Used Paper Drill for sale (7,059)

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,800 mm, stack height: 1,500 mm, Think Green, Box On Demand, pay attention to your CO2 footprint. The machine for processing continuous corrugated board, listed here, belongs to the series of statically operating machines, meaning that the operations performed across the width of the machine are carried out on the stationary cardboard. The machine is designed for high productivity. The maximum working width of the cardboard is 1,800 mm. All tool settings are performed automatically. 1) Main machine body (cardboard cutting machine): Linear cross-cutting group for head/foot cuts and cross cuts on the cardboard. Linear cross-scoring group for cross scoring on the cardboard. (Delivered as a cross scorer, cross scorer with perforation option) 8 sets of longitudinal scoring groups from above for longitudinal scoring on the cardboard. 8 sets of longitudinal cutting groups for performing longitudinal cuts. Gjdpfx Aoz Tdaqoikebw 2) Cardboard changer, 4-cassette feeder A motorized cardboard changer, operated with a lifting shaft, is used to feed the cardboard into the cardboard infeed of the main machine body, using 4 individual cassettes. Each cassette is capable of accommodating a web width of raw material up to a maximum of 1,800 mm and automatically feeding it to the main machine body on request from the machine control. 3) Cardboard magazines, 4-fold 4 cardboard magazines provide and feed the raw cardboard to the processing machine. Stack height of continuous corrugated board up to max. 1,500 mm possible. 4) Control cabinet, control system, electronics: Contains all the components required to operate and control the system. The control cabinet components are based on Siemens.

Condition: used, empty load weight: 7,440 kg, axle configuration: 3 axles, first registration: 08/2019, next inspection (TÜV): 04/2027, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2019, ref: F0866723 Equipment: * Air connection: Red/Yellow coupling, * Electrical connection: 1 x 15-pin, * ABS, * EBS, * Customs cable, * Railway coding, * Device for railway loading, * Side impact protection, * Wheel chocks: 2, * Access ladder, * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, * Sliding tarp, * Tensioning bar for sliding tarp, * Multilock, * Floor: Plywood floor, * Insertion strips (aluminum): 32, * Customer labeling VIN: WKESD00000866723 Tire dimension: 385-65 R22.5 Internal length: 13.62m Width: 2.55m Gedsz Sd Awspfx Aikobw Internal width: 2.48m Height: 3.97m Internal height: 2.65m

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 130 mm spindle taper SK 40 spindle turning speed range 70 - 3200 U/min 520 mm 230 mm table surface area 730 x 210 mm connected load frequency 400 V total power requirement 1,1/1,5 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,1 x 0,9 x 1,15 m Gbjdpjfv H Hqefx Aiksw domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 130 mm spindle taper SK 40 spindle turning speed range 75 - 3200 U/min 500 mm 230 mm table surface area 720 x 210 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 1,1 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Gbjdpfefv H Huox Aiksw Machine base optional.

Condition: new, Drilling capacity in cast iron / steel ----- 28 / 25 mm Tapping capacity in cast iron / steel ----- 22 / 18 mm Godpfx Aega T D Nsikjbw Motor ----- 1.1 kW Speed range ----- 75 ~ 3200 rpm Spindle stroke ----- 130 mm Spindle taper ----- MK3 Drill table ----- 380 x 380 mm Base ----- 535 x 360 mm Maximum distance spindle - table ----- 825 mm Maximum distance spindle - base ----- 1220 mm Weight ----- 210 kg INCLUDED * LED work light * Tapping function * 2-speed motor 75-3200 rpm * CE plug * Various tools in a case

Condition: new, WMD25LV - 230V / 1Ph Drilling capacity in steel ----- 25 mm Milling capacity in steel ----- 20 mm Face milling ----- 63 mm Motor ----- Brushless 750W Spindle speed, continuously variable 50 - 3000 rpm Spindle stroke ----- 50 mm Spindle taper ----- MK3 Work table ----- 700 x 180 mm Cross travel ----- 150 mm Longitudinal travel ----- 490 mm T-slots ----- 3x12 mm Overhang ----- 170 mm Distance spindle - table ----- 325 mm Weight ----- 160 KG STANDARD ACCESSORIES * Drill chuck incl. chuck key * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head, left / right, rotatable 90 degrees Gbedpfsga T Eijx Aikow * Box with various tools OPTIONAL * Base cabinet € 249.00 excl. VAT

Condition: new, Motor ----- 1100W - 400V - 3-Phase Drilling capacity ----- 32 mm Spindle stroke ----- 120 mm Spindle taper ----- MK4 Number of speeds ----- 12 Spindle speed ----- 150-2450 rpm Work table ----- 470 x 420 mm Base ----- 580 x 430 mm Column diameter ----- 92 mm Overall height ----- 1720 mm Weight ----- 128 kg Packaging ----- 1430 x 660 x 320 mm Gbodpfx Asga T Hrsikow INCLUDED * Digital depth stop * CE guard * Laser device * LED lighting * CE emergency stop * Drill chuck with MK4 taper * Ejector pin

Condition: excellent (used), HEIDENHAIN TNC-310 Working travels 500x260x480 mm (+ spindle stroke 160 mm) Gbsdpfx Aiefrbtdeksw cross table 880x320mm additional with Manual hand wheels Spindle speeds 100-9000 Rpm Misc accessories MARCELS MASCHINEN CH

Condition: new,

Condition: used, Drill sleeve, MK 4 Length 170 mm Diameter 63 mm Gbodpeb Tyqaefx Aikew

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW Gbodpfjfg U Tpox Aiksw weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 0,6 x 1,2 x 2,6 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever Gjdsfg U Ttjpfx Aikobw - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, Motor: 750W - 230V - 1 Phase Drilling capacity: 20 mm Spindle stroke: 85 mm Spindle taper: MK2 Number of speeds: 16 Spindle speed: 220-2840 rpm Work table: 305 x 305 mm Base: 460 x 280 mm Column diameter: 72 mm Overall height: 990 mm Weight: 60 kg Packaging: 820 x 500 x 290 mm INCLUDED * Digital depth stop * CE protective shield * Laser guide Gedek Iuqyjpfx Aikobw * LED lighting * CE emergency stop * Drill chuck with MK2 taper * Ejector pin

Condition: new, bore capacity in steel (diameter) 40 mm throat 275 mm bore stroke 120 mm spindle taper MK 4 turning speed range 75 - 3200 U/min 190 mm 490 mm table surface area 700 x 210 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 1,1/1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank Gbjdpfx Aeupw Uzoiksw

Condition: new, bore capacity in steel (diameter) 16 mm throat 180 mm bore stroke 85 mm spindle taper MK 2 spindle diameter 47 mm spindle turning speed range 320 - 3300 U/min 230 mm 100 mm table surface area 420 x 155 mm connected load frequency 230 V 900 x 600 x 300 cm total power requirement 0,75 kW weight of the machine ca. 8o Kg dimensions 0,7 x 0,7 x 0,8 m Drilling and milling machine - Cross Support Gjdpfoupxcyox Aikobw - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, grinding range 2 - 13 mm Gbodpfxoupxdqo Aikjw sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 10 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: new, bore capacity in steel (diameter) 45 mm quill stroke 125 mm 560 mm 230 mm table surface area 800 x 240 mm spindle turning speed range 75 - 3200 U/min max. milling cutter diameter 80 mm spindle taper ISO 30 max. distance between table and spindle-nose 460 mm throat 230 mm connected load frequency 400 V total power requirement 1,5 kW weight of the machine ca. 580 Kg dimensions of the machine ca. 1,2 x 1,0 x 2,1 m Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. Godpfjupxrnjx Aikobw tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box.

Year of construction: 1987, condition: used, 1 Bench drill ALZMETALL AX 3SV, serial number 5739, year of manufacture 1987. Gbedpfx Aioi Apu Tekow

Condition: reconditioned (used), functionality: fully functional, Drilling Machine Brand: GSP Model: 407C22 Reach: 2250 mm Drilling capacity (steel): - Normal feed: 70 mm diameter - Slow feed: 90 mm diameter Carriage travel on arm: 1900 mm Drilling radius (min. - max.): 630 - 2500 mm Gbsdjy D Hr Uspfx Aiksw Height (min. - max.): 500 - 1750 mm Vertical arm travel: 850 mm Spindle stroke: 400 mm Spindle speeds: 25 to 1400 rpm Motor power: 6 kW Spindle taper: MT 5

Condition: used, Year of construction: 1989, bore capacity in steel (diameter) 32 mm arm length 1230 mm Gbedpfey Aa H Nex Aiksw table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 60 - 1800 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device

Condition: used, tool diameter: 25 mm, drilling depth: 180 mm, actuation type: manual, rotational speed (max.): 1,510 rpm, table width: 390 mm, table length: 2,080 mm, Brand: Erlo Model: TC-25 (3 units) Transmission: Gear-driven Feed: Manual Capacity: 25 mm Drilling depth: 180 mm Morse taper: 3 Speeds: 8 (96 - 1510 rpm) Gbodsy Av Ebspfx Aiksw Coolant system. Table dimensions: 2080x390 mm Minimum distance from drill chuck to table: 300 mm Maximum distance from drill chuck to table: 700 mm Drill with manual elevation. Drill elevation travel: 400 mm

Condition: used, Year of construction: 1960, Technical details: Gbsdox Afn Nopfx Aikew workpiece height max.: 600 mm Arm length: ca. 700 mm bore capacity in steel (diameter): 25 mm Table dimensions: 1100 x 400 mm

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1000 workpiece height max.: - mm column diameter: 300 mm horizontal adjustment of the boring slide: 400 mm distance table - lower edge spindle: 200 mm spindle taper MT: MK 4 bore spindle stroke: 200 mm range of revolutions per minute - continous: 18steps 14-710 U/min swivel range of the arm: 360 Grad feed: 0,09/0,12/0,25/0,5 mm/U weight of the machine ca.: 2,0 t dimension machine xH: 2,4 x 0,9 x 2,4 m Transportable! Operation via pressure switch Support feet 4x D=16x30mm Height-adjustable 60 mm with ratchet wrench * Gbsdpfx Aiov S Ay Sekew

Condition: used, Year of construction: 1986, Technical details: bore capacity in steel (diameter): 18 mm throat: 250 mm bore stroke: 100 mm drill capacity in cast iron: Ø 23 mm spindle taper MT: MK 2 Gbsdpfxowiwwfe Aikew spindle speed:: 400 - 630 - 1000 - 1600 - 2500 U/min feed: manuell mm/U Distance spindle/table max.: 75 / 605 mm table clamping surface:: 250 x 250 mm column diameter: Ø 90 mm total power requirement: 0,55 kW weight of the machine ca.: ca. 170 kg dimension machine xH: 0,4 x 0,8 x 1,8 m

Condition: used, Boring power 23.0 / 28.0 mm Boring depth max. 140 mm Center of spindle to wall or column 300 mm Column diameter 125 mm Size of table plate 415 x 385 mm Speed 100 - 2000 U/min. spindle taper MT 2 MK voltage 380 V Motor output 0.9 / 1.4 KW weight of the machine ca. 225 kg Dimensions (L/W/H) 900 x 600 x 1960 mm maintained condition (!!) Furnishing: - V-belt operated column drilling machine - Right/left running of the work spindle - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 2x T-slots - Table height adjustment via hand crank - machined base plate with 3x T-slots - manual V-belt tension (front handwheel) - Connection cable including 16A plug * Machine link: Gbjdpfx Aoxabbysikew ?machineno=1008-9103760