Used Paper Drill for sale (7,373)

Condition: used, operating hours: 20 h, Fuel type: Diesel Iodjuu Df Dspfx Aacoih

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. Iijdpfx Aaoxppwnecoh 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, I have x3 items for sale in this listing, see below for info. x1 Boxed brand new and never used Konica Minolta MB-511 multi-bypass tray. These are compatible to use with the Konica Minolta C7090/7100 and C12000/C14000. See pictures. Originally purchased to facilitate a new contract that never materialised in the end. This was purchased just over 12 months ago so will not have any manufacturer warranty. Iodpexc Hayofx Aacjih x1 Unboxed but brand new and never used Konica Minolta PF-712 Paper Deck. These are compatible to use with the Konica Minolta C7090/7100 and C12000/C14000. Originally purchased to facilitate a new contract that never materialised in the end. This was purchased just over 12 months ago so will not have any manufacturer warranty. Some light scratches on top of deck due to being stored with boxes on top. See pictures x1 Open box but brand new and never used Fiery IC-318 PS Colour Server/RIP for use with Konica Minolta C12000/C14000. Video Interface Kit is also included This was purchased just over 12 months ago so will not have any manufacturer warranty. If you know what you are looking at then you know how expensive these are so grab yourself a bargain. I've been told these can be upgraded to the latest IC-319's, however i cant guarantee that so do your own research if this is what you intend to do. All items are in the UK for collection. Delivery can be arranged at your expense and items will need to be paid for in full before shipped. These are genuine items for sale from a genuine seller/business. The items are left over from a business that has closed/ceased trading. Any questions please ask and thanks for taking a look. The price is for all 3 items in the listing. These are advertised elsewhere.

Condition: new, FACTORY-NEW T-TYPE FLOOR TYPE MILLING MACHINE HEIDENHAIN TNC 640 digital contouring control HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis travel: 4,000 mm Z-axis travel: 1,500 mm Y-axis (cross-ram): 1,300 mm V-axis (cross column): 1,000 mm Rotary table (C-axis): 2,000 x 2,000 mm Max. load capacity up to 15,000 kg Iiedpfxeq I Nkbs Aacoh Automatic universal swiveling head 1° x 1° (optionally with fixed ram Ø 210mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS - internal coolant supply - 36 bar Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Tool changer: 60-position chain magazine (vertical / horizontal change) Double hinged belt chip conveyor (longitudinal) Perimetric guarding (open at top) Only inquiries from Germany will be processed.

Condition: good (used), Year of construction: 2001, functionality: fully functional, KAMPWERTH SHD 1600 horizontal baler, incl. 3 interchangeable containers 48000x2800x3000 Paper baler // Waste baler // Refuse baler Baler, 1 unit • Type: Kampwerth SHD 1600 • Year of manufacture: 2001 • Unladen weight: 3,500 kg • 15 kW • Dimensions: 5000x2300x3700 mm (disassembled for transport) Container box for baler, 3 units • Year of manufacture: 2001 Iijdpfoxm Skrjx Aacsh • Volume: 28 m³ • Unladen weight: 3,100 kg • Filling weight: 12,000 kg • Dimensions: 7000x2400 mm Location: Bielefeld

Condition: good (used), Year of construction: 1985, cutting width (max.): 550 mm, Accessories Spare blades Ijdpfx Aexpdm Rsacoih

Condition: excellent (used), Year of construction: 2003, Ref:10998 . 2003 Polar 78 X 78cm programmatic guillotine. Equipped with: Iisdpjw Sxi Hofx Aacsh Microprocessor control for with 'X' programming Colour display with operator guidance graphics Variable pressure clamp for various stocks Air table with blower 2 x knives I.R. light beam guarding.

Condition: used, Year of construction: 1989, Please contact ATS Norway for more information Please provide reference number upon request: 21250 Specifications: 1989 model Hours: 5520 Hammer is working Needs a new battery Winch and vacuum are working according to the owner Ready for delivery. Iiedpfx Ajw Ucm Ujacsh Own weight: Engine hours: 5520 Model: 712HC-01

Condition: excellent (used), Year of construction: 2021, HSM Powerline FA 500.3 Large Capacity Document Shredder Destroy large volumes of data quickly and securely with the conveyor belt document shredder The HSM Powerline FA 500.3 large capacity document shredder offers high performance when destroying your sensitive data on paper, data storage media, and credit cards. The induction-hardened solid steel cutting shafts are extremely durable and come with a lifetime warranty. They are also resistant to staples and paper clips. An integrated oiler ensures consistently high cutting performance. The powerful chain-driven motor enables continuous use of the large capacity document shredder with a consistently high throughput. The cross-cut design increases the security level when destroying your data and reduces the volume of shredded material. In addition to its high technical performance, the HSM Powerline FA 500.3 large capacity document shredder is characterized by its user-friendliness. The membrane keypad with LED display makes it easy to operate the device and view its operating status. The material is conveniently fed via the conveyor belt. The automatic rewind function eliminates paper jams and ensures a smooth workflow. The integrated light barrier starts the device automatically and shuts it down again after the paper has been fed. The emergency stop button guarantees maximum user safety. A retractable trolley for easy removal of the internal reusable collection bag (capacity 530 l) simplifies the disposal of shredded material. Thanks to the integrated casters with locking brakes and its compact design, the large document shredder requires little space and is also mobile. HSM Conveyor Belt Shredder POWERLINE FA 500.3, Cross Cut 3.9 x 40 mm with Storage Table Cutting Shafts Made of Hardened Solid Steel Powerful Motor Enables Continuous Operation Automatic Rewind Eliminates Paper Jams Convenient Material Feeding via Conveyor Belt Emergency Stop Switch Ensures User Safety Automatic Oiler for Consistently High Cutting Performance Multifunctional Element for Intuitive Operation Mobile on Casters Working Width: 500 mm Collection Capacity: 530 Liters Equipment: With Storage Table and Conveyor Belt Features: Mobile Cutting Speed: 210 mm/s Cutting Capacity in Sheets 80g/m²: 180-200 Sheets Iijdpfx Ajxm Sx Aoacoh Cutting Capacity in Sheets 70g/m²: 200-240 Sheets Material to Shred: Data Storage Media, Paper, Continuous Forms, Crumpled Paper, Credit Cards, File Folders CD/DVD, Staples, and Paper Clips Segment: Professional Security Level (DIN 66399): O-3, P-4, E-3, T-4, F-1 Security Level (DIN 32757) 3 Voltage: 400 V Frequency: 50 Hz Drive Power: 7.5 kW Sound Pressure Level: 75 dB(A) Depth: 1797 mm Width: 1168 mm Height: 1792 mm Cutting Type: Particle Particle Length: 40 mm Cutting Width: 3.9 mm Product Type: Industrial Paper Shredder Color: Anthracite Light Gray Weight: 790 kg W x H x D 1168 x 1792 x 1797 mm Year of Manufacture: May 2021 Manufacturer Price: €24,750 Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, BRAND NEW T-TYPE FLOOR TYPE MILLING MACHINE HEIDENHAIN TNC 640 digital contouring control HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 4,000 mm Z-axis: 2,000 mm Y-axis (cross-ram): 1,500 mm V-axis (cross-column): 1,000 mm Rotary table (C-axis): 2,195 x 2,195 mm Max. load capacity up to 20,000 kg Automatic universal swivel head 1° x 1° (optional with fixed quill Ø 210 mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS - internal coolant supply - 36 bar Isdpfxjq I Nlye Aacoih Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Tool changer: 60-position chain magazine (vertical/horizontal change) Double-hinged chip conveyor (longitudinal) Perimetric enclosure (open top) Only inquiries from Germany will be answered.

Condition: used, Year of construction: 1987, Work table 750mm x 1200mm Arm travel 800mm Tool holder MK 3 Drilling capacity 28mm in steel Thread cutting device Ijdpfx Aoxpfhvoacsih Coolant system Documentation

Condition: good (used), Year of construction: 1982, cutting width (max.): 760 mm, program control Iedexpdl Hspfx Aacsih

Condition: used, Year of construction: 1990, functionality: fully functional, throat depth: 360 mm, spindle speed (max.): 1,420 rpm, spindle speed (min.): 93 rpm, drilling capacity: 32 mm, drilling depth: 200 mm, table width: 560 mm, table length: 480 mm, overall weight: 570 kg, Morse taper: 4 Drilling capacity: Ø32 mm. (st. 60 kg./mm2). Quill travel: 200 mm. Throat/reach: 360 mm. RPM.: 93-1420. Table size: 560 x 480 mm. Automatic feed: Ja Motor: 1,5 HK. Year: 1990 Country of origin: Spanien. Size (L x W x H): 550 x 1000 x 2350 mm. Weight: 570 kg. Iedpfxexpfz Ns Aacoih With automatic feed, integrated coolant system in base and turning/tilting table. All our machines are tested and serviced before delivery.

Condition: ready for operation (used), functionality: fully functional, No reserve price - guaranteed sale at the highest bid! Iedpfexnzvaox Aaceih

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Iisdpfx Ajxl A A Neacoh Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: very good! Functionality checked. FLITS Rental & Sales service: with every machine we include a bundle of baling wire (120 wires). Do you require additional bundles of baling wire? Please request a complimentary quote. At FLITS Rental & Sales, you choose speed, transparency, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are very welcome to view the machines at our premises. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to advise you thoroughly and present the most suitable machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste processing

Condition: like new (used), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Good as new flat bed cutting machine. all knifes included plus compressor. Software will be provided plus support number of the dealer based in Netherlands. Isdpfoxc Nv Rjx Aacoih

Condition: used, Year of construction: 1991, Work table 600mm x 1200mm Column travel 600mm Tool holder MK 3 Iiedpoxpfgljfx Aaceh Drilling capacity 28mm in steel Tapping device Coolant system Documentation

Condition: good (used), Floor drilling machine MK3 from ERD* - MK3. Drilling machine, floor drilling machine, pillar drilling machine -Delivery: in as-is condition as inspected -Motor: HEW 0.8 kW -Table size: Ø 355 mm -Spindle holder: MK3 -Travel distance: 500 mm -Outreach: 300 mm -Pillars: Ø 110 mm -Spindle stroke: 150 mm -Transmission via: V-belt -Dimensions: 850/500/H1850 mm -Weight: 294 kg Condition: used Ijdpfxjtvfhvj Aacsih

Condition: used, Year of construction: 1997, functionality: fully functional, throat depth: 500 mm, spindle speed (max.): 1,065 rpm, spindle speed (min.): 40 rpm, drilling capacity: 60 mm, drilling depth: 260 mm, table width: 800 mm, table length: 595 mm, overall weight: 2,500 kg, thread cutting capacity: M 48, Morse taper: 5 Drilling capacity: Ø60 mm. (st. 70 kg./mm2) Thread capacity: M50. Quill travel: 260 mm. Throat/reach: 500 mm. RPM.: 40-1065. Table size: 800 x 595 mm. Automatic feed: Yes Motor: 6,6 kW. Year: 1997 Ijdpfexn Sffox Aacsih Country of origin: Spain. Size (L x W x H): 1500 x 1000 x 2975 mm. Weight: 2500 kg. With electromagnetic feed, self centering vice, OMG VH252 double head (spindle distance min. 55 mm. max. 240 mm.) and coolant system. Very heavy duty machine. New PLC mounted in 2025 All our machines are tested and serviced before delivery.

Condition: used, Year of construction: 2010, operating hours: 3,030 h, Please contact ATS Norway for more information Please provide reference number upon request: 18549 Specifications: Model year: 2010 Hours: Approximately 3030 hours Power: 55 kW Weight: Approximately 8000 kg Chassis: See pictures Belt width: Approx. 40 cm Engine: Deutz diesel engine Undercarriage commutation Winch Hydraulic water pump Remote control Toolbox Stabilizing legs Description: 2010 Comacchio MC500 drilling rig with only 3030 hours on the counter. The rig works as it should, but is missing an emergency stop wire. It can drill both horizontally and vertically, and is delivered quickly. Hours: 3030 Own weight: 8000 Total Weight: 8000 Kw: 55 Iijdpfx Asvgy E Ujacjh Model: MC 500

Condition: ready for operation (used), Year of construction: 1980, Immediately available from site: CNC table-type boring mill Juaristi Model MDR 125 Iedpjxpnc Njfx Aacjih Year of manufacture: 1980 Spindle: 125 mm Taper: SK 50 Spindle Speeds: 7 – 1000 rpm Table Size: 1520 x 1400 mm Spindle Stroke (W axis): 800 mm Travels X/Y/Z: 2000/1500/1650 mm Drive: 30 kW Weight: 18 t Available from site

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Isdpfxju Tg Spe Aacoih Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 Iodpfx Aajxn A Specsih CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: good (used), functionality: fully functional, Ideal 5221-95 EC cutting machine in good working condition. The front safety plastic cover is missing. Cutting width: 520 mm Stack height: 80 mm EP programmer with the function to save individual steps in programs. Side tables 2 spare blades (1x sharpened, 1x used) Machine can be shipped by freight forwarder upon arrangement. #8328 Iiodpfx Ajv Rlwdjacjh

Condition: like new (used), Year of construction: 2024, functionality: fully functional, spindle speed (max.): 2,100 rpm, spindle speed (min.): 75 rpm, drilling capacity: 40 mm, drilling depth: 160 mm, table width: 480 mm, table length: 480 mm, overall weight: 305 kg, thread cutting capacity: M 30, Morse taper: 4 Drilling capacity: Ø40 mm. Thread capacity: M30. Quill travel: 160 mm. Throat/reach: 300 mm. RPM.: 75-2100. Iiedpfxoxn R Rys Aacjh Table size: 480 x 480 mm. Automatic feed: Yes. Motor: 1,8/3,2 HP. Year: 2024 Country of origin: Spanien. Size (L x W x H): 705 x 500 x 2250 mm. Weight: 305 kg. Has only been used for display.