Used Mori Seiki Cnc for sale (167)

Condition: ready for operation (used), Year of construction: 2006, Mori Seiki NL3000Y/1250 Turning Centre (2006) Mori Seiki MSX-850II Control Manufactured & Installed in 2006 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm C & Y Axis Tailstock 12” Chuck Swarf Conveyor Machine Capacity: Max’ Swing over Bed 995mm Max’ Swing over Cross Slide 825mm Max’ Recommended Turning Dia’ 420mm Standard Turning Dia’ 310mm Max’ Turning Length 1260mm Max’ Bar Work Dia’ 90mm X Axis Travel 210 + 70mm Y Axis Travel 120mm (+- 60) Rsdpfx Ajw Rry Neh Tsch Z Axis Travel 1370 C Axis 0.001 Spindle: Main Spindle Speeds 3000rpm 2 Spinde Ranges Spindle Nose A2-8 12” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 4522 x 2291mm Weight 8100Kgs For sale with Jet Machinery Ltd Jet Machinery Stock No: #78830 Machine Serial Number: NL301FJ0675 Cost: £55,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2007, Turning length 700 mm Max. turning dia. 460 mm Spindle speeds 4000 rpm Rcodpfxoxdhxto Ah Tsh X/Z travel 260/795 mm Turret w/12 stations Control: MSX-850 III Equipped with: Various tool holders

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 1063, turning length: 790 mm, turning diameter: 650 mm, travel distance X-axis: 350 mm, travel distance Z-axis: 860 mm, center width: 900 mm, TECHNICAL DETAILS Turning diameter: max. 650 mm Turning length: max. 790 mm Swing over bed: 890 mm Swing over cross slide: 560 mm Distance between centers: 900 mm Travel paths X-axis: 350 (25 + 325) mm Rjdsxb Amgopfx Ah Tsch Z-axis: 860 mm Main spindle Speed range: 4 – 1,010 rpm Drive power: 37 / 30 kW Max. torque: 3,870 Nm Number of speed ranges: 2 Spindle bearing diameter: 240 mm Spindle bore: 168 mm Max. bar diameter: 144 mm Usable bar diameter: 120 mm Spindle nose: JIS A2-11 Chuck diameter: 610 mm Turret Number of tool stations: 12 Square tool shank height: 32 mm Max. drill shank diameter: 65 mm Tailstock Travel: 680 mm Quill diameter: 110 mm Quill stroke: 100 mm Tailstock taper: MT 4 Feeds Rapid traverse X-axis: 5 m/min Rapid traverse Z-axis: 8 m/min Jog feed rate: 0 – 1,260 mm/min MACHINE DETAILS Control: MORIC T5F Electrical data Total power requirement: 69 kVA Frequency: 50 Hz Space requirement & weight Required space: approx. 6.0 x 3.0 x 2.6 m Machine weight: approx. 9.2 t EQUIPMENT Documentation Coolant system Tool presetting arm Three-jaw chuck Chip conveyor

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,597 h, functionality: fully functional, turning length: 424 mm, turning diameter: 370 mm, bar diameter (max.): 65 mm, turning diameter over bed slide: 370 mm, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Turning diameter: 370 mm Turning length: 424 mm Swing diameter: 370 mm X1-axis travel: 380 mm X2-axis travel: 155 mm Z1-axis travel: 460 + 155 mm Z2-axis travel: 610 mm y-axis travel: ±105 mm B-axis travel: ±120° Bar diameter: 65 mm Spindle 1 Maximum speed: 6,000 rpm Number of speed ranges: 2 (winding switch) Spindle mounting: JIS A2-5 Spindle bore: 61 mm C-axis resolution: 0.0001° Spindle diameter (front bearing): 100 mm Maximum torque (40% DC/continuous): 223/158 Nm Spindle 2 Maximum speed: 6,000 rpm Number of speed ranges: 1 Spindle mounting: 80 g6 flat nose Spindle bore: 38 mm C-axis resolution: 0.0001° Spindle diameter (front bearing): 70 mm Maximum torque (15% DC/continuous): 49/22 Nm Tool Spindle Number of tool stations: 1 Tool shank type: C5 Spindle diameter (front bearing): 65 mm Tool change time (tool to tool): 1.2 s Rcedpfxoxf A Apo Ah Tsh Maximum tool diameter with adjacent positions occupied: 70 mm Maximum tool diameter with adjacent positions free: 130 mm Maximum tool length: 250 mm Maximum tool length (over 70 mm diameter): 210 mm Maximum tool weight: 5 kg Minimum indexing increment for B-axis: 0.0001° Maximum spindle speed: 12,000 rpm Maximum torque (15% DC/continuous): 49/22 Nm Turret 2 Number of tool stations: 10 Maximum shank diameter for boring bars: max. 32 mm Feed Drives Rapid traverse X-axis (tool spindle): 40,000 mm/min Rapid traverse Y-axis (tool spindle): 40,000 mm/min Rapid traverse Z1-axis (tool spindle): 50,000 mm/min Rapid traverse X2-axis (lower turret): 30,000 mm/min Rapid traverse Z2-axis (lower turret): 30,000 mm/min Rapid traverse A-axis (workpiece unloading unit): 36,000 mm/min Rapid traverse B-axis: 100 rpm Rapid traverse C-axis: 250 rpm Tool Magazine Tool magazine: chain magazine, 76 positions Control Control: MSX-711-IV Mori Seiki Control system: MAPPS MACHINE DETAILS Power-on hours: 75,992 h Total power consumption: 45 kW Weight and Dimensions Machine weight: approx. 10.5 t Space required: approx. 2.71 × 2.43 × 2.40 m Operating Hours Head 1 Operating time: 48,606 h Machining time: 8,597 h Operating Hours Head 2 Operating time: 48,382 h Machining time: 2,664 h EQUIPMENT Renishaw HPRA Blum Laser Control Direct measuring system X, Y, Z, B SMW Autoblok KSZ-MB-040-Z140 collet chuck Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll band filter KF10/500 / HPC via milling spindle, 7-stage up to 70 bar Chip conveyor ConSep 2000

Condition: ready for operation (used), Year of construction: 1999, General Data Measurements height 2860 mm Machine weight 3800 kg Control Unit Brand MITSUBISHI Main Drive Spindle speed range 12000 rpm Spindle motor power 7.5/5.5 kW Tool taper 7/24, No. 40 Movement X-Axis Movement 510 mm Y-Axis Movement 510 mm Z-Axis Movement 510 mm Table Number of tslots 5 Table load 350 kg Tools Number of index 25 Max weight 6 kg Max tool diameter 100 mm Max tool length 250 mm Media Power consumption 22.5 kVA Rcjdpfxsxpytas Ah Teh Additional Equipment APC (Automatic Pallet Changer) - Only for CV-500A (APC): Number of Pallets: 2 Pallet Change Method: Front rotation This 3-axis MORI SEIKI CV-500 was manufactured in 1999. Ideal for precision CNC milling, this machine maintains robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the MORI SEIKI CV-500 machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 400 mm, turning diameter: 370 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 73 mm, travel distance X-axis: 380 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 480 mm, rotational speed (max.): 20,000 rpm, bar passage: 65 mm, total height: 2,670 mm, total length: 3,810 mm, chuck outer diameter: 200 mm, total width: 2,900 mm, bar diameter (max.): 65 mm, spindle nose: Capto C5, overall weight: 8,500 kg, Equipment: rotational speed infinitely variable, 🔹 For Sale: 2010 Mori Seiki NT1000SZM Mill Turn Centre – Excellent Condition – Ireland 🔹 Make: Mori Seiki Model: NT1000SZM Year: 2010 Control: MSX-711IV Machine Type: CNC Mill Turn Centre (Tool Spindle, Main Spindle, Sub Spindle, Lower Turret) Condition: Excellent Location: Ireland Availability: Immediate 📌 Description: Available for sale is a Mori Seiki NT1000SZM Mill Turn Centre, a premium multi-tasking CNC machine in excellent condition with only 16,520 cutting hours. Featuring a high-speed 20,000 rpm milling spindle, dual spindles, lower turret, and simultaneous 5-axis capability, this machine is ideal for advanced and precise mill-turn operations in the aerospace, medical, and high-precision engineering sectors. This machine is comprehensively equipped and designed to handle complex, multi-sided machining with reduced setups and high throughput. High-spec 5-axis Mori Seiki NT1000SZM Mill Turn Centre with 20,000rpm spindle, sub spindle & turret. In excellent condition. Rjdpfxstwyc So Ah Tjch 🧰 Included Equipment: Kitagawa 5" Chuck (Sub Spindle) Kitagawa 8" Hollow Chuck (Main Spindle) Full Selection of Tool Holders (as seen in videos) Swarf Conveyor 70 Bar High Pressure Coolant System Air Blow for Main Chuck and Tool Tip Tool Presetter (Tool Spindle & Turret 2) Workpiece Conveyor (Bar Feeder Spec) Bar Feed Interface Tool and Workpiece Counters Signal Tower Double Foot Switch for Both Spindles Part Program Storage (1MB) with 1000 Registerable Programs Knoll Compact Filter Unit Double-Wound Transformer 🔧 Technical Specifications: 🔹 Turning Capacity: Max Turning Diameter: 370 mm Max Turning Length: 400 mm Bar Work Capacity: 65 mm Main Spindle Through-Hole: 73 mm 🔹 Spindles: Main Spindle Speed: Up to 6,000 rpm Sub Spindle Included Spindle Drive Motor: 11/7.5 kW 🔹 Milling Tool Spindle: Max Speed: 20,000 rpm Taper: Capto C5 Tool Spindle Drive Motor: 9/5.5 kW X Axis Travel: 380 mm Y Axis Travel: 210 mm Z Axis Travel: 480 mm B Axis Tilt: ±120° C Axis: 360° 🔹 Tooling System: ATC Capacity: 76 Tools Max Tool Diameter: 130 mm Max Tool Weight: 5 kg 🔹 Dimensions & Weight: Machine Dimensions: 3810 x 2895 x 2670 mm Machine Weight: 8,500 kg ✅ Highlights: Advanced 5-Axis Mill-Turn with B-Axis Head Powerful and Flexible Dual-Spindle Configuration High-Speed Tool Spindle (20,000 rpm) with Capto C5 Fully tooled with coolant system, filters, tool holders, and more In-machine tool setting and bar feed ready Ideal for high-precision, high-complexity parts 📈 Perfect For: Aerospace machining Medical device manufacturing Precision mechanical components High-mix, low-volume or complex geometry parts CNC Mill Turn for Sale Ireland, Used Mori Seiki NT1000SZM, 5-Axis CNC Turning Centre, High-Speed Milling Lathe, CNC Machine with Sub Spindle and B Axis, Capto C5 Mill Turn, Precision Mill Turn Centre for Sale, Dual Spindle CNC Lathe with Milling

Condition: excellent (used), Year of construction: 2005, operating hours: 7,500 h, functionality: fully functional, * Mori Seiki SL 2500 Y * 4-axis machine * Sandvik Capto quick-change system valued at €22,000 * Hydraulic, programmable tailstock * 12-station turret, all stations driven * Y-axis travel: ±60 mm * C-axis * Main spindle integrated motor, 18.5 kW * Driven tool motor: 5.5 kW * Starting torque 640 Nm * Integrated, beltless main spindle motor * Main spindle nose size: A2-8 * Tailstock: Morse taper MT5 * Bar capacity: 75 mm * Main spindle chuck: Kitagawa B-210, 250 mm, metric system * Box ways on all axes * Main spindle speed: 3,500 rpm * Driven tool speed: 4,000 rpm * Swing diameter: 755 mm Rsdexrlirepfx Ah Tsch * Max. turning diameter: 390 mm * Max. turning length: 655 mm * Spindle head oil cooler: Daikin * Automatic conversational programming system: Mapps 4 * Tool load monitoring and consumption monitor * Rapid traverse speeds: 18 and 24 m/min on X and Z axes * Turret index time: 0.2 seconds * Renishaw automatic tool measurement arm * Communication ports: USB, PCMCIA card, and RS-232 * Bar feeder interface * Automatic parts catcher * Dual pedal for chuck and tailstock open/close * Side-mounted chip conveyor, hinged type * Comprehensive range of static and driven toolholders included * Electrical transformer * Documentation: parts lists, electrical diagrams, programming, and operator’s manual * Weight: 5,800 kg * Machine currently in operation * Immediate delivery unless sold

Condition: used, Year of construction: 2001, Turning length 470 mm Rsdpfxsxdfi Ne Ah Toch Max. torning dia. 390 mm Spindle speeds 3500 rpm Movements X/Z - 235/520 mm No of stations in turret 12 pcs. Control: MSG 500 Accessories: Various tool holders

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS: - CNC Control: MSX 803III - X axis travel: 260 mm - Z axis travel: 590 mm - Y axis travel: +/- 50 mm - Maximum turning diameter: 356 mm - C axis indexing increment: 0.001° - Maximum turning length: [specify mm] - Cutting feed rate X, Z, Y: [specify mm/min] Rjdpfx Ahjwdrfge Toch - Swing over bed: [specify Ø mm] - Swing over cross slide: [specify Ø mm] - Bar capacity: Ø 65 mm (main) / Ø [specify] mm (sub) - Maximum rapid traverse X, Z: [specify m/min] - Main spindle: L-SPINDLE 12” - Main spindle speed: 5,000 rpm - Main spindle power: 18.5 kW - Main spindle torque: [specify Nm] - Main spindle bore: [specify mm] - Main spindle nose: A2-6 - Sub spindle: - Sub spindle speed: 6,000 rpm - Sub spindle power: 11 kW - Sub spindle torque: [specify Nm] - Sub spindle bore: [specify mm] - Sub spindle nose: A2-5 - Upper turret tool positions: 12 - Number of driven tool stations (per turret): 12 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW EQUIPMENT: - Chip conveyor - 3-color status lamp - Fixed tool holders - Parts extractor MACHINE DIMENSIONS: - Length: 2,705 mm - Width: 2,000 mm - Height: 2,120 mm - Weight: 5,800 kg

Condition: used, Year of construction: 2001, functionality: fully functional, Japanese-built 4-axis CNC lathe for secondary machining, featuring C axis, Y axis, and driven tools. Installed in 2002 and compliant with CE standards, with the following main specifications: Turning diameter: 755 mm Workable diameter: 390 mm Workable length: 655 mm 12-position driven turret Y axis travel: +/- 60 mm C axis Spindle nose: A2-8 Rcedpfx Ajxf Iygjh Tjh Kitagawa B-210, 250 mm Spindle speed: 3,500 rpm Spindle motor: 18.5 kW Driven tool motors: 5.5 kW Driven tool speed: 4,000 rpm Bar capacity: 73 mm Tailstock: MT5 Rapid traverse speed: 18 and 24 m/min on X and Z axes Weight: 5,800 kg Complete with: - Hydraulic programmable tailstock - Box ways - Chip conveyor - Headstock oil cooling - Dual foot pedal for main chuck and tailstock open/close - Set of fixed tool holders - Set of driven tool holders - Complete manual set - CE certificate

Condition: good (used), Year of construction: 2011, machine/vehicle number: NL 201KF3443, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, rotational speed (max.): 5,000 rpm, feed rate X-axis: 30 m/min, feed rate Z-axis: 30 m/min, bar passage: 73 mm, | Category | Feature | Details | |-----|-----|----- | | General | Year of Manufacture | 2011 | | | CNC Controller | MSX-850 III or M730BM (MAPPS) | | | Number of Axes | 2 | | | Dimensions (L x W x H) | Approx. 2700 x 1920 x 2120 mm | | | Approximate Weight | 5400 kg | | Main Spindle | Spindle Nose | A2-6 | | | Spindle Motor Power | 15 kW (20 HP continuous / 26 HP peak) | | | Spindle Speed Range | 50 to 5000 rpm (up to 6000 rpm on some models) | | | Spindle Bore / Bar Capacity| 73 mm / Ø 65 mm | | Axis Travels | X Axis Travel | 260 mm | Rcedpfx Ahoxgui Rs Tsh | | Z Axis Travel | 590 mm | | Turret | Number of Tool Positions | 12 stations (BMT) | | | Tailstock (if equipped) | 564 mm travel, MT4 taper | | Machining Capacity | Max. Turning Diameter | 356 mm (over cross slide) / 366 mm (over bed) | | | Max. Turning Length | 510 mm | | | Swing Over Bed | 755 mm (over cross slide) / 924 mm (over bed) | | Standard Equipment | Chip Conveyor | Yes (optional at base version) | | | Tool Measurement | Renishaw probe (dual-arm possible) | | | High Pressure Pump | Yes | | | Lighting & Signalization | Three-color signal lamp | | | Bar Feeder Interface | For bar loader | | | Coolant Tank Capacity | 235 L | | | Others | Gantry Loader part extractor, MAPPS conversational programming, USB/RS-232 interface | Japanese precision (repeatability < 0.005 mm), robust construction for heavy-duty machining, low maintenance requirements.

Condition: excellent (used), Year of construction: 2009, CNC controller: M720BM Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 (100) Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 356 Swing over bed mm: ø 923,8 Swing over cross-slide mm: 755 Bar work capacity mm: 80 C-axis degree: 0,001° Upper turret Number of tool slots St .: 12 Speed ​​driven tools RPM: 6.000 Drive power driven tools kW: 5,5/3,7 (3 min/cont) Rsdsxcqz Ispfx Ah Tjch Indexing time s: 0,25 Main spindle Speed ​​spindle rpm: 4.000 Drive power spindle kW: 18,5/15 (25% ED/cont) Spindle bore mm: ø91 Tailstock Tailstock travel mm: 734 Holder: MT5 Equipment Chip conveyor Tool measuring arm

Condition: good (used), Year of construction: 2002, Machine is in good working condition. Redpfx Ahsxbqnxo Tech Parts shown by hand not come.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,000 h, functionality: fully functional, turning length: 750 mm, turning diameter over cross slide: 250 mm, travel distance X-axis: 140 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 410 mm, TECHNICAL DETAILS Axis Travel X-axis travel: 140 mm Y-axis travel: +/- 40 mm Z-axis travel (1+2): 450 / 410 mm Turning Capacity Turning length: 750 mm Swing diameter over cross slide: 250 mm Turning diameter: 190 mm Distance between centers: 750 mm Maximum bar diameter: 52 mm Rcsdpfsxgglkox Ah Tsh Spindle Spindle speed (max.): 4,000 rpm Spindle bore: 91 mm Spindle bearing diameter: 95 mm Main spindle speed range: 60 - 6,000 rpm Main spindle drive power: 22 / 18.5 kW Maximum torque: 198 Nm Sub-spindle (B-axis) travel: 525 mm Feeds Feed rate X (1+2): 18,000 mm/min Feed rate Y: 6,000 mm/min Feed rate Z (1+2): 24,000 mm/min Feed rate B: 24,000 mm/min Turret Number of turrets: 2 Number of tool stations: 2 x 16 positions Square shank height: 20 mm Drill shank diameter: 25 mm Turret indexing time: 0.2 s Toolholder: VDI 30 Speed range - driven tool stations (max.): 6,000 rpm Drive power - driven tool stations: 5.5 / 3.7 / 2.2 kW Rapid Traverse Rapid traverse X (1+2): 18 m/min Rapid traverse Y: 6 m/min Rapid traverse Z (1+2): 24 m/min Rapid traverse B: 24 m/min Rapid traverse C: 400 rpm MACHINE DETAILS Control: MSX 501 Dimensions & Weight Dimensions: 6500 x 3000 x 2500 mm Machine weight: approx. 5.1 t Total power requirement: 73.9 kVA Operating hours: 5,000 h EQUIPMENT LNS bar feeder

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS CNC Control: MSG-501 Axes X axis travel (mm): 215 Z axis travel (mm): 490 Rcodpfjxfv E Dex Ah Toh Y axis travel (mm): +40 / -30 Max. Turning Diameter (mm): - C-axis increment (°): 0.001 Max. Turning Length (mm): 510 Cutting feedrate X, Z, Y (mm/min): - Swing over bed (mm): Ø 300 Swing over cross slide (mm): Ø - Bar capacity (mm): Ø 56 (main) Max. rapid traverse X, Z (m/min): 24 Main Spindle Spindle speed (rpm): 5,000 Spindle power (kW): 7.5 Torque (Nm): - Main spindle bore (mm): - Main spindle nose: A2-5 Sub-Spindle Spindle speed (rpm): 5,000 Spindle power (kW): 7.5 Torque (Nm): - Sub-spindle bore (mm): - Sub-spindle nose: A2-5 Turret Number of turret positions: 12 Number of driven tool stations per turret: 12 Driven tool speed (rpm): 6,000 Driven tool power (kW): 5.5 EQUIPMENT Chip conveyor: Included LNS Quick Load Servo II bar feeder: Included Overhead Gantry. MSG-501 (Fanuc) CNC Control: Included Set of fixed and rotary tool holders: Included 3-color status lamp: Included Bar loader interface: Included Manuals: Included MACHINE DIMENSIONS Length (mm): 2,705 Width (mm): 2,000 Height (mm): 2,120 Weight (kg): 5,800

Condition: used, functionality: fully functional, 1 piece used CNC lathe Mori Seiki NZ 2000 with C-axis and driven tools. Further technical data and photos will be added. Rcsdpfx Ahsxb T Uzo Teh

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: NL251EG1087, turning length: 705 mm, turning diameter: 356 mm, spindle bore: 81 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,220 mm, total length: 3,100 mm, total width: 1,920 mm, overall weight: 6,200 kg, bar passage: 80 mm, tailstock quill stroke: 734 mm, Equipment: documentation/manual, Mori Seiki NL2500Y/700 CNC Lathe – with Y-axis – used, overhauled, and ready for operation The machine is in excellent condition, fully refurbished, and fully operational. Suitable for precision machining with Y-axis capability and driven tools. Main data: Rjdpfxevw Acke Ah Tech - Year of manufacture: 2005 - CNC: Mori Seiki MSX-850 - Max swing diameter: 755 mm - Max turning diameter: 356 mm - Max turning length: 705 mm - Bar capacity: 80 mm - Spindle bore: 81 mm Spindle and Turret: - Kitagawa BB210 3-jaw chuck (clamping range 41–254 mm) - Spindle speed: up to 4000 rpm - 12-position turret - Driven tools up to 6000 rpm - Included: 4 driven tool holders and 7 static tool holders Axes: - X-axis travel: 260 mm - Y-axis travel: ±50 mm - Z-axis travel: 795 mm - Rapid traverse X/Z: 30 m/min Other features: - Tailstock (travel 734 mm, MT3 fitting) - Belt-type chip conveyor - Tool presetting - Parts catcher Dimensions and weight: - Footprint: 3100 x 1920 x H 2220 mm - Weight: 6200 kg Machine supplied with: - 2x radial driven tool holders - 1x axial driven tool holder - 8x static tool holders (boring bar and tool holders) The machine is available for testing and immediately ready for use.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 810 mm, turning diameter over cross slide: 800 mm, turning diameter: 320 mm, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: mm 800 Swing diameter over cross slide: mm 800 Maximum turning diameter: mm 320 Standard turning diameter: mm 200 Maximum distance between the center: mm 1.130 Maximum turning length: mm 810 Maximum workpiece size: mm 300 TRAVELS Rjdpfxewlvlge Ah Toch X axis turret 1 and 2: mm 210 Y axis turret 1 and 2: mm +65 / -45 Z axis turret 1 and 2: mm 810 B axis headstock 2: mm 920 MAIN SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 SUB SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 FEED DRIVES Rapid traverse turret 1 X/Y/Z: m/min 30/20/50 Rapid traverse turret 2 X/Y/Z: m/min 30/20/50 TOOL TURRET Number of turrets: 2 Number of tool stations per turret: 16 Shaft cross – section for turning tools: mm 20 x 20 Maximum shaft diameter for boring bars: mm 32 Turret switching time (1 station): s 0,18 Maximum speed of the driven tools: rpm 6.000 Drive power for driven tools (5 min/continuous operation): kW 7,5/5,5 DIMENSIONS Installation area with chip conveyor: mm 5.120 x 2.720 Net weight: kg 8.300 Macchina equipped with: • High pressure cooling system • Bar loader interface • Gantry-type piece unloading arm • Cutting effort management system and load monitor • No. 1 double radial motorized tool holder • No. 3 axial motorized tool holders • No. 2 external tool holders • No. 2 double boring bar holders • No. 2 single radial motorized tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centering chucks diam. Mm 210 • No. 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Year of manufacturing: 2010

Condition: used, Swing Diameter Over Bed: 400 mm Swing Diameter Over Longitudinal Slide: 350 mm Distance Between Centers: 610 mm Travel Limit: 240 mm Suggested Workpiece Diameter: 200 mm Rcsdpfjxg Nd Aox Ah Tjh Max Longitudinal Travel: 560 mm Machining Length: 550 mm Max Cross Travel: 40 mm + 120 mm Height of Spindle Axis from Floor: 1135 mm Programmable Spindle Speed Range: 40 to 4000 rpm Spindle Bore Diameter: 52 mm Spindle Interior Cone: MK 6 Slide/Bed Slope: 45/45° Turret Positions: 12 Tools Main Motor: 15 kW Control: Fanuc 6T Equipped with: See photos

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: NT315HF0043, Control MSX-711 (Fanuc 3Li) for 5axes simult. Spindel A2-5 40 pos. ATC type Capto C5 Bar-feeder LNS MoveS2 INVENTORY NR.2180207, MACHINE EQUIPPED WITH : Control MSX-711 (FANUC 3Li) for 5 axes simultaneous machining, color screen 15’’ and dialog system MAPPS III Memory capacity up to 1000 programs Redpfx Ahed Hkuce Tsch Options : tools correctors (milling spindle), B tools life gestion, input of tools correctors G10, 3 interpolations, variable thread step (G34), circular threading, personalised macro, high precision contouring control (control II contour AI), card ATA 1 GB, offset tool for 5 axes machining Chips conveyor (with chain) model/500 B-axis with direct motor (DDS) ATC type CAPTO C5/ 40 positions Tools to zero setting system with automatic arm for milling spindle High-pressure cooling system type KNOLL with 500L tank, pump and paper filtration, for cooling through spindle centre Cutting fluid coolant unit Type KNOLL Linear measuring system for Axes X1 / Y / Z1 Tool monitoring system through control of main spindle motor and feed motors Automatic workpiece measuring system with touch-test RENISHAW and macro B for use in Milling spindle Light signal Automatic machine stop Workpieces receptor vat Ø52mm, L120mm 10 additional M functions Flange for cylinder, threaded ring, traction tube, bore Ø 52 Clamping chuck HAINBUCH Spanntop Axzug Nova, with stop type 100 for pieces in chuck and for jobs in bars with passage, clamping head type 32, A2-5 direct mounting, adapter Hydraulic chuck KITAGAWA, type BB206A5, Ø170mm, A2-5 direct mounting, passage Ø52mm Bar-feeder LNS, Type Move S2 Diameter of roung bars : Ø8 – 80 mm, bars length : 700 mm – 1600 mm ; loading from the front ; longitudinal shift : 470 mm ; set of guidings Ø18-20 Ø24-26 and Ø28-30 ; pushers : 1x Ø 8 – 1x Ø 15 mm ; guiding devices for main spindle Ø 21 – 26 and 31 mm Fire extinctor through carbonic gas type Tyco KLA III with 10kg CO2 Aspiration system ELBARON RON/A 3000 D-2H with full rest

Condition: used, Year of construction: 1997, MORI SEIKI SL-35 TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-35 Rcjdov N D Rtepfx Ah Tsh YEAR 1997 CONTROL FANUC MSC 516 CHUCK DIA 400.0 mm MAX. TURNING DIA 400.0 mm MAX. TURNING LENGT 780.0 mm SWING OVER BED 600.0 mm OVER CROSS SLIDE 425.0 mm MAX. SPINDLE SPEED 9-2500 rpm TURRET 12 STATIONS TAILSTOCK YES SPINDLE BORE 82.0 mm SPINDLE NOSE A8 RAPID TRAVERSE RATE X: 12,000mm/min & / Z: 15,000mm/min PLUS SWARF CONVEYOR TOOL SETTING PROBE GOOD RANGE OF TOOLING MACHINE MANUALS CLEAN

Condition: excellent (used), Year of construction: 2006, operating hours: 7,562 h, turning length: 515 mm, turning diameter: 366 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 2,705 mm, total width: 2,000 mm, overall weight: 5,500 kg, CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 590 B-axis travel mm: 624 Turning length mm: 515 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 923.8 Swing over cross-slide mm: 755 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 16 Rodpfxsu T H Dxe Ah Tsch Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5/5.5/3.7 (3min/5min/cont) Indexing time s: 0.25 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 61 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 43 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Coolant system Tank capacity liter: 235 Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Interface for Bar feeder Bar loader IEMCA MASTER 880/MP 33 LL Working time hours Potencial nominal kVA: 27.4 Basic machine dimensions / weight Length mm: 2.705 Width mm: 2.000 Height mm: 2.120 Weight kg: 5.500

Condition: excellent (used), functionality: fully functional, turning length: 530 mm, turning diameter over cross slide: 620 mm, turning diameter: 260 mm, spindle motor power: 15,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 80 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, Mori Seiki SL-25Y/500 CNC LATHE With 1.5m LNS bar feeder Control: Mori Seiki MF-T6 Tool holders: (2) Radial live tolls (2) Axial live tools (4) inside tool holders (4) outside tool holders Swing over bed: 815 mm (32.1″) Swing over cross slide: 620 mm (24.4″) Rcodpfx Aow Ett Ioh Teh Distance between centers: 620 mm (24.4″) Max. turning diameter: 260 mm (10.2″) Max. turning length: 530 mm (20.9″) X-axis travel: 195 mm +130 +65 (7.7″ + 5.1″ + 2.6″) Z-axis travel: 590 mm (23.2″) Y-axis travel: 100 mm ±50 (3.9″ ± 2.0″) Spindle speed range: 35 – 3,500 RPM Spindle nose: JIS A-8 Through spindle hole diameter: 80 mm (3.1″) Spindle bearing inner diameter: 130 mm (5.1″) Number of tool stations: 12 Shank height for square tool: 25 mm (1.0″) Shank diameter for boring bar: 50 mm (2.0″) Turret indexing time: 0.25 sec Rotary tool spindle speed: 100 – 2,000 RPM Rotary tool cutting capability: End mill max Ø20 mm, Face mill max Ø50 mm, Tap max M12 Rapid traverse rate:   X-axis: 12,000 mm/min (472.4 IPM)   Z-axis: 15,000 mm/min (590.6 IPM)   Y-axis: 10,000 mm/min (393.7 IPM) Feed per revolution:   X-axis: 0.001 – 342 mm/rev   Z-axis: 0.001 – 342 mm/rev   Y-axis: 0.001 – 500 mm/rev Jog feedrate: 6,000 mm/min (236.2 IPM) Tailstock travel: 403 mm (15.9″) Tailstock spindle diameter: 110 mm (4.3″) Tailstock spindle travel: 100 mm (3.9″) Tailstock taper: MT-5 (Live center) Spindle motor power (30 min/cont): 15/11 kW (20/15 HP) Rotary tool spindle motor: 3.7/2.2 kW (5/3 HP) Electrical power supply: 44 kVA Coolant tank capacity: 100 liters (26.4 gal) Machine height: 2,060 mm (81.1″) Floor space: 3,183 × 1,799 mm (125.3″ × 70.8″) Machine weight: 5,400 kg (11,900 lbs)

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 4017, overall weight: 4,200 kg, - Year of manufacture: 1990 - 1st owner and from own use, well maintained - Fully functional, powered, ready for demonstration - X-axis travel: 160 mm - Z-axis travel: 590 mm - Swing diameter over bed: Ø520 mm - Swing diameter over cross slide: Ø350 mm - Centre distance: 625 mm - Machining diameter: Ø230 mm - Max. machining length: 550 mm - Number of tool stations: 12 - Main spindle motor: 15/11 kW Rcedpfx Aoxgt Acoh Tjh - Control: Fanuc Series O-T - Dimensions: 2860x1520x1750 mm – 4200 kg Net price unloaded ex location Luckenwalde (Germany), without transport

Condition: good (used), Year of construction: 1998, Technical data shown on picture. Parts shown by hand not come. Redpew U Azfefx Ah Tech