Drilling and Milling M/C

HBM TYP 16

Condition: used, Year of construction: 2001, Universal lead and feed screw lathe Manufacturer: GDW Model: LZ 360 S Year of manufacture: 2001 - workshop tested Machine no.: 1104 071 Geometric acceptance with test protocol Centre height: 175 mm Centre distance: 800 mm Rodpjy H Di Nefx Amkjcd Accessories: - 3-axis digital display FAGOR NVP 300 TS-RS with switchable constant cutting speed - Retrofit kit for converting tailstock from crank tailstock to lever drilling tailstock - Chuck guard with electrical interlock - Braked drive motor - Emergency stop (dual, left and right) - Quick-change tool post, base body size B - Bed stop - Rear chip guard - Removable chip tray - Coolant unit - 2 fixed centers MK 3/60° - Safety driver plate - Operation keys - CE declaration of conformity - CE documentation (operation manual) Used, sold as-is without warranty The machine's technical specification corresponds to the manufacturing year.

Condition: new, TC 205 x 1000 CVS Trade fair machine, color blue Technical data: Turning diameter over bed: 410 mm Center height: 205 mm Turning diameter over cross slide: 234 mm Turning diameter in offset: 610 mm Bed width: 280 mm Center distance: 1000 mm Number of spindle stages: 8 Speed range: 80 - 2000 1/min Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle mount: MK 6 Travel of tailstock spindle: 130 mm Tailstock mount: MK 4 Max. tool size: 22 mm Travel of cross slide: 225 mm Travel of top slide: 130 mm Thread inch: 2 - 72 T.P.I Thread metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splash guard rear panel - 4-way tool holder - Foot brake - Emergency stop switch - Coolant device - Chip tray Rcjdpfxsvzmtze Amked - Fixed centering point - Change gear set - Reducing sleeve for main spindle - Machine shoes - Operating tools - Operating instructions

Condition: used, Year of construction: 2013, working width 6 m Number of gangs 4 0 Number of folders 1 0 Number of rollers 1 St. Redpfxjyv Ixae Amkjcd

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 Rcsdpfx Aer Ak Rgomked – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

Condition: ready for operation (used), An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible. Rcsdsy E S D Eopfx Amkod

Year of construction: 1985, condition: good (used), Offer 22556 Technical Data: - Saw blade diameter: 420 mm - Saw blade bore: 30 mm - Max. cutting length: 3000 mm - Smallest cutting length at 90° + 45°: 335 mm - Cutting range, see diagram attached - Swiveling range inwards, manual: 90 - 22.5° - Tilting range inwards, manual: 90 - 45° Rodpfx Ajimdlrsmkocd - Saw blade speed: 2800 rpm - Drive: 380 V / 2 x 4000 Watt - Compressed air connection: 7 bar - Air consumption per working cycle, approx.: 64 l - Space requirement, approx.: W 4500 x H 1950 x D 1600 mm - Weight, approx.: 1400 kg - Including: - Cutting length adjustment with positioning control - Positioning control renewed around 2002 by WOLFF GmbH - Saw head swiveling and tilting for high and wide profiles, - as well as miter cuts

Condition: used, functionality: fully functional, fuel type: diesel, Year of construction: 2023, operating hours: 181 h, construction height: 2,310 mm, drive type: Diesel, load capacity: 2,190 kg, construction width: 1,230 mm, Farm loader Mast type: None Technical condition: very good Front tires type: pneumatic Front tires condition: 80 - 100% Rear tires type: pneumatic Rear tires condition: 80 - 100% Rcedpsvgiazefx Amkjd Rear work lights, front work lights, heating, soot filter, full cabin, CE certificate, safety light, Image serves as a symbol for quick coupler pump type: gear pump hydraulic flow rate - hydraulic pressure: 58.3 l/210 bar system pressure drive: 420 bar

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 267 mm, spindle bore: 76 mm, turning diameter: 433 mm, turning diameter over bed slide: 433 mm, turning diameter over top slide: 267 mm, turning length: 1,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 20 rpm, Turning diameter in gap: 711 mm, Colchester Mascot 1600 Gap Bed Lathe Model: Mascot 1600 Swing Over Bed: 433mm Swing Over Top Slide: 267mm Swing in Gap: 711mm Distance Between Centres : 1000mm Spindle Speeds: 20-1600 RPM Spindle Bore: 76mm Machine with: 3 – jaw chuck Rsdpfx Amoyt Nfhekecd Ainjest Threading Attachment Fixed Steady Quick Change Toolpost with holders Digital Readout High Speed Threading

Condition: reconditioned (used), functionality: fully functional, 4 speeds: 3000/6000/4500/9000 rpm. Rjdpfxsittnzj Amkscd Clockwise/counterclockwise rotation. Spindle lock via foot pedal. Milling stop with fine adjustment. Spindle diameter: 30 mm. Dust extraction at the top and bottom, each 120 mm. Spindle wrench. Open-end wrench, 41 mm. Cable + plug, 16 amps.

Condition: used, Year of construction: 2011, Technical details: turning diameter over bed: 1090 mm turning diameter over support: 690 mm turning length: 1100 mm centre distance: 6000 mm turning dia. in gap: 1250 mm centre height: 500 mm spindle passage: 152 mm range of revolution per miute: 6,3 - 1250 U/min face slide travel: 525 mm tailstock quill taper MT: MK 6 tailstock quill adjustment:: 260 mm cross feed: 0,016 - 19,45 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U number of feeds: 160 spindle bore: 155 mm total power requirement: 30 kW weight of the machine ca.: 10,65 t dimension machine xH: 8,3 x 2,0 x 1,90 m Rodpfx Amozdkz Dekjcd