE IS REFURBISHED , PROFESSIONALLY MARKED, DISMANTLED, STORED IN MILL-FLOOR - VIDEO AVAILABLE For more information, technical details, photos, or video , please get in touch. Shipping possible immediately.

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, The Lamina Gluer is a manual fed in-line folding, gluing and taping machine. In very good technical condition, after total renovation. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc. Machine in is at our premises, testing on-site is possible. Max Sheet Size: Width: 2200 mm (87") Min Sheet Width: 70 mm (3") Electrics: 208 V, 3 phase, 60 cycle; or 400 V, 3 phase, neutral, 50/60 cycle; or Specified Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 50 L/min Iijdpfeyzfkkex Aatsf

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, power: 26.6 kW (36.17 HP), load capacity: 600 kg, lifting height: 20,000 mm, lifting power: 600 kg/m, platform length: 4,300 mm, platform width: 1,190 mm, overall weight: 12,350 kg, empty load weight: 12,350 kg, transport length: 4,720 mm, transport width: 1,250 mm, transport height: 2,990 mm, construction height: 3,820 mm, fuel type: electric, tire size: 28 × 10 – 22 (Non-marking), tire condition: 100 %, wheelbase: 3,180 mm, ground clearance: 200 mm, color: red, Equipment: UVV, all wheel drive, tilting carriage, === KEY SPECIFICATIONS === Year: 2020 Operating hours: 8 h Machine width: 1.25 m Drive system: 4x2 Drivable at full height: Yes Platform extension: Yes (1.8 m) Power: 26.6 kW total (lifting 2×8.0 kW + driving 4×3.3 kW) Working height: 22.0 m Platform capacity: 600 kg Power type: Electric Battery type: Lead-acid 48V / 630Ah Self-levelling outriggers: Yes (standard) Platform size (L × W): 4.30 × 1.19 m Tyres: Non-marking CE certified: Yes Weight: 12,350 kg Indoor / Outdoor use: Both === HIGHLIGHTS === Selected from trusted sources with verifiable history CE certification and full documentation included Ready for immediate use and transport Zero-emission, quiet electric operation Iiodpfexb S Rnjx Aatof Extendable platform (1.8 m) for extra reach === CONDITION === Excellent condition, only 8 operating hours. Original batteries tested and in top condition. Available immediately from stock in Sittard. === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). The Magni ES 2212 E is a fully electric scissor lift offering 22 meters working height and 600 kg platform capacity. Its compact and emission-free design makes it perfect for indoor industrial and maintenance use. CE-certified, low-maintenance, and ready for operation. === DELIVERY === Crane loading available on request. Flexible delivery options based on destination and logistics preferences. All transport handled professionally by Collé Rental & Sales logistics team.

Condition: good (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, total width: 2,400 mm, The Lamina Gluer is a manually fed, in-line folding, gluing, and taping machine. Thanks to its smart design, it can handle different sizes and materials. Iijdpfxsxwcwwj Aatjf Tool-free setup enables quick changeovers, even for short production runs. Optional machine features include cold glue, rear support unit, working station, tape applicator, and more. The Lamina Gluer is a straight-in-line gluing machine built on a robust frame made of extruded, anodized aluminum profiles. The machine offers manual feeding as standard, with an optional automatic feeder for die-cut, creased, and slotted materials. The operator positions the blanks, and the hot melt unit applies adhesive as the material passes through the machine. Glue line length and exact position can be pre-set using a programmable logic controller (PLC) and a touchscreen interface. A system of pressure rollers ensures perfect adhesion and guides glued blanks onto a pull-out tray, which is easily adjustable for various sizes. The machine comes equipped with adjustable and interchangeable side guides, enabling efficient gluing of 2-piece boxes. The Lamina Gluer is supplied ready for connection to electric and pneumatic systems. The Lamina Working Station is an additional option for the Lamina Gluer. Products are fed through the Gluer, which applies pre-programmed glue lines, and continue into the Working Station, where they are positioned on vacuum belts. A second piece is mounted and positioned using side lays and pneumatic stops for high-quality finishing. The unit can be adjusted for a wide range of products, from single- to multi-part displays and boxes, large back supports, shelves, and more. Transport The material is conveyed by four vacuum belts that bring the sheets to a stop bar for subsequent operations. The vacuum is generated by a fan that secures the sheets for optimal handling and precise registration. During production, the operator has full access above the sheets for additional mounting, thanks to the vacuum belt design. Pressure Rollers Material passes through two pressure rollers at the machine’s end for optimal adhesion. Registration Registration accuracy is +/- 1 mm and is achieved by a combination of photocell sensors and pusher guides. The operator uses a side lay guide to simplify the mounting process at the station.

Condition: like new (used), Year of construction: 2017, operating hours: 633 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 1,680 mm, Manufacturer + model: STILL EXV 14 C * EX * Miretti 2G / Zone 1 - 3D / Zone 22 * Mast: 2F2350 ID: 26082.2204 Cat.: Demo Mast: 2F2350 Forks: 1250 mm Lowered height: 1680 mm Lifting height: 2350 mm Capacity: 1400 kg Year: 2017 Hours: 633 hours Capacity: Complete NEW * 24v / 240ah * Manufactured 04/2026 Options: * EX * MIRETTI - E7936 Ijdpozutxtefx Aatjif System / Certificate = TUV - CY 16 ATEX 0205756 Gas group = IIB Type = Cat 2G (permitted in ZONE 1 and 2) Temperature class = T3 Gb Dust group = IIIB Type = Cat 3D (permitted in ZONE 22) Temperature class = 200*C ( = T3) C - Db

Year of construction: 2018, condition: new, functionality: fully functional, machine/vehicle number: 218224, Abrasion testing machine from ABREX. The machine is new and was purchased a few years ago. Operating hours: 0 hours, as we no longer have any use for this machine. Iiodpfx Aezlz Rroatsf Delivery conditions: Self-collection in Königsbach-Stein.

Condition: used, Year of construction: 2003, Offset 2 color Ryobi 522HE Year: 2003 Number of impressions (mio): 21 Machine control - Lateral and diagonal register adjustment - Size adjustment by means of pre-programmed sheetstop Feeder - Streamfeeder - Double sheet control Printing units - Number of printing unit(s): 2 - Straight machine - Ryobi RPC semi automatic plate change - RyobiMatic dampening - Impression cylinder with double diameter - Automatic inking roller washing device - Cooling system: Technotrans alpha.d Delivery - Powder spray - Anti static device Isdpoxzppzsfx Aateif Accessories - Chromed cylinders Max. output (s/h): 11000 Max. sheet size (mm): 520 x 375 Min. sheet size (mm): 100 x 105 Max. print size (mm): 505 x 350

Condition: like new (used), Year of construction: 2016, operating hours: 930 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer & model: LINDE T 20 * EX * Proplan 3GD / Zone 2 - 22 ID: 25050.8953 Category: Demo Iiedezuudqepfx Aatof Forks: 1150 x 560 mm Load capacity: 2,000 kg Year: 2016 Operating hours: 930 hours Battery: Completely NEW * 24v / 230ah * Year 2025 Options: Special construction with hydraulically tiltable forks! Ideal for emptying IBC containers * EX * Proplan! System = ATEX 14 Proplan 3002 X Type = Cat 3G (approved for ZONE 2) Gas group = IIB Temperature class = T4 Type = Cat 3D (approved for ZONE 22 – dust) Gas group = IIIB Temperature class = T 135°C

Condition: used, Year of construction: 2009, total height: 2,500 mm, total length: 40,500 mm, total width: 2,400 mm, Colour: Blue Empty weight: 30.900 kg Price: On request 4 tool changers, 24 pcs each Plus external magazine 117 positions Drilling unit 2, 4x horizontal only Incl. Oertli tools Max. machining length 6 meters NEXUS Software (HMI) Output table 320x360 cm Operating hours cannot be read out - Year: 2009 - Documentation available: Yes Iedpszt Nadefx Aatsif - CE marking present: Yes - CE certificate present: No - Serial number: 113040 - Number of milling spindles [pcs.]: 6 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Min. spindle speed [rpm]: 0 - - Max. spindle speed [rpm]: 18000 - - Main motor power [kW]: 20 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - └ Milling spindle 3: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - └ Milling spindle 4: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - Tool holder: HSK-F63 - Drilling unit present: Yes - └ Motor power [kW]: 2.5 - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 6 - Tool changer positions [pcs.]: 24 - System/software: Nexus - Safety feature: Door interlock switches, Enclosed fence - Tools included: Yes - CNC options: Unloading system, Label machine, Loading system - Table length [mm]: 6000 - Table width [mm]: 3800 - Installed length [mm]: 26000 - Installed width [mm]: 9500 - Installed height [mm]: 2850 - Transport dimensions: 40500mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 30900kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2016, operating hours: 101 h, load capacity: 1,400 kg, lifting height: 2,900 mm, fuel type: electric, mast type: duplex, construction height: 1,920 mm, Manufacturer + model: STILL EXP 14 ATEX * EX * Mitrex - 2GD - Zone 1 and 21 and 22 Mast: 2F2900 ID: 22123.0042 Category: Demo Mast: 2F2900 Lowered height: 1920 mm Lifting height: 2900 mm Capacity: 1400 kg Year: 2016 Operating hours: 101 hours Battery capacity: 24 V / 345 Ah Options *EX* Mitrex !!!!! System = ATEX 94/9/EC - Compliant with 2014/34/EU Gas group = IIB + IIIB Iiodpfx Aajzutw Netsf Type 2GD - Exd dB 11B T5 Gb (approved for Zone 1 and 21 and 22) Temperature class = T6 (85°C) Wide track *EX* version - Proportional lifting & lowering valves - with free-floating adjustable forklift forks - Suitable for all types of pallets - Also equipped with Adjustable support legs Power steering