Used Mubea Kbl for sale (94)

Condition: good (used), Mubea Muhr und Bender section shear combined Lhjdjncc Huopfx Al Ieh Type: KBL 16 Dimensions: 200x75x197 cm LxWxH

Condition: used, Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg Lhedpfof Ek H Uex Al Ish

Condition: used, round bar steel 33 mm square edge steel 30 mm L-beam 60 x 8 mm hole diameter in sheet thickness 20 in 13 mm hole punhing press: pressure 35 t hole punching press: throat 320 mm hole punching press: max. length of stroke 24 mm hole punching press: capacity (dia. x thick.) 30 x 9 mm hole punching press: capacity (dia. x thick.) 20 x 13 mm total power requirement 1,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,5 x 0,7 x 1,8 m Profile steel shear with: Ledox Hp Ahspfx Al Ishh - Hole punch - Notcher - Foot switch - Machine light - Mounted on a trolley

Condition: used, round bar steel 33 mm square edge steel 30 mm L-beam 60 x 8 mm Lodpfevkix Esx Al Iehh hole diameter in sheet thickness 20 in 13 mm hole punhing press: pressure 35 t hole punching press: throat 320 mm hole punching press: max. length of stroke 24 mm hole punching press: capacity (dia. x thick.) 28 x 10 mm hole punching press: capacity (dia. x thick.) 23 x 12 mm total power requirement 1,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,5 x 0,7 x 1,8 m

Condition: good (used), Year of construction: 1995, 1 used hydraulic punching machine Manufacturer: Mubea Type: KLH 500 / 610 Year of manufacture: 1995 - Punching force: 50 tons - Stroke: 60 mm Ledpfxowxy Dgs Al Iohh - Punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 mm in 4.5 mm - Throat depth: 610 mm - with support table

Condition: used, Max. punching force: 700 kN Projection: 510 mm Lhodpfx Aoq Iyvvol Ioh Cuts on the flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat iron Quick-change device Assortment of tools is included in the price Weight: 3.000 kg

Condition: used, Year of construction: 1993, Max. punching force: 1000 kN Throat: 510 mm Large support table with material stops on the punching side Electrical contact length stop for the shearing side Hydraulic hold-down device for profile and flat steel shears Cuts 500 x 20 mm on the flat steel shear Holes e.g. 40 mm diameter in 22 mm flat iron Lsdef Nwn Aepfx Al Iohh Assortment of tools is included in the price Weight: 5,000 kg

Condition: used, Price: On request Iron worker, punch press and section shear  Including Length-Stop Hersteller: Mubea / Muhr & Bender Type: Hydraulic Type: KBLH 1000 Capacity: 110 ton Shear plate: 200x26mm, 500x20mm Notching: 85x75x16mm Ledpfx Alswnhd Hs Iohh Throat: 510mm Machine-weight: 4600kg - Documentation available: No - CE certificate present: No - Drive: Hydraulic - Punching force [ton]: 110 - Punch throat depth [mm]: 510 - Options: Length stop Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0156084906226, Offer 23145 Hydraulic Flat, Profile, and Bar Steel Shear with Notching Device and Punching Unit Technical Specifications: - Flat Bar Shear - Blade length: 420 mm - For flat material: 400 x 15 mm - Profile Steel Shear - No blades installed - Angle steel at 90°: 110 x 10 mm - at 45°: 65 x 8 mm - T-steel at 90°: 90 x 10 mm - Bar Steel Shear - No blades installed - Round steel / Square steel: 35 / 32 mm - Notching device - For material up to 12 mm - Triangular notching: T 60 mm - Punching unit - Punching force: approx. 500 kN Ljdoy Ddv Repfx Al Iohh - Stroke, infinitely adjustable: 0 - 40 mm - Punches steel up to 30 mm Ø in 15 mm - Throat depth: 410 mm - Hydraulic drive: 400 V / 7.5 kW - Space required: approx. W 1400 x H 1800 x D 700 mm - Weight: approx. 1800 kg - Includes: various punches and dies, support/stop table, triangular notching unit, 2 foot pedal switches

Condition: used, Max. punching force: 700 kN Projection: 510 mm Cuts on the flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat iron Support table on punch side with stops Lodpfsumluqsx Al Iohh Assortment of tools is included in the price Weight: 3.000 Very good condition

Condition: used, Year of construction: 1986, Max. punching force: 700 kN Projection: 510 mm Cuts on the flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat iron Lhedpfsf Nwqdjx Al Ish Assortment of tools is included in the price Weight: 3,000 kg

Condition: ready for operation (used), A hydraulic profile-steel/universal steel shear with integrated punching unit Muhr & Bender is available. Punching force: 500kN, punching capacity for 15mm steel: 25mm, punching stroke: 60mm, stroke rate: 47/min, throat depth: 750mm, installation height: 215mm, working height: 1150mm, flat-steel cutting capacity X/Y: 180mm/20mm. Machine dimensions X/Y/Z: approx. 1500mm/900mm/1900mm, weight: approx. 2000kg. Includes various round and slotted punches with dies. An inspection on site is possible. Ledpex E Adpsfx Al Iohh

Condition: excellent (used), Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Mubea, hydraulic profile steel shear type HIW1000 -Drive: hydraulic Lhjdpfxjx Dclbo Al Ish -Pressure force: 100 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, notching -Dimensions: 2360/760/H1800 mm -Weight: 2700 kg

Condition: used, sheet width - max. 200 mm plate thickness 6 mm flat steel 70 x 7 mm round bar steel 13 mm weight of the machine ca. 50 kg dimensions of the machine ca. 800 x 500 x 1800 mm Lodpfeg Sx R Rex Al Iohh

Condition: used, Year of construction: 1991, round bar steel 45 mm square edge steel 42 mm L-beam 140 x 13 mm flat steel 350 x 20 mm pressure 550 kN Lhedpfxjd Ih Stj Al Ieh throat 305 mm total power requirement 5,5 kW weight of the machine ca. 1260 kg dimensions of the machine ca. 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure.

Condition: used, Pressing force: 400 kN (holes e.g. 20 m in 15 mm steel) Ledpolf Trkofx Al Iohh Cuts 150 x 10 mm at the flat bar shear Foot switch for lift release Quick change device Assortment of tools is included in the price

Condition: used, Stanzkraft: 750 kN (punching force e.g. 30 mm hole in 22 mm material), with search device via foot switch for anchoring Lhodpfx Alor R Auzo Ioh Overhang: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on the angle/flat bar shear Support table on the punching side Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Assortment of tools is included in the price

Condition: used, Stanzkraft: 550 kN (punch force, e.g. 30 m in 16 mm material), with detection/inspection arrangement via foot switch for anchoring Cuts 350 x 13 mm or 230 mm on the flat bar shear Overhang: 305 mm Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Lhjdpot Exprofx Al Ijh Support table on punching side Assortment of tools is included in the price

Condition: used, functionality: fully functional, 1 hydraulic hole punch, manufacturer MUBEA, type HP 1000 / 760. Year of manufacture 1991, punching force 100 tons. Includes punching slide for K 60-K260 and various tools, manually operated linear punching unit (grid rail 4 m), swiveling and with digital display, carriage clamping and foot switch. Dimensions L x W x H 1930 x 780 x 1980 mm. Overhang 760 mm. Working height 1135 mm. Hole diameter 40 mm in 22 mm. Stroke 0 - 70 strokes. Bdjbmm Avjtv Hzvj Eujc Stroke rate at full stroke 11 strokes. Drive power 8.5 kW. Lodpfxjza S Hzj Al Ishh Weight 3800 kg. 3600 kg. Used, in working condition.

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm Ljdpfxsu Id Ruj Al Iohh - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: used, Year of construction: 1993, Technical details: Lhjdeu Ickyopfx Al Ish throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Lhjdpfx Aexu Dxqsl Ioh Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *

Condition: used, sheet width - max.:200 mm plate thickness:4 mm Lodpfxscxxn Ej Al Ijhh dimensions of the machine ca.:0,90 x 0,50 x 2,70 m

Condition: good (used), functionality: fully functional, Punching force: 1000 kN Throat depth: 760 mm Stroke release via foot switch Lhodey U Dtkspfx Al Ioh

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors (4) pre-feed rolls 80 to 120 mts/min Max. cutoff lgth: 15 meter track Indexing wire/rod collector 30kW (40HP) AC motor Lhedpfsfkmr Sox Al Ieh Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Completely refurbished machine