Used Paper Embossing Press for sale (29,006)

Condition: used, Single-column hydraulic press SCHULZ Type SES 250 Hnsdjhl Npqopfx Aacsu . 04.86.3511/3 Year of manufacture: 1986 Pressing force: 25 tons Return force: 10 tons Throat depth: 360 mm Table size: 600 x 720 mm Ram area: 500 x 500 mm Clear hole in table: Ø 100 mm Clamping pin bore: Ø 40 mm Ram stroke: 400 mm Maximum installation height: 600 mm Table height above floor: 935 / 775 mm Hydraulic tank capacity: 380 liters Drive power: 7.5 kW Power connection: 380 Volt, 50 Hz - Adjustable fixed stop in the press cylinder 180 mm, with hand crank adjustment - SICK light barrier - Two-hand operation - Base made of 160 mm U-steel Space requirement (L x W x H): 1900 x 1300 x 3100 / 3260 mm Weight: 3.6 tons Good condition

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: very good! Functionality checked. FLITS Rental & Sales service: with every machine we include a bundle of baling wire (120 wires). Do you require additional bundles of baling wire? Please request a complimentary quote. Hsdpfx Aaexl A A Njcjnu At FLITS Rental & Sales, you choose speed, transparency, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are very welcome to view the machines at our premises. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to advise you thoroughly and present the most suitable machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste processing

Condition: used, Year of construction: 2006, functionality: fully functional, Paper/Waste Baler JONGEJANS model: DBF145_00_h00004 Number of filters: 84 Needlefelt polyester Hsdpfjxk N Dwex Aacsnu Filter surface area: 145 m² Installed components: Briquette press CS3-12 Cleaning fans 1.5 kW

Condition: good (used), Year of construction: 2012, functionality: fully functional, Compressive force 548 kN Hnedpfx Aettal Asacju The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm The weight of the equipment is 2,030 kg

Condition: good (used), Nagel Citoborma 180 Paper Drill This machine is 100% functional. This is the latest model. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. Hnedpfx Aajxk U I Iscou The installed table is an enlarged version. Additionally, the drill has an automatic table lock that releases after each cycle. Very good condition. Solid construction – weight 65 kg. 230V power supply One drilling head. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: used, Year of construction: 1979, functionality: fully functional, Machine for punching, embossing, waste stripping, and blank separating - as is - Available immediately Hedpfow Nxl Nox Aacsnu Flatbed die cutter with blank separating station Intermediate sheet inserter and pre-piling device Incl. platform 2x preparation tables 9x tool carts incl. tool frames Machine has been retrofitted for corrugated board production Options included: - Chase with quick lock - Die cutting plate for 1mm cutting plates without micrometric adjustment - Upper stripping frame with Boxplan quick lock - Mabeg feeder modified for corrugated board production, without non-stop function Specification Max. sheet size: 980 x 1375 mm Min. sheet size: 600 x 700 mm Max. cutting force: 6.0 MN (600 t) Speed: 6,500 sheets/h Processable materials: Cardboard min. 100 g/m² Cardboard up to 1,000 g/m² Corrugated board: F, E, B, C, F/F, F/E, F/B, E/E, E/B, B/B (Max. sheet warp 4%) Machine can be inspected in production.

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Hnedpfx Aetrpiioaceu Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: good (used), Year of construction: 1973, machine/vehicle number: 73040, Embossing press Baier GEBA 1/F, installation height 90 mm, pressure capacity 800 kg, working size 10cm x 14 cm, built in 1973, machine number 73040, in good condition, immediately available If you are interested, we would be happy to inform you about other machines in our company. Hnsdpfx Ajvt Rpqeacju You are welcome to view the machine in our company by prior appointment.

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 90 t, bale weight: 700 kg, type of input current: three-phase, total width: 220 mm, total height: 240 mm, overall weight: 23,000 kg, total length: 1,142 mm, filling opening width: 90 mm, filling opening length: 140 mm, bale width: 80 mm, bale length: 1,200 mm, bale height: 110 mm, tank capacity: 1,100 l, year of last overhaul: 2025, Equipment: documentation/manual, Paal Licon 250 SC Channel Baler Originally built for baling non-ferrous scrap, for the last 12 years this machine has been used at a packaging plant. It processed 700–800 tonnes of cardboard per month. Machine specifications: Hnsdoxdnn Iopfx Aacju - Length: 11.42 m - Width: 2.20 m - Pressing force: 80 t - Bale/channel dimensions: 110 x 80 cm - Feed opening: 140 x 90 cm - Machine weight: 23 t - Dual high-efficiency cooling system designed for continuous 24-hour operation in a warm workshop environment The machine floor has been overhauled; the main ram/cylinder is just six months old. The knives for trimming excess material have been replaced and upgraded for faster and more efficient operation. In 2025, the hydraulic oil was changed, distribution valves serviced, and all rollers of the main plunger/plate replaced. The pressing ram has also been refurbished. Comes with plenty of spare parts. Equipped with upgraded electronics and control panel from 2018, fully operational and ready for immediate use. Operation via touchscreen display. Comprehensive photographic documentation from the dismantling process is available. Complete technical documentation (DTR) in Polish and electrical schematics included. Testing of the machine is possible on-site. Additionally available: - Roller bale discharge system with conveyors, tipper, weighing system, and bale storage (as shown in the photos), Or optionally: - Tipping elevator for emptying 1100 L or 660 L bins - PAAL KES1750 chain channel conveyor: width 1750 mm, horizontal section 8 m, inclined section 8 m.

Condition: good (used), Year of construction: 2013, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Hjdpfx Aasttav Necjnu Dimensions 1,797 x 1,062 x 2,985 mm Bodhzadl7zw The weight of the equipment is 2,030 kg

Condition: good (used), Hang 117-01 paper drill The device is in perfect condition, 100% functional. The highest class of machines among drilling machines. Each head is independently adjustable, which allows the use of drills of different lengths. Drill table adjustable in every plane, with a lock. The spacing of the heads is adjustable with a crank. Waste directed to an external container. Hnedjvac Hhepfx Aacju Two operating speeds: 950 and 1900 rpm Technical data: number of drilling heads: 2 diameter of lights: 3-10mm stack height: 60mm drill spacing min: 45mm / max 160mm table dimensions: 780x430mm Weight: 100kg Power supply 380V The machine has documentation, maintenance tools, drills, and a new column

Condition: used, Antike Kniehebelprägepresse / Antique Embossing Hot Stamping Press Karl Krause KHP Baujahr / Year ca. 1930 - Serial-No. 48090 Hodpfxswtw E Ds Aacjnu Prägefläche / Embossing Size max. 340 x 430mm Beheizung mit Gas / Heating with Gas Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Hjdpfshrakvex Aacsnu Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Year of construction: 2001, condition: good (used), HSM-500.1_VL PRESS PAPER PRESS FILM PRESS BALER ready to use good CONDITION used & good / see photos model: HSM 500.1 VL machine no. 6135.244.P serial no. 220109689 pressing pressure 50 tons V 400; Hz 50 KW 7,5 Amp. 15,5 Pressing force 6 tons Year of manufacture 2001 more presses in our other offers article used and good / roughly cleaned (plug in and go ) dimensions: on request !!! Other photos are for further use possibility. All items seen in photos also available from us. Price quotation net per piece for pickup from stock 47441 Moers current stock 1 piece Viewing is expressly offered. Hodpjlc Du Njfx Aacenu more technology in stock see photos or ask by phone General: We offer here from various acquisitions articles, which we describe as well as possible, as well as set meaningful photos. Further details about the article can not be made. We offer the possibility of Tuesday and Thursday in the time between 9 and 16 o'clock after telephone appointment to visit. If necessary, the article can be taken away immediately. Answers to this article we can offer due to time constraints only if you provide us with a phone number when you request. This offer, unless specifically described, is USED GOODS. Any packaging may be damaged. Items have been visually inspected and are as far as technically ok. All offers ex stock 47441 Moers. If you want shipping, please contact us to discuss packaging and shipping costs. Call with interest gladly by. all dimensions are approximate Errors in the description expressly reserved.

Condition: excellent (used), BM5139 High Qaulity paper drilling machine. Hnodpfxsv Idfne Aacsu Professional production equipment standing model electric operated - foot pedal triggered heavy duty construction For paper, plastic, textiles, leather - two speed drilling. With automatic lift - two button or foot pedal operated. You are welcome to test this machine with us. We can arrange transport/packaging and loading onto truck or in container. Ask for our price - but your offers are also welcomed.

Condition: good (used), Manufacturer: Comp Tip: SB5 Engine: 2,2 KW Hedpfxjh Eic Aj Aacsnu Cylinder stroke length: 500 mm Chamber size: 500 x 350 x 400 mm

Condition: good (used), Stago PB 1006 Paper Drill Production Germany. Material adjustment in every plane (sides, front/back). Hnedpfxswunkgs Aacsu Solid construction – weight approx. 30 kg. Power supply 230V One drilling head. Drill diameter 2-10 mm. Stack height 55 mm. Drills, instructions included.

Condition: used, machine/vehicle number: 24118, Kniehebelprägepresse - Embossing Stamping Press Krause KHP Prägefläche / Stamping size: 350 x 400 mm Sehr guter Zustand / Beautiful condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Hjdpsut Tkgjfx Aacenu

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch Hnodpsv Uraasfx Aacju - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: good (used), Durselen PB 16A four-head paper drill The device is in perfect condition, like new! This is the newest one. currently produced model. Production Germany. Hodpfxou A Rr Ie Aacenu Four drilling heads with adjustable spacing. The machine has a pneumatic drill cooling system. Sliding work table. Automatic column system – a belt that is moved to the next position when worn out Technical data: Drill diameter: 2-16 mm, Stack height: 50 mm, weight: 300 kg Power supply 380V Automatic drilling cycle, controlled by a foot pedal. Smooth regulation of spindle speed and lowering speed of heads on inverters. Solid construction on a pedestal. Waste is directed to the built-in bin Drill table adjustable in every plane, front and side margins. The set includes operating tools and drills.

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available Hnodpfxsh Uhqys Aaceu space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: good (used), Durselen Corta PB-01 STE Automatic paper drill The device is in very good condition, ready to work. This is one of the newest Durselen models, the most advanced model. Hnsdju Ul Hnspfx Aacju Production Germany. 6 drilling heads with adjustable spacing. The machine has a pneumatic drill cooling system and lubrication. A programmer for controlling the table that allows you to approach programmed distances. Smooth regulation of spindle speeds and smooth regulation of the speed of lowering the heads. Waste disposal compressor Sliding column system on a tape. Technical data: Drill diameter: 2-10 mm, Stack height: 60 mm, weight: 400 kg Power supply 380V Automatic drilling cycle, controlled by a foot pedal. Solid construction on a pedestal. Waste is directed to the external pocket. The set includes operating tools, instructions, drills and sharpener.

Condition: good (used), Nagel Citoborma 180 paper drill, pedestal The device is 100% functional. Like New. Very good condition. Solid construction – weight approx. 100 kg. Hnedpfx Aaju Ul Husceu This is one of the latest models of Citoborma drills, Power supply 230V. One drilling head. Drill diameter 2-20 mm. Stack height 60 mm. The drill table is adjustable in every plane (sides, front/back). It has stops for setting the drilling spacing. Additionally, the drill has an automatic table lock that is released after each cycle. The set includes drills, tools, a new column and instructions.

Condition: good (used), Nagel Citoborma 290B Paper Drill The device is 100% functional. Very good condition, practically a new machine. Solid construction – weight 70kg. This is the currently produced model of the Citoborma drill. 380V power supply. Two drilling heads with adjustable spacing in the range of 45-170mm Drill diameter 2-20 mm. Stack height 60 mm. Controlled by a hand lever. Hjdpfx Aajwxr S Necenu Waste directed to the external sleeve. The drill table is adjustable in every plane (sides, front/back), has limiters for setting the drilling spacing (non-standard drilling), additionally a special module for standard spacing is installed in the table. What’s more, the table has two movable margins. The drill has an automatically released table lock after each cycle. Which allows you to move the table to the next position. The set includes drills, tools, and instructions.

Condition: good (used), Nagel Citoborma 280 Paper Drill The device is 100% functional. Very good condition. The drill table is adjustable in every plane (sides, front/back). It has limiters for setting the drilling spacing. The installed table is in an enlarged version. Additionally, the paper drill has an automatic table lock, which is released after each cycle. Factory condition – zero signs of wear. Solid construction – weight 76kg. 230V power supply. Hnsdpfx Ajwunmusacju Two drilling heads. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been inspected. The set includes drills and tools, a new stick, and an instruction manual.