Drilling machines

ALZMETALl AX 3SV

Condition: used, Year of construction: 1995, Technical details: bore capacity in steel (diameter): 32 mm throat: 293 mm bore stroke: 120 mm bore capacity in St 60 - full boring: 40 mm bore capacity in cast iron: Ø 38 mm spindle taper MT: MK 3 spindle throat: 293 mm spindle speed:: 160 - 2250 / seples U/min feed: 0,10 - 0,20 / manuell+automatisch mm/U Distance spindle/table max.: 55 - 642 mm table clamping surface:: 300 x 300 mm drill table adjustment: ja mm Hnodpfsx U Dkcjx Ag Uog column diameter: 115 mm distance spindle center to floor plate:: 1207 mm total power requirement: 1,9 kW weight of the machine ca.: 280 kg dimension machine xH: 0,7 x 1,0 x 1,9 m

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 milling machine equipped with a 3-axis Heidenhain TNC113 active control, notable for its ease of operation. This modern version, built in 1989, features central lubrication, an electric coolant pump, and a machine lamp, among other benefits. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site at any time. Delivery time: on request Machine no.: 2102-xxxx Table: Rigid angled table or rotary-tilt-swivel table Travel (X/Y/Z): X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Hnsdpjpy Eldofx Ag Usg Tool taper: SK40 Feed: Infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, infinitely variable feed regulation on all 3 axes, coolant unit, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines undergo thorough inspection - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - If required, you can order additional accessories such as tools, etc., directly - We can also install further equipment such as safety devices upon request - We are happy to handle shipping and/or installation

Condition: new, functionality: fully functional, Drilling capacity in St 60: 40 mm Tapping capacity in St 60: M 24 Tapping capacity in GG 20: M 30 Spindle speeds - stepless: 160-2250 rpm Short taper spindle: MT 3 Spindle stroke: 120 mm Throat: 293 mm Column diameter: 115 mm Machine table - usable surface: 515x360 mm Distance spindle/table min./max.: 117/701 mm Hnjdpfxex Sq A To Ag Ueg T-slots number - width - spacing: 2 x 14 x 224 mm Feed: 0.1 + 0.2 mm/rev Machine height: 1840 mm Standard equipment: - Main switch with lockable motor protection circuit breaker - Mushroom-head emergency stop button (latching) - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Terminal block in control cabinet (no connecting cable) - Spindle guard with electrical interlock Optional equipment: Pos. 12 LED machine light with radially adjustable light beam, connection rating 230 V, protection class IP65 Pos. 20.1 Thread cutting device with foot switch, for tapping with end-stop, max. 6 threads/min. (thread cutting capacity depends on spindle speed) Pos. 25 Coolant system B, consisting of: separate tank (33 l), pump with motor protection circuit breaker, complete fittings Pos. 37.1 Digital drilling depth indicator Zero point setting (drilling start), 5-digit LED display, character height 13 mm

Condition: used, functionality: unexamined, Auction: Plant closure Roschmann, Gersthofen (Augsburg) Bid now – sale to the highest bidder. Lot 2910019: Lot consists of 1 used high-performance column drilling machine in used condition. Visible signs of wear from workshop use, fully functional. Features: Model: ALZMETALL AX 3/SV, geared drive with variable speed control (approx. 60–1400 rpm), integrated coolant system and base tank, T-slot worktable with mounted vice, pushbutton control panel with emergency stop switch. Hsdjx N Nk Rspfx Ag Ueng

Condition: as good as new (ex-display), Column drilling machine Make: ALZMETALL Model: AX 3s iTRONIC Condition: New machine Speed 100 - 1.800 rpm. equipped as standard with: - 7" TFT - LCD display with touch function: Manual input spindle speed setpoint, Speed display actual value, Integrated drilling depth display with Touch zero point transfer, Virtual drilling depth scale in the display, Machine status displays and warnings in display, service information, Selectable operator language: DE/EN/FR/ES/IT/NL/RU. - Thread cutting device - Speed adjustment, stepless, by means of lever - Speed display, digital - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Clockwise and counterclockwise rotation via contactor control - spindle protection - Operating instructions other important technical data: - 30 mm drilling capacity in ST 60 - 140 mm quill stroke - spindle cone MK 3 - 115 mm column diameter - 1,0 / 1,6 kW motor power - 515 x 360 mm Table dimension Hnjdpfsiypz Ejx Ag Ujg with the following options: - LED machine light - automatic spindle stop - technology calculator in display - workpiece counter

Condition: new, ALZMETALL AX3/SV pillar drilling machine NEW Manufacturer: Alzmetall Type: AX3 SV Condition: New Drilling capacity steel 40 mm Thread cutting steel M24 Cast M30 Short spindle MK 3 Spindle stroke 120 mm Usable projection 293 mm Column diameter 115 mm Machine table 515 x 360 mm Distance spindle-table 117/701 mm T-slots 2 x 14 x 224 mm Feed 0.1 + 0.2 mm/rev Machine height approx. 1840 mm Net weight approx. 270 kg Drive continuously variable Motor 750/ 1500 rpm Power 1.0 / 1.6 kW Spindle speed rpm 80-1125 Additional equipment: - Reversing switch - Machine light LED Hnjdoxd Trfepfx Ag Ujg - Thread cutting device - Coolant device B Available immediately from stock

Condition: new, bore capacity in steel (diameter) 40.0 mm threading M 24 throat 293 mm bore stroke 120 mm morse taper 3 Kurzspindel MK table: 515 x 360 mm turning speeds 80 - 1125 U/min feed 0.10 + 0.20 mm/U column diameter 115 mm distance spindle /table 117 / 701 mm total power requirement 1.0 / 1.6 kW Hjdpfx Agsxaar Rs Uong weight 270 kg height of the machine 1840 mm Furnishing: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse - Operating instructions in German including special equipment: - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "B" pos. 25.

Condition: good (used), Year of construction: 1985, machine/vehicle number: 0125153, Offer 24280 Technical data: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Drill spindle holder MK 3 - Drill spindle stroke 175 mm - Drill spindle speed infinitely variable 60 - 1600 rpm - 3 feeds 0.1; 0.16; 0.25 mm/rev - throat depth 290 mm - max distance drill spindle - table / base plate 790 / 1210 mm - Table with 2 T-slots 570 x 475 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.8 kW Hnodet Hr Svjpfx Ag Ueg - Space requirement approx. W 600 x H 1950 x D 980 mm - Weight approx. 450 kg - with: - Emergency stop button - emergency stop button - lighting - Machine vice - 15 HSS drill bits 8 to 20 mm

Condition: good (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 5742, - Drilling capacity in St 60, 30 mm - Short spindle MK 3 Hjdpfeq U Swgjx Ag Ueng - Spindle stroke 120 mm - throat depth 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm - Operating voltage 380 V-50Hz - Infinitely variable speed adjustment by means of adjustment lever - Motor speed in 2 stages, 700/1435 rpm - Tapping device with direction of rotation changeover after reaching the end stops - Coolant system completely installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - New precision machine vice (test winner)

Condition: used, Year of construction: 1999, Technical details: bore capacity in steel (diameter): 32 mm throat: 293 mm bore stroke: 120 mm bore capacity in cast iron: Ø 38 mm spindle taper MT: MK 3 spindle throat: 293 mm spindle speed:: 160 - 2250 / seples U/min feed: 0,10 - 0,20 / manuell+automatisch mm/U Distance spindle/table max.: 55 - 642 mm table clamping surface:: 300 x 300 mm drill table adjustment: ja mm column diameter: 115 mm distance spindle center to floor plate:: 1207 mm total power requirement: 1,9 kW weight of the machine ca.: 280 kg dimension machine xH: 0,7 x 1,0 x 1,9 m Column drilling machine with infinitely variable speed adjustment and automatic feed. Tapping with changeover switchEquipment: RÖHM 3 - 16 mm chuck, operation by foot switch left/right * Hnjdpfxsva Hmre Ag Ueg

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm number of spindle speeds: 63 - 3.150 1/min feed stepless: 12-3000 / 6-1500 (Z) mm/min Hnsdpsk Hdu Defx Ag Usg quill stroke: 100 mm milling-head swivable +/-: 90° spindle taper ISO: SK 40 surface area: 630 x 400 mm total power requirement: 8 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2 x 1,9 x 1,95 m universal milling machine with point to point control, mechanical handwheels, swivel - rotary table (mech.) +-45°, hydr. tool clamping, half cabin, coolant device, manuals (German language) *

Condition: good (used), Year of construction: 1985, machine/vehicle number: 4888, Offer 25234 Technical Data: Hjdpfx Agowylvqo Uong - Drilling capacity in steel ST 60: 32 mm - Maximum drilling diameter in steel ST 60: 40 mm - Long spindle MK 3 - Drill spindle speeds steplessly adjustable - Range 1: 160 – 1125 rpm - Range 2: 320 – 2250 rpm - Drill spindle stroke: 120 mm - Feeds: 0.1 + 0.2 mm/rev - Throat depth: 293 mm - Column diameter: 115 mm - Table size: 300 x 300 mm - With 2 T-slots 14 x 224 mm - Emergency stop button - Machine vice - 10 pcs. HSS drill bits 10 – 25 mm - Required space approx.: W 500 x H 1750 x D 900 mm - Weight approx.: 270 kg

Condition: new, Column drilling machine Make: ALZMETALL Model: AX 3/SV Condition: New machine Speed 80 - 1.125 RPM serially equipped with: - Speed adjustment, infinitely variable - Speed display, digital - feed overload protection - spindle protection Hnedpfxsb Arche Ag Ueg - Instruction manual further important technical data: - 40 mm drilling capacity in ST 60 - 120 mm quill stroke - spindle cone MK 3 - 115 mm column diameter - feed rate 0,1 + 0,2 mm/rev - 1,0 / 1,6 kW motor power - 515 x 360 mm Table dimension

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked Hnedpothd Shofx Ag Usg - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation